Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)

30 files changed, 1768 insertions, 1062 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index ad2c98af7e9d..5063e01410e5 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -586,9 +586,11 @@ static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev,
 static inline void rt2400pci_set_vgc(struct rt2x00_dev *rt2x00dev,
 				     struct link_qual *qual, u8 vgc_level)
 {
-	rt2400pci_bbp_write(rt2x00dev, 13, vgc_level);
-	qual->vgc_level = vgc_level;
-	qual->vgc_level_reg = vgc_level;
+	if (qual->vgc_level_reg != vgc_level) {
+		rt2400pci_bbp_write(rt2x00dev, 13, vgc_level);
+		qual->vgc_level = vgc_level;
+		qual->vgc_level_reg = vgc_level;
+	}
 }
 
 static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
@@ -877,7 +879,8 @@ static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
 static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 				 enum dev_state state)
 {
-	int mask = (state == STATE_RADIO_IRQ_OFF);
+	int mask = (state == STATE_RADIO_IRQ_OFF) ||
+		   (state == STATE_RADIO_IRQ_OFF_ISR);
 	u32 reg;
 
 	/*
@@ -978,7 +981,9 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2400pci_toggle_rx(rt2x00dev, state);
 		break;
 	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
+	case STATE_RADIO_IRQ_OFF_ISR:
 		rt2400pci_toggle_irq(rt2x00dev, state);
 		break;
 	case STATE_DEEP_SLEEP:
@@ -1076,9 +1081,6 @@ static void rt2400pci_write_beacon(struct queue_entry *entry,
 				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-	u32 word;
 	u32 reg;
 
 	/*
@@ -1091,9 +1093,15 @@ static void rt2400pci_write_beacon(struct queue_entry *entry,
 
 	rt2x00queue_map_txskb(rt2x00dev, entry->skb);
 
-	rt2x00_desc_read(entry_priv->desc, 1, &word);
-	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
-	rt2x00_desc_write(entry_priv->desc, 1, word);
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt2400pci_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
 	 * Enable beaconing again.
@@ -1230,23 +1238,10 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
 	}
 }
 
-static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt2400pci_interrupt_thread(int irq, void *dev_instance)
 {
 	struct rt2x00_dev *rt2x00dev = dev_instance;
-	u32 reg;
-
-	/*
-	 * Get the interrupt sources & saved to local variable.
-	 * Write register value back to clear pending interrupts.
-	 */
-	rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
-	rt2x00pci_register_write(rt2x00dev, CSR7, reg);
-
-	if (!reg)
-		return IRQ_NONE;
-
-	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-		return IRQ_HANDLED;
+	u32 reg = rt2x00dev->irqvalue[0];
 
 	/*
 	 * Handle interrupts, walk through all bits
@@ -1284,9 +1279,40 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
 	if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
 		rt2400pci_txdone(rt2x00dev, QID_AC_BK);
 
+	/* Enable interrupts again. */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+					      STATE_RADIO_IRQ_ON_ISR);
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
+{
+	struct rt2x00_dev *rt2x00dev = dev_instance;
+	u32 reg;
+
+	/*
+	 * Get the interrupt sources & saved to local variable.
+	 * Write register value back to clear pending interrupts.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
+	rt2x00pci_register_write(rt2x00dev, CSR7, reg);
+
+	if (!reg)
+		return IRQ_NONE;
+
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return IRQ_HANDLED;
+
+	/* Store irqvalues for use in the interrupt thread. */
+	rt2x00dev->irqvalue[0] = reg;
+
+	/* Disable interrupts, will be enabled again in the interrupt thread. */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+					      STATE_RADIO_IRQ_OFF_ISR);
+
+	return IRQ_WAKE_THREAD;
+}
+
 /*
  * Device probe functions.
  */
@@ -1396,8 +1422,8 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Check if the BBP tuning should be enabled.
 	 */
-	if (!rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING))
-		__set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
+	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING))
+		__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
 
 	return 0;
 }
@@ -1563,7 +1589,8 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
 	.configure_filter	= rt2x00mac_configure_filter,
-	.set_tim		= rt2x00mac_set_tim,
+	.sw_scan_start		= rt2x00mac_sw_scan_start,
+	.sw_scan_complete	= rt2x00mac_sw_scan_complete,
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2400pci_conf_tx,
@@ -1574,6 +1601,7 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
 
 static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
 	.irq_handler		= rt2400pci_interrupt,
+	.irq_handler_thread	= rt2400pci_interrupt_thread,
 	.probe_hw		= rt2400pci_probe_hw,
 	.initialize		= rt2x00pci_initialize,
 	.uninitialize		= rt2x00pci_uninitialize,
@@ -1585,7 +1613,6 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
 	.reset_tuner		= rt2400pci_reset_tuner,
 	.link_tuner		= rt2400pci_link_tuner,
 	.write_tx_desc		= rt2400pci_write_tx_desc,
-	.write_tx_data		= rt2x00pci_write_tx_data,
 	.write_beacon		= rt2400pci_write_beacon,
 	.kick_tx_queue		= rt2400pci_kick_tx_queue,
 	.kill_tx_queue		= rt2400pci_kill_tx_queue,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 41da3d218c65..c2a555d5376b 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -626,6 +626,7 @@ static inline void rt2500pci_set_vgc(struct rt2x00_dev *rt2x00dev,
 {
 	if (qual->vgc_level_reg != vgc_level) {
 		rt2500pci_bbp_write(rt2x00dev, 17, vgc_level);
+		qual->vgc_level = vgc_level;
 		qual->vgc_level_reg = vgc_level;
 	}
 }
@@ -700,13 +701,10 @@ dynamic_cca_tune:
 	 * R17 is inside the dynamic tuning range,
 	 * start tuning the link based on the false cca counter.
 	 */
-	if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40) {
+	if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40)
 		rt2500pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level_reg);
-		qual->vgc_level = qual->vgc_level_reg;
-	} else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32) {
+	else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32)
 		rt2500pci_set_vgc(rt2x00dev, qual, --qual->vgc_level_reg);
-		qual->vgc_level = qual->vgc_level_reg;
-	}
 }
 
 /*
@@ -1035,7 +1033,8 @@ static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
 static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 				 enum dev_state state)
 {
-	int mask = (state == STATE_RADIO_IRQ_OFF);
+	int mask = (state == STATE_RADIO_IRQ_OFF) ||
+		   (state == STATE_RADIO_IRQ_OFF_ISR);
 	u32 reg;
 
 	/*
@@ -1136,7 +1135,9 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2500pci_toggle_rx(rt2x00dev, state);
 		break;
 	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
+	case STATE_RADIO_IRQ_OFF_ISR:
 		rt2500pci_toggle_irq(rt2x00dev, state);
 		break;
 	case STATE_DEEP_SLEEP:
@@ -1233,9 +1234,6 @@ static void rt2500pci_write_beacon(struct queue_entry *entry,
 				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-	u32 word;
 	u32 reg;
 
 	/*
@@ -1248,9 +1246,15 @@ static void rt2500pci_write_beacon(struct queue_entry *entry,
 
 	rt2x00queue_map_txskb(rt2x00dev, entry->skb);
 
-	rt2x00_desc_read(entry_priv->desc, 1, &word);
-	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
-	rt2x00_desc_write(entry_priv->desc, 1, word);
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt2500pci_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
 	 * Enable beaconing again.
@@ -1366,23 +1370,10 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
 	}
 }
 
-static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt2500pci_interrupt_thread(int irq, void *dev_instance)
 {
 	struct rt2x00_dev *rt2x00dev = dev_instance;
-	u32 reg;
-
-	/*
-	 * Get the interrupt sources & saved to local variable.
-	 * Write register value back to clear pending interrupts.
-	 */
-	rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
-	rt2x00pci_register_write(rt2x00dev, CSR7, reg);
-
-	if (!reg)
-		return IRQ_NONE;
-
-	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-		return IRQ_HANDLED;
+	u32 reg = rt2x00dev->irqvalue[0];
 
 	/*
 	 * Handle interrupts, walk through all bits
@@ -1420,9 +1411,41 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
 	if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
 		rt2500pci_txdone(rt2x00dev, QID_AC_BK);
 
+	/* Enable interrupts again. */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+					      STATE_RADIO_IRQ_ON_ISR);
+
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
+{
+	struct rt2x00_dev *rt2x00dev = dev_instance;
+	u32 reg;
+
+	/*
+	 * Get the interrupt sources & saved to local variable.
+	 * Write register value back to clear pending interrupts.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
+	rt2x00pci_register_write(rt2x00dev, CSR7, reg);
+
+	if (!reg)
+		return IRQ_NONE;
+
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return IRQ_HANDLED;
+
+	/* Store irqvalues for use in the interrupt thread. */
+	rt2x00dev->irqvalue[0] = reg;
+
+	/* Disable interrupts, will be enabled again in the interrupt thread. */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+					      STATE_RADIO_IRQ_OFF_ISR);
+
+	return IRQ_WAKE_THREAD;
+}
+
 /*
  * Device probe functions.
  */
@@ -1554,9 +1577,8 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * Check if the BBP tuning should be enabled.
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-
-	if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
-		__set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
+	if (!rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
+		__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
 
 	/*
 	 * Read the RSSI <-> dBm offset information.
@@ -1861,7 +1883,8 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
 	.configure_filter	= rt2x00mac_configure_filter,
-	.set_tim		= rt2x00mac_set_tim,
+	.sw_scan_start		= rt2x00mac_sw_scan_start,
+	.sw_scan_complete	= rt2x00mac_sw_scan_complete,
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2x00mac_conf_tx,
@@ -1872,6 +1895,7 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
 
 static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
 	.irq_handler		= rt2500pci_interrupt,
+	.irq_handler_thread	= rt2500pci_interrupt_thread,
 	.probe_hw		= rt2500pci_probe_hw,
 	.initialize		= rt2x00pci_initialize,
 	.uninitialize		= rt2x00pci_uninitialize,
@@ -1883,7 +1907,6 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
 	.reset_tuner		= rt2500pci_reset_tuner,
 	.link_tuner		= rt2500pci_link_tuner,
 	.write_tx_desc		= rt2500pci_write_tx_desc,
-	.write_tx_data		= rt2x00pci_write_tx_data,
 	.write_beacon		= rt2500pci_write_beacon,
 	.kick_tx_queue		= rt2500pci_kick_tx_queue,
 	.kill_tx_queue		= rt2500pci_kill_tx_queue,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 9ae96a626e6d..cdaf93f48263 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -345,12 +345,20 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_crypto *crypto,
 				struct ieee80211_key_conf *key)
 {
-	int timeout;
 	u32 mask;
 	u16 reg;
+	enum cipher curr_cipher;
 
 	if (crypto->cmd == SET_KEY) {
 		/*
+		 * Disallow to set WEP key other than with index 0,
+		 * it is known that not work at least on some hardware.
+		 * SW crypto will be used in that case.
+		 */
+		if (key->alg == ALG_WEP && key->keyidx != 0)
+			return -EOPNOTSUPP;
+
+		/*
 		 * Pairwise key will always be entry 0, but this
 		 * could collide with a shared key on the same
 		 * position...
@@ -358,6 +366,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 		mask = TXRX_CSR0_KEY_ID.bit_mask;
 
 		rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+		curr_cipher = rt2x00_get_field16(reg, TXRX_CSR0_ALGORITHM);
 		reg &= mask;
 
 		if (reg && reg == mask)
@@ -366,19 +375,17 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 		reg = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
 
 		key->hw_key_idx += reg ? ffz(reg) : 0;
-
 		/*
-		 * The encryption key doesn't fit within the CSR cache,
-		 * this means we should allocate it separately and use
-		 * rt2x00usb_vendor_request() to send the key to the hardware.
+		 * Hardware requires that all keys use the same cipher
+		 * (e.g. TKIP-only, AES-only, but not TKIP+AES).
+		 * If this is not the first key, compare the cipher with the
+		 * first one and fall back to SW crypto if not the same.
 		 */
-		reg = KEY_ENTRY(key->hw_key_idx);
-		timeout = REGISTER_TIMEOUT32(sizeof(crypto->key));
-		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-						    USB_VENDOR_REQUEST_OUT, reg,
-						    crypto->key,
-						    sizeof(crypto->key),
-						    timeout);
+		if (key->hw_key_idx > 0 && crypto->cipher != curr_cipher)
+			return -EOPNOTSUPP;
+
+		rt2500usb_register_multiwrite(rt2x00dev, KEY_ENTRY(key->hw_key_idx),
+					      crypto->key, sizeof(crypto->key));
 
 		/*
 		 * The driver does not support the IV/EIV generation
@@ -818,6 +825,7 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
 
 	rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+	rt2x00_set_field16(&reg, TXRX_CSR0_ALGORITHM, CIPHER_NONE);
 	rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
 	rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0);
 	rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
@@ -1005,7 +1013,9 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2500usb_toggle_rx(rt2x00dev, state);
 		break;
 	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
+	case STATE_RADIO_IRQ_OFF_ISR:
 		/* No support, but no error either */
 		break;
 	case STATE_DEEP_SLEEP:
@@ -1034,7 +1044,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 				    struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	__le32 *txd = (__le32 *)(skb->data - TXD_DESC_SIZE);
+	__le32 *txd = (__le32 *) skb->data;
 	u32 word;
 
 	/*
@@ -1080,6 +1090,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Register descriptor details in skb frame descriptor.
 	 */
+	skbdesc->flags |= SKBDESC_DESC_IN_SKB;
 	skbdesc->desc = txd;
 	skbdesc->desc_len = TXD_DESC_SIZE;
 }
@@ -1108,9 +1119,20 @@ static void rt2500usb_write_beacon(struct queue_entry *entry,
 	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 
 	/*
-	 * Take the descriptor in front of the skb into account.
+	 * Add space for the descriptor in front of the skb.
 	 */
 	skb_push(entry->skb, TXD_DESC_SIZE);
+	memset(entry->skb->data, 0, TXD_DESC_SIZE);
+
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt2500usb_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
 	 * USB devices cannot blindly pass the skb->len as the
@@ -1460,13 +1482,6 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
 
 	/*
-	 * Check if the BBP tuning should be disabled.
-	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-	if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
-		__set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
-
-	/*
 	 * Read the RSSI <-> dBm offset information.
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
@@ -1732,7 +1747,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 		__set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags);
 	}
-	__set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
+	__set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -1752,6 +1767,8 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
 	.configure_filter	= rt2x00mac_configure_filter,
 	.set_tim		= rt2x00mac_set_tim,
 	.set_key		= rt2x00mac_set_key,
+	.sw_scan_start		= rt2x00mac_sw_scan_start,
+	.sw_scan_complete	= rt2x00mac_sw_scan_complete,
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2x00mac_conf_tx,
@@ -1767,8 +1784,8 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
 	.rfkill_poll		= rt2500usb_rfkill_poll,
 	.link_stats		= rt2500usb_link_stats,
 	.reset_tuner		= rt2500usb_reset_tuner,
+	.watchdog		= rt2x00usb_watchdog,
 	.write_tx_desc		= rt2500usb_write_tx_desc,
-	.write_tx_data		= rt2x00usb_write_tx_data,
 	.write_beacon		= rt2500usb_write_beacon,
 	.get_tx_data_len	= rt2500usb_get_tx_data_len,
 	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 2aa03751c341..ed4ebcdde7c9 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -63,7 +63,6 @@
  */
 #define REV_RT2860C			0x0100
 #define REV_RT2860D			0x0101
-#define REV_RT2870D			0x0101
 #define REV_RT2872E			0x0200
 #define REV_RT3070E			0x0200
 #define REV_RT3070F			0x0201
@@ -75,7 +74,7 @@
  * Signal information.
  * Default offset is required for RSSI <-> dBm conversion.
  */
-#define DEFAULT_RSSI_OFFSET		120 /* FIXME */
+#define DEFAULT_RSSI_OFFSET		120
 
 /*
  * Register layout information.
@@ -99,6 +98,21 @@
  */
 
 /*
+ * E2PROM_CSR: PCI EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content.
+ * TYPE: 0: 93c46, 1:93c66.
+ * LOAD_STATUS: 1:loading, 0:done.
+ */
+#define E2PROM_CSR			0x0004
+#define E2PROM_CSR_DATA_CLOCK		FIELD32(0x00000001)
+#define E2PROM_CSR_CHIP_SELECT		FIELD32(0x00000002)
+#define E2PROM_CSR_DATA_IN		FIELD32(0x00000004)
+#define E2PROM_CSR_DATA_OUT		FIELD32(0x00000008)
+#define E2PROM_CSR_TYPE			FIELD32(0x00000030)
+#define E2PROM_CSR_LOAD_STATUS		FIELD32(0x00000040)
+#define E2PROM_CSR_RELOAD		FIELD32(0x00000080)
+
+/*
  * OPT_14: Unknown register used by rt3xxx devices.
  */
 #define OPT_14_CSR			0x0114
@@ -322,6 +336,39 @@
 #define RX_DRX_IDX			0x029c
 
