Move all rtl818x files to a common directory.

This change improves the maintainability of these drivers. No functionality
is changed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 1081 deletions

diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c
deleted file mode 100644
index 6c226c024dd9..000000000000
--- a/drivers/net/wireless/rtl8180_dev.c
+++ /dev/null
@@ -1,1081 +0,0 @@
-
-/*
- * Linux device driver for RTL8180 / RTL8185
- *
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
- *
- * Based on the r8180 driver, which is:
- * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
- *
- * Thanks to Realtek for their support!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/eeprom_93cx6.h>
-#include <net/mac80211.h>
-
-#include "rtl8180.h"
-#include "rtl8180_rtl8225.h"
-#include "rtl8180_sa2400.h"
-#include "rtl8180_max2820.h"
-#include "rtl8180_grf5101.h"
-
-MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
-MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
-MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver");
-MODULE_LICENSE("GPL");
-
-static struct pci_device_id rtl8180_table[] __devinitdata = {
-	/* rtl8185 */
-	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
-
-	/* rtl8180 */
-	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
-	{ PCI_DEVICE(0x1799, 0x6001) },
-	{ PCI_DEVICE(0x1799, 0x6020) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, rtl8180_table);
-
-static const struct ieee80211_rate rtl818x_rates[] = {
-	{ .bitrate = 10, .hw_value = 0, },
-	{ .bitrate = 20, .hw_value = 1, },
-	{ .bitrate = 55, .hw_value = 2, },
-	{ .bitrate = 110, .hw_value = 3, },
-	{ .bitrate = 60, .hw_value = 4, },
-	{ .bitrate = 90, .hw_value = 5, },
-	{ .bitrate = 120, .hw_value = 6, },
-	{ .bitrate = 180, .hw_value = 7, },
-	{ .bitrate = 240, .hw_value = 8, },
-	{ .bitrate = 360, .hw_value = 9, },
-	{ .bitrate = 480, .hw_value = 10, },
-	{ .bitrate = 540, .hw_value = 11, },
-};
-
-static const struct ieee80211_channel rtl818x_channels[] = {
-	{ .center_freq = 2412 },
-	{ .center_freq = 2417 },
-	{ .center_freq = 2422 },
-	{ .center_freq = 2427 },
-	{ .center_freq = 2432 },
-	{ .center_freq = 2437 },
-	{ .center_freq = 2442 },
-	{ .center_freq = 2447 },
-	{ .center_freq = 2452 },
-	{ .center_freq = 2457 },
-	{ .center_freq = 2462 },
-	{ .center_freq = 2467 },
-	{ .center_freq = 2472 },
-	{ .center_freq = 2484 },
-};
-
-
-
-
-void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i = 10;
-	u32 buf;
-
-	buf = (data << 8) | addr;
-
-	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
-	while (i--) {
-		rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
-		if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
-			return;
-	}
-}
-
-static void rtl8180_handle_rx(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	unsigned int count = 32;
-
-	while (count--) {
-		struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
-		struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
-		u32 flags = le32_to_cpu(entry->flags);
-
-		if (flags & RTL818X_RX_DESC_FLAG_OWN)
-			return;
-
-		if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL |
-				      RTL818X_RX_DESC_FLAG_FOF |
-				      RTL818X_RX_DESC_FLAG_RX_ERR)))
-			goto done;
-		else {
-			u32 flags2 = le32_to_cpu(entry->flags2);
-			struct ieee80211_rx_status rx_status = {0};
-			struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
-
-			if (unlikely(!new_skb))
-				goto done;
-
-			pci_unmap_single(priv->pdev,
-					 *((dma_addr_t *)skb->cb),
-					 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
-			skb_put(skb, flags & 0xFFF);
-
-			rx_status.antenna = (flags2 >> 15) & 1;
-			/* TODO: improve signal/rssi reporting */
-			rx_status.qual = flags2 & 0xFF;
-			rx_status.signal = (flags2 >> 8) & 0x7F;
-			/* XXX: is this correct? */
-			rx_status.rate_idx = (flags >> 20) & 0xF;
-			rx_status.freq = dev->conf.channel->center_freq;
-			rx_status.band = dev->conf.channel->band;
-			rx_status.mactime = le64_to_cpu(entry->tsft);
-			rx_status.flag |= RX_FLAG_TSFT;
-			if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
-				rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
-
-			ieee80211_rx_irqsafe(dev, skb, &rx_status);
