Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 136 insertions, 136 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index c474486e3911..b141c35bf926 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2009-2010  Realtek Corporation.
+ * Copyright(c) 2009-2012  Realtek Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
@@ -27,8 +27,6 @@
  *
  *****************************************************************************/
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include "../wifi.h"
 #include "../efuse.h"
 #include "../base.h"
@@ -80,8 +78,8 @@ void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			break;
 		}
 	default: {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 ("switch case not process\n"));
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "switch case not processed\n");
 			break;
 		}
 	}
@@ -140,7 +138,7 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			u8 e_aci;
 
 			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
-				 ("HW_VAR_SLOT_TIME %x\n", val[0]));
+				 "HW_VAR_SLOT_TIME %x\n", val[0]);
 
 			rtl_write_byte(rtlpriv, SLOT_TIME, val[0]);
 
@@ -185,8 +183,8 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 				*val = min_spacing_to_set;
 
 				RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
-					 ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
-					  mac->min_space_cfg));
+					 "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
+					 mac->min_space_cfg);
 
 				rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
 					       mac->min_space_cfg);
@@ -201,8 +199,8 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			mac->min_space_cfg |= (density_to_set << 3);
 
 			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
-				 ("Set HW_VAR_SHORTGI_DENSITY: %#x\n",
-				  mac->min_space_cfg));
+				 "Set HW_VAR_SHORTGI_DENSITY: %#x\n",
+				 mac->min_space_cfg);
 
 			rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
 				       mac->min_space_cfg);
@@ -244,8 +242,8 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 				rtl_write_byte(rtlpriv, AGGLEN_LMT_H, regtoset);
 
 				RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
-					 ("Set HW_VAR_AMPDU_FACTOR: %#x\n",
-					  factor_toset));
+					 "Set HW_VAR_AMPDU_FACTOR: %#x\n",
+					 factor_toset);
 			}
 			break;
 		}
@@ -282,8 +280,8 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 					break;
 				default:
 					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
-						 ("HW_VAR_ACM_CTRL acm set "
-						  "failed: eACI is %d\n", acm));
+						 "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n",
+						 acm);
 					break;
 				}
 			} else {
@@ -299,13 +297,13 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 					break;
 				default:
 					RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-						 ("switch case not process\n"));
+						 "switch case not processed\n");
 					break;
 				}
 			}
 
 			RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
-				 ("HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl));
+				 "HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl);
 			rtl_write_byte(rtlpriv, AcmHwCtrl, acm_ctrl);
 			break;
 		}
@@ -404,7 +402,7 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		}
 	default:
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 ("switch case not process\n"));
+			 "switch case not processed\n");
 		break;
 	}
 
@@ -415,14 +413,14 @@ void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw)
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	u8 sec_reg_value = 0x0;
 
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("PairwiseEncAlgorithm = %d "
-		 "GroupEncAlgorithm = %d\n",
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
 		 rtlpriv->sec.pairwise_enc_algorithm,
-		 rtlpriv->sec.group_enc_algorithm));
+		 rtlpriv->sec.group_enc_algorithm);
 
 	if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
 		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
-			 ("not open hw encryption\n"));
+			 "not open hw encryption\n");
 		return;
 	}
 
@@ -433,8 +431,8 @@ void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw)
 		sec_reg_value |= SCR_RXUSEDK;
 	}
 
-	RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, ("The SECR-value %x\n",
-			sec_reg_value));
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, "The SECR-value %x\n",
+		 sec_reg_value);
 
 	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
 
@@ -718,8 +716,8 @@ static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
 
 	if (pollingcnt <= 0) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 ("Polling TXDMA_INIT_VALUE "
-			 "timeout!! Current TCR(%#x)\n", tmpu1b));
+			 "Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
+			 tmpu1b);
 		tmpu1b = rtl_read_byte(rtlpriv, CMDR);
 		rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
 		udelay(2);
@@ -870,10 +868,10 @@ static void _rtl92se_macconfig_after_fwdownload(struct ieee80211_hw *hw)
 
 		/* Change Program timing */
 		rtl_write_byte(rtlpriv, REG_EFUSE_CTRL + 3, 0x72);
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("EFUSE CONFIG OK\n"));
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "EFUSE CONFIG OK\n");
 	}
 
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("OK\n"));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "OK\n");
 