 /*
+ * USB_DMA_CFG
+ * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
+ * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
+ * PHY_CLEAR: phy watch dog enable.
+ * TX_CLEAR: Clear USB DMA TX path.
+ * TXOP_HALT: Halt TXOP count down when TX buffer is full.
+ * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
+ * RX_BULK_EN: Enable USB DMA Rx.
+ * TX_BULK_EN: Enable USB DMA Tx.
+ * EP_OUT_VALID: OUT endpoint data valid.
+ * RX_BUSY: USB DMA RX FSM busy.
+ * TX_BUSY: USB DMA TX FSM busy.
+ */
+#define USB_DMA_CFG			0x02a0
+#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT	FIELD32(0x000000ff)
+#define USB_DMA_CFG_RX_BULK_AGG_LIMIT	FIELD32(0x0000ff00)
+#define USB_DMA_CFG_PHY_CLEAR		FIELD32(0x00010000)
+#define USB_DMA_CFG_TX_CLEAR		FIELD32(0x00080000)
+#define USB_DMA_CFG_TXOP_HALT		FIELD32(0x00100000)
+#define USB_DMA_CFG_RX_BULK_AGG_EN	FIELD32(0x00200000)
+#define USB_DMA_CFG_RX_BULK_EN		FIELD32(0x00400000)
+#define USB_DMA_CFG_TX_BULK_EN		FIELD32(0x00800000)
+#define USB_DMA_CFG_EP_OUT_VALID	FIELD32(0x3f000000)
+#define USB_DMA_CFG_RX_BUSY		FIELD32(0x40000000)
+#define USB_DMA_CFG_TX_BUSY		FIELD32(0x80000000)
+
+/*
+ * US_CYC_CNT
+ */
+#define US_CYC_CNT			0x02a4
+#define US_CYC_CNT_CLOCK_CYCLE		FIELD32(0x000000ff)
+
+/*
  * PBF_SYS_CTRL
  * HOST_RAM_WRITE: enable Host program ram write selection
  */
@@ -672,14 +719,20 @@
 #define TBTT_TIMER			0x1124
 
 /*
- * INT_TIMER_CFG:
+ * INT_TIMER_CFG: timer configuration
+ * PRE_TBTT_TIMER: leadtime to tbtt for pretbtt interrupt in units of 1/16 TU
+ * GP_TIMER: period of general purpose timer in units of 1/16 TU
  */
 #define INT_TIMER_CFG			0x1128
+#define INT_TIMER_CFG_PRE_TBTT_TIMER	FIELD32(0x0000ffff)
+#define INT_TIMER_CFG_GP_TIMER		FIELD32(0xffff0000)
 
 /*
  * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
  */
 #define INT_TIMER_EN			0x112c
+#define INT_TIMER_EN_PRE_TBTT_TIMER	FIELD32(0x00000001)
+#define INT_TIMER_EN_GP_TIMER		FIELD32(0x00000002)
 
 /*
  * CH_IDLE_STA: channel idle time
@@ -756,6 +809,18 @@
 #define EDCA_TID_AC_MAP			0x1310
 
 /*
+ * TX_PWR_CFG:
+ */
+#define TX_PWR_CFG_RATE0		FIELD32(0x0000000f)
+#define TX_PWR_CFG_RATE1		FIELD32(0x000000f0)
+#define TX_PWR_CFG_RATE2		FIELD32(0x00000f00)
+#define TX_PWR_CFG_RATE3		FIELD32(0x0000f000)
+#define TX_PWR_CFG_RATE4		FIELD32(0x000f0000)
+#define TX_PWR_CFG_RATE5		FIELD32(0x00f00000)
+#define TX_PWR_CFG_RATE6		FIELD32(0x0f000000)
+#define TX_PWR_CFG_RATE7		FIELD32(0xf0000000)
+
+/*
  * TX_PWR_CFG_0:
  */
 #define TX_PWR_CFG_0			0x1314
@@ -1370,17 +1435,17 @@
 struct mac_wcid_entry {
 	u8 mac[6];
 	u8 reserved[2];
-} __attribute__ ((packed));
+} __packed;
 
 struct hw_key_entry {
 	u8 key[16];
 	u8 tx_mic[8];
 	u8 rx_mic[8];
-} __attribute__ ((packed));
+} __packed;
 
 struct mac_iveiv_entry {
 	u8 iv[8];
-} __attribute__ ((packed));
+} __packed;
 
 /*
  * MAC_WCID_ATTRIBUTE:
@@ -1389,6 +1454,10 @@ struct mac_iveiv_entry {
 #define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
 #define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
 #define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
+#define MAC_WCID_ATTRIBUTE_CIPHER_EXT	FIELD32(0x00000400)
+#define MAC_WCID_ATTRIBUTE_BSS_IDX_EXT	FIELD32(0x00000800)
+#define MAC_WCID_ATTRIBUTE_WAPI_MCBC	FIELD32(0x00008000)
+#define MAC_WCID_ATTRIBUTE_WAPI_KEY_IDX	FIELD32(0xff000000)
 
 /*
  * SHARED_KEY_MODE:
@@ -1510,7 +1579,9 @@ struct mac_iveiv_entry {
  */
 
 /*
- * BBP 1: TX Antenna
+ * BBP 1: TX Antenna & Power
+ * POWER: 0 - normal, 1 - drop tx power by 6dBm, 2 - drop tx power by 12dBm,
+ *	3 - increase tx power by 6dBm
  */
 #define BBP1_TX_POWER			FIELD8(0x07)
 #define BBP1_TX_ANTENNA			FIELD8(0x18)
@@ -1800,9 +1871,15 @@ struct mac_iveiv_entry {
 #define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
 
 /*
- * EEPROM TXpower byrate: 20MHZ power
+ * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode
  */
 #define EEPROM_TXPOWER_BYRATE		0x006f
+#define EEPROM_TXPOWER_BYRATE_SIZE	9
+
+#define EEPROM_TXPOWER_BYRATE_RATE0	FIELD16(0x000f)
+#define EEPROM_TXPOWER_BYRATE_RATE1	FIELD16(0x00f0)
+#define EEPROM_TXPOWER_BYRATE_RATE2	FIELD16(0x0f00)
+#define EEPROM_TXPOWER_BYRATE_RATE3	FIELD16(0xf000)
 
 /*
  * EEPROM BBP.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index db4250d1c8b3..b66e0fd8f0fa 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1,9 +1,9 @@
 /*
+	Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
 	Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
 
 	Based on the original rt2800pci.c and rt2800usb.c.
-	  Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	  Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
 	  Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
 	  Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
@@ -33,21 +33,14 @@
 	Abstract: rt2800 generic device routines.
  */
 
+#include <linux/crc-ccitt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 
 #include "rt2x00.h"
-#if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE)
-#include "rt2x00usb.h"
-#endif
 #include "rt2800lib.h"
 #include "rt2800.h"
-#include "rt2800usb.h"
-
-MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("rt2800 library");
-MODULE_LICENSE("GPL");
 
 /*
  * Register access.
@@ -107,8 +100,7 @@ static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
-		if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
-			rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
 
 		rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
 	}
@@ -136,8 +128,7 @@ static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
-		if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
-			rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
 
 		rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
 
@@ -282,9 +273,162 @@ int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
 }
 EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
 
-void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc)
+static bool rt2800_check_firmware_crc(const u8 *data, const size_t len)
+{
+	u16 fw_crc;
+	u16 crc;
+
+	/*
+	 * The last 2 bytes in the firmware array are the crc checksum itself,
+	 * this means that we should never pass those 2 bytes to the crc
+	 * algorithm.
+	 */
+	fw_crc = (data[len - 2] << 8 | data[len - 1]);
+
+	/*
+	 * Use the crc ccitt algorithm.
+	 * This will return the same value as the legacy driver which
+	 * used bit ordering reversion on the both the firmware bytes
+	 * before input input as well as on the final output.
+	 * Obviously using crc ccitt directly is much more efficient.
+	 */
+	crc = crc_ccitt(~0, data, len - 2);
+
+	/*
+	 * There is a small difference between the crc-itu-t + bitrev and
+	 * the crc-ccitt crc calculation. In the latter method the 2 bytes
+	 * will be swapped, use swab16 to convert the crc to the correct
+	 * value.
+	 */
+	crc = swab16(crc);
+
+	return fw_crc == crc;
+}
+
+int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
+			  const u8 *data, const size_t len)
+{
+	size_t offset = 0;
+	size_t fw_len;
+	bool multiple;
+
+	/*
+	 * PCI(e) & SOC devices require firmware with a length
+	 * of 8kb. USB devices require firmware files with a length
+	 * of 4kb. Certain USB chipsets however require different firmware,
+	 * which Ralink only provides attached to the original firmware
+	 * file. Thus for USB devices, firmware files have a length
+	 * which is a multiple of 4kb.
+	 */
+	if (rt2x00_is_usb(rt2x00dev)) {
+		fw_len = 4096;
+		multiple = true;
+	} else {
+		fw_len = 8192;
+		multiple = true;
+	}
+
+	/*
+	 * Validate the firmware length
+	 */
+	if (len != fw_len && (!multiple || (len % fw_len) != 0))
+		return FW_BAD_LENGTH;
+
+	/*
+	 * Check if the chipset requires one of the upper parts
+	 * of the firmware.
+	 */
+	if (rt2x00_is_usb(rt2x00dev) &&
+	    !rt2x00_rt(rt2x00dev, RT2860) &&
+	    !rt2x00_rt(rt2x00dev, RT2872) &&
+	    !rt2x00_rt(rt2x00dev, RT3070) &&
+	    ((len / fw_len) == 1))
+		return FW_BAD_VERSION;
+
+	/*
+	 * 8kb firmware files must be checked as if it were
+	 * 2 separate firmware files.
+	 */
+	while (offset < len) {
+		if (!rt2800_check_firmware_crc(data + offset, fw_len))
+			return FW_BAD_CRC;
+
+		offset += fw_len;
+	}
+
+	return FW_OK;
+}
+EXPORT_SYMBOL_GPL(rt2800_check_firmware);
+
+int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
+			 const u8 *data, const size_t len)
+{
+	unsigned int i;
+	u32 reg;
+
+	/*
+	 * Wait for stable hardware.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
+		if (reg && reg != ~0)
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "Unstable hardware.\n");
+		return -EBUSY;
+	}
+
+	if (rt2x00_is_pci(rt2x00dev))
+		rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
+
+	/*
+	 * Disable DMA, will be reenabled later when enabling
+	 * the radio.
+	 */
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	/*
+	 * Write firmware to the device.
+	 */
+	rt2800_drv_write_firmware(rt2x00dev, data, len);
+
+	/*
+	 * Wait for device to stabilize.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "PBF system register not ready.\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Initialize firmware.
+	 */
+	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	msleep(1);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_load_firmware);
+
+void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc)
 {
-	__le32 *txwi = (__le32 *)(skb->data - TXWI_DESC_SIZE);
 	u32 word;
 
 	/*
@@ -336,9 +480,53 @@ void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc)
 }
 EXPORT_SYMBOL_GPL(rt2800_write_txwi);
 
-void rt2800_process_rxwi(struct sk_buff *skb, struct rxdone_entry_desc *rxdesc)
+static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2)
 {
-	__le32 *rxwi = (__le32 *) skb->data;
+	int rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
+	int rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
+	int rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
+	u16 eeprom;
+	u8 offset0;
+	u8 offset1;
+	u8 offset2;
+
+	if (rt2x00dev->rx_status.band == IEEE80211_BAND_2GHZ) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom);
+		offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0);
+		offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1);
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+		offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_OFFSET2);
+	} else {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &eeprom);
+		offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET0);
+		offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET1);
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+		offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_OFFSET2);
+	}
+
+	/*
+	 * Convert the value from the descriptor into the RSSI value
+	 * If the value in the descriptor is 0, it is considered invalid
+	 * and the default (extremely low) rssi value is assumed
+	 */
+	rssi0 = (rssi0) ? (-12 - offset0 - rt2x00dev->lna_gain - rssi0) : -128;
+	rssi1 = (rssi1) ? (-12 - offset1 - rt2x00dev->lna_gain - rssi1) : -128;
+	rssi2 = (rssi2) ? (-12 - offset2 - rt2x00dev->lna_gain - rssi2) : -128;
+
+	/*
+	 * mac80211 only accepts a single RSSI value. Calculating the
+	 * average doesn't deliver a fair answer either since -60:-60 would
+	 * be considered equally good as -50:-70 while the second is the one
+	 * which gives less energy...
+	 */
+	rssi0 = max(rssi0, rssi1);
+	return max(rssi0, rssi2);
+}
+
+void rt2800_process_rxwi(struct queue_entry *entry,
+			 struct rxdone_entry_desc *rxdesc)
+{
+	__le32 *rxwi = (__le32 *) entry->skb->data;
 	u32 word;
 
 	rt2x00_desc_read(rxwi, 0, &word);
@@ -369,17 +557,93 @@ void rt2800_process_rxwi(struct sk_buff *skb, struct rxdone_entry_desc *rxdesc)
 
 	rt2x00_desc_read(rxwi, 2, &word);
 
-	rxdesc->rssi =
-	    (rt2x00_get_field32(word, RXWI_W2_RSSI0) +
-	     rt2x00_get_field32(word, RXWI_W2_RSSI1)) / 2;
+	/*
+	 * Convert descriptor AGC value to RSSI value.
+	 */
+	rxdesc->rssi = rt2800_agc_to_rssi(entry->queue->rt2x00dev, word);
 
 	/*
 	 * Remove RXWI descriptor from start of buffer.
 	 */
-	skb_pull(skb, RXWI_DESC_SIZE);
+	skb_pull(entry->skb, RXWI_DESC_SIZE);
 }
 EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
 
+void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	unsigned int beacon_base;
+	u32 reg;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	/*
+	 * Add space for the TXWI in front of the skb.
+	 */
+	skb_push(entry->skb, TXWI_DESC_SIZE);
+	memset(entry->skb, 0, TXWI_DESC_SIZE);
+
+	/*
+	 * Register descriptor details in skb frame descriptor.
+	 */
+	skbdesc->flags |= SKBDESC_DESC_IN_SKB;
+	skbdesc->desc = entry->skb->data;
+	skbdesc->desc_len = TXWI_DESC_SIZE;
+
+	/*
+	 * Add the TXWI for the beacon to the skb.
+	 */
+	rt2800_write_txwi((__le32 *)entry->skb->data, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
+
+	/*
+	 * Write entire beacon with TXWI to register.
+	 */
+	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
+	rt2800_register_multiwrite(rt2x00dev, beacon_base,
+				   entry->skb->data, entry->skb->len);
+
+	/*
+	 * Enable beaconing again.
+	 */
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	/*
+	 * Clean up beacon skb.
+	 */
+	dev_kfree_skb_any(entry->skb);
+	entry->skb = NULL;
+}
+EXPORT_SYMBOL_GPL(rt2800_write_beacon);
+
+static void inline rt2800_clear_beacon(struct rt2x00_dev *rt2x00dev,
+				       unsigned int beacon_base)
+{
+	int i;
+
+	/*
+	 * For the Beacon base registers we only need to clear
+	 * the whole TXWI which (when set to 0) will invalidate
+	 * the entire beacon.
+	 */
+	for (i = 0; i < TXWI_DESC_SIZE; i += sizeof(__le32))
+		rt2800_register_write(rt2x00dev, beacon_base + i, 0);
+}
+
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 const struct rt2x00debug rt2800_rt2x00debug = {
 	.owner	= THIS_MODULE,
@@ -502,15 +766,28 @@ static void rt2800_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
 
 	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
 
-	rt2800_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
-			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-			   (crypto->cmd == SET_KEY) * crypto->cipher);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-			   (crypto->cmd == SET_KEY) * crypto->bssidx);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-	rt2800_register_write(rt2x00dev, offset, reg);
+	if (crypto->cmd == SET_KEY) {
+		rt2800_register_read(rt2x00dev, offset, &reg);
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+				   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+		/*
+		 * Both the cipher as the BSS Idx numbers are split in a main
+		 * value of 3 bits, and a extended field for adding one additional
+		 * bit to the value.
+		 */
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
+				   (crypto->cipher & 0x7));
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER_EXT,
+				   (crypto->cipher & 0x8) >> 3);
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+				   (crypto->bssidx & 0x7));
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT,
+				   (crypto->bssidx & 0x8) >> 3);
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+		rt2800_register_write(rt2x00dev, offset, reg);
+	} else {
+		rt2800_register_write(rt2x00dev, offset, 0);
+	}
 
 	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
 
@@ -668,19 +945,14 @@ EXPORT_SYMBOL_GPL(rt2800_config_filter);
 void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
 			struct rt2x00intf_conf *conf, const unsigned int flags)
 {
-	unsigned int beacon_base;
 	u32 reg;
 
 	if (flags & CONFIG_UPDATE_TYPE) {
 		/*
 		 * Clear current synchronisation setup.
-		 * For the Beacon base registers we only need to clear
-		 * the first byte since that byte contains the VALID and OWNER
-		 * bits which (when set to 0) will invalidate the entire beacon.
 		 */
-		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-		rt2800_register_write(rt2x00dev, beacon_base, 0);
-
+		rt2800_clear_beacon(rt2x00dev,
+				    HW_BEACON_OFFSET(intf->beacon->entry_idx));
 		/*
 		 * Enable synchronisation.
 		 */
@@ -688,8 +960,18 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
 		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
 		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
 		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE,
-				   (conf->sync == TSF_SYNC_BEACON));
+				   (conf->sync == TSF_SYNC_ADHOC ||
+				    conf->sync == TSF_SYNC_AP_NONE));
 		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+		/*
+		 * Enable pre tbtt interrupt for beaconing modes
+		 */
+		rt2800_register_read(rt2x00dev, INT_TIMER_EN, &reg);
+		rt2x00_set_field32(&reg, INT_TIMER_EN_PRE_TBTT_TIMER,
+				   (conf->sync == TSF_SYNC_AP_NONE));
+		rt2800_register_write(rt2x00dev, INT_TIMER_EN, reg);
+
 	}
 
 	if (flags & CONFIG_UPDATE_MAC) {
@@ -703,8 +985,8 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
 
 	if (flags & CONFIG_UPDATE_BSSID) {
 		reg = le32_to_cpu(conf->bssid[1]);
-		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
-		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 3);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 7);
 		conf->bssid[1] = cpu_to_le32(reg);
 
 		rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
@@ -762,14 +1044,12 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
 	switch ((int)ant->tx) {
 	case 1:
 		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-		if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
-			rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
 		break;
 	case 2:
 		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
 		break;
 	case 3:
-		/* Do nothing */
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
 		break;
 	}
 
