Merge tag 'wireless-drivers-next-for-davem-2015-10-27' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
here's a bigger pull request for 4.4. The diffstat looks scary as we
created a new directory realtek for all realtek drivers. In the future
I'm planning to create similar directories for all vendors, currently we
just have ath, mediatek and realtek. This change has been in linux-next
for a couple of weeks so it should be safe, but of course you never
know.

There's also a new driver rtl8xxxu for few realtek USB devices. This
just made it to the last linux-next build.

Otherwise there's nothing really special, more info below. If time
permits, and it's ok for you, I'm hoping to send you a one more pull
request this week.

brcmfmac

* using netdev carrier state
* add and rework some cfg80211 callbacks mainly for AP mode
* use devcoredump when triggered by firmware event

realtek

* create new directory drivers/net/wireless/realtek/ for all realtek
  drivers, not visible to users (no kconfig changes etc)
* add rtl8xxxu, a new mac80211 driver for RTL8723AU, RTL8188CU,
  RTL8188RU, RTL8191CU, RTL8192CU and hopefully more in the future

ath10k

* add board 2 API support for automatically choosing correct board file
* data path optimisations
* disable PCI power save for qca988x and QCA99x0 due to interop reasons

wil6210

* BlockAckReq support
* firmware crashdump using devcoredump
* capture all frames with sniffer
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 463 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
new file mode 100644
index 000000000000..8ee141a55bc5
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
@@ -0,0 +1,463 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../core.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "hw.h"
+#include "fw.h"
+#include "sw.h"
+#include "trx.h"
+#include "led.h"
+#include "table.h"
+#include "../btcoexist/rtl_btc.h"
+
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+
+static void rtl8821ae_init_aspm_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	/*close ASPM for AMD defaultly */
+	rtlpci->const_amdpci_aspm = 0;
+
+	/**
+	 * ASPM PS mode.
+	 * 0 - Disable ASPM,
+	 * 1 - Enable ASPM without Clock Req,
+	 * 2 - Enable ASPM with Clock Req,
+	 * 3 - Alwyas Enable ASPM with Clock Req,
+	 * 4 - Always Enable ASPM without Clock Req.
+	 * set defult to RTL8192CE:3 RTL8192E:2
+	 */
+	rtlpci->const_pci_aspm = 3;
+
+	/*Setting for PCI-E device */
+	rtlpci->const_devicepci_aspm_setting = 0x03;
+
+	/*Setting for PCI-E bridge */
+	rtlpci->const_hostpci_aspm_setting = 0x02;
+
+	/**
+	 * In Hw/Sw Radio Off situation.
+	 * 0 - Default,
+	 * 1 - From ASPM setting without low Mac Pwr,
+	 * 2 - From ASPM setting with low Mac Pwr,
+	 * 3 - Bus D3
+	 * set default to RTL8192CE:0 RTL8192SE:2
+	 */
+	rtlpci->const_hwsw_rfoff_d3 = 0;
+
+	/**
+	 * This setting works for those device with
+	 * backdoor ASPM setting such as EPHY setting.
+	 * 0 - Not support ASPM,
+	 * 1 - Support ASPM,
+	 * 2 - According to chipset.
+	 */
+	rtlpci->const_support_pciaspm = 1;
+}
+
+/*InitializeVariables8812E*/
+int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
+{
+	int err = 0;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	rtl8821ae_bt_reg_init(hw);
