Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1436 commits)
  cassini: Use local-mac-address prom property for Cassini MAC address
  net: remove the duplicate #ifdef __KERNEL__
  net: bridge: check the length of skb after nf_bridge_maybe_copy_header()
  netconsole: clarify stopping message
  netconsole: don't announce stopping if nothing happened
  cnic: Fix the type field in SPQ messages
  netfilter: fix export secctx error handling
  netfilter: fix the race when initializing nf_ct_expect_hash_rnd
  ipv4: IP defragmentation must be ECN aware
  net: r6040: Return proper error for r6040_init_one
  dcb: use after free in dcb_flushapp()
  dcb: unlock on error in dcbnl_ieee_get()
  net: ixp4xx_eth: Return proper error for eth_init_one
  include/linux/if_ether.h: Add #define ETH_P_LINK_CTL for HPNA and wlan local tunnel
  net: add POLLPRI to sock_def_readable()
  af_unix: Avoid socket->sk NULL OOPS in stream connect security hooks.
  net_sched: pfifo_head_drop problem
  mac80211: remove stray extern
  mac80211: implement off-channel TX using hw r-o-c offload
  mac80211: implement hardware offload for remain-on-channel
  ...

1 files changed, 245 insertions, 0 deletions

diff --git a/drivers/net/wireless/rtl818x/rtl8187/leds.c b/drivers/net/wireless/rtl818x/rtl8187/leds.c
new file mode 100644
index 000000000000..2e0de2f5f0f9
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187/leds.c
@@ -0,0 +1,245 @@
+/*
+ * Linux LED driver for RTL8187
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Based on the LED handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifdef CONFIG_RTL8187_LEDS
+
+#include <net/mac80211.h>
+#include <linux/usb.h>
+#include <linux/eeprom_93cx6.h>
+
+#include "rtl8187.h"
+#include "leds.h"
+
+static void led_turn_on(struct work_struct *work)
+{
+	/* As this routine does read/write operations on the hardware, it must
+	 * be run from a work queue.
+	 */
+	u8 reg;
+	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+				    led_on.work);
+	struct rtl8187_led *led = &priv->led_tx;
+
+	/* Don't change the LED, when the device is down. */
+	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	/* Skip if the LED is not registered. */
+	if (!led->dev)
+		return;
+	mutex_lock(&priv->conf_mutex);
+	switch (led->ledpin) {
+	case LED_PIN_GPIO0:
+		rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
+		break;
+	case LED_PIN_LED0:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_LED1:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_HW:
+	default:
+		break;
+	}
+	mutex_unlock(&priv->conf_mutex);
+}
+
+static void led_turn_off(struct work_struct *work)
+{
+	/* As this routine does read/write operations on the hardware, it must
+	 * be run from a work queue.
+	 */
+	u8 reg;
+	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+				    led_off.work);
+	struct rtl8187_led *led = &priv->led_tx;
+
+	/* Don't change the LED, when the device is down. */
+	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	/* Skip if the LED is not registered. */
+	if (!led->dev)
+		return;
+	mutex_lock(&priv->conf_mutex);
+	switch (led->ledpin) {
+	case LED_PIN_GPIO0:
+		rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
+		break;
+	case LED_PIN_LED0:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_LED1:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_HW:
+	default:
+		break;
+	}
+	mutex_unlock(&priv->conf_mutex);
+}
+
+/* Callback from the LED subsystem. */
+static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
+				   enum led_brightness brightness)
+{
+	struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led,
+					       led_dev);
+	struct ieee80211_hw *hw = led->dev;
+	struct rtl8187_priv *priv;
+	static bool radio_on;
+
+	if (!hw)
+		return;
+	priv = hw->priv;
+	if (led->is_radio) {
+		if (brightness == LED_FULL) {
+			ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
+			radio_on = true;
+		} else if (radio_on) {
+			radio_on = false;
+			cancel_delayed_work_sync(&priv->led_on);
+			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
+		}
+	} else if (radio_on) {
+		if (brightness == LED_OFF) {
+			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
+			/* The LED is off for 1/20 sec - it just blinks. */
+			ieee80211_queue_delayed_work(hw, &priv->led_on,
+						     HZ / 20);
+		} else
+			ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
+	}
+}
+
+static int rtl8187_register_led(struct ieee80211_hw *dev,
+				struct rtl8187_led *led, const char *name,
+				const char *default_trigger, u8 ledpin,
+				bool is_radio)
+{
+	int err;
+	struct rtl8187_priv *priv = dev->priv;
+
+	if (led->dev)
+		return -EEXIST;
+	if (!default_trigger)
+		return -EINVAL;
+	led->dev = dev;
+	led->ledpin = ledpin;
+	led->is_radio = is_radio;
+	strncpy(led->name, name, sizeof(led->name));
+
+	led->led_dev.name = led->name;
+	led->led_dev.default_trigger = default_trigger;
+	led->led_dev.brightness_set = rtl8187_led_brightness_set;
+
+	err = led_classdev_register(&priv->udev->dev, &led->led_dev);
+	if (err) {
+		printk(KERN_INFO "LEDs: Failed to register %s\n", name);
+		led->dev = NULL;
+		return err;
+	}
+	return 0;
+}
+
+static void rtl8187_unregister_led(struct rtl8187_led *led)
+{
+	struct ieee80211_hw *hw = led->dev;
+	struct rtl8187_priv *priv = hw->priv;
+
+	led_classdev_unregister(&led->led_dev);
+	flush_delayed_work(&priv->led_off);
+	led->dev = NULL;
+}
+
+void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	char name[RTL8187_LED_MAX_NAME_LEN + 1];
+	u8 ledpin;
+	int err;
+
+	/* According to the vendor driver, the LED operation depends on the
+	 * customer ID encoded in the EEPROM
+	 */
+	printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
+	switch (custid) {
+	case EEPROM_CID_RSVD0:
+	case EEPROM_CID_RSVD1:
+	case EEPROM_CID_SERCOMM_PS:
+	case EEPROM_CID_QMI:
+	case EEPROM_CID_DELL:
+	case EEPROM_CID_TOSHIBA:
+		ledpin = LED_PIN_GPIO0;
+		break;
+	case EEPROM_CID_ALPHA0:
+		ledpin = LED_PIN_LED0;
+		break;
+	case EEPROM_CID_HW:
+		ledpin = LED_PIN_HW;
+		break;
+	default:
+		ledpin = LED_PIN_GPIO0;
+	}
+
+	INIT_DELAYED_WORK(&priv->led_on, led_turn_on);
+	INIT_DELAYED_WORK(&priv->led_off, led_turn_off);
+
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::radio", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_radio, name,
+			 ieee80211_get_radio_led_name(dev), ledpin, true);
+	if (err)
+		return;
+
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::tx", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_tx, name,
+			 ieee80211_get_tx_led_name(dev), ledpin, false);
+	if (err)
+		goto err_tx;
+
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::rx", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_rx, name,
+			 ieee80211_get_rx_led_name(dev), ledpin, false);
+	if (!err)
+		return;
+
+	/* registration of RX LED failed - unregister */
+	rtl8187_unregister_led(&priv->led_tx);
+err_tx:
+	rtl8187_unregister_led(&priv->led_radio);
+}
+
+void rtl8187_leds_exit(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	rtl8187_unregister_led(&priv->led_radio);
+	rtl8187_unregister_led(&priv->led_rx);
+	rtl8187_unregister_led(&priv->led_tx);
+	cancel_delayed_work_sync(&priv->led_off);
+	cancel_delayed_work_sync(&priv->led_on);
+}
+#endif /* def CONFIG_RTL8187_LEDS */
+