Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...

1 files changed, 37 insertions, 9 deletions

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
index e545e849f5a3..b0e0c642302c 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014 - 2015 Jes Sorensen <Jes.Sorensen@redhat.com>
+ * Copyright (c) 2014 - 2016 Jes Sorensen <Jes.Sorensen@redhat.com>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
@@ -109,6 +109,9 @@
 #define  AFE_XTAL_GATE_DIG		BIT(17)
 #define  AFE_XTAL_BT_GATE		BIT(20)
 
+/*
+ * 0x0028 is also known as REG_AFE_CTRL2 on 8723bu/8192eu
+ */
 #define REG_AFE_PLL_CTRL		0x0028
 #define  AFE_PLL_ENABLE			BIT(0)
 #define  AFE_PLL_320_ENABLE		BIT(1)
@@ -192,6 +195,7 @@
 						   control */
 #define  MULTI_GPS_FUNC_EN		BIT(22)	/* GPS function enable */
 
+#define REG_AFE_CTRL4			0x0078	/* 8192eu/8723bu */
 #define REG_LDO_SW_CTRL			0x007c	/* 8192eu */
 
 #define REG_MCU_FW_DL			0x0080
@@ -383,7 +387,7 @@
 #define REG_RQPN			0x0200
 #define  RQPN_HI_PQ_SHIFT		0
 #define  RQPN_LO_PQ_SHIFT		8
-#define  RQPN_NORM_PQ_SHIFT		16
+#define  RQPN_PUB_PQ_SHIFT		16
 #define  RQPN_LOAD			BIT(31)
 
 #define REG_FIFOPAGE			0x0204
@@ -417,13 +421,20 @@
 
 /*  spec version 11 */
 /* 0x0400 ~ 0x047F	Protocol Configuration */
-#define REG_VOQ_INFORMATION		0x0400
-#define REG_VIQ_INFORMATION		0x0404
-#define REG_BEQ_INFORMATION		0x0408
-#define REG_BKQ_INFORMATION		0x040c
-#define REG_MGQ_INFORMATION		0x0410
-#define REG_HGQ_INFORMATION		0x0414
-#define REG_BCNQ_INFORMATION		0x0418
+/* 8192c, 8192d */
+#define REG_VOQ_INFO			0x0400
+#define REG_VIQ_INFO			0x0404
+#define REG_BEQ_INFO			0x0408
+#define REG_BKQ_INFO			0x040c
+/* 8188e, 8723a, 8812a, 8821a, 8192e, 8723b */
+#define REG_Q0_INFO			0x400
+#define REG_Q1_INFO			0x404
+#define REG_Q2_INFO			0x408
+#define REG_Q3_INFO			0x40c
+
+#define REG_MGQ_INFO			0x0410
+#define REG_HGQ_INFO			0x0414
+#define REG_BCNQ_INFO			0x0418
 
 #define REG_CPU_MGQ_INFORMATION		0x041c
 #define REG_FWHW_TXQ_CTRL		0x0420
@@ -494,6 +505,9 @@
 #define REG_DATA_SUBCHANNEL		0x0483
 /* 8723au */
 #define REG_INIDATA_RATE_SEL		0x0484
+/* MACID_SLEEP_1/3 for 8723b, 8192e, 8812a, 8821a */
+#define REG_MACID_SLEEP_3_8732B		0x0484
+#define REG_MACID_SLEEP_1_8732B		0x0488
 
 #define REG_POWER_STATUS		0x04a4
 #define REG_POWER_STAGE1		0x04b4
@@ -502,12 +516,20 @@
 #define REG_PKT_VO_VI_LIFE_TIME		0x04c0
 #define REG_PKT_BE_BK_LIFE_TIME		0x04c2
 #define REG_STBC_SETTING		0x04c4
+#define REG_QUEUE_CTRL			0x04c6
 #define REG_HT_SINGLE_AMPDU_8723B	0x04c7
 #define REG_PROT_MODE_CTRL		0x04c8
 #define REG_MAX_AGGR_NUM		0x04ca
 #define REG_RTS_MAX_AGGR_NUM		0x04cb
 #define REG_BAR_MODE_CTRL		0x04cc
 #define REG_RA_TRY_RATE_AGG_LMT		0x04cf
+/* MACID_DROP for 8723a */
+#define REG_MACID_DROP_8732A		0x04d0
+/* EARLY_MODE_CONTROL 8188e */
+#define REG_EARLY_MODE_CONTROL_8188E	0x04d0
+/* MACID_SLEEP_2 for 8723b, 8192e, 8812a, 8821a */
+#define REG_MACID_SLEEP_2_8732B		0x04d0
+#define REG_MACID_SLEEP			0x04d4
 #define REG_NQOS_SEQ			0x04dc
 #define REG_QOS_SEQ			0x04de
 #define REG_NEED_CPU_HANDLE		0x04e0
@@ -860,6 +882,10 @@
 #define  CCK0_SIDEBAND			BIT(4)
 
 #define REG_CCK0_AFE_SETTING		0x0a04
+#define  CCK0_AFE_RX_MASK		0x0f000000
+#define  CCK0_AFE_RX_ANT_AB		BIT(24)
+#define  CCK0_AFE_RX_ANT_A		0
+#define  CCK0_AFE_RX_ANT_B		(BIT(24) | BIT(26))
 
 #define REG_CONFIG_ANT_A		0x0b68
 #define REG_CONFIG_ANT_B		0x0b6c
@@ -1026,6 +1052,7 @@
 #define  USB_HIMR_ROK			BIT(0)	/*  Receive DMA OK Interrupt */
 
 #define REG_USB_SPECIAL_OPTION		0xfe55
+#define REG_USB_HRPWM			0xfe58
 #define REG_USB_DMA_AGG_TO		0xfe5b
 #define REG_USB_AGG_TO			0xfe5c
 #define REG_USB_AGG_TH			0xfe5d
@@ -1111,6 +1138,7 @@
 #define RF6052_REG_T_METER_8723B	0x42
 #define RF6052_REG_UNKNOWN_43		0x43
 #define RF6052_REG_UNKNOWN_55		0x55
+#define RF6052_REG_UNKNOWN_56		0x56
 #define RF6052_REG_S0S1			0xb0
 #define RF6052_REG_UNKNOWN_DF		0xdf
 #define RF6052_REG_UNKNOWN_ED		0xed