 }
 
@@ -951,12 +949,9 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	rtstatus = rtl92s_download_fw(hw);
 	if (!rtstatus) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
-			 ("Failed to download FW. "
-			 "Init HW without FW now.., Please copy FW into"
-			 "/lib/firmware/rtlwifi\n"));
-		rtlhal->fw_ready = false;
-	} else {
-		rtlhal->fw_ready = true;
+			 "Failed to download FW. Init HW without FW now... "
+			 "Please copy FW into /lib/firmware/rtlwifi\n");
+		return 1;
 	}
 
 	/* After FW download, we have to reset MAC register */
@@ -967,8 +962,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK);
 
 	/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
-	if (rtl92s_phy_mac_config(hw) != true) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("MAC Config failed\n"));
+	if (!rtl92s_phy_mac_config(hw)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
 		return rtstatus;
 	}
 
@@ -977,8 +972,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	rtl_write_dword(rtlpriv, CMDR, 0x37FC);
 
 	/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
-	if (rtl92s_phy_bb_config(hw) != true) {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, ("BB Config failed\n"));
+	if (!rtl92s_phy_bb_config(hw)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
 		return rtstatus;
 	}
 
@@ -1013,8 +1008,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	else
 		rtl_write_byte(rtlpriv, RF_CTRL, 0x07);
 
-	if (rtl92s_phy_rf_config(hw) != true) {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("RF Config failed\n"));
+	if (!rtl92s_phy_rf_config(hw)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
 		return rtstatus;
 	}
 
@@ -1110,7 +1105,7 @@ void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 	if (check_bssid) {
 		reg_rcr |= (RCR_CBSSID);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
-	} else if (check_bssid == false) {
+	} else if (!check_bssid) {
 		reg_rcr &= (~RCR_CBSSID);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
 	}
@@ -1129,26 +1124,26 @@ static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
 	case NL80211_IFTYPE_UNSPECIFIED:
 		bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT);
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
-			 ("Set Network type to NO LINK!\n"));
+			 "Set Network type to NO LINK!\n");
 		break;
 	case NL80211_IFTYPE_ADHOC:
 		bt_msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT);
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
-			 ("Set Network type to Ad Hoc!\n"));
+			 "Set Network type to Ad Hoc!\n");
 		break;
 	case NL80211_IFTYPE_STATION:
 		bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT);
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
-			 ("Set Network type to STA!\n"));
+			 "Set Network type to STA!\n");
 		break;
 	case NL80211_IFTYPE_AP:
 		bt_msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT);
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
-			 ("Set Network type to AP!\n"));
+			 "Set Network type to AP!\n");
 		break;
 	default:
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 ("Network type %d not support!\n", type));
+			 "Network type %d not supported!\n", type);
 		return 1;
 		break;
 
@@ -1202,7 +1197,7 @@ void rtl92se_set_qos(struct ieee80211_hw *hw, int aci)
 		rtl_write_dword(rtlpriv, EDCAPARA_VO, 0x2f3222);
 		break;
 	default:
-		RT_ASSERT(false, ("invalid aci: %d !\n", aci));
+		RT_ASSERT(false, "invalid aci: %d !\n", aci);
 		break;
 	}
 }
@@ -1219,9 +1214,14 @@ void rtl92se_enable_interrupt(struct ieee80211_hw *hw)
 
 void rtl92se_disable_interrupt(struct ieee80211_hw *hw)
 {
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_priv *rtlpriv;
+	struct rtl_pci *rtlpci;
 
+	rtlpriv = rtl_priv(hw);
+	/* if firmware not available, no interrupts */
+	if (!rtlpriv || !rtlpriv->max_fw_size)
+		return;
+	rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	rtl_write_dword(rtlpriv, INTA_MASK, 0);
 	rtl_write_dword(rtlpriv, INTA_MASK + 4, 0);
 
@@ -1583,8 +1583,8 @@ void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw,
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
-	RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
-		 ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr));
+	RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n",
+		 add_msr, rm_msr);
 
 	if (add_msr)
 		rtlpci->irq_mask[0] |= add_msr;
@@ -1627,7 +1627,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 
 	if (rtlefuse->epromtype == EEPROM_93C46) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 ("RTL819X Not boot from eeprom, check it !!"));
+			 "RTL819X Not boot from eeprom, check it !!\n");
 	} else if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
 		rtl_efuse_shadow_map_update(hw);
 
@@ -1636,16 +1636,16 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 			HWSET_MAX_SIZE_92S);
 	}
 
