Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

1 files changed, 200 insertions, 215 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
index 32e135ab9a63..79103347d967 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
@@ -11,10 +11,6 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
  * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
@@ -30,297 +26,286 @@
 #ifndef __RTL8723E_PWRSEQ_H__
 #define __RTL8723E_PWRSEQ_H__
 
-/*
-	Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
-	There are 6 HW Power States:
-	0: POFF--Power Off
-	1: PDN--Power Down
-	2: CARDEMU--Card Emulation
-	3: ACT--Active Mode
-	4: LPS--Low Power State
-	5: SUS--Suspend
-
-	The transision from different states are defined below
-	TRANS_CARDEMU_TO_ACT
-	TRANS_ACT_TO_CARDEMU
-	TRANS_CARDEMU_TO_SUS
-	TRANS_SUS_TO_CARDEMU
-	TRANS_CARDEMU_TO_PDN
-	TRANS_ACT_TO_LPS
-	TRANS_LPS_TO_ACT
-
-	TRANS_END
-	PWR SEQ Version: rtl8188e_PwrSeq_V09.h
-*/
-
-#define	RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS	10
-#define	RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS	10
-#define	RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS	10
-#define	RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS	10
-#define	RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS	10
-#define	RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS	10
-#define	RTL8188E_TRANS_ACT_TO_LPS_STEPS		15
-#define	RTL8188E_TRANS_LPS_TO_ACT_STEPS		15
-#define	RTL8188E_TRANS_END_STEPS		1
+#include "pwrseqcmd.h"
+/* Check document WM-20110607-Paul-RTL8188EE_Power_Architecture-R02.vsd
+ *	There are 6 HW Power States:
+ *	0: POFF--Power Off
+ *	1: PDN--Power Down
+ *	2: CARDEMU--Card Emulation
+ *	3: ACT--Active Mode
+ *	4: LPS--Low Power State
+ *	5: SUS--Suspend
+ *
+ *	The transision from different states are defined below
+ *	TRANS_CARDEMU_TO_ACT
+ *	TRANS_ACT_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_SUS
+ *	TRANS_SUS_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_PDN
+ *	TRANS_ACT_TO_LPS
+ *	TRANS_LPS_TO_ACT
+ *
+ *	TRANS_END
+ *	PWR SEQ Version: rtl8188ee_PwrSeq_V09.h
+ */
 
+#define	RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS	10
+#define	RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS	10
+#define	RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS	10
+#define	RTL8188EE_TRANS_SUS_TO_CARDEMU_STEPS	10
+#define	RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS	10
+#define	RTL8188EE_TRANS_PDN_TO_CARDEMU_STEPS	10
+#define	RTL8188EE_TRANS_ACT_TO_LPS_STEPS		15
+#define	RTL8188EE_TRANS_LPS_TO_ACT_STEPS		15
+#define	RTL8188EE_TRANS_END_STEPS		1
 
-#define RTL8188E_TRANS_CARDEMU_TO_ACT					\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+/* The following macros have the following format:
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
+ *   comments },
+ */
+#define RTL8188EE_TRANS_CARDEMU_TO_ACT					\
 	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/* wait till 0x04[17] = 1    power ready*/			\
-	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)		\
+	/* wait till 0x04[17] = 1    power ready*/},			\
 	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/* 0x02[1:0] = 0	reset BB*/				\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0		\
+	/* 0x02[1:0] = 0	reset BB*/},				\
 	{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*0x24[23] = 2b'01 schmit trigger */				\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)			\
+	/*0x24[23] = 2b'01 schmit trigger */},				\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/* 0x04[15] = 0 disable HWPDN (control by DRV)*/		\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0			\
+	/* 0x04[15] = 0 disable HWPDN (control by DRV)*/},		\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*0x04[12:11] = 2b'00 disable WL suspend*/			\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0		\
+	/*0x04[12:11] = 2b'00 disable WL suspend*/},			\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*0x04[8] = 1 polling until return 0*/				\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)			\
+	/*0x04[8] = 1 polling until return 0*/},			\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*wait till 0x04[8] = 0*/					\
-	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0			\
+	/*wait till 0x04[8] = 0*/},					\
 	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*LDO normal mode*/\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0			\
+	/*LDO normal mode*/},						\
 	{0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*SDIO Driving*/\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)			\
+	/*SDIO Driving*/},
 
-#define RTL8188E_TRANS_ACT_TO_CARDEMU					\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+#define RTL8188EE_TRANS_ACT_TO_CARDEMU					\
 	{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0			\
+	/*0x1F[7:0] = 0 turn off RF*/},					\
 	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*LDO Sleep mode*/\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)			\
+	/*LDO Sleep mode*/},						\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*0x04[9] = 1 turn off MAC by HW state machine*/		\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)			\
+	/*0x04[9] = 1 turn off MAC by HW state machine*/},		\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*wait till 0x04[9] = 0 polling until return 0 to disable*/	\
-	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0			\
+	/*wait till 0x04[9] = 0 polling until return 0 to disable*/},
 