+	rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+	rtlpci->int_clear = rtlpriv->cfg->mod_params->int_clear;
+	rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
+
+	rtlpriv->dm.dm_initialgain_enable = 1;
+	rtlpriv->dm.dm_flag = 0;
+	rtlpriv->dm.disable_framebursting = 0;
+	rtlpriv->dm.thermalvalue = 0;
+	rtlpci->transmit_config = CFENDFORM | BIT(15) | BIT(24) | BIT(25);
+
+	mac->ht_enable = true;
+	mac->ht_cur_stbc = 0;
+	mac->ht_stbc_cap = 0;
+	mac->vht_cur_ldpc = 0;
+	mac->vht_ldpc_cap = 0;
+	mac->vht_cur_stbc = 0;
+	mac->vht_stbc_cap = 0;
+
+	rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
+	/*following 2 is for register 5G band, refer to _rtl_init_mac80211()*/
+	rtlpriv->rtlhal.bandset = BAND_ON_BOTH;
+	rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
+
+	rtlpci->receive_config = (RCR_APPFCS	|
+				RCR_APP_MIC		|
+				RCR_APP_ICV		|
+				RCR_APP_PHYST_RXFF	|
+				RCR_NONQOS_VHT		|
+				RCR_HTC_LOC_CTRL	|
+				RCR_AMF			|
+				RCR_ACF			|
+			/*This bit controls the PS-Poll packet filter.*/
+				RCR_ADF			|
+				RCR_AICV		|
+				RCR_ACRC32		|
+				RCR_AB			|
+				RCR_AM			|
+				RCR_APM			|
+				0);
+
+	rtlpci->irq_mask[0] =
+	     (u32)(IMR_PSTIMEOUT			|
+				IMR_GTINT3		|
+				IMR_HSISR_IND_ON_INT	|
+				IMR_C2HCMD		|
+				IMR_HIGHDOK		|
+				IMR_MGNTDOK		|
+				IMR_BKDOK		|
+				IMR_BEDOK		|
+				IMR_VIDOK		|
+				IMR_VODOK		|
+				IMR_RDU			|
+				IMR_ROK			|
+				0);
+
+	rtlpci->irq_mask[1]	=
+		 (u32)(IMR_RXFOVW |
+				IMR_TXFOVW |
+				0);
+	rtlpci->sys_irq_mask = (u32)(HSIMR_PDN_INT_EN	|
+				      HSIMR_RON_INT_EN	|
+				      0);
+	/* for WOWLAN */
+	rtlpriv->psc.wo_wlan_mode = WAKE_ON_MAGIC_PACKET |
+				    WAKE_ON_PATTERN_MATCH;
+
+	/* for debug level */
+	rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
+	/* for LPS & IPS */
+	rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
+	rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
+	rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
+	rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+	rtlpci->msi_support = rtlpriv->cfg->mod_params->int_clear;
+	if (rtlpriv->cfg->mod_params->disable_watchdog)
+		pr_info("watchdog disabled\n");
+	rtlpriv->psc.reg_fwctrl_lps = 3;
+	rtlpriv->psc.reg_max_lps_awakeintvl = 5;
+	rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+
+	/* for ASPM, you can close aspm through
+	 * set const_support_pciaspm = 0
+	 */
+	rtl8821ae_init_aspm_vars(hw);
+
+	if (rtlpriv->psc.reg_fwctrl_lps == 1)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
+	else if (rtlpriv->psc.reg_fwctrl_lps == 2)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
+	else if (rtlpriv->psc.reg_fwctrl_lps == 3)
+		rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
+
+	/* for firmware buf */
+	rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
+	if (!rtlpriv->rtlhal.pfirmware) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Can't alloc buffer for fw.\n");
+		return 1;
+	}
+	rtlpriv->rtlhal.wowlan_firmware = vzalloc(0x8000);
+	if (!rtlpriv->rtlhal.wowlan_firmware) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Can't alloc buffer for wowlan fw.\n");
+		return 1;
+	}
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE) {
+		rtlpriv->cfg->fw_name = "rtlwifi/rtl8812aefw.bin";
+		rtlpriv->cfg->wowlan_fw_name = "rtlwifi/rtl8812aefw_wowlan.bin";