-	RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"),
+	RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP",
 		      hwinfo, HWSET_MAX_SIZE_92S);
 
 	eeprom_id = *((u16 *)&hwinfo[0]);
 	if (eeprom_id != RTL8190_EEPROM_ID) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
-			 ("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
+			 "EEPROM ID(%#x) is invalid!!\n", eeprom_id);
 		rtlefuse->autoload_failflag = true;
 	} else {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
 		rtlefuse->autoload_failflag = false;
 	}
 
@@ -1663,15 +1663,15 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 	rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
 
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			("EEPROMId = 0x%4x\n", eeprom_id));
+		 "EEPROMId = 0x%4x\n", eeprom_id);
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			("EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid));
+		 "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid);
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			("EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did));
+		 "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did);
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			("EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid));
+		 "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid);
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			("EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid));
+		 "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
 
 	for (i = 0; i < 6; i += 2) {
 		usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
@@ -1681,8 +1681,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 	for (i = 0; i < 6; i++)
 		rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
 
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
-		 ("%pM\n", rtlefuse->dev_addr));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr);
 
 	/* Get Tx Power Level by Channel */
 	/* Read Tx power of Channel 1 ~ 14 from EEPROM. */
@@ -1707,23 +1706,24 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 	for (rf_path = 0; rf_path < 2; rf_path++)
 		for (i = 0; i < 3; i++)
 			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
-				("RF(%d) EEPROM CCK Area(%d) = 0x%x\n", rf_path,
-				i, rtlefuse->eeprom_chnlarea_txpwr_cck
-					[rf_path][i]));
+				"RF(%d) EEPROM CCK Area(%d) = 0x%x\n",
+				rf_path, i,
+				rtlefuse->eeprom_chnlarea_txpwr_cck
+				[rf_path][i]);
 	for (rf_path = 0; rf_path < 2; rf_path++)
 		for (i = 0; i < 3; i++)
 			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
-				("RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
-				 rf_path, i,
-				 rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
-						[rf_path][i]));
+				"RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
+				rf_path, i,
+				rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+				[rf_path][i]);
 	for (rf_path = 0; rf_path < 2; rf_path++)
 		for (i = 0; i < 3; i++)
 			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
-				("RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
-				 rf_path, i,
-				 rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
-					[rf_path][i]));
+				"RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
+				rf_path, i,
+				rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
+				[rf_path][i]);
 
 	for (rf_path = 0; rf_path < 2; rf_path++) {
 
@@ -1754,11 +1754,11 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 
 		for (i = 0; i < 14; i++) {
 			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
-				("RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = "
-				 "[0x%x / 0x%x / 0x%x]\n", rf_path, i,
-				 rtlefuse->txpwrlevel_cck[rf_path][i],
-				 rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
-				 rtlefuse->txpwrlevel_ht40_2s[rf_path][i]));
+				"RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n",
+				rf_path, i,
+				rtlefuse->txpwrlevel_cck[rf_path][i],
+				rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
+				rtlefuse->txpwrlevel_ht40_2s[rf_path][i]);
 		}
 	}
 
@@ -1791,13 +1791,13 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 				0xf0) >> 4);
 
 			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
-				("RF-%d pwrgroup_ht20[%d] = 0x%x\n",
-				 rf_path, i,
-				 rtlefuse->pwrgroup_ht20[rf_path][i]));
+				"RF-%d pwrgroup_ht20[%d] = 0x%x\n",
+				rf_path, i,
+				rtlefuse->pwrgroup_ht20[rf_path][i]);
 			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
-				("RF-%d pwrgroup_ht40[%d] = 0x%x\n",
-				 rf_path, i,
-				 rtlefuse->pwrgroup_ht40[rf_path][i]));
+				"RF-%d pwrgroup_ht40[%d] = 0x%x\n",
+				rf_path, i,
+				rtlefuse->pwrgroup_ht40[rf_path][i]);
 			}
 	}
 
@@ -1852,27 +1852,27 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 				 (hwinfo[EEPROM_REGULATORY] & 0x1);
 	}
 	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
-		("eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory));
+		"eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory);
 
 	for (i = 0; i < 14; i++)
 		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
-			("RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", i,
-			 rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]));
+			"RF-A Ht20 to HT40 Diff[%d] = 0x%x\n",
+			i, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]);
 	for (i = 0; i < 14; i++)
 		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
-			("RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", i,
-			 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]));
+			"RF-A Legacy to Ht40 Diff[%d] = 0x%x\n",
+			i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]);
 	for (i = 0; i < 14; i++)
 		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
-			("RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", i,
-			 rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]));
+			"RF-B Ht20 to HT40 Diff[%d] = 0x%x\n",
+			i, rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]);
 	for (i = 0; i < 14; i++)
 		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
-			("RF-B Legacy to HT40 Diff[%d] = 0x%x\n", i,
-			 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]));
+			"RF-B Legacy to HT40 Diff[%d] = 0x%x\n",
+			i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]);
 
