Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...

1 files changed, 140 insertions, 27 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index cc8deecea8cb..bcd7f454ef30 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -17,6 +17,7 @@
 
 #include <linux/module.h>
 #include "rsi_usb.h"
+#include "rsi_hal.h"
 
 /**
  * rsi_usb_card_write() - This function writes to the USB Card.
@@ -141,6 +142,9 @@ static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
 	return 0;
 }
 
+#define RSI_USB_REQ_OUT	(USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE)
+#define RSI_USB_REQ_IN	(USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE)
+
 /* rsi_usb_reg_read() - This function reads data from given register address.
  * @usbdev: Pointer to the usb_device structure.
  * @reg: Address of the register to be read.
@@ -164,11 +168,11 @@ static int rsi_usb_reg_read(struct usb_device *usbdev,
 	status = usb_control_msg(usbdev,
 				 usb_rcvctrlpipe(usbdev, 0),
 				 USB_VENDOR_REGISTER_READ,
-				 USB_TYPE_VENDOR,
+				 RSI_USB_REQ_IN,
 				 ((reg & 0xffff0000) >> 16), (reg & 0xffff),
 				 (void *)buf,
 				 len,
-				 HZ * 5);
+				 USB_CTRL_GET_TIMEOUT);
 
 	*value = (buf[0] | (buf[1] << 8));
 	if (status < 0) {
@@ -211,12 +215,12 @@ static int rsi_usb_reg_write(struct usb_device *usbdev,
 	status = usb_control_msg(usbdev,
 				 usb_sndctrlpipe(usbdev, 0),
 				 USB_VENDOR_REGISTER_WRITE,
-				 USB_TYPE_VENDOR,
+				 RSI_USB_REQ_OUT,
 				 ((reg & 0xffff0000) >> 16),
 				 (reg & 0xffff),
 				 (void *)usb_reg_buf,
 				 len,
-				 HZ * 5);
+				 USB_CTRL_SET_TIMEOUT);
 	if (status < 0) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Reg write failed with error code :%d\n",
@@ -273,6 +277,46 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter)
 	return status;
 }
 
+static int rsi_usb_read_register_multiple(struct rsi_hw *adapter, u32 addr,
+					  u8 *data, u16 count)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	u8 *buf;
+	u16 transfer;
+	int status;
+
+	if (!addr)
+		return -EINVAL;
+
+	buf = kzalloc(RSI_USB_BUF_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	while (count) {
+		transfer = min_t(u16, count, RSI_USB_BUF_SIZE);
+		status = usb_control_msg(dev->usbdev,
+					 usb_rcvctrlpipe(dev->usbdev, 0),
+					 USB_VENDOR_REGISTER_READ,
+					 RSI_USB_REQ_IN,
+					 ((addr & 0xffff0000) >> 16),
+					 (addr & 0xffff), (void *)buf,
+					 transfer, USB_CTRL_GET_TIMEOUT);
+		if (status < 0) {
+			rsi_dbg(ERR_ZONE,
+				"Reg read failed with error code :%d\n",
+				 status);
+			kfree(buf);
+			return status;
+		}
+		memcpy(data, buf, transfer);
+		count -= transfer;
+		data += transfer;
+		addr += transfer;
+	}
+	kfree(buf);
+	return 0;
+}
+
 /**
  * rsi_usb_write_register_multiple() - This function writes multiple bytes of
  *				       information to multiple registers.
@@ -283,41 +327,40 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter)
  *
  * Return: status: 0 on success, a negative error code on failure.
  */
-int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
-				    u32 addr,
-				    u8 *data,
-				    u32 count)
+static int rsi_usb_write_register_multiple(struct rsi_hw *adapter, u32 addr,
+					   u8 *data, u16 count)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	u8 *buf;
-	u8 transfer;
+	u16 transfer;
 	int status = 0;
 
-	buf = kzalloc(4096, GFP_KERNEL);
+	buf = kzalloc(RSI_USB_BUF_SIZE, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
 	while (count) {
-		transfer = (u8)(min_t(u32, count, 4096));
+		transfer = min_t(u16, count, RSI_USB_BUF_SIZE);
 		memcpy(buf, data, transfer);
 		status = usb_control_msg(dev->usbdev,
 					 usb_sndctrlpipe(dev->usbdev, 0),
 					 USB_VENDOR_REGISTER_WRITE,
-					 USB_TYPE_VENDOR,
+					 RSI_USB_REQ_OUT,
 					 ((addr & 0xffff0000) >> 16),
 					 (addr & 0xffff),
 					 (void *)buf,
 					 transfer,
-					 HZ * 5);
+					 USB_CTRL_SET_TIMEOUT);
 		if (status < 0) {
 			rsi_dbg(ERR_ZONE,
 				"Reg write failed with error code :%d\n",
 				status);
-		} else {
-			count -= transfer;
-			data += transfer;
-			addr += transfer;
+			kfree(buf);
+			return status;
 		}
+		count -= transfer;
+		data += transfer;
+		addr += transfer;
 	}
 
 	kfree(buf);
@@ -348,6 +391,77 @@ static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
 				  len);
 }
 