+	} else {
+		rtlpriv->cfg->fw_name = "rtlwifi/rtl8821aefw.bin";
+		rtlpriv->cfg->wowlan_fw_name = "rtlwifi/rtl8821aefw_wowlan.bin";
+	}
+
+	rtlpriv->max_fw_size = 0x8000;
+	/*load normal firmware*/
+	pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name);
+	err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
+				      rtlpriv->io.dev, GFP_KERNEL, hw,
+				      rtl_fw_cb);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Failed to request normal firmware!\n");
+		return 1;
+	}
+	/*load wowlan firmware*/
+	pr_info("Using firmware %s\n", rtlpriv->cfg->wowlan_fw_name);
+	err = request_firmware_nowait(THIS_MODULE, 1,
+				      rtlpriv->cfg->wowlan_fw_name,
+				      rtlpriv->io.dev, GFP_KERNEL, hw,
+				      rtl_wowlan_fw_cb);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Failed to request wowlan firmware!\n");
+		return 1;
+	}
+	return 0;
+}
+
+void rtl8821ae_deinit_sw_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->rtlhal.pfirmware) {
+		vfree(rtlpriv->rtlhal.pfirmware);
+		rtlpriv->rtlhal.pfirmware = NULL;
+	}
+#if (USE_SPECIFIC_FW_TO_SUPPORT_WOWLAN == 1)
+	if (rtlpriv->rtlhal.wowlan_firmware) {
+		vfree(rtlpriv->rtlhal.wowlan_firmware);
+		rtlpriv->rtlhal.wowlan_firmware = NULL;
+	}
+#endif
+}
+
+/* get bt coexist status */
+bool rtl8821ae_get_btc_status(void)
+{
+	return true;
+}
+
+static struct rtl_hal_ops rtl8821ae_hal_ops = {
+	.init_sw_vars = rtl8821ae_init_sw_vars,
+	.deinit_sw_vars = rtl8821ae_deinit_sw_vars,
+	.read_eeprom_info = rtl8821ae_read_eeprom_info,
+	.interrupt_recognized = rtl8821ae_interrupt_recognized,
+	.hw_init = rtl8821ae_hw_init,
+	.hw_disable = rtl8821ae_card_disable,
+	.hw_suspend = rtl8821ae_suspend,
+	.hw_resume = rtl8821ae_resume,
+	.enable_interrupt = rtl8821ae_enable_interrupt,
+	.disable_interrupt = rtl8821ae_disable_interrupt,
+	.set_network_type = rtl8821ae_set_network_type,
+	.set_chk_bssid = rtl8821ae_set_check_bssid,
+	.set_qos = rtl8821ae_set_qos,
+	.set_bcn_reg = rtl8821ae_set_beacon_related_registers,
+	.set_bcn_intv = rtl8821ae_set_beacon_interval,
+	.update_interrupt_mask = rtl8821ae_update_interrupt_mask,
+	.get_hw_reg = rtl8821ae_get_hw_reg,
+	.set_hw_reg = rtl8821ae_set_hw_reg,
+	.update_rate_tbl = rtl8821ae_update_hal_rate_tbl,
+	.fill_tx_desc = rtl8821ae_tx_fill_desc,
+	.fill_tx_cmddesc = rtl8821ae_tx_fill_cmddesc,
+	.query_rx_desc = rtl8821ae_rx_query_desc,
+	.set_channel_access = rtl8821ae_update_channel_access_setting,
+	.radio_onoff_checking = rtl8821ae_gpio_radio_on_off_checking,
+	.set_bw_mode = rtl8821ae_phy_set_bw_mode,
+	.switch_channel = rtl8821ae_phy_sw_chnl,
+	.dm_watchdog = rtl8821ae_dm_watchdog,
+	.scan_operation_backup = rtl8821ae_phy_scan_operation_backup,
+	.set_rf_power_state = rtl8821ae_phy_set_rf_power_state,
+	.led_control = rtl8821ae_led_control,
+	.set_desc = rtl8821ae_set_desc,
+	.get_desc = rtl8821ae_get_desc,
+	.is_tx_desc_closed = rtl8821ae_is_tx_desc_closed,
+	.tx_polling = rtl8821ae_tx_polling,
+	.enable_hw_sec = rtl8821ae_enable_hw_security_config,
+	.set_key = rtl8821ae_set_key,
+	.init_sw_leds = rtl8821ae_init_sw_leds,
+	.get_bbreg = rtl8821ae_phy_query_bb_reg,
+	.set_bbreg = rtl8821ae_phy_set_bb_reg,
+	.get_rfreg = rtl8821ae_phy_query_rf_reg,
+	.set_rfreg = rtl8821ae_phy_set_rf_reg,
