diff options
author | Michael Wu <flamingice@sourmilk.net> | 2007-10-14 22:43:16 +0400 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-01-29 02:09:35 +0300 |
commit | f653211197f3841f383fa9757ef8ce182c6cf627 (patch) | |
tree | ba56e1fa09924d1ffab4f825044175291786b58e /drivers/net/wireless/rtl8180_dev.c | |
parent | fa1c114fdaa605496045e56c42d0c8aa4c139e57 (diff) | |
download | linux-f653211197f3841f383fa9757ef8ce182c6cf627.tar.xz |
Add rtl8180 wireless driver
This patch adds a mac80211 based wireless driver for the rtl8180 and
rtl8185 PCI wireless cards. Also included are some rtl8187 changes
required due to the relationship between that driver and this one.
Michael Wu is primarily responsible for the initial driver and rtl8185
support. Andreas Merello provided the additional rtl8180 support.
Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very
helpful for the rtl8225z2 code.
The Signed-off-by information below is collected from the individual
patches submitted to wireless-2.6 before merging this driver upstream.
Signed-off-by: Andrea Merello <andreamrl@tiscali.it>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/rtl8180_dev.c')
-rw-r--r-- | drivers/net/wireless/rtl8180_dev.c | 1048 |
1 files changed, 1048 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c new file mode 100644 index 000000000000..4b7b032c194a --- /dev/null +++ b/drivers/net/wireless/rtl8180_dev.c @@ -0,0 +1,1048 @@ + +/* + * Linux device driver for RTL8180 / RTL8185 + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andreamrl@tiscali.it> + * + * Based on the r8180 driver, which is: + * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al. + * + * Thanks to Realtek for their support! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/eeprom_93cx6.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "rtl8180_rtl8225.h" +#include "rtl8180_sa2400.h" +#include "rtl8180_max2820.h" +#include "rtl8180_grf5101.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>"); +MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver"); +MODULE_LICENSE("GPL"); + +static struct pci_device_id rtl8180_table[] __devinitdata = { + /* rtl8185 */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) }, + { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) }, + + /* rtl8180 */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) }, + { PCI_DEVICE(0x1799, 0x6001) }, + { PCI_DEVICE(0x1799, 0x6020) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, rtl8180_table); + +void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + int i = 10; + u32 buf; + + buf = (data << 8) | addr; + + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80); + while (i--) { + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf); + if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF)) + return; + } +} + +static void rtl8180_handle_rx(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + unsigned int count = 32; + + while (count--) { + struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx]; + struct sk_buff *skb = priv->rx_buf[priv->rx_idx]; + u32 flags = le32_to_cpu(entry->flags); + + if (flags & RTL8180_RX_DESC_FLAG_OWN) + return; + + if (unlikely(flags & (RTL8180_RX_DESC_FLAG_DMA_FAIL | + RTL8180_RX_DESC_FLAG_FOF | + RTL8180_RX_DESC_FLAG_RX_ERR))) + goto done; + else { + u32 flags2 = le32_to_cpu(entry->flags2); + struct ieee80211_rx_status rx_status = {0}; + struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE); + + if (unlikely(!new_skb)) + goto done; + + pci_unmap_single(priv->pdev, + *((dma_addr_t *)skb->cb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + skb_put(skb, flags & 0xFFF); + + rx_status.antenna = (flags2 >> 15) & 1; + /* TODO: improve signal/rssi reporting */ + rx_status.signal = flags2 & 0xFF; + rx_status.ssi = (flags2 >> 8) & 0x7F; + rx_status.rate = (flags >> 20) & 0xF; + rx_status.freq = dev->conf.freq; + rx_status.channel = dev->conf.channel; + rx_status.phymode = dev->conf.phymode; + rx_status.mactime = le64_to_cpu(entry->tsft); + rx_status.flag |= RX_FLAG_TSFT; + if (flags & RTL8180_RX_DESC_FLAG_CRC32_ERR) + rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; + + ieee80211_rx_irqsafe(dev, skb, &rx_status); + + skb = new_skb; + priv->rx_buf[priv->rx_idx] = skb; + *((dma_addr_t *) skb->cb) = + pci_map_single(priv->pdev, skb_tail_pointer(skb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + } + + done: + entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb)); + entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN | + MAX_RX_SIZE); + if (priv->rx_idx == 31) + entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR); + priv->rx_idx = (priv->rx_idx + 1) % 32; + } +} + +static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; + + while (skb_queue_len(&ring->queue)) { + struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; + struct sk_buff *skb; + struct ieee80211_tx_status status = { {0} }; + struct ieee80211_tx_control *control; + u32 flags = le32_to_cpu(entry->flags); + + if (flags & RTL8180_TX_DESC_FLAG_OWN) + return; + + ring->idx = (ring->idx + 1) % ring->entries; + skb = __skb_dequeue(&ring->queue); + pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf), + skb->len, PCI_DMA_TODEVICE); + + control = *((struct ieee80211_tx_control **)skb->cb); + if (control) + memcpy(&status.control, control, sizeof(*control)); + kfree(control); + + if (!(status.control.flags & IEEE80211_TXCTL_NO_ACK)) { + if (flags & RTL8180_TX_DESC_FLAG_TX_OK) + status.flags = IEEE80211_TX_STATUS_ACK; + else + status.excessive_retries = 1; + } + status.retry_count = flags & 0xFF; + + ieee80211_tx_status_irqsafe(dev, skb, &status); + if (ring->entries - skb_queue_len(&ring->queue) == 2) + ieee80211_wake_queue(dev, prio); + } +} + +static irqreturn_t rtl8180_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct rtl8180_priv *priv = dev->priv; + u16 reg; + + spin_lock(&priv->lock); + reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS); + if (unlikely(reg == 0xFFFF)) { + spin_unlock(&priv->lock); + return IRQ_HANDLED; + } + + rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg); + + if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR)) + rtl8180_handle_tx(dev, 3); + + if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR)) + rtl8180_handle_tx(dev, 2); + + if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR)) + rtl8180_handle_tx(dev, 1); + + if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR)) + rtl8180_handle_tx(dev, 0); + + if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR)) + rtl8180_handle_rx(dev); + + spin_unlock(&priv->lock); + + return IRQ_HANDLED; +} + +static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring; + struct rtl8180_tx_desc *entry; + unsigned long flags; + unsigned int idx, prio; + dma_addr_t mapping; + u32 tx_flags; + u16 plcp_len = 0; + __le16 rts_duration = 0; + + prio = control->queue; + ring = &priv->tx_ring[prio]; + + mapping = pci_map_single(priv->pdev, skb->data, + skb->len, PCI_DMA_TODEVICE); + + tx_flags = RTL8180_TX_DESC_FLAG_OWN | RTL8180_TX_DESC_FLAG_FS | + RTL8180_TX_DESC_FLAG_LS | (control->tx_rate << 24) | + (control->rts_cts_rate << 19) | skb->len; + + if (priv->r8185) + tx_flags |= RTL8180_TX_DESC_FLAG_DMA | + RTL8180_TX_DESC_FLAG_NO_ENC; + + if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) + tx_flags |= RTL8180_TX_DESC_FLAG_RTS; + else if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) + tx_flags |= RTL8180_TX_DESC_FLAG_CTS; + + *((struct ieee80211_tx_control **) skb->cb) = + kmemdup(control, sizeof(*control), GFP_ATOMIC); + + if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) + rts_duration = ieee80211_rts_duration(dev, priv->if_id, skb->len, control); + + if (!priv->r8185) { + unsigned int remainder; + + plcp_len = DIV_ROUND_UP(16 * (skb->len + 4), + (control->rate->rate * 2) / 10); + remainder = (16 * (skb->len + 4)) % + ((control->rate->rate * 2) / 10); + if (remainder > 0 && remainder <= 6) + plcp_len |= 1 << 15; + } + + spin_lock_irqsave(&priv->lock, flags); + idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries; + entry = &ring->desc[idx]; + + entry->rts_duration = rts_duration; + entry->plcp_len = cpu_to_le16(plcp_len); + entry->tx_buf = cpu_to_le32(mapping); + entry->frame_len = cpu_to_le32(skb->len); + entry->flags2 = control->alt_retry_rate != -1 ? + control->alt_retry_rate << 4 : 0; + entry->retry_limit = control->retry_limit; + entry->flags = cpu_to_le32(tx_flags); + __skb_queue_tail(&ring->queue, skb); + if (ring->entries - skb_queue_len(&ring->queue) < 2) + ieee80211_stop_queue(dev, control->queue); + spin_unlock_irqrestore(&priv->lock, flags); + + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4))); + + return 0; +} + +void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); +} + +static int rtl8180_init_hw(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg; + + rtl818x_iowrite8(priv, &priv->map->CMD, 0); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(10); + + /* reset */ + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + rtl818x_ioread8(priv, &priv->map->CMD); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= (1 << 1); + reg |= RTL818X_CMD_RESET; + rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(200); + + /* check success of reset */ + if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) { + printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy)); + return -ETIMEDOUT; + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(200); + + if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) { + /* For cardbus */ + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + reg |= 1 << 1; + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); + reg = rtl818x_ioread16(priv, &priv->map->FEMR); + reg |= (1 << 15) | (1 << 14) | (1 << 4); + rtl818x_iowrite16(priv, &priv->map->FEMR, reg); + } + + rtl818x_iowrite8(priv, &priv->map->MSR, 0); + + if (!priv->r8185) + rtl8180_set_anaparam(priv, priv->anaparam); + + rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); + rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma); + rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma); + rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma); + + /* TODO: necessary? specs indicate not */ + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); + rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3)); + if (priv->r8185) { + reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); + rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4)); + } + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */ + + /* TODO: turn off hw wep on rtl8180 */ + + rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); + + if (priv->r8185) { + rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); + rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81); + rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0); + + rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); + + /* TODO: set ClkRun enable? necessary? */ + reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6)); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2)); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + } else { + rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1); + rtl818x_iowrite8(priv, &priv->map->SECURITY, 0); + + rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6); + rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C); + } + + priv->rf->init(dev); + if (priv->r8185) + rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); + return 0; +} + +static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_rx_desc *entry; + int i; + + priv->rx_ring = pci_alloc_consistent(priv->pdev, + sizeof(*priv->rx_ring) * 32, + &priv->rx_ring_dma); + + if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) { + printk(KERN_ERR "%s: Cannot allocate RX ring\n", + wiphy_name(dev->wiphy)); + return -ENOMEM; + } + + memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32); + priv->rx_idx = 0; + + for (i = 0; i < 32; i++) { + struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE); + dma_addr_t *mapping; + entry = &priv->rx_ring[i]; + if (!skb) + return 0; + + priv->rx_buf[i] = skb; + mapping = (dma_addr_t *)skb->cb; + *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + entry->rx_buf = cpu_to_le32(*mapping); + entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN | + MAX_RX_SIZE); + } + entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR); + return 0; +} + +static void rtl8180_free_rx_ring(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + for (i = 0; i < 32; i++) { + struct sk_buff *skb = priv->rx_buf[i]; + if (!skb) + continue; + + pci_unmap_single(priv->pdev, + *((dma_addr_t *)skb->cb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + kfree_skb(skb); + } + + pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32, + priv->rx_ring, priv->rx_ring_dma); + priv->rx_ring = NULL; +} + +static int rtl8180_init_tx_ring(struct ieee80211_hw *dev, + unsigned int prio, unsigned int entries) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_desc *ring; + dma_addr_t dma; + int i; + + ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma); + if (!ring || (unsigned long)ring & 0xFF) { + printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n", + wiphy_name(dev->wiphy), prio); + return -ENOMEM; + } + + memset(ring, 0, sizeof(*ring)*entries); + priv->tx_ring[prio].desc = ring; + priv->tx_ring[prio].dma = dma; + priv->tx_ring[prio].idx = 0; + priv->tx_ring[prio].entries = entries; + skb_queue_head_init(&priv->tx_ring[prio].queue); + + for (i = 0; i < entries; i++) + ring[i].next_tx_desc = + cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring)); + + return 0; +} + +static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; + + while (skb_queue_len(&ring->queue)) { + struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; + struct sk_buff *skb = __skb_dequeue(&ring->queue); + + pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf), + skb->len, PCI_DMA_TODEVICE); + kfree(*((struct ieee80211_tx_control **) skb->cb)); + kfree_skb(skb); + ring->idx = (ring->idx + 1) % ring->entries; + } + + pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries, + ring->desc, ring->dma); + ring->desc = NULL; +} + +static int rtl8180_start(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int ret, i; + u32 reg; + + ret = rtl8180_init_rx_ring(dev); + if (ret) + return ret; + + for (i = 0; i < 4; i++) + if ((ret = rtl8180_init_tx_ring(dev, i, 16))) + goto err_free_rings; + + ret = rtl8180_init_hw(dev); + if (ret) + goto err_free_rings; + + rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); + rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma); + rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma); + rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma); + + ret = request_irq(priv->pdev->irq, &rtl8180_interrupt, + IRQF_SHARED, KBUILD_MODNAME, dev); + if (ret) { + printk(KERN_ERR "%s: failed to register IRQ handler\n", + wiphy_name(dev->wiphy)); + goto err_free_rings; + } + + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); + + rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); + rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); + + reg = RTL818X_RX_CONF_ONLYERLPKT | + RTL818X_RX_CONF_RX_AUTORESETPHY | + RTL818X_RX_CONF_MGMT | + RTL818X_RX_CONF_DATA | + (7 << 8 /* MAX RX DMA */) | + RTL818X_RX_CONF_BROADCAST | + RTL818X_RX_CONF_NICMAC; + + if (priv->r8185) + reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2; + else { + reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1) + ? RTL818X_RX_CONF_CSDM1 : 0; + reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2) + ? RTL818X_RX_CONF_CSDM2 : 0; + } + + priv->rx_conf = reg; + rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); + + if (priv->r8185) { + reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); + reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT; + reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT; + rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT; + reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT; + rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); + + /* disable early TX */ + rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f); + } + + reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); + reg |= (6 << 21 /* MAX TX DMA */) | + RTL818X_TX_CONF_NO_ICV; + + if (priv->r8185) + reg &= ~RTL818X_TX_CONF_PROBE_DTS; + else + reg &= ~RTL818X_TX_CONF_HW_SEQNUM; + + /* different meaning, same value on both rtl8185 and rtl8180 */ + reg &= ~RTL818X_TX_CONF_SAT_HWPLCP; + + rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg |= RTL818X_CMD_RX_ENABLE; + reg |= RTL818X_CMD_TX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + priv->mode = IEEE80211_IF_TYPE_MNTR; + return 0; + + err_free_rings: + rtl8180_free_rx_ring(dev); + for (i = 0; i < 4; i++) + if (priv->tx_ring[i].desc) + rtl8180_free_tx_ring(dev, i); + + return ret; +} + +static void rtl8180_stop(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u8 reg; + int i; + + priv->mode = IEEE80211_IF_TYPE_INVALID; + + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= ~RTL818X_CMD_TX_ENABLE; + reg &= ~RTL818X_CMD_RX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + priv->rf->stop(dev); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG4); + rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + free_irq(priv->pdev->irq, dev); + + rtl8180_free_rx_ring(dev); + for (i = 0; i < 4; i++) + rtl8180_free_tx_ring(dev, i); +} + +static int rtl8180_add_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + + if (priv->mode != IEEE80211_IF_TYPE_MNTR) + return -EOPNOTSUPP; + + switch (conf->type) { + case IEEE80211_IF_TYPE_STA: + priv->mode = conf->type; + break; + default: + return -EOPNOTSUPP; + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0], + cpu_to_le32(*(u32 *)conf->mac_addr)); + rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4], + cpu_to_le16(*(u16 *)(conf->mac_addr + 4))); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + return 0; +} + +static void rtl8180_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + priv->mode = IEEE80211_IF_TYPE_MNTR; +} + +static int rtl8180_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + + priv->rf->set_chan(dev, conf); + + return 0; +} + +static int rtl8180_config_interface(struct ieee80211_hw *dev, int if_id, + struct ieee80211_if_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + priv->if_id = if_id; + + for (i = 0; i < ETH_ALEN; i++) + rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]); + + if (is_valid_ether_addr(conf->bssid)) + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA); + else + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK); + + return 0; +} + +static void rtl8180_configure_filter(struct ieee80211_hw *dev, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_addr_list *mclist) +{ + struct rtl8180_priv *priv = dev->priv; + + if (changed_flags & FIF_FCSFAIL) + priv->rx_conf ^= RTL818X_RX_CONF_FCS; + if (changed_flags & FIF_CONTROL) + priv->rx_conf ^= RTL818X_RX_CONF_CTRL; + if (changed_flags & FIF_OTHER_BSS) + priv->rx_conf ^= RTL818X_RX_CONF_MONITOR; + if (*total_flags & FIF_ALLMULTI || mc_count > 0) + priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; + else + priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST; + + *total_flags = 0; + + if (priv->rx_conf & RTL818X_RX_CONF_FCS) + *total_flags |= FIF_FCSFAIL; + if (priv->rx_conf & RTL818X_RX_CONF_CTRL) + *total_flags |= FIF_CONTROL; + if (priv->rx_conf & RTL818X_RX_CONF_MONITOR) + *total_flags |= FIF_OTHER_BSS; + if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST) + *total_flags |= FIF_ALLMULTI; + + rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf); +} + +static const struct ieee80211_ops rtl8180_ops = { + .tx = rtl8180_tx, + .start = rtl8180_start, + .stop = rtl8180_stop, + .add_interface = rtl8180_add_interface, + .remove_interface = rtl8180_remove_interface, + .config = rtl8180_config, + .config_interface = rtl8180_config_interface, + .configure_filter = rtl8180_configure_filter, +}; + +static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom) +{ + struct ieee80211_hw *dev = eeprom->data; + struct rtl8180_priv *priv = dev->priv; + u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + + eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; + eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ; + eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK; + eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS; +} + +static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom) +{ + struct ieee80211_hw *dev = eeprom->data; + struct rtl8180_priv *priv = dev->priv; + u8 reg = 2 << 6; + + if (eeprom->reg_data_in) + reg |= RTL818X_EEPROM_CMD_WRITE; + if (eeprom->reg_data_out) + reg |= RTL818X_EEPROM_CMD_READ; + if (eeprom->reg_data_clock) + reg |= RTL818X_EEPROM_CMD_CK; + if (eeprom->reg_chip_select) + reg |= RTL818X_EEPROM_CMD_CS; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); +} + +static int __devinit rtl8180_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct ieee80211_hw *dev; + struct rtl8180_priv *priv; + unsigned long mem_addr, mem_len; + unsigned int io_addr, io_len; + int err, i; + struct eeprom_93cx6 eeprom; + const char *chip_name, *rf_name = NULL; + u32 reg; + u16 eeprom_val; + DECLARE_MAC_BUF(mac); + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n", + pci_name(pdev)); + return err; + } + + err = pci_request_regions(pdev, KBUILD_MODNAME); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n", + pci_name(pdev)); + return err; + } + + io_addr = pci_resource_start(pdev, 0); + io_len = pci_resource_len(pdev, 0); + mem_addr = pci_resource_start(pdev, 1); + mem_len = pci_resource_len(pdev, 1); + + if (mem_len < sizeof(struct rtl818x_csr) || + io_len < sizeof(struct rtl818x_csr)) { + printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + + if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) || + (err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) { + printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n", + pci_name(pdev)); + goto err_free_reg; + } + + pci_set_master(pdev); + + dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops); + if (!dev) { + printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + + priv = dev->priv; + priv->pdev = pdev; + + SET_IEEE80211_DEV(dev, &pdev->dev); + pci_set_drvdata(pdev, dev); + + priv->map = pci_iomap(pdev, 1, mem_len); + if (!priv->map) + priv->map = pci_iomap(pdev, 0, io_len); + + if (!priv->map) { + printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n", + pci_name(pdev)); + goto err_free_dev; + } + + memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels)); + memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates)); + priv->modes[0].mode = MODE_IEEE80211G; + priv->modes[0].num_rates = ARRAY_SIZE(rtl818x_rates); + priv->modes[0].rates = priv->rates; + priv->modes[0].num_channels = ARRAY_SIZE(rtl818x_channels); + priv->modes[0].channels = priv->channels; + priv->modes[1].mode = MODE_IEEE80211B; + priv->modes[1].num_rates = 4; + priv->modes[1].rates = priv->rates; + priv->modes[1].num_channels = ARRAY_SIZE(rtl818x_channels); + priv->modes[1].channels = priv->channels; + priv->mode = IEEE80211_IF_TYPE_INVALID; + dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_RX_INCLUDES_FCS; + dev->queues = 1; + dev->max_rssi = 65; + + reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); + reg &= RTL818X_TX_CONF_HWVER_MASK; + switch (reg) { + case RTL818X_TX_CONF_R8180_ABCD: + chip_name = "RTL8180"; + break; + case RTL818X_TX_CONF_R8180_F: + chip_name = "RTL8180vF"; + break; + case RTL818X_TX_CONF_R8185_ABC: + chip_name = "RTL8185"; + break; + case RTL818X_TX_CONF_R8185_D: + chip_name = "RTL8185vD"; + break; + default: + printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n", + pci_name(pdev), reg >> 25); + goto err_iounmap; + } + + priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC; + if (priv->r8185) { + if ((err = ieee80211_register_hwmode(dev, &priv->modes[0]))) + goto err_iounmap; + + pci_try_set_mwi(pdev); + } + + if ((err = ieee80211_register_hwmode(dev, &priv->modes[1]))) + goto err_iounmap; + + eeprom.data = dev; + eeprom.register_read = rtl8180_eeprom_register_read; + eeprom.register_write = rtl8180_eeprom_register_write; + if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) + eeprom.width = PCI_EEPROM_WIDTH_93C66; + else + eeprom.width = PCI_EEPROM_WIDTH_93C46; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val); + eeprom_val &= 0xFF; + switch (eeprom_val) { + case 1: rf_name = "Intersil"; + break; + case 2: rf_name = "RFMD"; + break; + case 3: priv->rf = &sa2400_rf_ops; + break; + case 4: priv->rf = &max2820_rf_ops; + break; + case 5: priv->rf = &grf5101_rf_ops; + break; + case 9: priv->rf = rtl8180_detect_rf(dev); + break; + case 10: + rf_name = "RTL8255"; + break; + default: + printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n", + pci_name(pdev), eeprom_val); + goto err_iounmap; + } + + if (!priv->rf) { + printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n", + pci_name(pdev), rf_name); + goto err_iounmap; + } + + eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val); + priv->csthreshold = eeprom_val >> 8; + if (!priv->r8185) { + __le32 anaparam; + eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2); + priv->anaparam = le32_to_cpu(anaparam); + eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam); + } + + eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3); + if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using" + " randomly generated MAC addr\n", pci_name(pdev)); + random_ether_addr(dev->wiphy->perm_addr); + } + + /* CCK TX power */ + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr); + priv->channels[i].val = txpwr & 0xFF; + priv->channels[i + 1].val = txpwr >> 8; + } + + /* OFDM TX power */ + if (priv->r8185) { + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr); + priv->channels[i].val |= (txpwr & 0xFF) << 8; + priv->channels[i + 1].val |= txpwr & 0xFF00; + } + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + spin_lock_init(&priv->lock); + + err = ieee80211_register_hw(dev); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot register device\n", + pci_name(pdev)); + goto err_iounmap; + } + + printk(KERN_INFO "%s: hwaddr %s, %s + %s\n", + wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr), + chip_name, priv->rf->name); + + return 0; + + err_iounmap: + iounmap(priv->map); + + err_free_dev: + pci_set_drvdata(pdev, NULL); + ieee80211_free_hw(dev); + + err_free_reg: + pci_release_regions(pdev); + pci_disable_device(pdev); + return err; +} + +static void __devexit rtl8180_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct rtl8180_priv *priv; + + if (!dev) + return; + + ieee80211_unregister_hw(dev); + + priv = dev->priv; + + pci_iounmap(pdev, priv->map); + pci_release_regions(pdev); + pci_disable_device(pdev); + ieee80211_free_hw(dev); +} + +#ifdef CONFIG_PM +static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state) +{ + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +static int rtl8180_resume(struct pci_dev *pdev) +{ + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + return 0; +} + +#endif /* CONFIG_PM */ + +static struct pci_driver rtl8180_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl8180_table, + .probe = rtl8180_probe, + .remove = __devexit_p(rtl8180_remove), +#ifdef CONFIG_PM + .suspend = rtl8180_suspend, + .resume = rtl8180_resume, +#endif /* CONFIG_PM */ +}; + +static int __init rtl8180_init(void) +{ + return pci_register_driver(&rtl8180_driver); +} + +static void __exit rtl8180_exit(void) +{ + pci_unregister_driver(&rtl8180_driver); +} + +module_init(rtl8180_init); +module_exit(rtl8180_exit); |