-
-			skb = new_skb;
-			priv->rx_buf[priv->rx_idx] = skb;
-			*((dma_addr_t *) skb->cb) =
-				pci_map_single(priv->pdev, skb_tail_pointer(skb),
-					       MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
-		}
-
-	done:
-		entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
-		entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
-					   MAX_RX_SIZE);
-		if (priv->rx_idx == 31)
-			entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
-		priv->rx_idx = (priv->rx_idx + 1) % 32;
-	}
-}
-
-static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
-
-	while (skb_queue_len(&ring->queue)) {
-		struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
-		struct sk_buff *skb;
-		struct ieee80211_tx_info *info;
-		u32 flags = le32_to_cpu(entry->flags);
-
-		if (flags & RTL818X_TX_DESC_FLAG_OWN)
-			return;
-
-		ring->idx = (ring->idx + 1) % ring->entries;
-		skb = __skb_dequeue(&ring->queue);
-		pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
-				 skb->len, PCI_DMA_TODEVICE);
-
-		info = IEEE80211_SKB_CB(skb);
-		ieee80211_tx_info_clear_status(info);
-
-		if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
-		    (flags & RTL818X_TX_DESC_FLAG_TX_OK))
-			info->flags |= IEEE80211_TX_STAT_ACK;
-
-		info->status.rates[0].count = (flags & 0xFF) + 1;
-
-		ieee80211_tx_status_irqsafe(dev, skb);
-		if (ring->entries - skb_queue_len(&ring->queue) == 2)
-			ieee80211_wake_queue(dev, prio);
-	}
-}
-
-static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
-{
-	struct ieee80211_hw *dev = dev_id;
-	struct rtl8180_priv *priv = dev->priv;
-	u16 reg;
-
-	spin_lock(&priv->lock);
-	reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
-	if (unlikely(reg == 0xFFFF)) {
-		spin_unlock(&priv->lock);
-		return IRQ_HANDLED;
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
-
-	if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
-		rtl8180_handle_tx(dev, 3);
-
-	if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
-		rtl8180_handle_tx(dev, 2);
-
-	if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
-		rtl8180_handle_tx(dev, 1);
-
-	if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
-		rtl8180_handle_tx(dev, 0);
-
-	if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
-		rtl8180_handle_rx(dev);
-
-	spin_unlock(&priv->lock);
-
-	return IRQ_HANDLED;
-}
-
-static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_tx_ring *ring;
-	struct rtl8180_tx_desc *entry;
-	unsigned long flags;
-	unsigned int idx, prio;
-	dma_addr_t mapping;
-	u32 tx_flags;
-	u8 rc_flags;
-	u16 plcp_len = 0;
-	__le16 rts_duration = 0;
-
-	prio = skb_get_queue_mapping(skb);
-	ring = &priv->tx_ring[prio];
-
-	mapping = pci_map_single(priv->pdev, skb->data,
-				 skb->len, PCI_DMA_TODEVICE);
-
-	tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
-		   RTL818X_TX_DESC_FLAG_LS |
-		   (ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
-		   skb->len;
-
-	if (priv->r8185)
-		tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
-			    RTL818X_TX_DESC_FLAG_NO_ENC;
-
-	rc_flags = info->control.rates[0].flags;
-	if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
-		tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
-	} else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		tx_flags |= RTL818X_TX_DESC_FLAG_CTS;
-		tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
-	}
-
-	if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
-		rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
-						      info);
-
-	if (!priv->r8185) {
-		unsigned int remainder;
-
-		plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
-				(ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
-		remainder = (16 * (skb->len + 4)) %
-			    ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
-		if (remainder > 0 && remainder <= 6)
-			plcp_len |= 1 << 15;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-	idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
-	entry = &ring->desc[idx];
-
-	entry->rts_duration = rts_duration;
-	entry->plcp_len = cpu_to_le16(plcp_len);
-	entry->tx_buf = cpu_to_le32(mapping);
-	entry->frame_len = cpu_to_le32(skb->len);
-	entry->flags2 = info->control.rates[1].idx >= 0 ?
