Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...

6 files changed, 88 insertions, 61 deletions

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 7fa0128de7e3..bf3f0a39908c 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -777,7 +777,7 @@ static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2)
 	u8 offset1;
 	u8 offset2;
 
-	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) {
 		rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom);
 		offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0);
 		offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1);
@@ -1174,7 +1174,7 @@ static void rt2800_brightness_set(struct led_classdev *led_cdev,
 	    container_of(led_cdev, struct rt2x00_led, led_dev);
 	unsigned int enabled = brightness != LED_OFF;
 	unsigned int bg_mode =
-	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+	    (enabled && led->rt2x00dev->curr_band == NL80211_BAND_2GHZ);
 	unsigned int polarity =
 		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
 				   EEPROM_FREQ_LED_POLARITY);
@@ -1741,7 +1741,7 @@ static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev)
 	u8 led_ctrl, led_g_mode, led_r_mode;
 
 	rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
-	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
 		rt2x00_set_field32(&reg, GPIO_SWITCH_0, 1);
 		rt2x00_set_field32(&reg, GPIO_SWITCH_1, 1);
 	} else {
@@ -1844,7 +1844,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
 		    rt2x00_has_cap_bt_coexist(rt2x00dev)) {
 			rt2x00_set_field8(&r3, BBP3_RX_ADC, 1);
 			rt2x00_set_field8(&r3, BBP3_RX_ANTENNA,
-				rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+				rt2x00dev->curr_band == NL80211_BAND_5GHZ);
 			rt2800_set_ant_diversity(rt2x00dev, ANTENNA_B);
 		} else {
 			rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
@@ -3451,7 +3451,7 @@ static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
 	 * Matching Delta value   -4   -3   -2   -1    0   +1   +2   +3   +4
 	 * Example TSSI bounds  0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00
 	 */
-	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) {
 		rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1, &eeprom);
 		tssi_bounds[0] = rt2x00_get_field16(eeprom,
 					EEPROM_TSSI_BOUND_BG1_MINUS4);
@@ -3546,7 +3546,7 @@ static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
 }
 
 static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
-				      enum ieee80211_band band)
+				      enum nl80211_band band)
 {
 	u16 eeprom;
 	u8 comp_en;
@@ -3562,7 +3562,7 @@ static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
 	    !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
 		return 0;
 
-	if (band == IEEE80211_BAND_2GHZ) {
+	if (band == NL80211_BAND_2GHZ) {
 		comp_en = rt2x00_get_field16(eeprom,
 				 EEPROM_TXPOWER_DELTA_ENABLE_2G);
 		if (comp_en) {
@@ -3611,7 +3611,7 @@ static int rt2800_get_txpower_reg_delta(struct rt2x00_dev *rt2x00dev,
 }
 
 static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
-				   enum ieee80211_band band, int power_level,
+				   enum nl80211_band band, int power_level,
 				   u8 txpower, int delta)
 {
 	u16 eeprom;
@@ -3639,7 +3639,7 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
 		rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER,
 				   &eeprom);
 
-		if (band == IEEE80211_BAND_2GHZ)
+		if (band == NL80211_BAND_2GHZ)
 			eirp_txpower_criterion = rt2x00_get_field16(eeprom,
 						 EEPROM_EIRP_MAX_TX_POWER_2GHZ);
 		else
@@ -3686,7 +3686,7 @@ static void rt2800_config_txpower_rt3593(struct rt2x00_dev *rt2x00dev,
 	u16 eeprom;
 	u32 regs[TX_PWR_CFG_IDX_COUNT];
 	unsigned int offset;
-	enum ieee80211_band band = chan->band;
+	enum nl80211_band band = chan->band;
 	int delta;
 	int i;
 
@@ -3697,7 +3697,7 @@ static void rt2800_config_txpower_rt3593(struct rt2x00_dev *rt2x00dev,
 	/* calculate temperature compensation delta */
 	delta = rt2800_get_gain_calibration_delta(rt2x00dev);
 
-	if (band == IEEE80211_BAND_5GHZ)
+	if (band == NL80211_BAND_5GHZ)
 		offset = 16;
 	else
 		offset = 0;
@@ -4055,7 +4055,7 @@ static void rt2800_config_txpower_rt3593(struct rt2x00_dev *rt2x00dev,
 	for (i = 0; i < TX_PWR_CFG_IDX_COUNT; i++)
 		rt2x00_dbg(rt2x00dev,
 			   "band:%cGHz, BW:%c0MHz, TX_PWR_CFG_%d%s = %08lx\n",
-			   (band == IEEE80211_BAND_5GHZ) ? '5' : '2',
+			   (band == NL80211_BAND_5GHZ) ? '5' : '2',
 			   (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) ?
 								'4' : '2',
 			   (i > TX_PWR_CFG_9_IDX) ?
@@ -4081,7 +4081,7 @@ static void rt2800_config_txpower_rt28xx(struct rt2x00_dev *rt2x00dev,
 	u16 eeprom;
 	u32 reg, offset;
 	int i, is_rate_b, delta, power_ctrl;
-	enum ieee80211_band band = chan->band;
+	enum nl80211_band band = chan->band;
 