@@ -1016,66 +1296,115 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 }
 
 static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
-				  const int txpower)
+				  const int max_txpower)
 {
+	u8 txpower;
+	u8 max_value = (u8)max_txpower;
+	u16 eeprom;
+	int i;
 	u32 reg;
-	u32 value = TXPOWER_G_TO_DEV(txpower);
 	u8 r1;
+	u32 offset;
 
+	/*
+	 * set to normal tx power mode: +/- 0dBm
+	 */
 	rt2800_bbp_read(rt2x00dev, 1, &r1);
-	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+	rt2x00_set_field8(&r1, BBP1_TX_POWER, 0);
 	rt2800_bbp_write(rt2x00dev, 1, r1);
 
-	rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
-	rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-
-	rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
-	rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-
-	rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
-	rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-
-	rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
-	rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-
-	rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
-	rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+	/*
+	 * The eeprom contains the tx power values for each rate. These
+	 * values map to 100% tx power. Each 16bit word contains four tx
+	 * power values and the order is the same as used in the TX_PWR_CFG
+	 * registers.
+	 */
+	offset = TX_PWR_CFG_0;
+
+	for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) {
+		/* just to be safe */
+		if (offset > TX_PWR_CFG_4)
+			break;
+
+		rt2800_register_read(rt2x00dev, offset, &reg);
+
+		/* read the next four txpower values */
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i,
+				   &eeprom);
+
+		/* TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
+		 * TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12,
+		 * TX_PWR_CFG_4: unknown */
+		txpower = rt2x00_get_field16(eeprom,
+					     EEPROM_TXPOWER_BYRATE_RATE0);
+		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE0,
+				   min(txpower, max_value));
+
+		/* TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
+		 * TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13,
+		 * TX_PWR_CFG_4: unknown */
+		txpower = rt2x00_get_field16(eeprom,
+					     EEPROM_TXPOWER_BYRATE_RATE1);
+		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE1,
+				   min(txpower, max_value));
+
+		/* TX_PWR_CFG_0: 55MBS, TX_PWR_CFG_1: 48MBS,
+		 * TX_PWR_CFG_2: MCS6,  TX_PWR_CFG_3: MCS14,
+		 * TX_PWR_CFG_4: unknown */
+		txpower = rt2x00_get_field16(eeprom,
+					     EEPROM_TXPOWER_BYRATE_RATE2);
+		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE2,
+				   min(txpower, max_value));
+
+		/* TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
+		 * TX_PWR_CFG_2: MCS7,  TX_PWR_CFG_3: MCS15,
+		 * TX_PWR_CFG_4: unknown */
+		txpower = rt2x00_get_field16(eeprom,
+					     EEPROM_TXPOWER_BYRATE_RATE3);
+		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE3,
+				   min(txpower, max_value));
+
+		/* read the next four txpower values */
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i + 1,
+				   &eeprom);
+
+		/* TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
+		 * TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown,
+		 * TX_PWR_CFG_4: unknown */
+		txpower = rt2x00_get_field16(eeprom,
+					     EEPROM_TXPOWER_BYRATE_RATE0);
+		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE4,
+				   min(txpower, max_value));
+
+		/* TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
+		 * TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown,
+		 * TX_PWR_CFG_4: unknown */
+		txpower = rt2x00_get_field16(eeprom,
+					     EEPROM_TXPOWER_BYRATE_RATE1);
+		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE5,
+				   min(txpower, max_value));
+
+		/* TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
+		 * TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown,
+		 * TX_PWR_CFG_4: unknown */
+		txpower = rt2x00_get_field16(eeprom,
+					     EEPROM_TXPOWER_BYRATE_RATE2);
+		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE6,
+				   min(txpower, max_value));
+
+		/* TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
+		 * TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown,
+		 * TX_PWR_CFG_4: unknown */
+		txpower = rt2x00_get_field16(eeprom,
+					     EEPROM_TXPOWER_BYRATE_RATE3);
+		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE7,
+				   min(txpower, max_value));
+
+		rt2800_register_write(rt2x00dev, offset, reg);
+
+		/* next TX_PWR_CFG register */
+		offset += 4;
+	}
 }
 
 static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
@@ -1212,6 +1541,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	u32 reg;
 	u16 eeprom;
 	unsigned int i;
+	int ret;
 
 	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
@@ -1221,59 +1551,9 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
 	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 
-	if (rt2x00_is_usb(rt2x00dev)) {
-		/*
-		 * Wait until BBP and RF are ready.
-		 */
-		for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-			rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
-			if (reg && reg != ~0)
-				break;
-			msleep(1);
-		}
-
-		if (i == REGISTER_BUSY_COUNT) {
-			ERROR(rt2x00dev, "Unstable hardware.\n");
-			return -EBUSY;
-		}
-
-		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
-		rt2800_register_write(rt2x00dev, PBF_SYS_CTRL,
-				      reg & ~0x00002000);
-	} else if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) {
-		/*
-		 * Reset DMA indexes
-		 */
-		rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
-		rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, 1);
-		rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, 1);
-		rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, 1);
-		rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, 1);
-		rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX4, 1);
-		rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX5, 1);
-		rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
-		rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
-
-		rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
-		rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
-
-		rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-	}
-
-	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-
-	if (rt2x00_is_usb(rt2x00dev)) {
-		rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
-#if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE)
-		rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
-					    USB_MODE_RESET, REGISTER_TIMEOUT);
-#endif
-	}
-
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+	ret = rt2800_drv_init_registers(rt2x00dev);
+	if (ret)
+		return ret;
 
 	rt2800_register_read(rt2x00dev, BCN_OFFSET0, &reg);
 	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
@@ -1295,7 +1575,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
 
 	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 1600);
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
@@ -1328,7 +1608,6 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		} else {
 			rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
 		}
-		rt2800_register_write(rt2x00dev, TX_SW_CFG2, reg);
 	} else if (rt2x00_rt(rt2x00dev, RT3070)) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
 
@@ -1339,6 +1618,10 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 			rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
 			rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
 		}
+	} else if (rt2800_is_305x_soc(rt2x00dev)) {
+		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000001f);
 	} else {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
@@ -1546,23 +1829,20 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	/*
 	 * Clear all beacons
-	 * For the Beacon base registers we only need to clear
-	 * the first byte since that byte contains the VALID and OWNER
-	 * bits which (when set to 0) will invalidate the entire beacon.
-	 */
-	rt2800_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
-	rt2800_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
-	rt2800_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
-	rt2800_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
-	rt2800_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
-	rt2800_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
-	rt2800_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
-	rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
+	 */
+	rt2800_clear_beacon(rt2x00dev, HW_BEACON_BASE0);
+	rt2800_clear_beacon(rt2x00dev, HW_BEACON_BASE1);
+	rt2800_clear_beacon(rt2x00dev, HW_BEACON_BASE2);
+	rt2800_clear_beacon(rt2x00dev, HW_BEACON_BASE3);
+	rt2800_clear_beacon(rt2x00dev, HW_BEACON_BASE4);
+	rt2800_clear_beacon(rt2x00dev, HW_BEACON_BASE5);
+	rt2800_clear_beacon(rt2x00dev, HW_BEACON_BASE6);
+	rt2800_clear_beacon(rt2x00dev, HW_BEACON_BASE7);
 
 	if (rt2x00_is_usb(rt2x00dev)) {
-		rt2800_register_read(rt2x00dev, USB_CYC_CFG, &reg);
-		rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
-		rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg);
+		rt2800_register_read(rt2x00dev, US_CYC_CNT, &reg);
+		rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 30);
+		rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
 	}
 
 	rt2800_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
@@ -1617,6 +1897,13 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_read(rt2x00dev, TX_STA_CNT1, &reg);
 	rt2800_register_read(rt2x00dev, TX_STA_CNT2, &reg);
 
+	/*
+	 * Setup leadtime for pre tbtt interrupt to 6ms
+	 */
+	rt2800_register_read(rt2x00dev, INT_TIMER_CFG, &reg);
+	rt2x00_set_field32(&reg, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4);
+	rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(rt2800_init_registers);
@@ -1706,8 +1993,7 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	rt2800_bbp_write(rt2x00dev, 82, 0x62);
 	rt2800_bbp_write(rt2x00dev, 83, 0x6a);
 
-	if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D) ||
-	    rt2x00_rt_rev(rt2x00dev, RT2870, REV_RT2870D))
+	if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D))
 		rt2800_bbp_write(rt2x00dev, 84, 0x19);
 	else
 		rt2800_bbp_write(rt2x00dev, 84, 0x99);
@@ -2013,8 +2299,7 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
 	    rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
 	    rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-		if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
+		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
 			rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
 	}
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom);
@@ -2147,7 +2432,6 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
 		EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
 	} else if (rt2x00_rt(rt2x00dev, RT2860) ||
-		   rt2x00_rt(rt2x00dev, RT2870) ||
 		   rt2x00_rt(rt2x00dev, RT2872)) {
 		/*
 		 * There is a max of 2 RX streams for RT28x0 series
@@ -2169,6 +2453,8 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
 		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
 		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_ANT_DIVERSITY, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_DAC_TEST, 0);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
 		EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
 	}
@@ -2176,6 +2462,10 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
 	if ((word & 0x00ff) == 0x00ff) {
 		rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
+		EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
+	}
+	if ((word & 0xff00) == 0xff00) {
 		rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
 				   LED_MODE_TXRX_ACTIVITY);
 		rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
@@ -2183,7 +2473,7 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
-		EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
+		EEPROM(rt2x00dev, "Led Mode: 0x%04x\n", word);
 	}
 
 	/*
@@ -2251,7 +2541,6 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 			value, rt2x00_get_field32(reg, MAC_CSR0_REVISION));
 
 	if (!rt2x00_rt(rt2x00dev, RT2860) &&
-	    !rt2x00_rt(rt2x00dev, RT2870) &&
 	    !rt2x00_rt(rt2x00dev, RT2872) &&
 	    !rt2x00_rt(rt2x00dev, RT2883) &&
 	    !rt2x00_rt(rt2x00dev, RT3070) &&
@@ -2484,13 +2773,26 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM |
 	    IEEE80211_HW_SUPPORTS_PS |
-	    IEEE80211_HW_PS_NULLFUNC_STACK;
+	    IEEE80211_HW_PS_NULLFUNC_STACK |
+	    IEEE80211_HW_AMPDU_AGGREGATION;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
 				rt2x00_eeprom_addr(rt2x00dev,
 						   EEPROM_MAC_ADDR_0));
 
+	/*
+	 * As rt2800 has a global fallback table we cannot specify
+	 * more then one tx rate per frame but since the hw will
+	 * try several rates (based on the fallback table) we should
+	 * still initialize max_rates to the maximum number of rates
+	 * we are going to try. Otherwise mac80211 will truncate our
+	 * reported tx rates and the rc algortihm will end up with
+	 * incorrect data.
+	 */
+	rt2x00dev->hw->max_rates = 7;
+	rt2x00dev->hw->max_rate_tries = 1;
+
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
 
 	/*
@@ -2528,16 +2830,19 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	else
 		spec->ht.ht_supported = false;
 
-	/*
-	 * Don't set IEEE80211_HT_CAP_SUP_WIDTH_20_40 for now as it causes
-	 * reception problems with HT40 capable 11n APs
-	 */
 	spec->ht.cap =
+	    IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
 	    IEEE80211_HT_CAP_GRN_FLD |
 	    IEEE80211_HT_CAP_SGI_20 |
-	    IEEE80211_HT_CAP_SGI_40 |
-	    IEEE80211_HT_CAP_TX_STBC |
-	    IEEE80211_HT_CAP_RX_STBC;
+	    IEEE80211_HT_CAP_SGI_40;
+
+	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) >= 2)
+		spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC;
+
+	spec->ht.cap |=
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) <<
+		IEEE80211_HT_CAP_RX_STBC_SHIFT;
+
 	spec->ht.ampdu_factor = 3;
 	spec->ht.ampdu_density = 4;
 	spec->ht.mcs.tx_params =
@@ -2591,8 +2896,8 @@ EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
 /*
  * IEEE80211 stack callback functions.
  */
-static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
-				u32 *iv32, u16 *iv16)
+void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
+			 u16 *iv16)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct mac_iveiv_entry iveiv_entry;
@@ -2605,8 +2910,9 @@ static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
 	memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16));
 	memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32));
 }
+EXPORT_SYMBOL_GPL(rt2800_get_tkip_seq);
 
-static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	u32 reg;
@@ -2642,9 +2948,10 @@ static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rt2800_set_rts_threshold);
 
-static int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
-			  const struct ieee80211_tx_queue_params *params)
+int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+		   const struct ieee80211_tx_queue_params *params)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct data_queue *queue;
@@ -2709,8 +3016,9 @@ static int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rt2800_conf_tx);
 
-static u64 rt2800_get_tsf(struct ieee80211_hw *hw)
+u64 rt2800_get_tsf(struct ieee80211_hw *hw)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	u64 tsf;
@@ -2723,23 +3031,37 @@ static u64 rt2800_get_tsf(struct ieee80211_hw *hw)
 
 	return tsf;
 }
+EXPORT_SYMBOL_GPL(rt2800_get_tsf);
 
-const struct ieee80211_ops rt2800_mac80211_ops = {
-	.tx			= rt2x00mac_tx,
-	.start			= rt2x00mac_start,
-	.stop			= rt2x00mac_stop,
-	.add_interface		= rt2x00mac_add_interface,
-	.remove_interface	= rt2x00mac_remove_interface,
-	.config			= rt2x00mac_config,
-	.configure_filter	= rt2x00mac_configure_filter,
-	.set_tim		= rt2x00mac_set_tim,
-	.set_key		= rt2x00mac_set_key,
-	.get_stats		= rt2x00mac_get_stats,
-	.get_tkip_seq		= rt2800_get_tkip_seq,
-	.set_rts_threshold	= rt2800_set_rts_threshold,
-	.bss_info_changed	= rt2x00mac_bss_info_changed,
-	.conf_tx		= rt2800_conf_tx,
-	.get_tsf		= rt2800_get_tsf,
-	.rfkill_poll		= rt2x00mac_rfkill_poll,
-};
-EXPORT_SYMBOL_GPL(rt2800_mac80211_ops);
+int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			enum ieee80211_ampdu_mlme_action action,
+			struct ieee80211_sta *sta, u16 tid, u16 *ssn)
+{
+	int ret = 0;
+
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+	case IEEE80211_AMPDU_RX_STOP:
+		/* we don't support RX aggregation yet */
+		ret = -ENOTSUPP;
+		break;
+	case IEEE80211_AMPDU_TX_START:
+		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_STOP:
+		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		break;
+	default:
+		WARNING((struct rt2x00_dev *)hw->priv, "Unknown AMPDU action\n");
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rt2800_ampdu_action);
+
+MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2800 library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 94de999e2290..091641e3c5e2 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -40,13 +40,17 @@ struct rt2800_ops {
 	int (*regbusy_read)(struct rt2x00_dev *rt2x00dev,
 			    const unsigned int offset,
 			    const struct rt2x00_field32 field, u32 *reg);
+
+	int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev,
+				  const u8 *data, const size_t len);
+	int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
 };
 
 static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
 					const unsigned int offset,
 					u32 *value)
 {
-	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
 
 	rt2800ops->register_read(rt2x00dev, offset, value);
 }
@@ -55,7 +59,7 @@ static inline void rt2800_register_read_lock(struct rt2x00_dev *rt2x00dev,
 					     const unsigned int offset,
 					     u32 *value)
 {
-	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
 
 	rt2800ops->register_read_lock(rt2x00dev, offset, value);
 }
@@ -64,7 +68,7 @@ static inline void rt2800_register_write(struct rt2x00_dev *rt2x00dev,
 					 const unsigned int offset,
 					 u32 value)
 {
-	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
 
 	rt2800ops->register_write(rt2x00dev, offset, value);
 }
@@ -73,7 +77,7 @@ static inline void rt2800_register_write_lock(struct rt2x00_dev *rt2x00dev,
 					      const unsigned int offset,
 					      u32 value)
 {
-	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
 
 	rt2800ops->register_write_lock(rt2x00dev, offset, value);
 }
@@ -82,7 +86,7 @@ static inline void rt2800_register_multiread(struct rt2x00_dev *rt2x00dev,
 					     const unsigned int offset,
 					     void *value, const u32 length)
 {
-	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
 
 	rt2800ops->register_multiread(rt2x00dev, offset, value, length);
 }
@@ -92,7 +96,7 @@ static inline void rt2800_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 					      const void *value,
 					      const u32 length)
 {
-	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
 
 	rt2800ops->register_multiwrite(rt2x00dev, offset, value, length);
 }
@@ -102,17 +106,39 @@ static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
 				      const struct rt2x00_field32 field,
 				      u32 *reg)
 {
-	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
 
 	return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
 }
 
+static inline int rt2800_drv_write_firmware(struct rt2x00_dev *rt2x00dev,
+					    const u8 *data, const size_t len)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
+
+	return rt2800ops->drv_write_firmware(rt2x00dev, data, len);
+}
+
+static inline int rt2800_drv_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
+
+	return rt2800ops->drv_init_registers(rt2x00dev);
+}
+
 void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 			const u8 command, const u8 token,
 			const u8 arg0, const u8 arg1);
 