+	.fill_h2c_cmd = rtl8821ae_fill_h2c_cmd,
+	.get_btc_status = rtl8821ae_get_btc_status,
+	.rx_command_packet = rtl8821ae_rx_command_packet,
+	.add_wowlan_pattern = rtl8821ae_add_wowlan_pattern,
+};
+
+static struct rtl_mod_params rtl8821ae_mod_params = {
+	.sw_crypto = false,
+	.inactiveps = true,
+	.swctrl_lps = false,
+	.fwctrl_lps = true,
+	.msi_support = true,
+	.int_clear = true,
+	.debug = DBG_EMERG,
+	.disable_watchdog = 0,
+};
+
+static struct rtl_hal_cfg rtl8821ae_hal_cfg = {
+	.bar_id = 2,
+	.write_readback = true,
+	.name = "rtl8821ae_pci",
+	.fw_name = "rtlwifi/rtl8821aefw.bin",
+	.ops = &rtl8821ae_hal_ops,
+	.mod_params = &rtl8821ae_mod_params,
+	.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
+	.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
+	.maps[SYS_CLK] = REG_SYS_CLKR,
+	.maps[MAC_RCR_AM] = AM,
+	.maps[MAC_RCR_AB] = AB,
+	.maps[MAC_RCR_ACRC32] = ACRC32,
+	.maps[MAC_RCR_ACF] = ACF,
+	.maps[MAC_RCR_AAP] = AAP,
+	.maps[MAC_HIMR] = REG_HIMR,
+	.maps[MAC_HIMRE] = REG_HIMRE,
+
+	.maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS,
+
+	.maps[EFUSE_TEST] = REG_EFUSE_TEST,
+	.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_CLK] = 0,
+	.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_PWC_EV12V] = PWC_EV12V,
+	.maps[EFUSE_FEN_ELDR] = FEN_ELDR,
+	.maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
+	.maps[EFUSE_ANA8M] = ANA8M,
+	.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
+	.maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
+	.maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
+	.maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
+
+	.maps[RWCAM] = REG_CAMCMD,
+	.maps[WCAMI] = REG_CAMWRITE,
+	.maps[RCAMO] = REG_CAMREAD,
+	.maps[CAMDBG] = REG_CAMDBG,
+	.maps[SECR] = REG_SECCFG,
+	.maps[SEC_CAM_NONE] = CAM_NONE,
+	.maps[SEC_CAM_WEP40] = CAM_WEP40,
+	.maps[SEC_CAM_TKIP] = CAM_TKIP,
+	.maps[SEC_CAM_AES] = CAM_AES,
+	.maps[SEC_CAM_WEP104] = CAM_WEP104,
+
+	.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
+	.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
+	.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
+	.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
+	.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
+	.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
+/*	.maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,     */   /*need check*/
+	.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
+	.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
+	.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
+	.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
+	.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
+	.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
+	.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
+/*	.maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,*/
+/*	.maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,*/
+
+	.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
+	.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
+	.maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0,
+	.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
+	.maps[RTL_IMR_RDU] = IMR_RDU,
+	.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
+	.maps[RTL_IMR_BDOK] = IMR_BCNDOK0,