-
-#define RTL8188E_TRANS_CARDEMU_TO_SUS					\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+#define RTL8188EE_TRANS_CARDEMU_TO_SUS					\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
-	/*0x04[12:11] = 2b'01enable WL suspend*/			\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)},	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)		\
+	/*0x04[12:11] = 2b'01enable WL suspend*/},			\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
-	/*0x04[12:11] = 2b'11enable WL suspend for PCIe*/		\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4)},\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4)	\
+	/*0x04[12:11] = 2b'11enable WL suspend for PCIe*/},		\
 	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
-	/*  0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7)},			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7)			\
+	/*  0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */},\
 	{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
-	/*Clear SIC_EN register 0x40[12] = 1'b0 */			\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0			\
+	/*Clear SIC_EN register 0x40[12] = 1'b0 */},			\
 	{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
-	/*Set USB suspend enable local register  0xfe10[4]= 1 */	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)			\
+	/*Set USB suspend enable local register  0xfe10[4]=1 */},	\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	/*Set SDIO suspend local register*/				\
-	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)		\
+	/*Set SDIO suspend local register*/},				\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	/*wait power state to suspend*/					\
-	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0			\
+	/*wait power state to suspend*/},
 
-#define RTL8188E_TRANS_SUS_TO_CARDEMU					\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_SUS_TO_CARDEMU					\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	/*Set SDIO suspend local register*/				\
-	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0},			\
+	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0			\
+	/*Set SDIO suspend local register*/},				\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	/*wait power state to suspend*/					\
-	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)		\
+	/*wait power state to suspend*/},				\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*0x04[12:11] = 2b'01enable WL suspend*/			\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0},
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0		\
+	/*0x04[12:11] = 2b'01enable WL suspend*/},
 
-#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS				\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_CARDEMU_TO_CARDDIS				\
 	{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*0x24[23] = 2b'01 schmit trigger */				\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)			\
+	/*0x24[23] = 2b'01 schmit trigger */},				\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
-	/*0x04[12:11] = 2b'01 enable WL suspend*/			\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)},	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)	\
+	/*0x04[12:11] = 2b'01 enable WL suspend*/},			\
 	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
-	/*  0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0			\
+	/*  0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */},\
 	{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
 	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
-	/*Clear SIC_EN register 0x40[12] = 1'b0 */			\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0			\
+	/*Clear SIC_EN register 0x40[12] = 1'b0 */},			\
 	{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
-	/*Set USB suspend enable local register  0xfe10[4]= 1 */	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)			\
+	/*Set USB suspend enable local register  0xfe10[4]=1 */},	\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	/*Set SDIO suspend local register*/				\
-	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)		\
+	/*Set SDIO suspend local register*/},				\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/
+	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0			\
+	/*wait power state to suspend*/},
 
-#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU				\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_CARDDIS_TO_CARDEMU				\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	PWR_BASEADDR_SDIO,\
-	PWR_CMD_WRITE, BIT(0), 0}, /*Set SDIO suspend local register*/	\
+	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0			\
+	/*Set SDIO suspend local register*/},				\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	PWR_BASEADDR_SDIO,\
-	PWR_CMD_POLLING, BIT(1), BIT(1)}, /*wait power state to suspend*/\
+	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)		\
+	/*wait power state to suspend*/},				\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC,						\
-	PWR_CMD_WRITE, BIT(3)|BIT(4), 0},				\
-	/*0x04[12:11] = 2b'01enable WL suspend*/
-
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0		\
+	/*0x04[12:11] = 2b'01enable WL suspend*/},
 
-#define RTL8188E_TRANS_CARDEMU_TO_PDN					\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_CARDEMU_TO_PDN					\
 	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0/* 0x04[16] = 0*/},	\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/
-
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)			\
+	/* 0x04[15] = 1*/},
 
-#define RTL8188E_TRANS_PDN_TO_CARDEMU					\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_PDN_TO_CARDEMU					\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0/* 0x04[15] = 0*/},
 
-
-#define RTL8188E_TRANS_ACT_TO_LPS					\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+#define RTL8188EE_TRANS_ACT_TO_LPS					\
 	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F			\
+	/*Tx Pause*/},							\
 	{0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*zero if no pkt is tx*/\
-	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0			\
+	/*Should be zero if no packet is transmitting*/},		\
 	{0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*Should be zero if no packet is transmitting*/	\
-	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0			\
+	/*Should be zero if no packet is transmitting*/},		\
 	{0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*Should be zero if no packet is transmitting*/			\
-	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0			\
+	/*Should be zero if no packet is transmitting*/},		\
 	{0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*Should be zero if no packet is transmitting*/			\
-	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0			\
+	/*Should be zero if no packet is transmitting*/},		\
 	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*CCK and OFDM are disabled, and clock are gated*/		\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0			\
+	/*CCK and OFDM are disabled,and clock are gated*/},		\
 	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/\
+	PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US		\
+	/*Delay 1us*/},							\
 	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F			\
+	/*Reset MAC TRX*/},						\
 	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*check if removed later*/					\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0			\
+	/*check if removed later*/},					\
 	{0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*Respond TxOK to scheduler*/					\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)			\
+	/*Respond TxOK to scheduler*/},
 