-void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc);
-void rt2800_process_rxwi(struct sk_buff *skb, struct rxdone_entry_desc *txdesc);
+int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
+			  const u8 *data, const size_t len);
+int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
+			 const u8 *data, const size_t len);
+
+void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc);
+void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc);
+
+void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
 
 extern const struct rt2x00debug rt2800_rt2x00debug;
 
@@ -148,6 +174,14 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev);
 int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev);
 int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev);
 
-extern const struct ieee80211_ops rt2800_mac80211_ops;
+void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
+			 u16 *iv16);
+int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value);
+int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+		   const struct ieee80211_tx_queue_params *params);
+u64 rt2800_get_tsf(struct ieee80211_hw *hw);
+int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			enum ieee80211_ampdu_mlme_action action,
+			struct ieee80211_sta *sta, u16 tid, u16 *ssn);
 
 #endif /* RT2800LIB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b2f23272c3aa..39b3846fa340 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -31,7 +31,6 @@
 	Supported chipsets: RT2800E & RT2800ED.
  */
 
-#include <linux/crc-ccitt.h>
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/init.h>
@@ -51,7 +50,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 1;
+static int modparam_nohwcrypt = 0;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
@@ -139,8 +138,18 @@ static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
 	eeprom.data = rt2x00dev;
 	eeprom.register_read = rt2800pci_eepromregister_read;
 	eeprom.register_write = rt2800pci_eepromregister_write;
-	eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
-	    PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
+	switch (rt2x00_get_field32(reg, E2PROM_CSR_TYPE))
+	{
+	case 0:
+		eeprom.width = PCI_EEPROM_WIDTH_93C46;
+		break;
+	case 1:
+		eeprom.width = PCI_EEPROM_WIDTH_93C66;
+		break;
+	default:
+		eeprom.width = PCI_EEPROM_WIDTH_93C86;
+		break;
+	}
 	eeprom.reg_data_in = 0;
 	eeprom.reg_data_out = 0;
 	eeprom.reg_data_clock = 0;
@@ -182,82 +191,14 @@ static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 	return FIRMWARE_RT2860;
 }
 
-static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev,
+static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev,
 				    const u8 *data, const size_t len)
 {
-	u16 fw_crc;
-	u16 crc;
-
-	/*
-	 * Only support 8kb firmware files.
-	 */
-	if (len != 8192)
-		return FW_BAD_LENGTH;
-
-	/*
-	 * The last 2 bytes in the firmware array are the crc checksum itself,
-	 * this means that we should never pass those 2 bytes to the crc
-	 * algorithm.
-	 */
-	fw_crc = (data[len - 2] << 8 | data[len - 1]);
-
-	/*
-	 * Use the crc ccitt algorithm.
-	 * This will return the same value as the legacy driver which
-	 * used bit ordering reversion on the both the firmware bytes
-	 * before input input as well as on the final output.
-	 * Obviously using crc ccitt directly is much more efficient.
-	 */
-	crc = crc_ccitt(~0, data, len - 2);
-
-	/*
-	 * There is a small difference between the crc-itu-t + bitrev and
-	 * the crc-ccitt crc calculation. In the latter method the 2 bytes
-	 * will be swapped, use swab16 to convert the crc to the correct
-	 * value.
-	 */
-	crc = swab16(crc);
-
-	return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
-}
-
-static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
-				   const u8 *data, const size_t len)
-{
-	unsigned int i;
 	u32 reg;
 
-	/*
-	 * Wait for stable hardware.
-	 */
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
-		if (reg && reg != ~0)
-			break;
-		msleep(1);
-	}
-
-	if (i == REGISTER_BUSY_COUNT) {
-		ERROR(rt2x00dev, "Unstable hardware.\n");
-		return -EBUSY;
-	}
-
-	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
 	rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
 
 	/*
-	 * Disable DMA, will be reenabled later when enabling
-	 * the radio.
-	 */
-	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
-	/*
 	 * enable Host program ram write selection
 	 */
 	reg = 0;
@@ -268,34 +209,11 @@ static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
 	 * Write firmware to device.
 	 */
 	rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
-				      data, len);
+				   data, len);
 
 	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
 	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
 
-	/*
-	 * Wait for device to stabilize.
-	 */
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
-		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
-			break;
-		msleep(1);
-	}
-
-	if (i == REGISTER_BUSY_COUNT) {
-		ERROR(rt2x00dev, "PBF system register not ready.\n");
-		return -EBUSY;
-	}
-
-	/*
-	 * Disable interrupts
-	 */
-	rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
-
-	/*
-	 * Initialize BBP R/W access agent
-	 */
 	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
 	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 
@@ -412,7 +330,8 @@ static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
 static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 				 enum dev_state state)
 {
-	int mask = (state == STATE_RADIO_IRQ_ON);
+	int mask = (state == STATE_RADIO_IRQ_ON) ||
+		   (state == STATE_RADIO_IRQ_ON_ISR);
 	u32 reg;
 
 	/*
@@ -446,6 +365,38 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 	rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
 }
 
+static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	/*
+	 * Reset DMA indexes
+	 */
+	rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX4, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX5, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
+	rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
+
+	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	return 0;
+}
+
 static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -465,7 +416,7 @@ static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Send signal to firmware during boot time.
 	 */
-	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
 
 	/*
 	 * Enable RX.
@@ -589,7 +540,9 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2800pci_toggle_rx(rt2x00dev, state);
 		break;
 	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
+	case STATE_RADIO_IRQ_OFF_ISR:
 		rt2800pci_toggle_irq(rt2x00dev, state);
 		break;
 	case STATE_DEEP_SLEEP:
@@ -613,18 +566,12 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 /*
  * TX descriptor initialization
  */
-static int rt2800pci_write_tx_data(struct queue_entry* entry,
-				   struct txentry_desc *txdesc)
+static void rt2800pci_write_tx_data(struct queue_entry* entry,
+				    struct txentry_desc *txdesc)
 {
-	int ret;
-
-	ret = rt2x00pci_write_tx_data(entry, txdesc);
-	if (ret)
-		return ret;
+	__le32 *txwi = (__le32 *) entry->skb->data;
 
-	rt2800_write_txwi(entry->skb, txdesc);
-
-	return 0;
+	rt2800_write_txwi(txwi, txdesc);
 }
 
 
@@ -684,49 +631,6 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
-static void rt2800pci_write_beacon(struct queue_entry *entry,
-				   struct txentry_desc *txdesc)
-{
-	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	unsigned int beacon_base;
-	u32 reg;
-
-	/*
-	 * Disable beaconing while we are reloading the beacon data,
-	 * otherwise we might be sending out invalid data.
-	 */
-	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
-	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-
-	/*
-	 * Add the TXWI for the beacon to the skb.
-	 */
-	rt2800_write_txwi(entry->skb, txdesc);
-	skb_push(entry->skb, TXWI_DESC_SIZE);
-
-	/*
-	 * Write entire beacon with TXWI to register.
-	 */
-	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2800_register_multiwrite(rt2x00dev, beacon_base,
-				   entry->skb->data, entry->skb->len);
-
-	/*
-	 * Enable beaconing again.
-	 */
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
-	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-
-	/*
-	 * Clean up beacon skb.
-	 */
-	dev_kfree_skb_any(entry->skb);
-	entry->skb = NULL;
-}
-
 static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 				    const enum data_queue_qid queue_idx)
 {
@@ -812,7 +716,7 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 	/*
 	 * Process the RXWI structure that is at the start of the buffer.
 	 */
-	rt2800_process_rxwi(entry->skb, rxdesc);
+	rt2800_process_rxwi(entry, rxdesc);
 
 	/*
 	 * Set RX IDX in register to inform hardware that we have handled
@@ -832,29 +736,24 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 	struct txdone_entry_desc txdesc;
 	u32 word;
 	u32 reg;
-	u32 old_reg;
 	int wcid, ack, pid, tx_wcid, tx_ack, tx_pid;
 	u16 mcs, real_mcs;
+	int i;
 
 	/*
-	 * During each loop we will compare the freshly read
-	 * TX_STA_FIFO register value with the value read from
-	 * the previous loop. If the 2 values are equal then
-	 * we should stop processing because the chance it
-	 * quite big that the device has been unplugged and
-	 * we risk going into an endless loop.
+	 * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
+	 * at most X times and also stop processing once the TX_STA_FIFO_VALID
+	 * flag is not set anymore.
+	 *
+	 * The legacy drivers use X=TX_RING_SIZE but state in a comment
+	 * that the TX_STA_FIFO stack has a size of 16. We stick to our
+	 * tx ring size for now.
 	 */
-	old_reg = 0;
-
-	while (1) {
+	for (i = 0; i < TX_ENTRIES; i++) {
 		rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
 		if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
 			break;
 
-		if (old_reg == reg)
-			break;
-		old_reg = reg;
-
 		wcid    = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
 		ack     = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
 		pid     = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
@@ -880,8 +779,7 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 
 		/* Check if we got a match by looking at WCID/ACK/PID
 		 * fields */
-		txwi = (__le32 *)(entry->skb->data -
-				  rt2x00dev->ops->extra_tx_headroom);
+		txwi = (__le32 *) entry->skb->data;
 
 		rt2x00_desc_read(txwi, 1, &word);
 		tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
@@ -923,8 +821,12 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 			txdesc.retry = 7;
 		}
 
-		__set_bit(TXDONE_FALLBACK, &txdesc.flags);
-
+		/*
+		 * the frame was retried at least once
+		 * -> hw used fallback rates
+		 */
+		if (txdesc.retry)
+			__set_bit(TXDONE_FALLBACK, &txdesc.flags);
 
 		rt2x00lib_txdone(entry, &txdesc);
 	}
@@ -938,6 +840,48 @@ static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev)
 	rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
 }
 
+static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance)
+{
+	struct rt2x00_dev *rt2x00dev = dev_instance;
+	u32 reg = rt2x00dev->irqvalue[0];
+
+	/*
+	 * 1 - Pre TBTT interrupt.
+	 */
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
+		rt2x00lib_pretbtt(rt2x00dev);
+
+	/*
+	 * 2 - Beacondone interrupt.
+	 */
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
+		rt2x00lib_beacondone(rt2x00dev);
+
+	/*
+	 * 3 - Rx ring done interrupt.
+	 */
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
+		rt2x00pci_rxdone(rt2x00dev);
+
+	/*
+	 * 4 - Tx done interrupt.
+	 */
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
+		rt2800pci_txdone(rt2x00dev);
+
+	/*
+	 * 5 - Auto wakeup interrupt.
+	 */
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
+		rt2800pci_wakeup(rt2x00dev);
+
+	/* Enable interrupts again. */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+					      STATE_RADIO_IRQ_ON_ISR);
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
 {
 	struct rt2x00_dev *rt2x00dev = dev_instance;
@@ -953,19 +897,15 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
 	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return IRQ_HANDLED;
 
-	/*
-	 * 1 - Rx ring done interrupt.
-	 */
-	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
-		rt2x00pci_rxdone(rt2x00dev);
+	/* Store irqvalue for use in the interrupt thread. */
+	rt2x00dev->irqvalue[0] = reg;
 
-	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
-		rt2800pci_txdone(rt2x00dev);
+	/* Disable interrupts, will be enabled again in the interrupt thread. */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+					      STATE_RADIO_IRQ_OFF_ISR);
 
-	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
-		rt2800pci_wakeup(rt2x00dev);
 
-	return IRQ_HANDLED;
+	return IRQ_WAKE_THREAD;
 }
 
 /*
@@ -986,24 +926,10 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 	return rt2800_validate_eeprom(rt2x00dev);
 }
 
-static const struct rt2800_ops rt2800pci_rt2800_ops = {
-	.register_read		= rt2x00pci_register_read,
-	.register_read_lock	= rt2x00pci_register_read, /* same for PCI */
-	.register_write		= rt2x00pci_register_write,
-	.register_write_lock	= rt2x00pci_register_write, /* same for PCI */
-
-	.register_multiread	= rt2x00pci_register_multiread,
-	.register_multiwrite	= rt2x00pci_register_multiwrite,
-
-	.regbusy_read		= rt2x00pci_regbusy_read,
-};
-
 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
 
-	rt2x00dev->priv = (void *)&rt2800pci_rt2800_ops;
-
 	/*
 	 * Allocate eeprom data.
 	 */
@@ -1030,6 +956,12 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
 
 	/*
+	 * This device has a pre tbtt interrupt and thus fetches
+	 * a new beacon directly prior to transmission.
+	 */
+	__set_bit(DRIVER_SUPPORT_PRE_TBTT_INTERRUPT, &rt2x00dev->flags);
+
+	/*
 	 * This device requires firmware.
 	 */
 	if (!rt2x00_is_soc(rt2x00dev))
@@ -1038,6 +970,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
 	if (!modparam_nohwcrypt)
 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+	__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -1047,12 +980,46 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	return 0;
 }
 
+static const struct ieee80211_ops rt2800pci_mac80211_ops = {
+	.tx			= rt2x00mac_tx,
+	.start			= rt2x00mac_start,
+	.stop			= rt2x00mac_stop,
+	.add_interface		= rt2x00mac_add_interface,
+	.remove_interface	= rt2x00mac_remove_interface,
+	.config			= rt2x00mac_config,
+	.configure_filter	= rt2x00mac_configure_filter,
+	.set_key		= rt2x00mac_set_key,
+	.sw_scan_start		= rt2x00mac_sw_scan_start,
+	.sw_scan_complete	= rt2x00mac_sw_scan_complete,
+	.get_stats		= rt2x00mac_get_stats,
+	.get_tkip_seq		= rt2800_get_tkip_seq,
+	.set_rts_threshold	= rt2800_set_rts_threshold,
+	.bss_info_changed	= rt2x00mac_bss_info_changed,
+	.conf_tx		= rt2800_conf_tx,
+	.get_tsf		= rt2800_get_tsf,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
+	.ampdu_action		= rt2800_ampdu_action,
+};
+
+static const struct rt2800_ops rt2800pci_rt2800_ops = {
+	.register_read		= rt2x00pci_register_read,
+	.register_read_lock	= rt2x00pci_register_read, /* same for PCI */
+	.register_write		= rt2x00pci_register_write,
+	.register_write_lock	= rt2x00pci_register_write, /* same for PCI */
+	.register_multiread	= rt2x00pci_register_multiread,
+	.register_multiwrite	= rt2x00pci_register_multiwrite,
+	.regbusy_read		= rt2x00pci_regbusy_read,
+	.drv_write_firmware	= rt2800pci_write_firmware,
+	.drv_init_registers	= rt2800pci_init_registers,
+};
+
 static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.irq_handler		= rt2800pci_interrupt,
+	.irq_handler_thread	= rt2800pci_interrupt_thread,
 	.probe_hw		= rt2800pci_probe_hw,
 	.get_firmware_name	= rt2800pci_get_firmware_name,
-	.check_firmware		= rt2800pci_check_firmware,
-	.load_firmware		= rt2800pci_load_firmware,
+	.check_firmware		= rt2800_check_firmware,
+	.load_firmware		= rt2800_load_firmware,
 	.initialize		= rt2x00pci_initialize,
 	.uninitialize		= rt2x00pci_uninitialize,
 	.get_entry_state	= rt2800pci_get_entry_state,
@@ -1064,7 +1031,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.link_tuner		= rt2800_link_tuner,
 	.write_tx_desc		= rt2800pci_write_tx_desc,
 	.write_tx_data		= rt2800pci_write_tx_data,
-	.write_beacon		= rt2800pci_write_beacon,
+	.write_beacon		= rt2800_write_beacon,
 	.kick_tx_queue		= rt2800pci_kick_tx_queue,
 	.kill_tx_queue		= rt2800pci_kill_tx_queue,
 	.fill_rxdone		= rt2800pci_fill_rxdone,
@@ -1110,7 +1077,8 @@ static const struct rt2x00_ops rt2800pci_ops = {
 	.tx			= &rt2800pci_queue_tx,
 	.bcn			= &rt2800pci_queue_bcn,
 	.lib			= &rt2800pci_rt2x00_ops,
-	.hw			= &rt2800_mac80211_ops,
+	.drv			= &rt2800pci_rt2800_ops,
+	.hw			= &rt2800pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 	.debugfs		= &rt2800_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h
index afc8e7da27cb..5a8dda9b5b5a 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.h
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -35,25 +35,6 @@
 #define RT2800PCI_H
 
 /*
- * PCI registers.
- */
-
-/*
- * E2PROM_CSR: EEPROM control register.
- * RELOAD: Write 1 to reload eeprom content.
- * TYPE: 0: 93c46, 1:93c66.
- * LOAD_STATUS: 1:loading, 0:done.
- */
-#define E2PROM_CSR			0x0004
-#define E2PROM_CSR_DATA_CLOCK		FIELD32(0x00000001)
-#define E2PROM_CSR_CHIP_SELECT		FIELD32(0x00000002)
-#define E2PROM_CSR_DATA_IN		FIELD32(0x00000004)
-#define E2PROM_CSR_DATA_OUT		FIELD32(0x00000008)
-#define E2PROM_CSR_TYPE			FIELD32(0x00000030)
-#define E2PROM_CSR_LOAD_STATUS		FIELD32(0x00000040)
-#define E2PROM_CSR_RELOAD		FIELD32(0x00000080)
-
-/*
  * Queue register offset macros
  */
 #define TX_QUEUE_REG_OFFSET		0x10
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 0f8b84b7224c..5a2dfe87c6b6 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -28,7 +28,6 @@
 	Supported chipsets: RT2800U.
  */
 
-#include <linux/crc-ccitt.h>
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/init.h>
@@ -45,7 +44,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 1;
+static int modparam_nohwcrypt = 0;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
@@ -57,84 +56,10 @@ static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 	return FIRMWARE_RT2870;
 }
 