-		ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0;
-	entry->retry_limit = info->control.rates[0].count;
-	entry->flags = cpu_to_le32(tx_flags);
-	__skb_queue_tail(&ring->queue, skb);
-	if (ring->entries - skb_queue_len(&ring->queue) < 2)
-		ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
-
-	return 0;
-}
-
-void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
-{
-	u8 reg;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-}
-
-static int rtl8180_init_hw(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u16 reg;
-
-	rtl818x_iowrite8(priv, &priv->map->CMD, 0);
-	rtl818x_ioread8(priv, &priv->map->CMD);
-	msleep(10);
-
-	/* reset */
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
-	rtl818x_ioread8(priv, &priv->map->CMD);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg &= (1 << 1);
-	reg |= RTL818X_CMD_RESET;
-	rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
-	rtl818x_ioread8(priv, &priv->map->CMD);
-	msleep(200);
-
-	/* check success of reset */
-	if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
-		printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy));
-		return -ETIMEDOUT;
-	}
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
-	rtl818x_ioread8(priv, &priv->map->CMD);
-	msleep(200);
-
-	if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
-		/* For cardbus */
-		reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-		reg |= 1 << 1;
-		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-		reg = rtl818x_ioread16(priv, &priv->map->FEMR);
-		reg |= (1 << 15) | (1 << 14) | (1 << 4);
-		rtl818x_iowrite16(priv, &priv->map->FEMR, reg);
-	}
-
-	rtl818x_iowrite8(priv, &priv->map->MSR, 0);
-
-	if (!priv->r8185)
-		rtl8180_set_anaparam(priv, priv->anaparam);
-
-	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
-	rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
-	rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
-	rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
-	rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
-
-	/* TODO: necessary? specs indicate not */
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
-	if (priv->r8185) {
-		reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
-		rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
-	}
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	/* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
-
-	/* TODO: turn off hw wep on rtl8180 */
-
-	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
-
-	if (priv->r8185) {
-		rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
-		rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
-		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
-
-		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
-
-		/* TODO: set ClkRun enable? necessary? */
-		reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
-		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
-		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-		reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
-		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-	} else {
-		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1);
-		rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
-
-		rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
-		rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
-	}
-
-	priv->rf->init(dev);
-	if (priv->r8185)
-		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
-	return 0;
-}
-
-static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_rx_desc *entry;
-	int i;
-
-	priv->rx_ring = pci_alloc_consistent(priv->pdev,
-					     sizeof(*priv->rx_ring) * 32,
-					     &priv->rx_ring_dma);
-
-	if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
-		printk(KERN_ERR "%s: Cannot allocate RX ring\n",
-		       wiphy_name(dev->wiphy));
-		return -ENOMEM;
-	}
-
-	memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32);
-	priv->rx_idx = 0;
-
-	for (i = 0; i < 32; i++) {
-		struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
-		dma_addr_t *mapping;
-		entry = &priv->rx_ring[i];
-		if (!skb)
-			return 0;
-
-		priv->rx_buf[i] = skb;
