[RT2x00]: add driver for Ralink wireless hardware

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 283 insertions, 0 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
new file mode 100644
index 000000000000..7927d5f7bcc7
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -0,0 +1,283 @@
+/*
+	Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00
+	Abstract: rt2x00 generic register information.
+ */
+
+#ifndef RT2X00REG_H
+#define RT2X00REG_H
+
+/*
+ * TX result flags.
+ */
+enum TX_STATUS {
+	TX_SUCCESS = 0,
+	TX_SUCCESS_RETRY = 1,
+	TX_FAIL_RETRY = 2,
+	TX_FAIL_INVALID = 3,
+	TX_FAIL_OTHER = 4,
+};
+
+/*
+ * Antenna values
+ */
+enum antenna {
+	ANTENNA_SW_DIVERSITY = 0,
+	ANTENNA_A = 1,
+	ANTENNA_B = 2,
+	ANTENNA_HW_DIVERSITY = 3,
+};
+
+/*
+ * Led mode values.
+ */
+enum led_mode {
+	LED_MODE_DEFAULT = 0,
+	LED_MODE_TXRX_ACTIVITY = 1,
+	LED_MODE_SIGNAL_STRENGTH = 2,
+	LED_MODE_ASUS = 3,
+	LED_MODE_ALPHA = 4,
+};
+
+/*
+ * Device states
+ */
+enum dev_state {
+	STATE_DEEP_SLEEP = 0,
+	STATE_SLEEP = 1,
+	STATE_STANDBY = 2,
+	STATE_AWAKE = 3,
+
+/*
+ * Additional device states, these values are
+ * not strict since they are not directly passed
+ * into the device.
+ */
+	STATE_RADIO_ON,
+	STATE_RADIO_OFF,
+	STATE_RADIO_RX_ON,
+	STATE_RADIO_RX_OFF,
+	STATE_RADIO_IRQ_ON,
+	STATE_RADIO_IRQ_OFF,
+};
+
+/*
+ * IFS backoff values
+ */
+enum ifs {
+	IFS_BACKOFF = 0,
+	IFS_SIFS = 1,
+	IFS_NEW_BACKOFF = 2,
+	IFS_NONE = 3,
+};
+
+/*
+ * Cipher types for hardware encryption
+ */
+enum cipher {
+	CIPHER_NONE = 0,
+	CIPHER_WEP64 = 1,
+	CIPHER_WEP128 = 2,
+	CIPHER_TKIP = 3,
+	CIPHER_AES = 4,
+/*
+ * The following fields were added by rt61pci and rt73usb.
+ */
+	CIPHER_CKIP64 = 5,
+	CIPHER_CKIP128 = 6,
+	CIPHER_TKIP_NO_MIC = 7,
+};
+
+/*
+ * Register handlers.
+ * We store the position of a register field inside a field structure,
+ * This will simplify the process of setting and reading a certain field
+ * inside the register while making sure the process remains byte order safe.
+ */
+struct rt2x00_field8 {
+	u8 bit_offset;
+	u8 bit_mask;
+};
+
+struct rt2x00_field16 {
+	u16 bit_offset;
+	u16 bit_mask;
+};
+
+struct rt2x00_field32 {
+	u32 bit_offset;
+	u32 bit_mask;
+};
+
+/*
+ * Power of two check, this will check
+ * if the mask that has been given contains
+ * and contiguous set of bits.
+ */
+#define is_power_of_two(x)	( !((x) & ((x)-1)) )
+#define low_bit_mask(x)		( ((x)-1) & ~(x) )
+#define is_valid_mask(x)	is_power_of_two(1 + (x) + low_bit_mask(x))
+
+#define FIELD8(__mask)				\
+({						\
+	BUILD_BUG_ON(!(__mask) ||		\
+		     !is_valid_mask(__mask) ||	\
+		     (__mask) != (u8)(__mask));	\
+	(struct rt2x00_field8) {		\
+		__ffs(__mask), (__mask)		\
+	};					\
+})
+
+#define FIELD16(__mask)				\
+({						\
+	BUILD_BUG_ON(!(__mask) ||		\
+		     !is_valid_mask(__mask) ||	\
+		     (__mask) != (u16)(__mask));\
+	(struct rt2x00_field16) {		\
+		__ffs(__mask), (__mask)		\
+	};					\
+})
+
+#define FIELD32(__mask)				\
+({						\
+	BUILD_BUG_ON(!(__mask) ||		\
+		     !is_valid_mask(__mask) ||	\
+		     (__mask) != (u32)(__mask));\
+	(struct rt2x00_field32) {		\
+		__ffs(__mask), (__mask)		\
+	};					\
+})
+
+static inline void rt2x00_set_field32(u32 *reg,
+				      const struct rt2x00_field32 field,
+				      const u32 value)
+{
+	*reg &= ~(field.bit_mask);
+	*reg |= (value << field.bit_offset) & field.bit_mask;
+}
+
+static inline u32 rt2x00_get_field32(const u32 reg,
+				     const struct rt2x00_field32 field)
+{
+	return (reg & field.bit_mask) >> field.bit_offset;
+}
+
+static inline void rt2x00_set_field16(u16 *reg,
+				      const struct rt2x00_field16 field,
+				      const u16 value)
+{
+	*reg &= ~(field.bit_mask);
+	*reg |= (value << field.bit_offset) & field.bit_mask;
+}
+
+static inline u16 rt2x00_get_field16(const u16 reg,
+				     const struct rt2x00_field16 field)
+{
+	return (reg & field.bit_mask) >> field.bit_offset;
+}
+
+static inline void rt2x00_set_field8(u8 *reg,
+				     const struct rt2x00_field8 field,
+				     const u8 value)
+{
+	*reg &= ~(field.bit_mask);
+	*reg |= (value << field.bit_offset) & field.bit_mask;
+}
+
+static inline u8 rt2x00_get_field8(const u8 reg,
+				   const struct rt2x00_field8 field)
+{
+	return (reg & field.bit_mask) >> field.bit_offset;
+}
+
+/*
+ * Device specific rate value.