-static bool rt2800usb_check_crc(const u8 *data, const size_t len)
-{
-	u16 fw_crc;
-	u16 crc;
-
-	/*
-	 * The last 2 bytes in the firmware array are the crc checksum itself,
-	 * this means that we should never pass those 2 bytes to the crc
-	 * algorithm.
-	 */
-	fw_crc = (data[len - 2] << 8 | data[len - 1]);
-
-	/*
-	 * Use the crc ccitt algorithm.
-	 * This will return the same value as the legacy driver which
-	 * used bit ordering reversion on the both the firmware bytes
-	 * before input input as well as on the final output.
-	 * Obviously using crc ccitt directly is much more efficient.
-	 */
-	crc = crc_ccitt(~0, data, len - 2);
-
-	/*
-	 * There is a small difference between the crc-itu-t + bitrev and
-	 * the crc-ccitt crc calculation. In the latter method the 2 bytes
-	 * will be swapped, use swab16 to convert the crc to the correct
-	 * value.
-	 */
-	crc = swab16(crc);
-
-	return fw_crc == crc;
-}
-
-static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
+static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 				    const u8 *data, const size_t len)
 {
-	size_t offset = 0;
-
-	/*
-	 * Firmware files:
-	 * There are 2 variations of the rt2870 firmware.
-	 * a) size: 4kb
-	 * b) size: 8kb
-	 * Note that (b) contains 2 separate firmware blobs of 4k
-	 * within the file. The first blob is the same firmware as (a),
-	 * but the second blob is for the additional chipsets.
-	 */
-	if (len != 4096 && len != 8192)
-		return FW_BAD_LENGTH;
-
-	/*
-	 * Check if we need the upper 4kb firmware data or not.
-	 */
-	if ((len == 4096) &&
-	    !rt2x00_rt(rt2x00dev, RT2860) &&
-	    !rt2x00_rt(rt2x00dev, RT2872) &&
-	    !rt2x00_rt(rt2x00dev, RT3070))
-		return FW_BAD_VERSION;
-
-	/*
-	 * 8kb firmware files must be checked as if it were
-	 * 2 separate firmware files.
-	 */
-	while (offset < len) {
-		if (!rt2800usb_check_crc(data + offset, 4096))
-			return FW_BAD_CRC;
-
-		offset += 4096;
-	}
-
-	return FW_OK;
-}
-
-static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
-				   const u8 *data, const size_t len)
-{
-	unsigned int i;
 	int status;
-	u32 reg;
 	u32 offset;
 	u32 length;
 
@@ -152,28 +77,10 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	}
 
 	/*
-	 * Wait for stable hardware.
-	 */
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
-		if (reg && reg != ~0)
-			break;
-		msleep(1);
-	}
-
-	if (i == REGISTER_BUSY_COUNT) {
-		ERROR(rt2x00dev, "Unstable hardware.\n");
-		return -EBUSY;
-	}
-
-	/*
 	 * Write firmware to device.
 	 */
-	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-					    USB_VENDOR_REQUEST_OUT,
-					    FIRMWARE_IMAGE_BASE,
-					    data + offset, length,
-					    REGISTER_TIMEOUT32(length));
+	rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+				   data + offset, length);
 
 	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 	rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
@@ -196,7 +103,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Send signal to firmware during boot time.
 	 */
-	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
 
 	if (rt2x00_rt(rt2x00dev, RT3070) ||
 	    rt2x00_rt(rt2x00dev, RT3071) ||
@@ -206,28 +113,6 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 		udelay(10);
 	}
 
-	/*
-	 * Wait for device to stabilize.
-	 */
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
-		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
-			break;
-		msleep(1);
-	}
-
-	if (i == REGISTER_BUSY_COUNT) {
-		ERROR(rt2x00dev, "PBF system register not ready.\n");
-		return -EBUSY;
-	}
-
-	/*
-	 * Initialize firmware.
-	 */
-	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-	msleep(1);
-
 	return 0;
 }
 
@@ -246,6 +131,44 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
 	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 }
 
+static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	int i;
+
+	/*
+	 * Wait until BBP and RF are ready.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
+		if (reg && reg != ~0)
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "Unstable hardware.\n");
+		return -EBUSY;
+	}
+
+	rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
+
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
+
+	rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
+				    USB_MODE_RESET, REGISTER_TIMEOUT);
+
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	return 0;
+}
+
 static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -371,7 +294,9 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2800usb_toggle_rx(rt2x00dev, state);
 		break;
 	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
+	case STATE_RADIO_IRQ_OFF_ISR:
 		/* No support, but no error either */
 		break;
 	case STATE_DEEP_SLEEP:
@@ -395,25 +320,29 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 /*
  * TX descriptor initialization
  */
+static void rt2800usb_write_tx_data(struct queue_entry* entry,
+				    struct txentry_desc *txdesc)
+{
+	__le32 *txwi = (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
+
+	rt2800_write_txwi(txwi, txdesc);
+}
+
+
 static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 				    struct sk_buff *skb,
 				    struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	__le32 *txi = (__le32 *)(skb->data - TXWI_DESC_SIZE - TXINFO_DESC_SIZE);
+	__le32 *txi = (__le32 *) skb->data;
 	u32 word;
 
 	/*
-	 * Initialize TXWI descriptor
-	 */
-	rt2800_write_txwi(skb, txdesc);
-
-	/*
 	 * Initialize TXINFO descriptor
 	 */
 	rt2x00_desc_read(txi, 0, &word);
 	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
-			   skb->len + TXWI_DESC_SIZE);
+			   skb->len - TXINFO_DESC_SIZE);
 	rt2x00_set_field32(&word, TXINFO_W0_WIV,
 			   !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
 	rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
@@ -426,6 +355,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Register descriptor details in skb frame descriptor.
 	 */
+	skbdesc->flags |= SKBDESC_DESC_IN_SKB;
 	skbdesc->desc = txi;
 	skbdesc->desc_len = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
 }
@@ -433,51 +363,6 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 /*
  * TX data initialization
  */
-static void rt2800usb_write_beacon(struct queue_entry *entry,
-				   struct txentry_desc *txdesc)
-{
-	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	unsigned int beacon_base;
-	u32 reg;
-
-	/*
-	 * Disable beaconing while we are reloading the beacon data,
-	 * otherwise we might be sending out invalid data.
-	 */
-	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
-	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-
-	/*
-	 * Add the TXWI for the beacon to the skb.
-	 */
-	rt2800_write_txwi(entry->skb, txdesc);
-	skb_push(entry->skb, TXWI_DESC_SIZE);
-
-	/*
-	 * Write entire beacon with descriptor to register.
-	 */
-	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-					    USB_VENDOR_REQUEST_OUT, beacon_base,
-					    entry->skb->data, entry->skb->len,
-					    REGISTER_TIMEOUT32(entry->skb->len));
-
-	/*
-	 * Enable beaconing again.
-	 */
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
-	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-
-	/*
-	 * Clean up the beacon skb.
-	 */
-	dev_kfree_skb(entry->skb);
-	entry->skb = NULL;
-}
-
 static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
 {
 	int length;
@@ -568,7 +453,7 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 	/*
 	 * Process the RXWI structure.
 	 */
-	rt2800_process_rxwi(entry->skb, rxdesc);
+	rt2800_process_rxwi(entry, rxdesc);
 }
 
 /*
@@ -585,24 +470,10 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 	return rt2800_validate_eeprom(rt2x00dev);
 }
 
-static const struct rt2800_ops rt2800usb_rt2800_ops = {
-	.register_read		= rt2x00usb_register_read,
-	.register_read_lock	= rt2x00usb_register_read_lock,
-	.register_write		= rt2x00usb_register_write,
-	.register_write_lock	= rt2x00usb_register_write_lock,
-
-	.register_multiread	= rt2x00usb_register_multiread,
-	.register_multiwrite	= rt2x00usb_register_multiwrite,
-
-	.regbusy_read		= rt2x00usb_regbusy_read,
-};
-
 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
 
-	rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops;
-
 	/*
 	 * Allocate eeprom data.
 	 */
@@ -635,6 +506,8 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
 	if (!modparam_nohwcrypt)
 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+	__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
+	__set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -644,11 +517,45 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	return 0;
 }
 
+static const struct ieee80211_ops rt2800usb_mac80211_ops = {
+	.tx			= rt2x00mac_tx,
+	.start			= rt2x00mac_start,
+	.stop			= rt2x00mac_stop,
+	.add_interface		= rt2x00mac_add_interface,
+	.remove_interface	= rt2x00mac_remove_interface,
+	.config			= rt2x00mac_config,
+	.configure_filter	= rt2x00mac_configure_filter,
+	.set_tim		= rt2x00mac_set_tim,
+	.set_key		= rt2x00mac_set_key,
+	.sw_scan_start		= rt2x00mac_sw_scan_start,
+	.sw_scan_complete	= rt2x00mac_sw_scan_complete,
+	.get_stats		= rt2x00mac_get_stats,
+	.get_tkip_seq		= rt2800_get_tkip_seq,
+	.set_rts_threshold	= rt2800_set_rts_threshold,
+	.bss_info_changed	= rt2x00mac_bss_info_changed,
+	.conf_tx		= rt2800_conf_tx,
+	.get_tsf		= rt2800_get_tsf,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
+	.ampdu_action		= rt2800_ampdu_action,
+};
+
+static const struct rt2800_ops rt2800usb_rt2800_ops = {
+	.register_read		= rt2x00usb_register_read,
+	.register_read_lock	= rt2x00usb_register_read_lock,
+	.register_write		= rt2x00usb_register_write,
+	.register_write_lock	= rt2x00usb_register_write_lock,
+	.register_multiread	= rt2x00usb_register_multiread,
+	.register_multiwrite	= rt2x00usb_register_multiwrite,
+	.regbusy_read		= rt2x00usb_regbusy_read,
+	.drv_write_firmware	= rt2800usb_write_firmware,
+	.drv_init_registers	= rt2800usb_init_registers,
+};
+
 static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.probe_hw		= rt2800usb_probe_hw,
 	.get_firmware_name	= rt2800usb_get_firmware_name,
-	.check_firmware		= rt2800usb_check_firmware,
-	.load_firmware		= rt2800usb_load_firmware,
+	.check_firmware		= rt2800_check_firmware,
+	.load_firmware		= rt2800_load_firmware,
 	.initialize		= rt2x00usb_initialize,
 	.uninitialize		= rt2x00usb_uninitialize,
 	.clear_entry		= rt2x00usb_clear_entry,
@@ -657,9 +564,10 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.link_stats		= rt2800_link_stats,
 	.reset_tuner		= rt2800_reset_tuner,
 	.link_tuner		= rt2800_link_tuner,
+	.watchdog		= rt2x00usb_watchdog,
 	.write_tx_desc		= rt2800usb_write_tx_desc,
-	.write_tx_data		= rt2x00usb_write_tx_data,
-	.write_beacon		= rt2800usb_write_beacon,
+	.write_tx_data		= rt2800usb_write_tx_data,
+	.write_beacon		= rt2800_write_beacon,
 	.get_tx_data_len	= rt2800usb_get_tx_data_len,
 	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
 	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
@@ -706,7 +614,8 @@ static const struct rt2x00_ops rt2800usb_ops = {
 	.tx			= &rt2800usb_queue_tx,
 	.bcn			= &rt2800usb_queue_bcn,
 	.lib			= &rt2800usb_rt2x00_ops,
-	.hw			= &rt2800_mac80211_ops,
+	.drv			= &rt2800usb_rt2800_ops,
+	.hw			= &rt2800usb_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 	.debugfs		= &rt2800_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
index 2bca6a71a7f5..0722badccf86 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -32,43 +32,6 @@
 #define RT2800USB_H
 
 /*
- * USB registers.
- */
-
-/*
- * USB_DMA_CFG
- * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
- * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
- * PHY_CLEAR: phy watch dog enable.
- * TX_CLEAR: Clear USB DMA TX path.
- * TXOP_HALT: Halt TXOP count down when TX buffer is full.
- * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
- * RX_BULK_EN: Enable USB DMA Rx.
- * TX_BULK_EN: Enable USB DMA Tx.
- * EP_OUT_VALID: OUT endpoint data valid.
- * RX_BUSY: USB DMA RX FSM busy.
- * TX_BUSY: USB DMA TX FSM busy.
- */
-#define USB_DMA_CFG			0x02a0
-#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT	FIELD32(0x000000ff)
-#define USB_DMA_CFG_RX_BULK_AGG_LIMIT	FIELD32(0x0000ff00)
-#define USB_DMA_CFG_PHY_CLEAR		FIELD32(0x00010000)
-#define USB_DMA_CFG_TX_CLEAR		FIELD32(0x00080000)
-#define USB_DMA_CFG_TXOP_HALT		FIELD32(0x00100000)
-#define USB_DMA_CFG_RX_BULK_AGG_EN	FIELD32(0x00200000)
-#define USB_DMA_CFG_RX_BULK_EN		FIELD32(0x00400000)
-#define USB_DMA_CFG_TX_BULK_EN		FIELD32(0x00800000)
-#define USB_DMA_CFG_EP_OUT_VALID	FIELD32(0x3f000000)
-#define USB_DMA_CFG_RX_BUSY		FIELD32(0x40000000)
-#define USB_DMA_CFG_TX_BUSY		FIELD32(0x80000000)
-
-/*
- * USB_CYC_CFG
- */
-#define USB_CYC_CFG			0x02a4
-#define USB_CYC_CFG_CLOCK_CYCLE		FIELD32(0x000000ff)
-
-/*
  * 8051 firmware image.
  */
 #define FIRMWARE_RT2870			"rt2870.bin"
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 6c1ff4c15c84..c21af38cc5af 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -39,6 +39,7 @@
 #include <net/mac80211.h>
 
 #include "rt2x00debug.h"
+#include "rt2x00dump.h"
 #include "rt2x00leds.h"
 #include "rt2x00reg.h"
 #include "rt2x00queue.h"
@@ -159,6 +160,7 @@ struct avg_val {
 
 enum rt2x00_chip_intf {
 	RT2X00_CHIP_INTF_PCI,
+	RT2X00_CHIP_INTF_PCIE,
 	RT2X00_CHIP_INTF_USB,
 	RT2X00_CHIP_INTF_SOC,
 };
@@ -175,8 +177,7 @@ struct rt2x00_chip {
 #define RT2570		0x2570
 #define RT2661		0x2661
 #define RT2573		0x2573
-#define RT2860		0x2860	/* 2.4GHz PCI/CB */
-#define RT2870		0x2870
+#define RT2860		0x2860	/* 2.4GHz */
 #define RT2872		0x2872	/* WSOC */
 #define RT2883		0x2883	/* WSOC */
 #define RT3070		0x3070
@@ -331,6 +332,11 @@ struct link {
 	 * Work structure for scheduling periodic link tuning.
 	 */
 	struct delayed_work work;
+
+	/*
+	 * Work structure for scheduling periodic watchdog monitoring.
+	 */
+	struct delayed_work watchdog_work;
 };
 
 /*
@@ -509,6 +515,11 @@ struct rt2x00lib_ops {
 	irq_handler_t irq_handler;
 
 	/*
+	 * Threaded Interrupt handlers.
+	 */
+	irq_handler_t irq_handler_thread;
+
+	/*
 	 * Device init handlers.
 	 */
 	int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
@@ -542,6 +553,7 @@ struct rt2x00lib_ops {
 			     struct link_qual *qual);
 	void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
 			    struct link_qual *qual, const u32 count);
+	void (*watchdog) (struct rt2x00_dev *rt2x00dev);
 
 	/*
 	 * TX control handlers
@@ -549,8 +561,8 @@ struct rt2x00lib_ops {
 	void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev,
 			       struct sk_buff *skb,
 			       struct txentry_desc *txdesc);
-	int (*write_tx_data) (struct queue_entry *entry,
-			      struct txentry_desc *txdesc);
+	void (*write_tx_data) (struct queue_entry *entry,
+			       struct txentry_desc *txdesc);
 	void (*write_beacon) (struct queue_entry *entry,
 			      struct txentry_desc *txdesc);
 	int (*get_tx_data_len) (struct queue_entry *entry);
@@ -609,6 +621,7 @@ struct rt2x00_ops {
 	const struct data_queue_desc *bcn;
 	const struct data_queue_desc *atim;
 	const struct rt2x00lib_ops *lib;
+	const void *drv;
 	const struct ieee80211_ops *hw;
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 	const struct rt2x00debug *debugfs;
@@ -627,6 +640,7 @@ enum rt2x00_flags {
 	DEVICE_STATE_INITIALIZED,
 	DEVICE_STATE_STARTED,
 	DEVICE_STATE_ENABLED_RADIO,
+	DEVICE_STATE_SCANNING,
 
 	/*
 	 * Driver requirements
@@ -645,6 +659,9 @@ enum rt2x00_flags {
 	CONFIG_SUPPORT_HW_CRYPTO,
 	DRIVER_SUPPORT_CONTROL_FILTERS,
 	DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
+	DRIVER_SUPPORT_PRE_TBTT_INTERRUPT,
+	DRIVER_SUPPORT_LINK_TUNING,
+	DRIVER_SUPPORT_WATCHDOG,
 
 	/*
 	 * Driver configuration
@@ -654,7 +671,6 @@ enum rt2x00_flags {
 	CONFIG_EXTERNAL_LNA_A,
 	CONFIG_EXTERNAL_LNA_BG,
 	CONFIG_DOUBLE_ANTENNA,
-	CONFIG_DISABLE_LINK_TUNING,
 	CONFIG_CHANNEL_HT40,
 };
 
@@ -862,9 +878,10 @@ struct rt2x00_dev {
 	const struct firmware *fw;
 