+	.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
+	.maps[RTL_IMR_TBDER] = IMR_TBDER,
+	.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
+	.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
+	.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
+	.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
+	.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
+	.maps[RTL_IMR_VODOK] = IMR_VODOK,
+	.maps[RTL_IMR_ROK] = IMR_ROK,
+	.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER),
+
+	.maps[RTL_RC_CCK_RATE1M] = DESC_RATE1M,
+	.maps[RTL_RC_CCK_RATE2M] =  DESC_RATE2M,
+	.maps[RTL_RC_CCK_RATE5_5M] =  DESC_RATE5_5M,
+	.maps[RTL_RC_CCK_RATE11M] =  DESC_RATE11M,
+	.maps[RTL_RC_OFDM_RATE6M] =  DESC_RATE6M,
+	.maps[RTL_RC_OFDM_RATE9M] =  DESC_RATE9M,
+	.maps[RTL_RC_OFDM_RATE12M] =  DESC_RATE12M,
+	.maps[RTL_RC_OFDM_RATE18M] =  DESC_RATE18M,
+	.maps[RTL_RC_OFDM_RATE24M] =  DESC_RATE24M,
+	.maps[RTL_RC_OFDM_RATE36M] =  DESC_RATE36M,
+	.maps[RTL_RC_OFDM_RATE48M] =  DESC_RATE48M,
+	.maps[RTL_RC_OFDM_RATE54M] =  DESC_RATE54M,
+
+	.maps[RTL_RC_HT_RATEMCS7] =  DESC_RATEMCS7,
+	.maps[RTL_RC_HT_RATEMCS15] =  DESC_RATEMCS15,
+
+	/*VHT hightest rate*/
+	.maps[RTL_RC_VHT_RATE_1SS_MCS7] = DESC_RATEVHT1SS_MCS7,
+	.maps[RTL_RC_VHT_RATE_1SS_MCS8] = DESC_RATEVHT1SS_MCS8,
+	.maps[RTL_RC_VHT_RATE_1SS_MCS9] = DESC_RATEVHT1SS_MCS9,
+	.maps[RTL_RC_VHT_RATE_2SS_MCS7] = DESC_RATEVHT2SS_MCS7,
+	.maps[RTL_RC_VHT_RATE_2SS_MCS8] = DESC_RATEVHT2SS_MCS8,
+	.maps[RTL_RC_VHT_RATE_2SS_MCS9] = DESC_RATEVHT2SS_MCS9,
+};
+
+static struct pci_device_id rtl8821ae_pci_ids[] = {
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8812, rtl8821ae_hal_cfg)},
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8821, rtl8821ae_hal_cfg)},
+	{},
+};
+
+MODULE_DEVICE_TABLE(pci, rtl8821ae_pci_ids);
+
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 8821ae 802.11ac PCI wireless");
+MODULE_FIRMWARE("rtlwifi/rtl8821aefw.bin");
+
+module_param_named(swenc, rtl8821ae_mod_params.sw_crypto, bool, 0444);
+module_param_named(debug, rtl8821ae_mod_params.debug, int, 0444);
+module_param_named(ips, rtl8821ae_mod_params.inactiveps, bool, 0444);
+module_param_named(swlps, rtl8821ae_mod_params.swctrl_lps, bool, 0444);
+module_param_named(fwlps, rtl8821ae_mod_params.fwctrl_lps, bool, 0444);
+module_param_named(msi, rtl8821ae_mod_params.msi_support, bool, 0444);
+module_param_named(disable_watchdog, rtl8821ae_mod_params.disable_watchdog,
+		   bool, 0444);
+module_param_named(int_clear, rtl8821ae_mod_params.int_clear, bool, 0444);
+MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
+MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
+MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
+MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
+MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
+MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
+MODULE_PARM_DESC(int_clear, "Set to 1 to disable interrupt clear before set (default 0)\n");
+
+static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
+
+static struct pci_driver rtl8821ae_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = rtl8821ae_pci_ids,
+	.probe = rtl_pci_probe,
+	.remove = rtl_pci_disconnect,
+	.driver.pm = &rtlwifi_pm_ops,
+};
+
+module_pci_driver(rtl8821ae_driver);