+static int rsi_usb_master_reg_read(struct rsi_hw *adapter, u32 reg,
+				   u32 *value, u16 len)
+{
+	struct usb_device *usbdev =
+		((struct rsi_91x_usbdev *)adapter->rsi_dev)->usbdev;
+
+	return rsi_usb_reg_read(usbdev, reg, (u16 *)value, len);
+}
+
+static int rsi_usb_master_reg_write(struct rsi_hw *adapter,
+				    unsigned long reg,
+				    unsigned long value, u16 len)
+{
+	struct usb_device *usbdev =
+		((struct rsi_91x_usbdev *)adapter->rsi_dev)->usbdev;
+
+	return rsi_usb_reg_write(usbdev, reg, value, len);
+}
+
+static int rsi_usb_load_data_master_write(struct rsi_hw *adapter,
+					  u32 base_address,
+					  u32 instructions_sz, u16 block_size,
+					  u8 *ta_firmware)
+{
+	u16 num_blocks;
+	u32 cur_indx, i;
+	u8 temp_buf[256];
+	int status;
+
+	num_blocks = instructions_sz / block_size;
+	rsi_dbg(INFO_ZONE, "num_blocks: %d\n", num_blocks);
+
+	for (cur_indx = 0, i = 0; i < num_blocks; i++, cur_indx += block_size) {
+		memset(temp_buf, 0, block_size);
+		memcpy(temp_buf, ta_firmware + cur_indx, block_size);
+		status = rsi_usb_write_register_multiple(adapter, base_address,
+							 (u8 *)(temp_buf),
+							 block_size);
+		if (status < 0)
+			return status;
+
+		rsi_dbg(INFO_ZONE, "%s: loading block: %d\n", __func__, i);
+		base_address += block_size;
+	}
+
+	if (instructions_sz % block_size) {
+		memset(temp_buf, 0, block_size);
+		memcpy(temp_buf, ta_firmware + cur_indx,
+		       instructions_sz % block_size);
+		status = rsi_usb_write_register_multiple
+						(adapter, base_address,
+						 (u8 *)temp_buf,
+						 instructions_sz % block_size);
+		if (status < 0)
+			return status;
+		rsi_dbg(INFO_ZONE,
+			"Written Last Block in Address 0x%x Successfully\n",
+			cur_indx);
+	}
+	return 0;
+}
+
+static struct rsi_host_intf_ops usb_host_intf_ops = {
+	.write_pkt		= rsi_usb_host_intf_write_pkt,
+	.read_reg_multiple	= rsi_usb_read_register_multiple,
+	.write_reg_multiple	= rsi_usb_write_register_multiple,
+	.master_reg_read	= rsi_usb_master_reg_read,
+	.master_reg_write	= rsi_usb_master_reg_write,
+	.load_data_master_write	= rsi_usb_load_data_master_write,
+};
+
 /**
  * rsi_deinit_usb_interface() - This function deinitializes the usb interface.
  * @adapter: Pointer to the adapter structure.
@@ -410,12 +524,14 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
 	}
 	rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt;
 	rsi_dev->tx_blk_size = 252;
+	adapter->block_size = rsi_dev->tx_blk_size;
 
 	/* Initializing function callbacks */
 	adapter->rx_urb_submit = rsi_rx_urb_submit;
-	adapter->host_intf_write_pkt = rsi_usb_host_intf_write_pkt;
 	adapter->check_hw_queue_status = rsi_usb_check_queue_status;
 	adapter->determine_event_timeout = rsi_usb_event_timeout;
+	adapter->rsi_host_intf = RSI_HOST_INTF_USB;
+	adapter->host_intf_ops = &usb_host_intf_ops;
 
 	rsi_init_event(&rsi_dev->rx_thread.event);
 	status = rsi_create_kthread(common, &rsi_dev->rx_thread,
@@ -467,6 +583,7 @@ static int rsi_probe(struct usb_interface *pfunction,
 			__func__);
 		return -ENOMEM;
 	}
+	adapter->rsi_host_intf = RSI_HOST_INTF_USB;
 
 	status = rsi_init_usb_interface(adapter, pfunction);
 	if (status) {
@@ -480,25 +597,20 @@ static int rsi_probe(struct usb_interface *pfunction,
 	dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 
 	status = rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2);
-	if (status)
+	if (status < 0)
 		goto err1;
 	else
 		fw_status &= 1;
 
 	if (!fw_status) {
-		status = rsi_usb_device_init(adapter->priv);
+		rsi_dbg(INIT_ZONE, "Loading firmware...\n");
+		status = rsi_hal_device_init(adapter);
 		if (status) {
 			rsi_dbg(ERR_ZONE, "%s: Failed in device init\n",
 				__func__);
 			goto err1;
 		}
-
-		status = rsi_usb_reg_write(dev->usbdev,
-					   USB_INTERNAL_REG_1,
-					   RSI_USB_READY_MAGIC_NUM, 1);
-		if (status)
-			goto err1;
-		rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__);
+		rsi_dbg(INIT_ZONE, "%s: Device Init Done\n", __func__);
 	}
 
 	status = rsi_rx_urb_submit(adapter);
@@ -554,6 +666,7 @@ static const struct usb_device_id rsi_dev_table[] = {
 	{ USB_DEVICE(0x041B, 0x0301) },
 	{ USB_DEVICE(0x041B, 0x0201) },
 	{ USB_DEVICE(0x041B, 0x9330) },
+	{ USB_DEVICE(0x1618, 0x9113) },
 	{ /* Blank */},
 };