 	/*
-	 * Driver specific data.
+	 * Interrupt values, stored between interrupt service routine
+	 * and interrupt thread routine.
 	 */
-	void *priv;
+	u32 irqvalue[2];
 };
 
 /*
@@ -978,7 +995,13 @@ static inline bool rt2x00_intf(struct rt2x00_dev *rt2x00dev,
 
 static inline bool rt2x00_is_pci(struct rt2x00_dev *rt2x00dev)
 {
-	return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
+	return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI) ||
+	       rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE);
+}
+
+static inline bool rt2x00_is_pcie(struct rt2x00_dev *rt2x00dev)
+{
+	return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE);
 }
 
 static inline bool rt2x00_is_usb(struct rt2x00_dev *rt2x00dev)
@@ -999,6 +1022,13 @@ static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev)
 void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 
 /**
+ * rt2x00queue_unmap_skb - Unmap a skb from DMA.
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @skb: The skb to unmap.
+ */
+void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
+
+/**
  * rt2x00queue_get_queue - Convert queue index to queue pointer
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  * @queue: rt2x00 queue index (see &enum data_queue_qid).
@@ -1015,9 +1045,30 @@ struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
 					  enum queue_index index);
 
 /*
+ * Debugfs handlers.
+ */
+/**
+ * rt2x00debug_dump_frame - Dump a frame to userspace through debugfs.
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @type: The type of frame that is being dumped.
+ * @skb: The skb containing the frame to be dumped.
+ */
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
+			    enum rt2x00_dump_type type, struct sk_buff *skb);
+#else
+static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
+					  enum rt2x00_dump_type type,
+					  struct sk_buff *skb)
+{
+}
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+/*
  * Interrupt context handlers.
  */
 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
+void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev);
 void rt2x00lib_txdone(struct queue_entry *entry,
 		      struct txdone_entry_desc *txdesc);
 void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
@@ -1047,6 +1098,8 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 #else
 #define rt2x00mac_set_key	NULL
 #endif /* CONFIG_RT2X00_LIB_CRYPTO */
+void rt2x00mac_sw_scan_start(struct ieee80211_hw *hw);
+void rt2x00mac_sw_scan_complete(struct ieee80211_hw *hw);
 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 			struct ieee80211_low_level_stats *stats);
 void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 098315a271ca..953dc4f2c6af 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -41,10 +41,12 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
 
 	switch (type) {
 	case NL80211_IFTYPE_ADHOC:
+		conf.sync = TSF_SYNC_ADHOC;
+		break;
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_WDS:
-		conf.sync = TSF_SYNC_BEACON;
+		conf.sync = TSF_SYNC_AP_NONE;
 		break;
 	case NL80211_IFTYPE_STATION:
 		conf.sync = TSF_SYNC_INFRA;
@@ -170,23 +172,27 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 		      unsigned int ieee80211_flags)
 {
 	struct rt2x00lib_conf libconf;
+	u16 hw_value;
 
 	memset(&libconf, 0, sizeof(libconf));
 
 	libconf.conf = conf;
 
 	if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) {
-		if (conf_is_ht40(conf))
+		if (conf_is_ht40(conf)) {
 			__set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
-		else
+			hw_value = rt2x00ht_center_channel(rt2x00dev, conf);
+		} else {
 			__clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
+			hw_value = conf->channel->hw_value;
+		}
 
 		memcpy(&libconf.rf,
-		       &rt2x00dev->spec.channels[conf->channel->hw_value],
+		       &rt2x00dev->spec.channels[hw_value],
 		       sizeof(libconf.rf));
 
 		memcpy(&libconf.channel,
-		       &rt2x00dev->spec.channels_info[conf->channel->hw_value],
+		       &rt2x00dev->spec.channels_info[hw_value],
 		       sizeof(libconf.channel));
 	}
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index e9fe93fd8042..b0498e7e7aae 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -211,6 +211,7 @@ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
 	if (!test_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags))
 		skb_queue_purge(&intf->frame_dump_skbqueue);
 }
+EXPORT_SYMBOL_GPL(rt2x00debug_dump_frame);
 
 static int rt2x00debug_file_open(struct inode *inode, struct file *file)
 {
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index f20d3eeeea7f..585e8166f22a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -70,6 +70,11 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
 
 	/*
+	 * Start watchdog monitoring.
+	 */
+	rt2x00link_start_watchdog(rt2x00dev);
+
+	/*
 	 * Start the TX queues.
 	 */
 	ieee80211_wake_queues(rt2x00dev->hw);
@@ -89,6 +94,11 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2x00queue_stop_queues(rt2x00dev);
 
 	/*
+	 * Stop watchdog monitoring.
+	 */
+	rt2x00link_stop_watchdog(rt2x00dev);
+
+	/*
 	 * Disable RX.
 	 */
 	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
@@ -168,10 +178,32 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work)
 /*
  * Interrupt context handlers.
  */
-static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
-				      struct ieee80211_vif *vif)
+static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac,
+				     struct ieee80211_vif *vif)
 {
-	struct rt2x00_intf *intf = vif_to_intf(vif);
+	struct rt2x00_dev *rt2x00dev = data;
+	struct sk_buff *skb;
+
+	/*
+	 * Only AP mode interfaces do broad- and multicast buffering
+	 */
+	if (vif->type != NL80211_IFTYPE_AP)
+		return;
+
+	/*
+	 * Send out buffered broad- and multicast frames
+	 */
+	skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+	while (skb) {
+		rt2x00mac_tx(rt2x00dev->hw, skb);
+		skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+	}
+}
+
+static void rt2x00lib_beaconupdate_iter(void *data, u8 *mac,
+					struct ieee80211_vif *vif)
+{
+	struct rt2x00_dev *rt2x00dev = data;
 
 	if (vif->type != NL80211_IFTYPE_AP &&
 	    vif->type != NL80211_IFTYPE_ADHOC &&
@@ -179,9 +211,7 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
 	    vif->type != NL80211_IFTYPE_WDS)
 		return;
 
-	spin_lock(&intf->lock);
-	intf->delayed_flags |= DELAYED_UPDATE_BEACON;
-	spin_unlock(&intf->lock);
+	rt2x00queue_update_beacon(rt2x00dev, vif, true);
 }
 
 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
@@ -189,14 +219,37 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
 	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
 
-	ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
-						   rt2x00lib_beacondone_iter,
-						   rt2x00dev);
+	/* send buffered bc/mc frames out for every bssid */
+	ieee80211_iterate_active_interfaces(rt2x00dev->hw,
+					    rt2x00lib_bc_buffer_iter,
+					    rt2x00dev);
+	/*
+	 * Devices with pre tbtt interrupt don't need to update the beacon
+	 * here as they will fetch the next beacon directly prior to
+	 * transmission.
+	 */
+	if (test_bit(DRIVER_SUPPORT_PRE_TBTT_INTERRUPT, &rt2x00dev->flags))
+		return;
 
-	ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->intf_work);
+	/* fetch next beacon */
+	ieee80211_iterate_active_interfaces(rt2x00dev->hw,
+					    rt2x00lib_beaconupdate_iter,
+					    rt2x00dev);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
 
+void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev)
+{
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return;
+
+	/* fetch next beacon */
+	ieee80211_iterate_active_interfaces(rt2x00dev->hw,
+					    rt2x00lib_beaconupdate_iter,
+					    rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt);
+
 void rt2x00lib_txdone(struct queue_entry *entry,
 		      struct txdone_entry_desc *txdesc)
 {
@@ -216,6 +269,16 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
 
 	/*
+	 * Remove the extra tx headroom from the skb.
+	 */
+	skb_pull(entry->skb, rt2x00dev->ops->extra_tx_headroom);
+
+	/*
+	 * Signal that the TX descriptor is no longer in the skb.
+	 */
+	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
+
+	/*
 	 * Remove L2 padding which was added during
 	 */
 	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
@@ -224,7 +287,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	/*
 	 * If the IV/EIV data was stripped from the frame before it was
 	 * passed to the hardware, we should now reinsert it again because
-	 * mac80211 will expect the the same data to be present it the
+	 * mac80211 will expect the same data to be present it the
 	 * frame as it was passed to us.
 	 */
 	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
@@ -241,8 +304,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 */
 	success =
 	    test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
-	    test_bit(TXDONE_UNKNOWN, &txdesc->flags) ||
-	    test_bit(TXDONE_FALLBACK, &txdesc->flags);
+	    test_bit(TXDONE_UNKNOWN, &txdesc->flags);
 
 	/*
 	 * Update TX statistics.
@@ -264,11 +326,22 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	/*
 	 * Frame was send with retries, hardware tried
 	 * different rates to send out the frame, at each
-	 * retry it lowered the rate 1 step.
+	 * retry it lowered the rate 1 step except when the
+	 * lowest rate was used.
 	 */
 	for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
 		tx_info->status.rates[i].idx = rate_idx - i;
 		tx_info->status.rates[i].flags = rate_flags;
+
+		if (rate_idx - i == 0) {
+			/*
+			 * The lowest rate (index 0) was used until the
+			 * number of max retries was reached.
+			 */
+			tx_info->status.rates[i].count = retry_rates - i;
+			i++;
+			break;
+		}
 		tx_info->status.rates[i].count = 1;
 	}
 	if (i < (IEEE80211_TX_MAX_RATES - 1))
@@ -281,6 +354,21 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 			rt2x00dev->low_level_stats.dot11ACKFailureCount++;
 	}
 
+	/*
+	 * Every single frame has it's own tx status, hence report
+	 * every frame as ampdu of size 1.
+	 *
+	 * TODO: if we can find out how many frames were aggregated
+	 * by the hw we could provide the real ampdu_len to mac80211
+	 * which would allow the rc algorithm to better decide on
+	 * which rates are suitable.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+		tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
+		tx_info->status.ampdu_len = 1;
+		tx_info->status.ampdu_ack_len = success ? 1 : 0;
+	}
+
 	if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
 		if (success)
 			rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
@@ -295,9 +383,17 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 * send the status report back.
 	 */
 	if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
-		ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
+		/*
+		 * Only PCI and SOC devices process the tx status in process
+		 * context. Hence use ieee80211_tx_status for PCI and SOC
+		 * devices and stick to ieee80211_tx_status_irqsafe for USB.
+		 */
+		if (rt2x00_is_usb(rt2x00dev))
+			ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
+		else
+			ieee80211_tx_status(rt2x00dev->hw, entry->skb);
 	else
-		dev_kfree_skb_irq(entry->skb);
+		dev_kfree_skb_any(entry->skb);
 
 	/*
 	 * Make this entry available for reuse.
@@ -444,7 +540,16 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	 */
 	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
 	memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status));
-	ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
+
+	/*
+	 * Currently only PCI and SOC devices handle rx interrupts in process
+	 * context. Hence, use ieee80211_rx_irqsafe for USB and ieee80211_rx_ni
+	 * for PCI and SOC devices.
+	 */
+	if (rt2x00_is_usb(rt2x00dev))
+		ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
+	else
+		ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
 
 	/*
 	 * Replace the skb with the freshly allocated one.
diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h
index ed303b423e41..5d6e0b83151f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dump.h
+++ b/drivers/net/wireless/rt2x00/rt2x00dump.h
@@ -20,7 +20,12 @@
 
 /*
 	Module: rt2x00dump
-	Abstract: Data structures for the rt2x00debug & userspace.
+	Abstract:
+		Data structures for the rt2x00debug & userspace.
+
+		The declarations in this file can be used by both rt2x00
+		and userspace and therefore should be kept together in
+		this file.
  */
 
 #ifndef RT2X00DUMP_H
@@ -111,7 +116,7 @@ struct rt2x00dump_hdr {
 
 	__le16 chip_rt;
 	__le16 chip_rf;
-	__le32 chip_rev;
+	__le16 chip_rev;
 
 	__le16 type;
 	__u8 queue_index;
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
index 5a407602ce3e..c004cd3a8847 100644
--- a/drivers/net/wireless/rt2x00/rt2x00ht.c
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -44,11 +44,22 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 		txdesc->mpdu_density = 0;
 
 	txdesc->ba_size = 7;	/* FIXME: What value is needed? */
-	txdesc->stbc = 0;	/* FIXME: What value is needed? */
 
-	txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs);
-	if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
-		txdesc->mcs |= 0x08;
+	txdesc->stbc =
+	    (tx_info->flags & IEEE80211_TX_CTL_STBC) >> IEEE80211_TX_CTL_STBC_SHIFT;
+
+	/*
+	 * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the
+	 * mcs rate to be used
+	 */
+	if (txrate->flags & IEEE80211_TX_RC_MCS) {
+		txdesc->mcs = txrate->idx;
+	} else {
+		txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs);
+		if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+			txdesc->mcs |= 0x08;
+	}
+
 
 	/*
 	 * Convert flags
@@ -84,3 +95,31 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 	else
 		txdesc->txop = TXOP_HTTXOP;
 }
+
+u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev,
+			    struct ieee80211_conf *conf)
+{
+	struct hw_mode_spec *spec = &rt2x00dev->spec;
+	int center_channel;
+	u16 i;
+
+	/*
+	 * Initialize center channel to current channel.
+	 */
+	center_channel = spec->channels[conf->channel->hw_value].channel;
+
+	/*
+	 * Adjust center channel to HT40+ and HT40- operation.
+	 */
+	if (conf_is_ht40_plus(conf))
+		center_channel += 2;
+	else if (conf_is_ht40_minus(conf))
+		center_channel -= (center_channel == 14) ? 1 : 2;
+
+	for (i = 0; i < spec->num_channels; i++)
+		if (spec->channels[i].channel == center_channel)
+			return i;
+
+	WARN_ON(1);
+	return conf->channel->hw_value;
+}
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index be2e37fb4071..dc5c6574aaf4 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -27,11 +27,10 @@
 #ifndef RT2X00LIB_H
 #define RT2X00LIB_H
 
-#include "rt2x00dump.h"
-
 /*
  * Interval defines
  */
+#define WATCHDOG_INTERVAL	round_jiffies_relative(HZ)
 #define LINK_TUNE_INTERVAL	round_jiffies_relative(HZ)
 
 /*
@@ -107,13 +106,6 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
 					struct queue_entry *entry);
 
 /**
- * rt2x00queue_unmap_skb - Unmap a skb from DMA.
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @skb: The skb to unmap.
- */
-void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
-
-/**
  * rt2x00queue_free_skb - free a skb
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  * @skb: The skb to free.
@@ -266,11 +258,30 @@ void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev);
 void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
 
 /**
- * rt2x00link_register - Initialize link tuning functionality
+ * rt2x00link_start_watchdog - Start periodic watchdog monitoring
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ *
+ * This start the watchdog periodic work, this work will
+ *be executed periodically until &rt2x00link_stop_watchdog has
+ * been called.
+ */
+void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00link_stop_watchdog - Stop periodic watchdog monitoring
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  *
- * Initialize work structure and all link tuning related
- * parameters. This will not start the link tuning process itself.
+ * After this function completed the watchdog monitoring will not
+ * be running until &rt2x00link_start_watchdog is called.
+ */
+void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00link_register - Initialize link tuning & watchdog functionality
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ *
+ * Initialize work structure and all link tuning and watchdog related
+ * parameters. This will not start the periodic work itself.
  */
 void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
 
@@ -296,8 +307,6 @@ static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev)
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 void rt2x00debug_register(struct rt2x00_dev *rt2x00dev);
 void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
-void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
-			    enum rt2x00_dump_type type, struct sk_buff *skb);
 void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
 			       struct rxdone_entry_desc *rxdesc);
 #else
@@ -309,12 +318,6 @@ static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
 {
 }
 
-static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
-					  enum rt2x00_dump_type type,
-					  struct sk_buff *skb)
-{
-}
-
 static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
 					     struct rxdone_entry_desc *rxdesc)
 {
@@ -384,12 +387,21 @@ static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
 void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 				   struct txentry_desc *txdesc,
 				   const struct rt2x00_rate *hwrate);
+
+u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev,
+			    struct ieee80211_conf *conf);
 #else
 static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 						 struct txentry_desc *txdesc,
 						 const struct rt2x00_rate *hwrate)
 {
 }
+
+static inline u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev,
+					  struct ieee80211_conf *conf)
+{
+	return conf->channel->hw_value;
+}
 #endif /* CONFIG_RT2X00_LIB_HT */
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index 0efbf5a6c254..666cef3f8472 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -271,11 +271,20 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev)
 
 	/*
 	 * Link tuning should only be performed when
-	 * an active sta or master interface exists.
-	 * Single monitor mode interfaces should never have
-	 * work with link tuners.
+	 * an active sta interface exists. AP interfaces
+	 * don't need link tuning and monitor mode interfaces
+	 * should never have to work with link tuners.
 	 */
-	if (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count)
+	if (!rt2x00dev->intf_sta_count)
+		return;
+
+	/**
+	 * While scanning, link tuning is disabled. By default
+	 * the most sensitive settings will be used to make sure
+	 * that all beacons and probe responses will be recieved
+	 * during the scan.
+	 */
+	if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
 		return;
 
 	rt2x00link_reset_tuner(rt2x00dev, false);
@@ -293,6 +302,7 @@ void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev)
 void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna)
 {
 	struct link_qual *qual = &rt2x00dev->link.qual;
+	u8 vgc_level = qual->vgc_level_reg;
 
 	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
@@ -309,6 +319,13 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna)
 	memset(qual, 0, sizeof(*qual));
 
 	/*
+	 * Restore the VGC level as stored in the registers,
+	 * the driver can use this to determine if the register
+	 * must be updated during reset or not.
+	 */
+	qual->vgc_level_reg = vgc_level;
+
+	/*
 	 * Reset the link tuner.
 	 */
 	rt2x00dev->ops->lib->reset_tuner(rt2x00dev, qual);
@@ -338,7 +355,8 @@ static void rt2x00link_tuner(struct work_struct *work)
 	 * When the radio is shutting down we should
 	 * immediately cease all link tuning.
 	 */
-	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
+	    test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
 		return;
 
