diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-05-18 02:26:30 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-05-18 02:26:30 +0300 |
commit | a7fd20d1c476af4563e66865213474a2f9f473a4 (patch) | |
tree | fb1399e2f82842450245fb058a8fb23c52865f43 /drivers/net/wireless/ralink/rt2x00/rt73usb.c | |
parent | b80fed9595513384424cd141923c9161c4b5021b (diff) | |
parent | 917fa5353da05e8a0045b8acacba8d50400d5b12 (diff) | |
download | linux-a7fd20d1c476af4563e66865213474a2f9f473a4.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Highlights:
1) Support SPI based w5100 devices, from Akinobu Mita.
2) Partial Segmentation Offload, from Alexander Duyck.
3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.
4) Allow cls_flower stats offload, from Amir Vadai.
5) Implement bpf blinding, from Daniel Borkmann.
6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
actually using FASYNC these atomics are superfluous. From Eric
Dumazet.
7) Run TCP more preemptibly, also from Eric Dumazet.
8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
driver, from Gal Pressman.
9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.
10) Improve BPF usage documentation, from Jesper Dangaard Brouer.
11) Support tunneling offloads in qed, from Manish Chopra.
12) aRFS offloading in mlx5e, from Maor Gottlieb.
13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
Leitner.
14) Add MSG_EOR support to TCP, this allows controlling packet
coalescing on application record boundaries for more accurate
socket timestamp sampling. From Martin KaFai Lau.
15) Fix alignment of 64-bit netlink attributes across the board, from
Nicolas Dichtel.
16) Per-vlan stats in bridging, from Nikolay Aleksandrov.
17) Several conversions of drivers to ethtool ksettings, from Philippe
Reynes.
18) Checksum neutral ILA in ipv6, from Tom Herbert.
19) Factorize all of the various marvell dsa drivers into one, from
Vivien Didelot
20) Add VF support to qed driver, from Yuval Mintz"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
Revert "phy dp83867: Make rgmii parameters optional"
r8169: default to 64-bit DMA on recent PCIe chips
phy dp83867: Make rgmii parameters optional
phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
bpf: arm64: remove callee-save registers use for tmp registers
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
switchdev: pass pointer to fib_info instead of copy
net_sched: close another race condition in tcf_mirred_release()
tipc: fix nametable publication field in nl compat
drivers: net: Don't print unpopulated net_device name
qed: add support for dcbx.
ravb: Add missing free_irq() calls to ravb_close()
qed: Remove a stray tab
net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fec-mpc52xx: use phydev from struct net_device
bpf, doc: fix typo on bpf_asm descriptions
stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fs-enet: use phydev from struct net_device
...
Diffstat (limited to 'drivers/net/wireless/ralink/rt2x00/rt73usb.c')
-rw-r--r-- | drivers/net/wireless/ralink/rt2x00/rt73usb.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/drivers/net/wireless/ralink/rt2x00/rt73usb.c b/drivers/net/wireless/ralink/rt2x00/rt73usb.c index 7bbc86931168..c1397a6d3cee 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c +++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c @@ -197,9 +197,9 @@ static void rt73usb_brightness_set(struct led_classdev *led_cdev, container_of(led_cdev, struct rt2x00_led, led_dev); unsigned int enabled = brightness != LED_OFF; unsigned int a_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); + (enabled && led->rt2x00dev->curr_band == NL80211_BAND_5GHZ); unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); + (enabled && led->rt2x00dev->curr_band == NL80211_BAND_2GHZ); if (led->type == LED_TYPE_RADIO) { rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, @@ -593,13 +593,13 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); temp = !rt2x00_has_cap_frame_type(rt2x00dev) && - (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ); + (rt2x00dev->curr_band != NL80211_BAND_5GHZ); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp); break; case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) + if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); @@ -608,7 +608,7 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) + if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); @@ -704,7 +704,7 @@ static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev, BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || ant->tx == ANTENNA_SW_DIVERSITY); - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { + if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) { sel = antenna_sel_a; lna = rt2x00_has_cap_external_lna_a(rt2x00dev); } else { @@ -718,9 +718,9 @@ static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev, rt2x00usb_register_read(rt2x00dev, PHY_CSR0, ®); rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, - (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)); + (rt2x00dev->curr_band == NL80211_BAND_2GHZ)); rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, - (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)); + (rt2x00dev->curr_band == NL80211_BAND_5GHZ)); rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg); @@ -736,7 +736,7 @@ static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, u16 eeprom; short lna_gain = 0; - if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) { + if (libconf->conf->chandef.chan->band == NL80211_BAND_2GHZ) { if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) lna_gain += 14; @@ -923,7 +923,7 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev, /* * Determine r17 bounds. */ - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { + if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) { low_bound = 0x28; up_bound = 0x48; @@ -1657,7 +1657,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return 0; } - if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { + if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) { if (rt2x00_has_cap_external_lna_a(rt2x00dev)) { if (lna == 3 || lna == 2) offset += 10; |