-		mapping = (dma_addr_t *)skb->cb;
-		*mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
-					  MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
-		entry->rx_buf = cpu_to_le32(*mapping);
-		entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
-					   MAX_RX_SIZE);
-	}
-	entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
-	return 0;
-}
-
-static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i;
-
-	for (i = 0; i < 32; i++) {
-		struct sk_buff *skb = priv->rx_buf[i];
-		if (!skb)
-			continue;
-
-		pci_unmap_single(priv->pdev,
-				 *((dma_addr_t *)skb->cb),
-				 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
-		kfree_skb(skb);
-	}
-
-	pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32,
-			    priv->rx_ring, priv->rx_ring_dma);
-	priv->rx_ring = NULL;
-}
-
-static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
-				unsigned int prio, unsigned int entries)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_tx_desc *ring;
-	dma_addr_t dma;
-	int i;
-
-	ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma);
-	if (!ring || (unsigned long)ring & 0xFF) {
-		printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n",
-		       wiphy_name(dev->wiphy), prio);
-		return -ENOMEM;
-	}
-
-	memset(ring, 0, sizeof(*ring)*entries);
-	priv->tx_ring[prio].desc = ring;
-	priv->tx_ring[prio].dma = dma;
-	priv->tx_ring[prio].idx = 0;
-	priv->tx_ring[prio].entries = entries;
-	skb_queue_head_init(&priv->tx_ring[prio].queue);
-
-	for (i = 0; i < entries; i++)
-		ring[i].next_tx_desc =
-			cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
-
-	return 0;
-}
-
-static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
-
-	while (skb_queue_len(&ring->queue)) {
-		struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
-		struct sk_buff *skb = __skb_dequeue(&ring->queue);
-
-		pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
-				 skb->len, PCI_DMA_TODEVICE);
-		kfree_skb(skb);
-		ring->idx = (ring->idx + 1) % ring->entries;
-	}
-
-	pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
-			    ring->desc, ring->dma);
-	ring->desc = NULL;
-}
-
-static int rtl8180_start(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int ret, i;
-	u32 reg;
-
-	ret = rtl8180_init_rx_ring(dev);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < 4; i++)
-		if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
-			goto err_free_rings;
-
-	ret = rtl8180_init_hw(dev);
-	if (ret)
-		goto err_free_rings;
-
-	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
-	rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
-	rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
-	rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
-	rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
-
-	ret = request_irq(priv->pdev->irq, &rtl8180_interrupt,
-			  IRQF_SHARED, KBUILD_MODNAME, dev);
-	if (ret) {
-		printk(KERN_ERR "%s: failed to register IRQ handler\n",
-		       wiphy_name(dev->wiphy));
-		goto err_free_rings;
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
-
-	rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
-	rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
-
-	reg = RTL818X_RX_CONF_ONLYERLPKT |
-	      RTL818X_RX_CONF_RX_AUTORESETPHY |
-	      RTL818X_RX_CONF_MGMT |
-	      RTL818X_RX_CONF_DATA |
-	      (7 << 8 /* MAX RX DMA */) |
-	      RTL818X_RX_CONF_BROADCAST |
-	      RTL818X_RX_CONF_NICMAC;
-
-	if (priv->r8185)
-		reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
-	else {
-		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
-			? RTL818X_RX_CONF_CSDM1 : 0;
-		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
-			? RTL818X_RX_CONF_CSDM2 : 0;
-	}
-
-	priv->rx_conf = reg;
-	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
-
-	if (priv->r8185) {
-		reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
-		reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
-		reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
-		rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
-
-		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