 	/*
@@ -359,10 +377,11 @@ static void rt2x00link_tuner(struct work_struct *work)
 		qual->rssi = link->avg_rssi.avg;
 
 	/*
-	 * Only perform the link tuning when Link tuning
-	 * has been enabled (This could have been disabled from the EEPROM).
+	 * Check if link tuning is supported by the hardware, some hardware
+	 * do not support link tuning at all, while other devices can disable
+	 * the feature from the EEPROM.
 	 */
-	if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags))
+	if (test_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags))
 		rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count);
 
 	/*
@@ -388,7 +407,45 @@ static void rt2x00link_tuner(struct work_struct *work)
 					     &link->work, LINK_TUNE_INTERVAL);
 }
 
+void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+	struct link *link = &rt2x00dev->link;
+
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+	    !test_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags))
+		return;
+
+	ieee80211_queue_delayed_work(rt2x00dev->hw,
+				     &link->watchdog_work, WATCHDOG_INTERVAL);
+}
+
+void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+	cancel_delayed_work_sync(&rt2x00dev->link.watchdog_work);
+}
+
+static void rt2x00link_watchdog(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, link.watchdog_work.work);
+	struct link *link = &rt2x00dev->link;
+
+	/*
+	 * When the radio is shutting down we should
+	 * immediately cease the watchdog monitoring.
+	 */
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return;
+
+	rt2x00dev->ops->lib->watchdog(rt2x00dev);
+
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		ieee80211_queue_delayed_work(rt2x00dev->hw,
+					     &link->watchdog_work, WATCHDOG_INTERVAL);
+}
+
 void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
 {
+	INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog);
 	INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner);
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index abbd857ec759..235e037e6509 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -273,16 +273,24 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	mutex_init(&intf->beacon_skb_mutex);
 	intf->beacon = entry;
 
-	if (vif->type == NL80211_IFTYPE_AP)
-		memcpy(&intf->bssid, vif->addr, ETH_ALEN);
-	memcpy(&intf->mac, vif->addr, ETH_ALEN);
-
 	/*
 	 * The MAC adddress must be configured after the device
 	 * has been initialized. Otherwise the device can reset
 	 * the MAC registers.
+	 * The BSSID address must only be configured in AP mode,
+	 * however we should not send an empty BSSID address for
+	 * STA interfaces at this time, since this can cause
+	 * invalid behavior in the device.
 	 */
-	rt2x00lib_config_intf(rt2x00dev, intf, vif->type, intf->mac, NULL);
+	memcpy(&intf->mac, vif->addr, ETH_ALEN);
+	if (vif->type == NL80211_IFTYPE_AP) {
+		memcpy(&intf->bssid, vif->addr, ETH_ALEN);
+		rt2x00lib_config_intf(rt2x00dev, intf, vif->type,
+				      intf->mac, intf->bssid);
+	} else {
+		rt2x00lib_config_intf(rt2x00dev, intf, vif->type,
+				      intf->mac, NULL);
+	}
 
 	/*
 	 * Some filters depend on the current working mode. We can force
@@ -346,9 +354,11 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
 	/*
 	 * Some configuration parameters (e.g. channel and antenna values) can
 	 * only be set when the radio is enabled, but do require the RX to
-	 * be off.
+	 * be off. During this period we should keep link tuning enabled,
+	 * if for any reason the link tuner must be reset, this will be
+	 * handled by rt2x00lib_config().
 	 */
-	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
 
 	/*
 	 * When we've just turned on the radio, we want to reprogram
@@ -366,7 +376,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
 	rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant);
 
 	/* Turn RX back on */
-	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
 
 	return 0;
 }
@@ -430,12 +440,36 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
 
+static void rt2x00mac_set_tim_iter(void *data, u8 *mac,
+				   struct ieee80211_vif *vif)
+{
+	struct rt2x00_intf *intf = vif_to_intf(vif);
+
+	if (vif->type != NL80211_IFTYPE_AP &&
+	    vif->type != NL80211_IFTYPE_ADHOC &&
+	    vif->type != NL80211_IFTYPE_MESH_POINT &&
+	    vif->type != NL80211_IFTYPE_WDS)
+		return;
+
+	spin_lock(&intf->lock);
+	intf->delayed_flags |= DELAYED_UPDATE_BEACON;
+	spin_unlock(&intf->lock);
+}
+
 int rt2x00mac_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
 		      bool set)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 
-	rt2x00lib_beacondone(rt2x00dev);
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return 0;
+
+	ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
+						   rt2x00mac_set_tim_iter,
+						   rt2x00dev);
+
+	/* queue work to upodate the beacon template */
+	ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->intf_work);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_set_tim);
@@ -539,6 +573,22 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 EXPORT_SYMBOL_GPL(rt2x00mac_set_key);
 #endif /* CONFIG_RT2X00_LIB_CRYPTO */
 
+void rt2x00mac_sw_scan_start(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	__set_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags);
+	rt2x00link_stop_tuner(rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_sw_scan_start);
+
+void rt2x00mac_sw_scan_complete(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	__clear_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags);
+	rt2x00link_start_tuner(rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_sw_scan_complete);
+
 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 			struct ieee80211_low_level_stats *stats)
 {
@@ -562,7 +612,6 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct rt2x00_intf *intf = vif_to_intf(vif);
-	int update_bssid = 0;
 
 	/*
 	 * mac80211 might be calling this function while we are trying
@@ -577,10 +626,8 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 	 * conf->bssid can be NULL if coming from the internal
 	 * beacon update routine.
 	 */
-	if (changes & BSS_CHANGED_BSSID) {
-		update_bssid = 1;
+	if (changes & BSS_CHANGED_BSSID)
 		memcpy(&intf->bssid, bss_conf->bssid, ETH_ALEN);
-	}
 
 	spin_unlock(&intf->lock);
 
@@ -592,7 +639,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 	 */
 	if (changes & BSS_CHANGED_BSSID)
 		rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
-				      update_bssid ? bss_conf->bssid : NULL);
+				      bss_conf->bssid);
 
 	/*
 	 * Update the beacon.
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index f71eee67f977..19b262e1ddbe 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -60,34 +60,6 @@ int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
 
-/*
- * TX data handlers.
- */
-int rt2x00pci_write_tx_data(struct queue_entry *entry,
-			    struct txentry_desc *txdesc)
-{
-	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-
-	/*
-	 * This should not happen, we already checked the entry
-	 * was ours. When the hardware disagrees there has been
-	 * a queue corruption!
-	 */
-	if (unlikely(rt2x00dev->ops->lib->get_entry_state(entry))) {
-		ERROR(rt2x00dev,
-		      "Corrupt queue %d, accessing entry which is not ours.\n"
-		      "Please file bug report to %s.\n",
-		      entry->queue->qid, DRV_PROJECT);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_write_tx_data);
-
-/*
- * TX/RX data handlers.
- */
 void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue = rt2x00dev->rx;
@@ -181,8 +153,10 @@ int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Register interrupt handler.
 	 */
-	status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler,
-			     IRQF_SHARED, rt2x00dev->name, rt2x00dev);
+	status = request_threaded_irq(rt2x00dev->irq,
+				      rt2x00dev->ops->lib->irq_handler,
+				      rt2x00dev->ops->lib->irq_handler_thread,
+				      IRQF_SHARED, rt2x00dev->name, rt2x00dev);
 	if (status) {
 		ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
 		      rt2x00dev->irq, status);
@@ -305,7 +279,10 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	rt2x00dev->irq = pci_dev->irq;
 	rt2x00dev->name = pci_name(pci_dev);
 
-	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
+	if (pci_dev->is_pcie)
+		rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE);
+	else
+		rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
 
 	retval = rt2x00pci_alloc_reg(rt2x00dev);
 	if (retval)
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index 51bcef3839ce..b854d62ff99b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -86,16 +86,6 @@ int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
 			   u32 *reg);
 
 /**
- * rt2x00pci_write_tx_data - Initialize data for TX operation
- * @entry: The entry where the frame is located
- *
- * This function will initialize the DMA and skb descriptor
- * to prepare the entry for the actual TX operation.
- */
-int rt2x00pci_write_tx_data(struct queue_entry *entry,
-			    struct txentry_desc *txdesc);
-
-/**
  * struct queue_entry_priv_pci: Per entry PCI specific information
  *
  * @desc: Pointer to device descriptor
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 20dbdd6fb904..a3401d301058 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -100,21 +100,8 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 
-	/*
-	 * If device has requested headroom, we should make sure that
-	 * is also mapped to the DMA so it can be used for transfering
-	 * additional descriptor information to the hardware.
-	 */
-	skb_push(skb, rt2x00dev->ops->extra_tx_headroom);
-
 	skbdesc->skb_dma =
 	    dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
-
-	/*
-	 * Restore data pointer to original location again.
-	 */
-	skb_pull(skb, rt2x00dev->ops->extra_tx_headroom);
-
 	skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
 }
 EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb);
@@ -130,16 +117,12 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 	}
 
 	if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) {
-		/*
-		 * Add headroom to the skb length, it has been removed
-		 * by the driver, but it was actually mapped to DMA.
-		 */
-		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
-				 skb->len + rt2x00dev->ops->extra_tx_headroom,
+		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len,
 				 DMA_TO_DEVICE);
 		skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
 	}
 }
+EXPORT_SYMBOL_GPL(rt2x00queue_unmap_skb);
 
 void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 {
@@ -370,13 +353,18 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	/*
 	 * Check if more fragments are pending
 	 */
-	if (ieee80211_has_morefrags(hdr->frame_control) ||
-	    (tx_info->flags & IEEE80211_TX_CTL_MORE_FRAMES)) {
+	if (ieee80211_has_morefrags(hdr->frame_control)) {
 		__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
 		__set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags);
 	}
 
 	/*
+	 * Check if more frames (!= fragments) are pending
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_MORE_FRAMES)
+		__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
+
+	/*
 	 * Beacons and probe responses require the tsf timestamp
 	 * to be inserted into the frame, except for a frame that has been injected
 	 * through a monitor interface. This latter is needed for testing a
@@ -416,12 +404,51 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
 }
 
+static int rt2x00queue_write_tx_data(struct queue_entry *entry,
+				     struct txentry_desc *txdesc)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+
+	/*
+	 * This should not happen, we already checked the entry
+	 * was ours. When the hardware disagrees there has been
+	 * a queue corruption!
+	 */
+	if (unlikely(rt2x00dev->ops->lib->get_entry_state &&
+		     rt2x00dev->ops->lib->get_entry_state(entry))) {
+		ERROR(rt2x00dev,
+		      "Corrupt queue %d, accessing entry which is not ours.\n"
+		      "Please file bug report to %s.\n",
+		      entry->queue->qid, DRV_PROJECT);
+		return -EINVAL;
+	}
+
+	/*
+	 * Add the requested extra tx headroom in front of the skb.
+	 */
+	skb_push(entry->skb, rt2x00dev->ops->extra_tx_headroom);
+	memset(entry->skb->data, 0, rt2x00dev->ops->extra_tx_headroom);
+
+	/*
+	 * Call the driver's write_tx_data function, if it exists.
+	 */
+	if (rt2x00dev->ops->lib->write_tx_data)
+		rt2x00dev->ops->lib->write_tx_data(entry, txdesc);
+
+	/*
+	 * Map the skb to DMA.
+	 */
+	if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
+		rt2x00queue_map_txskb(rt2x00dev, entry->skb);
+
+	return 0;
+}
+
 static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
 					    struct txentry_desc *txdesc)
 {
 	struct data_queue *queue = entry->queue;
 	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	enum rt2x00_dump_type dump_type;
 
 	rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry->skb, txdesc);
 
@@ -429,9 +456,7 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
 	 * All processing on the frame has been completed, this means
 	 * it is now ready to be dumped to userspace through debugfs.
 	 */
-	dump_type = (txdesc->queue == QID_BEACON) ?
-					DUMP_FRAME_BEACON : DUMP_FRAME_TX;
-	rt2x00debug_dump_frame(rt2x00dev, dump_type, entry->skb);
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb);
 }
 
 static void rt2x00queue_kick_tx_queue(struct queue_entry *entry,
@@ -530,16 +555,12 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 	 * call failed. Since we always return NETDEV_TX_OK to mac80211,
 	 * this frame will simply be dropped.
 	 */
-	if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry,
-							       &txdesc))) {
+	if (unlikely(rt2x00queue_write_tx_data(entry, &txdesc))) {
 		clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 		entry->skb = NULL;
 		return -EIO;
 	}
 
-	if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))
-		rt2x00queue_map_txskb(queue->rt2x00dev, skb);
-
 	set_bit(ENTRY_DATA_PENDING, &entry->flags);
 
 	rt2x00queue_index_inc(queue, Q_INDEX);
@@ -595,11 +616,6 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
 	skbdesc->entry = intf->beacon;
 
 	/*
-	 * Write TX descriptor into reserved room in front of the beacon.
-	 */
-	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
-
-	/*
 	 * Send beacon to hardware and enable beacon genaration..
 	 */
 	rt2x00dev->ops->lib->write_beacon(intf->beacon, &txdesc);
@@ -672,9 +688,11 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
 
 	if (index == Q_INDEX) {
 		queue->length++;
+		queue->last_index = jiffies;
 	} else if (index == Q_INDEX_DONE) {
 		queue->length--;
 		queue->count++;
+		queue->last_index_done = jiffies;
 	}
 
 	spin_unlock_irqrestore(&queue->lock, irqflags);
@@ -688,6 +706,8 @@ static void rt2x00queue_reset(struct data_queue *queue)
 
 	queue->count = 0;
 	queue->length = 0;
+	queue->last_index = jiffies;
+	queue->last_index_done = jiffies;
 	memset(queue->index, 0, sizeof(queue->index));
 
 	spin_unlock_irqrestore(&queue->lock, irqflags);
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index f79170849add..191e7775a9c0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -213,9 +213,16 @@ struct rxdone_entry_desc {
 /**
  * enum txdone_entry_desc_flags: Flags for &struct txdone_entry_desc
  *
+ * Every txdone report has to contain the basic result of the
+ * transmission, either &TXDONE_UNKNOWN, &TXDONE_SUCCESS or
+ * &TXDONE_FAILURE. The flag &TXDONE_FALLBACK can be used in
+ * conjunction with all of these flags but should only be set
+ * if retires > 0. The flag &TXDONE_EXCESSIVE_RETRY can only be used
+ * in conjunction with &TXDONE_FAILURE.
+ *
  * @TXDONE_UNKNOWN: Hardware could not determine success of transmission.
  * @TXDONE_SUCCESS: Frame was successfully send
- * @TXDONE_FALLBACK: Frame was successfully send using a fallback rate.
+ * @TXDONE_FALLBACK: Hardware used fallback rates for retries
  * @TXDONE_FAILURE: Frame was not successfully send
  * @TXDONE_EXCESSIVE_RETRY: In addition to &TXDONE_FAILURE, the
  *	frame transmission failed due to excessive retries.
@@ -439,6 +446,8 @@ struct data_queue {
 	enum data_queue_qid qid;
 
 	spinlock_t lock;
+	unsigned long last_index;
+	unsigned long last_index_done;
 	unsigned int count;
 	unsigned short limit;
 	unsigned short threshold;
@@ -592,6 +601,15 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
 }
 
 /**
+ * rt2x00queue_timeout - Check if a timeout occured for this queue
+ * @queue: Queue to check.
+ */
+static inline int rt2x00queue_timeout(struct data_queue *queue)
+{
+	return time_after(queue->last_index, queue->last_index_done + (HZ / 10));
+}
+
+/**
  * _rt2x00_desc_read - Read a word from the hardware descriptor.
  * @desc: Base descriptor address
  * @word: Word index from where the descriptor should be read.
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index b9fe94873ee0..cef94621cef7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -63,7 +63,8 @@ enum led_mode {
 enum tsf_sync {
 	TSF_SYNC_NONE = 0,
 	TSF_SYNC_INFRA = 1,
-	TSF_SYNC_BEACON = 2,
+	TSF_SYNC_ADHOC = 2,
+	TSF_SYNC_AP_NONE = 3,
 };
 
 /*
@@ -88,6 +89,8 @@ enum dev_state {
 	STATE_RADIO_RX_OFF_LINK,
 	STATE_RADIO_IRQ_ON,
 	STATE_RADIO_IRQ_OFF,
+	STATE_RADIO_IRQ_ON_ISR,
+	STATE_RADIO_IRQ_OFF_ISR,
 };
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index bd1546ba7ad2..ff3a36622d1b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -113,26 +113,6 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
 				  const u16 offset, void *buffer,
 				  const u16 buffer_length, const int timeout)
 {
-	int status;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
-						requesttype, offset, buffer,
-						buffer_length, timeout);
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return status;
-}
-EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
-
-int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
-					const u8 request, const u8 requesttype,
-					const u16 offset, const void *buffer,
-					const u16 buffer_length,
-					const int timeout)
-{
 	int status = 0;
 	unsigned char *tb;
 	u16 off, len, bsize;
@@ -157,7 +137,7 @@ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
 
 	return status;
 }
-EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
+EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
 
 int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
 			   const unsigned int offset,
@@ -216,48 +196,28 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 	rt2x00lib_txdone(entry, &txdesc);
 }
 
-int rt2x00usb_write_tx_data(struct queue_entry *entry,
-			    struct txentry_desc *txdesc)
+static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
 	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
 	u32 length;
 