+ * We will have to create the device specific rate value
+ * passed to the ieee80211 kernel. We need to make it a consist of
+ * multiple fields because we want to store more then 1 device specific
+ * values inside the value.
+ *	1 - rate, stored as 100 kbit/s.
+ *	2 - preamble, short_preamble enabled flag.
+ *	3 - MASK_RATE, which rates are enabled in this mode, this mask
+ *	corresponds with the TX register format for the current device.
+ *	4 - plcp, 802.11b rates are device specific,
+ *	802.11g rates are set according to the ieee802.11a-1999 p.14.
+ * The bit to enable preamble is set in a seperate define.
+ */
+#define DEV_RATE	FIELD32(0x000007ff)
+#define DEV_PREAMBLE	FIELD32(0x00000800)
+#define DEV_RATEMASK	FIELD32(0x00fff000)
+#define DEV_PLCP	FIELD32(0xff000000)
+
+/*
+ * Bitfields
+ */
+#define DEV_RATEBIT_1MB		( 1 << 0 )
+#define DEV_RATEBIT_2MB		( 1 << 1 )
+#define DEV_RATEBIT_5_5MB	( 1 << 2 )
+#define DEV_RATEBIT_11MB	( 1 << 3 )
+#define DEV_RATEBIT_6MB		( 1 << 4 )
+#define DEV_RATEBIT_9MB		( 1 << 5 )
+#define DEV_RATEBIT_12MB	( 1 << 6 )
+#define DEV_RATEBIT_18MB	( 1 << 7 )
+#define DEV_RATEBIT_24MB	( 1 << 8 )
+#define DEV_RATEBIT_36MB	( 1 << 9 )
+#define DEV_RATEBIT_48MB	( 1 << 10 )
+#define DEV_RATEBIT_54MB	( 1 << 11 )
+
+/*
+ * Bitmasks for DEV_RATEMASK
+ */
+#define DEV_RATEMASK_1MB	( (DEV_RATEBIT_1MB << 1) -1 )
+#define DEV_RATEMASK_2MB	( (DEV_RATEBIT_2MB << 1) -1 )
+#define DEV_RATEMASK_5_5MB	( (DEV_RATEBIT_5_5MB << 1) -1 )
+#define DEV_RATEMASK_11MB	( (DEV_RATEBIT_11MB << 1) -1 )
+#define DEV_RATEMASK_6MB	( (DEV_RATEBIT_6MB << 1) -1 )
+#define DEV_RATEMASK_9MB	( (DEV_RATEBIT_9MB << 1) -1 )
+#define DEV_RATEMASK_12MB	( (DEV_RATEBIT_12MB << 1) -1 )
+#define DEV_RATEMASK_18MB	( (DEV_RATEBIT_18MB << 1) -1 )
+#define DEV_RATEMASK_24MB	( (DEV_RATEBIT_24MB << 1) -1 )
+#define DEV_RATEMASK_36MB	( (DEV_RATEBIT_36MB << 1) -1 )
+#define DEV_RATEMASK_48MB	( (DEV_RATEBIT_48MB << 1) -1 )
+#define DEV_RATEMASK_54MB	( (DEV_RATEBIT_54MB << 1) -1 )
+
+/*
+ * Bitmask groups of bitrates
+ */
+#define DEV_BASIC_RATEMASK \
+	( DEV_RATEMASK_11MB | \
+	  DEV_RATEBIT_6MB | DEV_RATEBIT_12MB | DEV_RATEBIT_24MB )
+
+#define DEV_CCK_RATEMASK	( DEV_RATEMASK_11MB )
+#define DEV_OFDM_RATEMASK	( DEV_RATEMASK_54MB & ~DEV_CCK_RATEMASK )
+
+/*
+ * Macro's to set and get specific fields from the device specific val and val2
+ * fields inside the ieee80211_rate entry.
+ */
+#define DEVICE_SET_RATE_FIELD(__value, __mask) \
+	(int)( ((__value) << DEV_##__mask.bit_offset) & DEV_##__mask.bit_mask )
+
+#define DEVICE_GET_RATE_FIELD(__value, __mask) \
+	(int)( ((__value) & DEV_##__mask.bit_mask) >> DEV_##__mask.bit_offset )
+
+#endif /* RT2X00REG_H */