-		reg |=  RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
-		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
-
-		/* disable early TX */
-		rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
-	}
-
-	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-	reg |= (6 << 21 /* MAX TX DMA */) |
-	       RTL818X_TX_CONF_NO_ICV;
-
-	if (priv->r8185)
-		reg &= ~RTL818X_TX_CONF_PROBE_DTS;
-	else
-		reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
-
-	/* different meaning, same value on both rtl8185 and rtl8180 */
-	reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
-
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg |= RTL818X_CMD_RX_ENABLE;
-	reg |= RTL818X_CMD_TX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-
-	priv->mode = NL80211_IFTYPE_MONITOR;
-	return 0;
-
- err_free_rings:
-	rtl8180_free_rx_ring(dev);
-	for (i = 0; i < 4; i++)
-		if (priv->tx_ring[i].desc)
-			rtl8180_free_tx_ring(dev, i);
-
-	return ret;
-}
-
-static void rtl8180_stop(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 reg;
-	int i;
-
-	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
-
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg &= ~RTL818X_CMD_TX_ENABLE;
-	reg &= ~RTL818X_CMD_RX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-
-	priv->rf->stop(dev);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	free_irq(priv->pdev->irq, dev);
-
-	rtl8180_free_rx_ring(dev);
-	for (i = 0; i < 4; i++)
-		rtl8180_free_tx_ring(dev, i);
-}
-
-static int rtl8180_add_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_if_init_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	if (priv->mode != NL80211_IFTYPE_MONITOR)
-		return -EOPNOTSUPP;
-
-	switch (conf->type) {
-	case NL80211_IFTYPE_STATION:
-		priv->mode = conf->type;
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	priv->vif = conf->vif;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
-			  le32_to_cpu(*(__le32 *)conf->mac_addr));
-	rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
-			  le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	return 0;
-}
-
-static void rtl8180_remove_interface(struct ieee80211_hw *dev,
-				     struct ieee80211_if_init_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	priv->mode = NL80211_IFTYPE_MONITOR;
-	priv->vif = NULL;
-}
-
-static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct ieee80211_conf *conf = &dev->conf;
-
-	priv->rf->set_chan(dev, conf);
-
-	return 0;
-}
-
-static int rtl8180_config_interface(struct ieee80211_hw *dev,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i;
-
-	for (i = 0; i < ETH_ALEN; i++)
-		rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
-
-	if (is_valid_ether_addr(conf->bssid))
-		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
-	else
-		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
-
-	return 0;
-}
-
-static void rtl8180_configure_filter(struct ieee80211_hw *dev,
-				     unsigned int changed_flags,
-				     unsigned int *total_flags,
-				     int mc_count, struct dev_addr_list *mclist)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	if (changed_flags & FIF_FCSFAIL)
-		priv->rx_conf ^= RTL818X_RX_CONF_FCS;
-	if (changed_flags & FIF_CONTROL)
-		priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
-	if (changed_flags & FIF_OTHER_BSS)
-		priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
-	if (*total_flags & FIF_ALLMULTI || mc_count > 0)
-		priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
-	else
-		priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
-
-	*total_flags = 0;
-
-	if (priv->rx_conf & RTL818X_RX_CONF_FCS)
-		*total_flags |= FIF_FCSFAIL;
-	if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
-		*total_flags |= FIF_CONTROL;
-	if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
-		*total_flags |= FIF_OTHER_BSS;
-	if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
-		*total_flags |= FIF_ALLMULTI;
-
-	rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
-}
-
-static const struct ieee80211_ops rtl8180_ops = {
-	.tx			= rtl8180_tx,
-	.start			= rtl8180_start,
-	.stop			= rtl8180_stop,