-	/*
-	 * Add the descriptor in front of the skb.
-	 */
-	skb_push(entry->skb, entry->queue->desc_size);
-	memset(entry->skb->data, 0, entry->queue->desc_size);
-
-	/*
-	 * USB devices cannot blindly pass the skb->len as the
-	 * length of the data to usb_fill_bulk_urb. Pass the skb
-	 * to the driver to determine what the length should be.
-	 */
-	length = rt2x00dev->ops->lib->get_tx_data_len(entry);
-
-	usb_fill_bulk_urb(entry_priv->urb, usb_dev,
-			  usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint),
-			  entry->skb->data, length,
-			  rt2x00usb_interrupt_txdone, entry);
-
-	/*
-	 * Make sure the skb->data pointer points to the frame, not the
-	 * descriptor.
-	 */
-	skb_pull(entry->skb, entry->queue->desc_size);
+	if (test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) {
+		/*
+		 * USB devices cannot blindly pass the skb->len as the
+		 * length of the data to usb_fill_bulk_urb. Pass the skb
+		 * to the driver to determine what the length should be.
+		 */
+		length = rt2x00dev->ops->lib->get_tx_data_len(entry);
 
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);
+		usb_fill_bulk_urb(entry_priv->urb, usb_dev,
+				  usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint),
+				  entry->skb->data, length,
+				  rt2x00usb_interrupt_txdone, entry);
 
-static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
-{
-	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
-
-	if (test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags))
 		usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
+	}
 }
 
 void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
@@ -332,6 +292,56 @@ void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue);
 
+static void rt2x00usb_watchdog_reset_tx(struct data_queue *queue)
+{
+	struct queue_entry_priv_usb *entry_priv;
+	unsigned short threshold = queue->threshold;
+
+	WARNING(queue->rt2x00dev, "TX queue %d timed out, invoke reset", queue->qid);
+
+	/*
+	 * Temporarily disable the TX queue, this will force mac80211
+	 * to use the other queues until this queue has been restored.
+	 *
+	 * Set the queue threshold to the queue limit. This prevents the
+	 * queue from being enabled during the txdone handler.
+	 */
+	queue->threshold = queue->limit;
+	ieee80211_stop_queue(queue->rt2x00dev->hw, queue->qid);
+
+	/*
+	 * Reset all currently uploaded TX frames.
+	 */
+	while (!rt2x00queue_empty(queue)) {
+		entry_priv = rt2x00queue_get_entry(queue, Q_INDEX_DONE)->priv_data;
+		usb_kill_urb(entry_priv->urb);
+
+		/*
+		 * We need a short delay here to wait for
+		 * the URB to be canceled and invoked the tx_done handler.
+		 */
+		udelay(200);
+	}
+
+	/*
+	 * The queue has been reset, and mac80211 is allowed to use the
+	 * queue again.
+	 */
+	queue->threshold = threshold;
+	ieee80211_wake_queue(queue->rt2x00dev->hw, queue->qid);
+}
+
+void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+
+	tx_queue_for_each(rt2x00dev, queue) {
+		if (rt2x00queue_timeout(queue))
+			rt2x00usb_watchdog_reset_tx(queue);
+	}
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_watchdog);
+
 /*
  * RX data handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 621d0f829251..d3d3ddc40875 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -167,25 +167,6 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
 				   const u16 buffer_length, const int timeout);
 
 /**
- * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered)
- * @rt2x00dev: Pointer to &struct rt2x00_dev
- * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
- * @requesttype: Request type &USB_VENDOR_REQUEST_*
- * @offset: Register start offset to perform action on
- * @buffer: Buffer where information will be read/written to by device
- * @buffer_length: Size of &buffer
- * @timeout: Operation timeout
- *
- * This function is used to transfer register data in blocks larger
- * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons.
- */
-int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
-					const u8 request, const u8 requesttype,
-					const u16 offset, const void *buffer,
-					const u16 buffer_length,
-					const int timeout);
-
-/**
  * rt2x00usb_vendor_request_sw - Send single register command to device
  * @rt2x00dev: Pointer to &struct rt2x00_dev
  * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
@@ -370,16 +351,6 @@ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
 void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev);
 
 /**
- * rt2x00usb_write_tx_data - Initialize URB for TX operation
- * @entry: The entry where the frame is located
- *
- * This function will initialize the URB and skb descriptor
- * to prepare the entry for the actual TX operation.
- */
-int rt2x00usb_write_tx_data(struct queue_entry *entry,
-			    struct txentry_desc *txdesc);
-
-/**
  * struct queue_entry_priv_usb: Per entry USB specific information
  *
  * @urb: Urb structure used for device communication.
@@ -428,6 +399,16 @@ void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
 			      const enum data_queue_qid qid);
 
+/**
+ * rt2x00usb_watchdog - Watchdog for USB communication
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ *
+ * Check the health of the USB communication and determine
+ * if timeouts have occured. If this is the case, this function
+ * will reset all communication to restore functionality again.
+ */
+void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev);
+
 /*
  * Device initialization handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 6a74baf4e934..e539c6cb636f 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -931,6 +931,9 @@ static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_DOWN, 1);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_STEP, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_FALLBACK_CCK, 0);
 	rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT,
 			   libconf->conf->long_frame_max_tx_count);
 	rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT,
@@ -1619,7 +1622,8 @@ static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
 static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 			       enum dev_state state)
 {
-	int mask = (state == STATE_RADIO_IRQ_OFF);
+	int mask = (state == STATE_RADIO_IRQ_OFF) ||
+		   (state == STATE_RADIO_IRQ_OFF_ISR);
 	u32 reg;
 
 	/*
@@ -1736,7 +1740,9 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt61pci_toggle_rx(rt2x00dev, state);
 		break;
 	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
+	case STATE_RADIO_IRQ_OFF_ISR:
 		rt61pci_toggle_irq(rt2x00dev, state);
 		break;
 	case STATE_DEEP_SLEEP:
@@ -1874,6 +1880,16 @@ static void rt61pci_write_beacon(struct queue_entry *entry,
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 
 	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt61pci_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
+
+	/*
 	 * Write entire beacon with descriptor to register.
 	 */
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
@@ -2039,29 +2055,24 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 	struct txdone_entry_desc txdesc;
 	u32 word;
 	u32 reg;
-	u32 old_reg;
 	int type;
 	int index;
+	int i;
 
 	/*
-	 * During each loop we will compare the freshly read
-	 * STA_CSR4 register value with the value read from
-	 * the previous loop. If the 2 values are equal then
-	 * we should stop processing because the chance is
-	 * quite big that the device has been unplugged and
-	 * we risk going into an endless loop.
+	 * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
+	 * at most X times and also stop processing once the TX_STA_FIFO_VALID
+	 * flag is not set anymore.
+	 *
+	 * The legacy drivers use X=TX_RING_SIZE but state in a comment
+	 * that the TX_STA_FIFO stack has a size of 16. We stick to our
+	 * tx ring size for now.
 	 */
-	old_reg = 0;
-
-	while (1) {
+	for (i = 0; i < TX_ENTRIES; i++) {
 		rt2x00pci_register_read(rt2x00dev, STA_CSR4, &reg);
 		if (!rt2x00_get_field32(reg, STA_CSR4_VALID))
 			break;
 
-		if (old_reg == reg)
-			break;
-		old_reg = reg;
-
 		/*
 		 * Skip this entry when it contains an invalid
 		 * queue identication number.
@@ -2120,6 +2131,13 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 		}
 		txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
 
+		/*
+		 * the frame was retried at least once
+		 * -> hw used fallback rates
+		 */
+		if (txdesc.retry)
+			__set_bit(TXDONE_FALLBACK, &txdesc.flags);
+
 		rt2x00lib_txdone(entry, &txdesc);
 	}
 }
@@ -2132,27 +2150,11 @@ static void rt61pci_wakeup(struct rt2x00_dev *rt2x00dev)
 	rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
 }
 
-static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
+static irqreturn_t rt61pci_interrupt_thread(int irq, void *dev_instance)
 {
 	struct rt2x00_dev *rt2x00dev = dev_instance;
-	u32 reg_mcu;
-	u32 reg;
-
-	/*
-	 * Get the interrupt sources & saved to local variable.
-	 * Write register value back to clear pending interrupts.
-	 */
-	rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg_mcu);
-	rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
-
-	rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
-	rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-
-	if (!reg && !reg_mcu)
-		return IRQ_NONE;
-
-	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-		return IRQ_HANDLED;
+	u32 reg = rt2x00dev->irqvalue[0];
+	u32 reg_mcu = rt2x00dev->irqvalue[1];
 
 	/*
 	 * Handle interrupts, walk through all bits
@@ -2185,9 +2187,51 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
 	if (rt2x00_get_field32(reg_mcu, MCU_INT_SOURCE_CSR_TWAKEUP))
 		rt61pci_wakeup(rt2x00dev);
 
+	/*
+	 * 5 - Beacon done interrupt.
+	 */
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_BEACON_DONE))
+		rt2x00lib_beacondone(rt2x00dev);
+
+	/* Enable interrupts again. */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+					      STATE_RADIO_IRQ_ON_ISR);
 	return IRQ_HANDLED;
 }
 
+
+static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
+{
+	struct rt2x00_dev *rt2x00dev = dev_instance;
+	u32 reg_mcu;
+	u32 reg;
+
+	/*
+	 * Get the interrupt sources & saved to local variable.
+	 * Write register value back to clear pending interrupts.
+	 */
+	rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg_mcu);
+	rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
+
+	rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
+	rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+
+	if (!reg && !reg_mcu)
+		return IRQ_NONE;
+
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return IRQ_HANDLED;
+
+	/* Store irqvalues for use in the interrupt thread. */
+	rt2x00dev->irqvalue[0] = reg;
+	rt2x00dev->irqvalue[1] = reg_mcu;
+
+	/* Disable interrupts, will be enabled again in the interrupt thread. */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
+					      STATE_RADIO_IRQ_OFF_ISR);
+	return IRQ_WAKE_THREAD;
+}
+
 /*
  * Device probe functions.
  */
@@ -2577,6 +2621,18 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 						   EEPROM_MAC_ADDR_0));
 
 	/*
+	 * As rt61 has a global fallback table we cannot specify
+	 * more then one tx rate per frame but since the hw will
+	 * try several rates (based on the fallback table) we should
+	 * still initialize max_rates to the maximum number of rates
+	 * we are going to try. Otherwise mac80211 will truncate our
+	 * reported tx rates and the rc algortihm will end up with
+	 * incorrect data.
+	 */
+	rt2x00dev->hw->max_rates = 7;
+	rt2x00dev->hw->max_rate_tries = 1;
+
+	/*
 	 * Initialize hw_mode information.
 	 */
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
@@ -2657,6 +2713,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
 	if (!modparam_nohwcrypt)
 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+	__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -2748,8 +2805,9 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
 	.configure_filter	= rt2x00mac_configure_filter,
-	.set_tim		= rt2x00mac_set_tim,
 	.set_key		= rt2x00mac_set_key,
+	.sw_scan_start		= rt2x00mac_sw_scan_start,
+	.sw_scan_complete	= rt2x00mac_sw_scan_complete,
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt61pci_conf_tx,
@@ -2759,6 +2817,7 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 
 static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
 	.irq_handler		= rt61pci_interrupt,
+	.irq_handler_thread	= rt61pci_interrupt_thread,
 	.probe_hw		= rt61pci_probe_hw,
 	.get_firmware_name	= rt61pci_get_firmware_name,
 	.check_firmware		= rt61pci_check_firmware,
@@ -2773,7 +2832,6 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
 	.reset_tuner		= rt61pci_reset_tuner,
 	.link_tuner		= rt61pci_link_tuner,
 	.write_tx_desc		= rt61pci_write_tx_desc,
-	.write_tx_data		= rt2x00pci_write_tx_data,
 	.write_beacon		= rt61pci_write_beacon,
 	.kick_tx_queue		= rt61pci_kick_tx_queue,
 	.kill_tx_queue		= rt61pci_kill_tx_queue,
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index df80f1af22a4..e2e728ab0b2e 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -153,13 +153,13 @@ struct hw_key_entry {
 	u8 key[16];
 	u8 tx_mic[8];
 	u8 rx_mic[8];
-} __attribute__ ((packed));
+} __packed;
 
 struct hw_pairwise_ta_entry {
 	u8 address[6];
 	u8 cipher;
 	u8 reserved;
-} __attribute__ ((packed));
+} __packed;
 
 /*
  * Other on-chip shared memory space.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 6e0d82efe924..aa9de18fd410 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -270,7 +270,6 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
 {
 	struct hw_key_entry key_entry;
 	struct rt2x00_field32 field;
-	int timeout;
 	u32 mask;
 	u32 reg;
 
@@ -306,12 +305,8 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
 		       sizeof(key_entry.rx_mic));
 
 		reg = SHARED_KEY_ENTRY(key->hw_key_idx);
-		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-						    USB_VENDOR_REQUEST_OUT, reg,
-						    &key_entry,
-						    sizeof(key_entry),
-						    timeout);
+		rt2x00usb_register_multiwrite(rt2x00dev, reg,
+					      &key_entry, sizeof(key_entry));
 
 		/*
 		 * The cipher types are stored over 2 registers.
@@ -372,7 +367,6 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 {
 	struct hw_pairwise_ta_entry addr_entry;
 	struct hw_key_entry key_entry;
-	int timeout;
 	u32 mask;
 	u32 reg;
 
@@ -407,17 +401,11 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		       sizeof(key_entry.rx_mic));
 
 		reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-						    USB_VENDOR_REQUEST_OUT, reg,
-						    &key_entry,
-						    sizeof(key_entry),
-						    timeout);
+		rt2x00usb_register_multiwrite(rt2x00dev, reg,
+					      &key_entry, sizeof(key_entry));
 
 		/*
 		 * Send the address and cipher type to the hardware register.
-		 * This data fits within the CSR cache size, so we can use
-		 * rt2x00usb_register_multiwrite() directly.
 		 */
 		memset(&addr_entry, 0, sizeof(addr_entry));
 		memcpy(&addr_entry, crypto->address, ETH_ALEN);
@@ -828,6 +816,9 @@ static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_DOWN, 1);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_STEP, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_FALLBACK_CCK, 0);
 	rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT,
 			   libconf->conf->long_frame_max_tx_count);
 	rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT,
@@ -1092,11 +1083,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Write firmware to device.
 	 */
-	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-					    USB_VENDOR_REQUEST_OUT,
-					    FIRMWARE_IMAGE_BASE,
-					    data, len,
-					    REGISTER_TIMEOUT32(len));
+	rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, data, len);
 
 	/*
 	 * Send firmware request to device to load firmware,
@@ -1413,7 +1400,9 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt73usb_toggle_rx(rt2x00dev, state);
 		break;
 	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
+	case STATE_RADIO_IRQ_OFF_ISR:
 		/* No support, but no error either */
 		break;
 	case STATE_DEEP_SLEEP:
@@ -1442,7 +1431,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 				  struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	__le32 *txd = (__le32 *)(skb->data - TXD_DESC_SIZE);
+	__le32 *txd = (__le32 *) skb->data;
 	u32 word;
 
 	/*
@@ -1505,6 +1494,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Register descriptor details in skb frame descriptor.
 	 */
+	skbdesc->flags |= SKBDESC_DESC_IN_SKB;
 	skbdesc->desc = txd;
 	skbdesc->desc_len = TXD_DESC_SIZE;
 }
@@ -1528,18 +1518,27 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
 
 	/*
-	 * Take the descriptor in front of the skb into account.
+	 * Add space for the descriptor in front of the skb.
 	 */
 	skb_push(entry->skb, TXD_DESC_SIZE);
+	memset(entry->skb->data, 0, TXD_DESC_SIZE);
+
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt73usb_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
 	 * Write entire beacon with descriptor to register.
 	 */
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-					    USB_VENDOR_REQUEST_OUT, beacon_base,
-					    entry->skb->data, entry->skb->len,
-					    REGISTER_TIMEOUT32(entry->skb->len));
+	rt2x00usb_register_multiwrite(rt2x00dev, beacon_base,
+				      entry->skb->data, entry->skb->len);
 
 	/*
 	 * Enable beaconing again.
@@ -2138,6 +2137,8 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
 	if (!modparam_nohwcrypt)
 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+	__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
+	__set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -2231,6 +2232,8 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
 	.configure_filter	= rt2x00mac_configure_filter,
 	.set_tim		= rt2x00mac_set_tim,
 	.set_key		= rt2x00mac_set_key,
+	.sw_scan_start		= rt2x00mac_sw_scan_start,
+	.sw_scan_complete	= rt2x00mac_sw_scan_complete,
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt73usb_conf_tx,
@@ -2251,8 +2254,8 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
 	.link_stats		= rt73usb_link_stats,
 	.reset_tuner		= rt73usb_reset_tuner,
 	.link_tuner		= rt73usb_link_tuner,
+	.watchdog		= rt2x00usb_watchdog,
 	.write_tx_desc		= rt73usb_write_tx_desc,
-	.write_tx_data		= rt2x00usb_write_tx_data,
 	.write_beacon		= rt73usb_write_beacon,
 	.get_tx_data_len	= rt73usb_get_tx_data_len,
 	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 7abe7eb14555..44d5b2bebd39 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -108,13 +108,13 @@ struct hw_key_entry {
 	u8 key[16];
 	u8 tx_mic[8];
 	u8 rx_mic[8];
-} __attribute__ ((packed));
+} __packed;
 
 struct hw_pairwise_ta_entry {
 	u8 address[6];
 	u8 cipher;
 	u8 reserved;
-} __attribute__ ((packed));
+} __packed;
 
 /*
  * Since NULL frame won't be that long (256 byte),