Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

1 files changed, 327 insertions, 0 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
new file mode 100644
index 000000000000..028ec6dd52b4
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
@@ -0,0 +1,327 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2013  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723E_PWRSEQ_H__
+#define __RTL8723E_PWRSEQ_H__
+
+#include "pwrseqcmd.h"
+/*
+	Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
+	There are 6 HW Power States:
+	0: POFF--Power Off
+	1: PDN--Power Down
+	2: CARDEMU--Card Emulation
+	3: ACT--Active Mode
+	4: LPS--Low Power State
+	5: SUS--Suspend
+
+	The transision from different states are defined below
+	TRANS_CARDEMU_TO_ACT
+	TRANS_ACT_TO_CARDEMU
+	TRANS_CARDEMU_TO_SUS
+	TRANS_SUS_TO_CARDEMU
+	TRANS_CARDEMU_TO_PDN
+	TRANS_ACT_TO_LPS
+	TRANS_LPS_TO_ACT
+
+	TRANS_END
+	PWR SEQ Version: rtl8188e_PwrSeq_V09.h
+*/
+
+#define	RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS	10
+#define	RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS	10
+#define	RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS	10
+#define	RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS	10
+#define	RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS	10
+#define	RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS	10
+#define	RTL8188E_TRANS_ACT_TO_LPS_STEPS		15
+#define	RTL8188E_TRANS_LPS_TO_ACT_STEPS		15
+#define	RTL8188E_TRANS_END_STEPS		1
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_ACT					\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/* wait till 0x04[17] = 1    power ready*/			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/* 0x02[1:0] = 0	reset BB*/				\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0},		\
+	{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*0x24[23] = 2b'01 schmit trigger */				\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/* 0x04[15] = 0 disable HWPDN (control by DRV)*/		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*0x04[12:11] = 2b'00 disable WL suspend*/			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*0x04[8] = 1 polling until return 0*/				\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*wait till 0x04[8] = 0*/					\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0},			\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*LDO normal mode*/\
+	{0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*SDIO Driving*/\
+
+#define RTL8188E_TRANS_ACT_TO_CARDEMU					\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*LDO Sleep mode*/\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*0x04[9] = 1 turn off MAC by HW state machine*/		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*wait till 0x04[9] = 0 polling until return 0 to disable*/	\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0},			\
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_SUS					\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
+	/*0x04[12:11] = 2b'01enable WL suspend*/			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)},	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	/*0x04[12:11] = 2b'11enable WL suspend for PCIe*/		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4)},\
+	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
+	/*  0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7)},			\
+	{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
+	/*Clear SIC_EN register 0x40[12] = 1'b0 */			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
+	/*Set USB suspend enable local register  0xfe10[4]= 1 */	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	/*Set SDIO suspend local register*/				\
+	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	/*wait power state to suspend*/					\
+	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8188E_TRANS_SUS_TO_CARDEMU					\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	/*Set SDIO suspend local register*/				\
+	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0},			\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	/*wait power state to suspend*/					\
+	PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*0x04[12:11] = 2b'01enable WL suspend*/			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0},
+
+#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS				\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+	{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*0x24[23] = 2b'01 schmit trigger */				\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
+	/*0x04[12:11] = 2b'01 enable WL suspend*/			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)},	\
+	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
+	/*  0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},			\
+	{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,				\
+	/*Clear SIC_EN register 0x40[12] = 1'b0 */			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
+	/*Set USB suspend enable local register  0xfe10[4]= 1 */	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)},		\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	/*Set SDIO suspend local register*/				\
+	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU				\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	PWR_BASEADDR_SDIO,\
+	PWR_CMD_WRITE, BIT(0), 0}, /*Set SDIO suspend local register*/	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	PWR_BASEADDR_SDIO,\
+	PWR_CMD_POLLING, BIT(1), BIT(1)}, /*wait power state to suspend*/\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC,						\
+	PWR_CMD_WRITE, BIT(3)|BIT(4), 0},				\
+	/*0x04[12:11] = 2b'01enable WL suspend*/
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_PDN					\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/
+
+
+#define RTL8188E_TRANS_PDN_TO_CARDEMU					\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/
+
+
+#define RTL8188E_TRANS_ACT_TO_LPS					\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/	\
+	{0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*zero if no pkt is tx*/\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	{0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*Should be zero if no packet is transmitting*/	\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	{0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*Should be zero if no packet is transmitting*/			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	{0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*Should be zero if no packet is transmitting*/			\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},			\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*CCK and OFDM are disabled, and clock are gated*/		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},			\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/	\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*check if removed later*/					\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},			\
+	{0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*Respond TxOK to scheduler*/					\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)},		\
+
+
+#define RTL8188E_TRANS_LPS_TO_ACT					\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+	{0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/	\
+	{0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/	\
+	{0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/	\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/	\
+	{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*.	0x08[4] = 0		 switch TSF to 40M*/		\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0},			\
+	{0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*Polling 0x109[7]= 0  TSF in 40M*/				\
+	PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0},			\
+	{0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*. 0x29[7:6] = 2b'00	 enable BB clock*/			\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0},		\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*.	0x101[1] = 1*/\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*.	0x100[7:0] = 0xFF	 enable WMAC TRX*/\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	/*. 0x02[1:0] = 2b'11  enable BB macro*/\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)},	\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+	PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*.	0x522 = 0*/
+
+
+#define RTL8188E_TRANS_END						\
+	/* format */							\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+	0, PWR_CMD_END, 0, 0}
+
+extern struct wlan_pwr_cfg rtl8188e_power_on_flow
+		[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS +
+		RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_radio_off_flow
+		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+		RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_card_disable_flow
+		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+		RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+		RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_card_enable_flow
+		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+		RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+		RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_suspend_flow
+		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+		RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+		RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_resume_flow
+		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+		RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+		RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_hwpdn_flow
+		[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+		RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+		RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_enter_lps_flow
+		[RTL8188E_TRANS_ACT_TO_LPS_STEPS +
+		RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_leave_lps_flow
+		[RTL8188E_TRANS_LPS_TO_ACT_STEPS +
+		RTL8188E_TRANS_END_STEPS];
+
+/* RTL8723 Power Configuration CMDs for PCIe interface */
+#define Rtl8188E_NIC_PWR_ON_FLOW	rtl8188e_power_on_flow
+#define Rtl8188E_NIC_RF_OFF_FLOW	rtl8188e_radio_off_flow
+#define Rtl8188E_NIC_DISABLE_FLOW	rtl8188e_card_disable_flow
+#define Rtl8188E_NIC_ENABLE_FLOW	rtl8188e_card_enable_flow
+#define Rtl8188E_NIC_SUSPEND_FLOW	rtl8188e_suspend_flow
+#define Rtl8188E_NIC_RESUME_FLOW	rtl8188e_resume_flow
+#define Rtl8188E_NIC_PDN_FLOW		rtl8188e_hwpdn_flow
+#define Rtl8188E_NIC_LPS_ENTER_FLOW	rtl8188e_enter_lps_flow
+#define Rtl8188E_NIC_LPS_LEAVE_FLOW	rtl8188e_leave_lps_flow
+
+#endif