 	/*
 	 * Calculate HT40 compensation. For 40MHz we need to add or subtract
@@ -4436,7 +4436,7 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
 {
 	u8 vgc;
 
-	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_2GHZ) {
 		if (rt2x00_rt(rt2x00dev, RT3070) ||
 		    rt2x00_rt(rt2x00dev, RT3071) ||
 		    rt2x00_rt(rt2x00dev, RT3090) ||
@@ -4511,7 +4511,7 @@ void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
 	case RT3572:
 	case RT3593:
 		if (qual->rssi > -65) {
-			if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
+			if (rt2x00dev->curr_band == NL80211_BAND_2GHZ)
 				vgc += 0x20;
 			else
 				vgc += 0x10;
@@ -7492,6 +7492,10 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	if (!rt2x00_is_usb(rt2x00dev))
 		ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING);
 
+	/* Set MFP if HW crypto is disabled. */
+	if (rt2800_hwcrypt_disabled(rt2x00dev))
+		ieee80211_hw_set(rt2x00dev->hw, MFP_CAPABLE);
+
 	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
 				rt2800_eeprom_addr(rt2x00dev,
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
index 6418620f95ff..f68d492129c6 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -38,6 +38,7 @@
 #include <linux/kfifo.h>
 #include <linux/hrtimer.h>
 #include <linux/average.h>
+#include <linux/usb.h>
 
 #include <net/mac80211.h>
 
@@ -752,8 +753,8 @@ struct rt2x00_dev {
 	 * IEEE80211 control structure.
 	 */
 	struct ieee80211_hw *hw;
-	struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
-	enum ieee80211_band curr_band;
+	struct ieee80211_supported_band bands[NUM_NL80211_BANDS];
+	enum nl80211_band curr_band;
 	int curr_freq;
 
 	/*
@@ -1002,6 +1003,8 @@ struct rt2x00_dev {
 
 	/* Extra TX headroom required for alignment purposes. */
 	unsigned int extra_tx_headroom;
+
+	struct usb_anchor *anchor;
 };
 
 struct rt2x00_bar_list_entry {
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index 5639ed816813..4e0c5653054b 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -911,7 +911,7 @@ static void rt2x00lib_channel(struct ieee80211_channel *entry,
 			      const int value)
 {
 	/* XXX: this assumption about the band is wrong for 802.11j */
-	entry->band = channel <= 14 ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+	entry->band = channel <= 14 ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ;
 	entry->center_freq = ieee80211_channel_to_frequency(channel,
 							    entry->band);
 	entry->hw_value = value;
@@ -975,13 +975,13 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 	 * Channels: 2.4 GHz
 	 */
 	if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
-		rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
-		rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
-		rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
-		rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
-		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-		    &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
-		memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
+		rt2x00dev->bands[NL80211_BAND_2GHZ].n_channels = 14;
+		rt2x00dev->bands[NL80211_BAND_2GHZ].n_bitrates = num_rates;
+		rt2x00dev->bands[NL80211_BAND_2GHZ].channels = channels;
+		rt2x00dev->bands[NL80211_BAND_2GHZ].bitrates = rates;
+		hw->wiphy->bands[NL80211_BAND_2GHZ] =
+		    &rt2x00dev->bands[NL80211_BAND_2GHZ];
+		memcpy(&rt2x00dev->bands[NL80211_BAND_2GHZ].ht_cap,
 		       &spec->ht, sizeof(spec->ht));
 	}
 
@@ -991,15 +991,15 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 	 * Channels: OFDM, UNII, HiperLAN2.
 	 */
 	if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
-		rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
+		rt2x00dev->bands[NL80211_BAND_5GHZ].n_channels =
 		    spec->num_channels - 14;
-		rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
+		rt2x00dev->bands[NL80211_BAND_5GHZ].n_bitrates =
 		    num_rates - 4;
-		rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
-		rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
-		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-		    &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
-		memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
+		rt2x00dev->bands[NL80211_BAND_5GHZ].channels = &channels[14];
+		rt2x00dev->bands[NL80211_BAND_5GHZ].bitrates = &rates[4];
+		hw->wiphy->bands[NL80211_BAND_5GHZ] =
+		    &rt2x00dev->bands[NL80211_BAND_5GHZ];
+		memcpy(&rt2x00dev->bands[NL80211_BAND_5GHZ].ht_cap,
 		       &spec->ht, sizeof(spec->ht));
 	}
 