-	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPwrSafetyFlag = %d\n",
-		rtlefuse->txpwr_safetyflag));
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+		"TxPwrSafetyFlag = %d\n", rtlefuse->txpwr_safetyflag);
 
 	/* Read RF-indication and Tx Power gain
 	 * index diff of legacy to HT OFDM rate. */
@@ -1881,8 +1881,8 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 	rtlefuse->legacy_httxpowerdiff =
 		rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0];
 
-	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPowerDiff = %#x\n",
-		rtlefuse->eeprom_txpowerdiff));
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+		"TxPowerDiff = %#x\n", rtlefuse->eeprom_txpowerdiff);
 
 	/* Get TSSI value for each path. */
 	usvalue = *(u16 *)&hwinfo[EEPROM_TSSI_A];
@@ -1890,16 +1890,16 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 	usvalue = *(u8 *)&hwinfo[EEPROM_TSSI_B];
 	rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff);
 
-	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TSSI_A = 0x%x, TSSI_B = 0x%x\n",
-		 rtlefuse->eeprom_tssi[RF90_PATH_A],
-		 rtlefuse->eeprom_tssi[RF90_PATH_B]));
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, "TSSI_A = 0x%x, TSSI_B = 0x%x\n",
+		rtlefuse->eeprom_tssi[RF90_PATH_A],
+		rtlefuse->eeprom_tssi[RF90_PATH_B]);
 
 	/* Read antenna tx power offset of B/C/D to A  from EEPROM */
 	/* and read ThermalMeter from EEPROM */
 	tempval = *(u8 *)&hwinfo[EEPROM_THERMALMETER];
 	rtlefuse->eeprom_thermalmeter = tempval;
-	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("thermalmeter = 0x%x\n",
-		rtlefuse->eeprom_thermalmeter));
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+		"thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter);
 
 	/* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */
 	rtlefuse->thermalmeter[0] = (rtlefuse->eeprom_thermalmeter & 0x1f);
@@ -1915,8 +1915,8 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 	/* Version ID, Channel plan */
 	rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
 	rtlefuse->txpwr_fromeprom = true;
-	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("EEPROM ChannelPlan = 0x%4x\n",
-		rtlefuse->eeprom_channelplan));
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+		"EEPROM ChannelPlan = 0x%4x\n", rtlefuse->eeprom_channelplan);
 
 	/* Read Customer ID or Board Type!!! */
 	tempval = *(u8 *)&hwinfo[EEPROM_BOARDTYPE];
@@ -1937,14 +1937,14 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 		if (!(tempval & BIT(0))) {
 			rtlefuse->b1x1_recvcombine = true;
 			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-				("RF_TYPE=1T2R but only 1SS\n"));
+				 "RF_TYPE=1T2R but only 1SS\n");
 		}
 	}
 	rtlefuse->b1ss_support = rtlefuse->b1x1_recvcombine;
 	rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMID];
 
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("EEPROM Customer ID: 0x%2x",
-			rtlefuse->eeprom_oemid));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM Customer ID: 0x%2x",
+		 rtlefuse->eeprom_oemid);
 
 	/* set channel paln to world wide 13 */
 	rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
@@ -1959,19 +1959,19 @@ void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
 	tmp_u1b = rtl_read_byte(rtlpriv, EPROM_CMD);
 
 	if (tmp_u1b & BIT(4)) {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n"));
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n");
 		rtlefuse->epromtype = EEPROM_93C46;
 	} else {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n"));
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n");
 		rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
 	}
 
 	if (tmp_u1b & BIT(5)) {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
 		rtlefuse->autoload_failflag = false;
 		_rtl92se_read_adapter_info(hw);
 	} else {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n"));
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
 		rtlefuse->autoload_failflag = true;
 	}
 }
@@ -2071,8 +2071,8 @@ static void rtl92se_update_hal_rate_table(struct ieee80211_hw *hw,
 	else
 		rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_BG);
 
-	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
-		 ("%x\n", rtl_read_dword(rtlpriv, ARFR0)));
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
+		 rtl_read_dword(rtlpriv, ARFR0));
 }
 
 static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw,
@@ -2224,8 +2224,8 @@ static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw,
 
 	mask |= (bmulticast ? 1 : 0) << 9 | (macid & 0x1f) << 4 | (band & 0xf);
 