 
-#define RTL8188E_TRANS_LPS_TO_ACT					\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_LPS_TO_ACT					\
 	{0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
-	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/	\
+	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84			\
+	/*SDIO RPWM*/},							\
 	{0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84			\
+	/*USB RPWM*/},							\
 	{0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84			\
+	/*PCIe RPWM*/},							\
 	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/	\
+	PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS		\
+	/*Delay*/},							\
 	{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*.	0x08[4] = 0		 switch TSF to 40M*/		\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0			\
+	/*.	0x08[4] = 0		 switch TSF to 40M*/},		\
 	{0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*Polling 0x109[7]= 0  TSF in 40M*/				\
-	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0},			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0			\
+	/*Polling 0x109[7]=0  TSF in 40M*/},				\
 	{0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*. 0x29[7:6] = 2b'00	 enable BB clock*/			\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0		\
+	/*.	0x29[7:6] = 2b'00	 enable BB clock*/},		\
 	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*.	0x101[1] = 1*/\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)			\
+	/*.	0x101[1] = 1*/},					\
 	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*.	0x100[7:0] = 0xFF	 enable WMAC TRX*/\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF			\
+	/*.	0x100[7:0] = 0xFF	 enable WMAC TRX*/},		\
 	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
-	/*. 0x02[1:0] = 2b'11  enable BB macro*/\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)},	\
-	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
-	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*.	0x522 = 0*/
-
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)	\
+	/*.	0x02[1:0] = 2b'11	 enable BB macro*/},		\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0			\
+	/*.	0x522 = 0*/},
 
-#define RTL8188E_TRANS_END						\
-	/* format */							\
-	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+#define RTL8188EE_TRANS_END		\
 	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
 	0, PWR_CMD_END, 0, 0}
 
-extern struct wlan_pwr_cfg rtl8188e_power_on_flow
-		[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS +
-		RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_radio_off_flow
-		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
-		RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_card_disable_flow
-		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
-		RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
-		RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_card_enable_flow
-		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
-		RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
-		RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_suspend_flow
-		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
-		RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
-		RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_resume_flow
-		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
-		RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
-		RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_hwpdn_flow
-		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
-		RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
-		RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_enter_lps_flow
-		[RTL8188E_TRANS_ACT_TO_LPS_STEPS +
-		RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_leave_lps_flow
-		[RTL8188E_TRANS_LPS_TO_ACT_STEPS +
-		RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_power_on_flow
+		[RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS +
+		 RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_radio_off_flow
+		[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+		 RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_card_disable_flow
+		[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+		 RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+		 RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_card_enable_flow
+		[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+		 RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+		 RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_suspend_flow
+		[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+		 RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS +
+		 RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_resume_flow
+		[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+		 RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS +
+		 RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_hwpdn_flow
+		[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+		 RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+		 RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_enter_lps_flow
+		[RTL8188EE_TRANS_ACT_TO_LPS_STEPS +
+		 RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_leave_lps_flow
+		[RTL8188EE_TRANS_LPS_TO_ACT_STEPS +
+		 RTL8188EE_TRANS_END_STEPS];
 
 /* RTL8723 Power Configuration CMDs for PCIe interface */
-#define Rtl8188E_NIC_PWR_ON_FLOW	rtl8188e_power_on_flow
-#define Rtl8188E_NIC_RF_OFF_FLOW	rtl8188e_radio_off_flow
-#define Rtl8188E_NIC_DISABLE_FLOW	rtl8188e_card_disable_flow
-#define Rtl8188E_NIC_ENABLE_FLOW	rtl8188e_card_enable_flow
-#define Rtl8188E_NIC_SUSPEND_FLOW	rtl8188e_suspend_flow
-#define Rtl8188E_NIC_RESUME_FLOW	rtl8188e_resume_flow
-#define Rtl8188E_NIC_PDN_FLOW		rtl8188e_hwpdn_flow
-#define Rtl8188E_NIC_LPS_ENTER_FLOW	rtl8188e_enter_lps_flow
-#define Rtl8188E_NIC_LPS_LEAVE_FLOW	rtl8188e_leave_lps_flow
+#define RTL8188EE_NIC_PWR_ON_FLOW	rtl8188ee_power_on_flow
+#define RTL8188EE_NIC_RF_OFF_FLOW	rtl8188ee_radio_off_flow
+#define RTL8188EE_NIC_DISABLE_FLOW	rtl8188ee_card_disable_flow
+#define RTL8188EE_NIC_ENABLE_FLOW	rtl8188ee_card_enable_flow
+#define RTL8188EE_NIC_SUSPEND_FLOW	rtl8188ee_suspend_flow
+#define RTL8188EE_NIC_RESUME_FLOW	rtl8188ee_resume_flow
+#define RTL8188EE_NIC_PDN_FLOW		rtl8188ee_hwpdn_flow
+#define RTL8188EE_NIC_LPS_ENTER_FLOW	rtl8188ee_enter_lps_flow
+#define RTL8188EE_NIC_LPS_LEAVE_FLOW	rtl8188ee_leave_lps_flow
 
 #endif