@@ -1016,11 +1016,11 @@ static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
 	if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
 		ieee80211_unregister_hw(rt2x00dev->hw);
 
-	if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
-		kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
-		kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates);
-		rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
-		rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
+	if (likely(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ])) {
+		kfree(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels);
+		kfree(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ]->bitrates);
+		rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL;
+		rt2x00dev->hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL;
 	}
 
 	kfree(rt2x00dev->spec.channels_info);
@@ -1422,11 +1422,14 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	cancel_work_sync(&rt2x00dev->intf_work);
 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
 	cancel_work_sync(&rt2x00dev->sleep_work);
+#ifdef CONFIG_RT2X00_LIB_USB
 	if (rt2x00_is_usb(rt2x00dev)) {
+		usb_kill_anchored_urbs(rt2x00dev->anchor);
 		hrtimer_cancel(&rt2x00dev->txstatus_timer);
 		cancel_work_sync(&rt2x00dev->rxdone_work);
 		cancel_work_sync(&rt2x00dev->txdone_work);
 	}
+#endif
 	if (rt2x00dev->workqueue)
 		destroy_workqueue(rt2x00dev->workqueue);
 
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
index 7627af6098eb..7cf26c6124d1 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
@@ -171,8 +171,11 @@ static void rt2x00usb_register_read_async_cb(struct urb *urb)
 {
 	struct rt2x00_async_read_data *rd = urb->context;
 	if (rd->callback(rd->rt2x00dev, urb->status, le32_to_cpu(rd->reg))) {
-		if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
+		usb_anchor_urb(urb, rd->rt2x00dev->anchor);
+		if (usb_submit_urb(urb, GFP_ATOMIC) < 0) {
+			usb_unanchor_urb(urb);
 			kfree(rd);
+		}
 	} else
 		kfree(rd);
 }
@@ -206,8 +209,11 @@ void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
 	usb_fill_control_urb(urb, usb_dev, usb_rcvctrlpipe(usb_dev, 0),
 			     (unsigned char *)(&rd->cr), &rd->reg, sizeof(rd->reg),
 			     rt2x00usb_register_read_async_cb, rd);
-	if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
+	usb_anchor_urb(urb, rt2x00dev->anchor);
+	if (usb_submit_urb(urb, GFP_ATOMIC) < 0) {
+		usb_unanchor_urb(urb);
 		kfree(rd);
+	}
 	usb_free_urb(urb);
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_register_read_async);
@@ -313,8 +319,10 @@ static bool rt2x00usb_kick_tx_entry(struct queue_entry *entry, void *data)
 			  entry->skb->data, length,
 			  rt2x00usb_interrupt_txdone, entry);
 
+	usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
 	status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
 	if (status) {
+		usb_unanchor_urb(entry_priv->urb);
 		if (status == -ENODEV)
 			clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 		set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
@@ -402,8 +410,10 @@ static bool rt2x00usb_kick_rx_entry(struct queue_entry *entry, void *data)
 			  entry->skb->data, entry->skb->len,
 			  rt2x00usb_interrupt_rxdone, entry);
 
+	usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
 	status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
 	if (status) {
+		usb_unanchor_urb(entry_priv->urb);
 		if (status == -ENODEV)
 			clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 		set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
@@ -818,6 +828,13 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
 	if (retval)
 		goto exit_free_reg;
 
+	rt2x00dev->anchor = devm_kmalloc(&usb_dev->dev,
+					sizeof(struct usb_anchor),
+					GFP_KERNEL);
+	if (!rt2x00dev->anchor)
+		goto exit_free_reg;
+
+	init_usb_anchor(rt2x00dev->anchor);
 	return 0;
 
 exit_free_reg:
diff --git a/drivers/net/wireless/ralink/rt2x00/rt61pci.c b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
index 24a3436ef952..03013eb2f642 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
@@ -252,9 +252,9 @@ static void rt61pci_brightness_set(struct led_classdev *led_cdev,
 	    container_of(led_cdev, struct rt2x00_led, led_dev);
 	unsigned int enabled = brightness != LED_OFF;
 	unsigned int a_mode =
-	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+	    (enabled && led->rt2x00dev->curr_band == NL80211_BAND_5GHZ);
 	unsigned int bg_mode =
-	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+	    (enabled && led->rt2x00dev->curr_band == NL80211_BAND_2GHZ);
 
 	if (led->type == LED_TYPE_RADIO) {
 		rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
@@ -643,12 +643,12 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 	case ANTENNA_HW_DIVERSITY:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 		rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
-				  (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ));
+				  (rt2x00dev->curr_band != NL80211_BAND_5GHZ));
 		break;
 	case ANTENNA_A:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 		rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-		if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
+		if (rt2x00dev->curr_band == NL80211_BAND_5GHZ)
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 		else
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
@@ -657,7 +657,7 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 	default:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 		rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-		if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
+		if (rt2x00dev->curr_band == NL80211_BAND_5GHZ)
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 		else
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
@@ -808,7 +808,7 @@ static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev,
 	BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 	       ant->tx == ANTENNA_SW_DIVERSITY);
 