-	RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, ("mask = %x, bitmap = %x\n",
-			mask, ratr_bitmap));
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, "mask = %x, bitmap = %x\n",
+		 mask, ratr_bitmap);
 	rtl_write_dword(rtlpriv, 0x2c4, ratr_bitmap);
 	rtl_write_dword(rtlpriv, WFM5, (FW_RA_UPDATE_MASK | (mask << 8)));
 
@@ -2301,14 +2301,14 @@ bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
 
 	if ((ppsc->hwradiooff) && (rfpwr_toset == ERFON)) {
 		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
-			 ("RFKILL-HW Radio ON, RF ON\n"));
+			 "RFKILL-HW Radio ON, RF ON\n");
 
 		rfpwr_toset = ERFON;
 		ppsc->hwradiooff = false;
 		actuallyset = true;
-	} else if ((ppsc->hwradiooff == false) && (rfpwr_toset == ERFOFF)) {
-		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
-			 ("RFKILL-HW Radio OFF, RF OFF\n"));
+	} else if ((!ppsc->hwradiooff) && (rfpwr_toset == ERFOFF)) {
+		RT_TRACE(rtlpriv, COMP_RF,
+			 DBG_DMESG, "RFKILL-HW Radio OFF, RF OFF\n");
 
 		rfpwr_toset = ERFOFF;
 		ppsc->hwradiooff = true;
@@ -2372,7 +2372,7 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
 		u8 cam_offset = 0;
 		u8 clear_number = 5;
 
-		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n"));
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n");
 
 		for (idx = 0; idx < clear_number; idx++) {
 			rtl_cam_mark_invalid(hw, cam_offset + idx);
@@ -2401,7 +2401,7 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
 			break;
 		default:
 			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-					("switch case not process\n"));
+				 "switch case not processed\n");
 			enc_algo = CAM_TKIP;
 			break;
 		}
@@ -2419,9 +2419,8 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
 								 p_macaddr);
 					if (entry_id >=  TOTAL_CAM_ENTRY) {
 						RT_TRACE(rtlpriv,
-						   COMP_SEC, DBG_EMERG,
-						   ("Can not find free hw"
-						   " security cam entry\n"));
+							 COMP_SEC, DBG_EMERG,
+							 "Can not find free hw security cam entry\n");
 						return;
 					}
 				} else {
@@ -2435,30 +2434,31 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
 
 		if (rtlpriv->sec.key_len[key_index] == 0) {
 			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
-				 ("delete one entry, entry_id is %d\n",
-				 entry_id));
+				 "delete one entry, entry_id is %d\n",
+				 entry_id);
 			if (mac->opmode == NL80211_IFTYPE_AP)
 				rtl_cam_del_entry(hw, p_macaddr);
 			rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
 		} else {
 			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
-				 ("The insert KEY length is %d\n",
-				  rtlpriv->sec.key_len[PAIRWISE_KEYIDX]));
+				 "The insert KEY length is %d\n",
+				 rtlpriv->sec.key_len[PAIRWISE_KEYIDX]);
 			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
-				 ("The insert KEY  is %x %x\n",
-				  rtlpriv->sec.key_buf[0][0],
-				  rtlpriv->sec.key_buf[0][1]));
+				 "The insert KEY is %x %x\n",
+				 rtlpriv->sec.key_buf[0][0],
+				 rtlpriv->sec.key_buf[0][1]);
 
 			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
-				 ("add one entry\n"));
+				 "add one entry\n");
 			if (is_pairwise) {
 				RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
-				      "Pairwiase Key content :",
-				       rtlpriv->sec.pairwise_key,
-				       rtlpriv->sec.key_len[PAIRWISE_KEYIDX]);
+					      "Pairwise Key content",
+					      rtlpriv->sec.pairwise_key,
+					      rtlpriv->sec.
+					      key_len[PAIRWISE_KEYIDX]);
 
 				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
-					 ("set Pairwiase key\n"));
+					 "set Pairwise key\n");
 
 				rtl_cam_add_one_entry(hw, macaddr, key_index,
 					entry_id, enc_algo,
@@ -2466,7 +2466,7 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
 					rtlpriv->sec.key_buf[key_index]);
 			} else {
 				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
-					 ("set group key\n"));
+					 "set group key\n");
 
 				if (mac->opmode == NL80211_IFTYPE_ADHOC) {
 					rtl_cam_add_one_entry(hw,