-	.add_interface		= rtl8180_add_interface,
-	.remove_interface	= rtl8180_remove_interface,
-	.config			= rtl8180_config,
-	.config_interface	= rtl8180_config_interface,
-	.configure_filter	= rtl8180_configure_filter,
-};
-
-static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
-{
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8180_priv *priv = dev->priv;
-	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-
-	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
-	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
-	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
-	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
-}
-
-static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
-{
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8180_priv *priv = dev->priv;
-	u8 reg = 2 << 6;
-
-	if (eeprom->reg_data_in)
-		reg |= RTL818X_EEPROM_CMD_WRITE;
-	if (eeprom->reg_data_out)
-		reg |= RTL818X_EEPROM_CMD_READ;
-	if (eeprom->reg_data_clock)
-		reg |= RTL818X_EEPROM_CMD_CK;
-	if (eeprom->reg_chip_select)
-		reg |= RTL818X_EEPROM_CMD_CS;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(10);
-}
-
-static int __devinit rtl8180_probe(struct pci_dev *pdev,
-				   const struct pci_device_id *id)
-{
-	struct ieee80211_hw *dev;
-	struct rtl8180_priv *priv;
-	unsigned long mem_addr, mem_len;
-	unsigned int io_addr, io_len;
-	int err, i;
-	struct eeprom_93cx6 eeprom;
-	const char *chip_name, *rf_name = NULL;
-	u32 reg;
-	u16 eeprom_val;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
-		       pci_name(pdev));
-		return err;
-	}
-
-	err = pci_request_regions(pdev, KBUILD_MODNAME);
-	if (err) {
-		printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
-		       pci_name(pdev));
-		return err;
-	}
-
-	io_addr = pci_resource_start(pdev, 0);
-	io_len = pci_resource_len(pdev, 0);
-	mem_addr = pci_resource_start(pdev, 1);
-	mem_len = pci_resource_len(pdev, 1);
-
-	if (mem_len < sizeof(struct rtl818x_csr) ||
-	    io_len < sizeof(struct rtl818x_csr)) {
-		printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
-		       pci_name(pdev));
-		err = -ENOMEM;
-		goto err_free_reg;
-	}
-
-	if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) ||
-	    (err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) {
-		printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
-		       pci_name(pdev));
-		goto err_free_reg;
-	}
-
-	pci_set_master(pdev);
-
-	dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
-	if (!dev) {
-		printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
-		       pci_name(pdev));
-		err = -ENOMEM;
-		goto err_free_reg;
-	}
-
-	priv = dev->priv;
-	priv->pdev = pdev;
-
-	dev->max_rates = 2;
-	SET_IEEE80211_DEV(dev, &pdev->dev);
-	pci_set_drvdata(pdev, dev);
-
-	priv->map = pci_iomap(pdev, 1, mem_len);
-	if (!priv->map)
-		priv->map = pci_iomap(pdev, 0, io_len);
-
-	if (!priv->map) {
-		printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n",
-		       pci_name(pdev));
-		goto err_free_dev;
-	}
-
-	BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
-	BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
-
-	memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
-	memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
-
-	priv->band.band = IEEE80211_BAND_2GHZ;
-	priv->band.channels = priv->channels;
-	priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
-	priv->band.bitrates = priv->rates;
-	priv->band.n_bitrates = 4;
-	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
-
-	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		     IEEE80211_HW_RX_INCLUDES_FCS |
-		     IEEE80211_HW_SIGNAL_UNSPEC;
-	dev->queues = 1;
-	dev->max_signal = 65;
-
-	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-	reg &= RTL818X_TX_CONF_HWVER_MASK;
-	switch (reg) {
-	case RTL818X_TX_CONF_R8180_ABCD:
-		chip_name = "RTL8180";
-		break;
-	case RTL818X_TX_CONF_R8180_F:
-		chip_name = "RTL8180vF";
-		break;
-	case RTL818X_TX_CONF_R8185_ABC:
-		chip_name = "RTL8185";
-		break;
-	case RTL818X_TX_CONF_R8185_D:
-		chip_name = "RTL8185vD";
-		break;
-	default:
-		printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
-		       pci_name(pdev), reg >> 25);
-		goto err_iounmap;
-	}
-
-	priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC;
-	if (priv->r8185) {
-		priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
-		pci_try_set_mwi(pdev);
-	}
-
-	eeprom.data = dev;
-	eeprom.register_read = rtl8180_eeprom_register_read;
-	eeprom.register_write = rtl8180_eeprom_register_write;
-	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
-		eeprom.width = PCI_EEPROM_WIDTH_93C66;
-	else
-		eeprom.width = PCI_EEPROM_WIDTH_93C46;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(10);
-
-	eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
-	eeprom_val &= 0xFF;
-	switch (eeprom_val) {
-	case 1:	rf_name = "Intersil";
-		break;
-	case 2:	rf_name = "RFMD";
-		break;
-	case 3:	priv->rf = &sa2400_rf_ops;
-		break;
-	case 4:	priv->rf = &max2820_rf_ops;
-		break;
-	case 5:	priv->rf = &grf5101_rf_ops;
-		break;
-	case 9:	priv->rf = rtl8180_detect_rf(dev);
-		break;
-	case 10:
-		rf_name = "RTL8255";
-		break;
-	default:
-		printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
-		       pci_name(pdev), eeprom_val);
-		goto err_iounmap;
-	}
-
-	if (!priv->rf) {
-		printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
-		       pci_name(pdev), rf_name);
-		goto err_iounmap;
-	}
-
-	eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
-	priv->csthreshold = eeprom_val >> 8;
-	if (!priv->r8185) {
-		__le32 anaparam;
-		eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
-		priv->anaparam = le32_to_cpu(anaparam);
-		eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
-	}
-
-	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3);
-	if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
-		printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
-		       " randomly generated MAC addr\n", pci_name(pdev));
-		random_ether_addr(dev->wiphy->perm_addr);
-	}
-
-	/* CCK TX power */
-	for (i = 0; i < 14; i += 2) {
-		u16 txpwr;
-		eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr);
-		priv->channels[i].hw_value = txpwr & 0xFF;
-		priv->channels[i + 1].hw_value = txpwr >> 8;
-	}
-
-	/* OFDM TX power */
-	if (priv->r8185) {
-		for (i = 0; i < 14; i += 2) {
-			u16 txpwr;
-			eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
-			priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
-			priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
-		}
-	}
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	spin_lock_init(&priv->lock);
-
-	err = ieee80211_register_hw(dev);
-	if (err) {
-		printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
-		       pci_name(pdev));
-		goto err_iounmap;
-	}
-
-	printk(KERN_INFO "%s: hwaddr %pM, %s + %s\n",
-	       wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
-	       chip_name, priv->rf->name);
-
-	return 0;
-
- err_iounmap:
-	iounmap(priv->map);
-
- err_free_dev:
-	pci_set_drvdata(pdev, NULL);
-	ieee80211_free_hw(dev);
-
- err_free_reg:
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	return err;
-}
-
-static void __devexit rtl8180_remove(struct pci_dev *pdev)
-{
-	struct ieee80211_hw *dev = pci_get_drvdata(pdev);
-	struct rtl8180_priv *priv;
-
-	if (!dev)
-		return;
-
-	ieee80211_unregister_hw(dev);
-
-	priv = dev->priv;
-
-	pci_iounmap(pdev, priv->map);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	ieee80211_free_hw(dev);
-}
-
-#ifdef CONFIG_PM
-static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-	return 0;
-}
-
-static int rtl8180_resume(struct pci_dev *pdev)
-{
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-static struct pci_driver rtl8180_driver = {
-	.name		= KBUILD_MODNAME,
-	.id_table	= rtl8180_table,
-	.probe		= rtl8180_probe,
-	.remove		= __devexit_p(rtl8180_remove),
-#ifdef CONFIG_PM
-	.suspend	= rtl8180_suspend,
-	.resume		= rtl8180_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init rtl8180_init(void)
-{
-	return pci_register_driver(&rtl8180_driver);
-}
-
-static void __exit rtl8180_exit(void)
-{
-	pci_unregister_driver(&rtl8180_driver);
-}
-
-module_init(rtl8180_init);
-module_exit(rtl8180_exit);