-	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
 		sel = antenna_sel_a;
 		lna = rt2x00_has_cap_external_lna_a(rt2x00dev);
 	} else {
@@ -822,9 +822,9 @@ static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev,
 	rt2x00mmio_register_read(rt2x00dev, PHY_CSR0, &reg);
 
 	rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
-			   rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+			   rt2x00dev->curr_band == NL80211_BAND_2GHZ);
 	rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
-			   rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+			   rt2x00dev->curr_band == NL80211_BAND_5GHZ);
 
 	rt2x00mmio_register_write(rt2x00dev, PHY_CSR0, reg);
 
@@ -846,7 +846,7 @@ static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
 	u16 eeprom;
 	short lna_gain = 0;
 
-	if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) {
+	if (libconf->conf->chandef.chan->band == NL80211_BAND_2GHZ) {
 		if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
 			lna_gain += 14;
 
@@ -1048,7 +1048,7 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Determine r17 bounds.
 	 */
-	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
 		low_bound = 0x28;
 		up_bound = 0x48;
 		if (rt2x00_has_cap_external_lna_a(rt2x00dev)) {
@@ -2077,7 +2077,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 		return 0;
 	}
 
-	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
 		if (lna == 3 || lna == 2)
 			offset += 10;
 	}
diff --git a/drivers/net/wireless/ralink/rt2x00/rt73usb.c b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
index 7bbc86931168..c1397a6d3cee 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
@@ -197,9 +197,9 @@ static void rt73usb_brightness_set(struct led_classdev *led_cdev,
 	   container_of(led_cdev, struct rt2x00_led, led_dev);
 	unsigned int enabled = brightness != LED_OFF;
 	unsigned int a_mode =
-	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+	    (enabled && led->rt2x00dev->curr_band == NL80211_BAND_5GHZ);
 	unsigned int bg_mode =
-	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+	    (enabled && led->rt2x00dev->curr_band == NL80211_BAND_2GHZ);
 
 	if (led->type == LED_TYPE_RADIO) {
 		rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
@@ -593,13 +593,13 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 	case ANTENNA_HW_DIVERSITY:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 		temp = !rt2x00_has_cap_frame_type(rt2x00dev) &&
-		       (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ);
+		       (rt2x00dev->curr_band != NL80211_BAND_5GHZ);
 		rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
 		break;
 	case ANTENNA_A:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 		rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-		if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
+		if (rt2x00dev->curr_band == NL80211_BAND_5GHZ)
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 		else
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
@@ -608,7 +608,7 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 	default:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 		rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-		if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
+		if (rt2x00dev->curr_band == NL80211_BAND_5GHZ)
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 		else
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
@@ -704,7 +704,7 @@ static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev,
 	BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 	       ant->tx == ANTENNA_SW_DIVERSITY);
 
-	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
 		sel = antenna_sel_a;
 		lna = rt2x00_has_cap_external_lna_a(rt2x00dev);
 	} else {
@@ -718,9 +718,9 @@ static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev,
 	rt2x00usb_register_read(rt2x00dev, PHY_CSR0, &reg);
 
 	rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
-			   (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ));
+			   (rt2x00dev->curr_band == NL80211_BAND_2GHZ));
 	rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
-			   (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ));
+			   (rt2x00dev->curr_band == NL80211_BAND_5GHZ));
 
 	rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg);
 
@@ -736,7 +736,7 @@ static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
 	u16 eeprom;
 	short lna_gain = 0;
 
-	if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) {
+	if (libconf->conf->chandef.chan->band == NL80211_BAND_2GHZ) {
 		if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
 			lna_gain += 14;
 
@@ -923,7 +923,7 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Determine r17 bounds.
 	 */
-	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
 		low_bound = 0x28;
 		up_bound = 0x48;
 
@@ -1657,7 +1657,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 		return 0;
 	}
 
-	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
 		if (rt2x00_has_cap_external_lna_a(rt2x00dev)) {
 			if (lna == 3 || lna == 2)
 				offset += 10;