Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...

1 files changed, 189 insertions, 13 deletions

diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index 6eafc15e0065..a8242f678496 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -19,7 +19,7 @@
 
 #include <linux/ieee80211.h>
 
-#define QLINK_PROTO_VER		3
+#define QLINK_PROTO_VER		5
 
 #define QLINK_MACID_RSVD		0xFF
 #define QLINK_VIFID_RSVD		0xFF
@@ -77,6 +77,7 @@ enum qlink_iface_type {
 	QLINK_IFTYPE_ADHOC	= 3,
 	QLINK_IFTYPE_MONITOR	= 4,
 	QLINK_IFTYPE_WDS	= 5,
+	QLINK_IFTYPE_AP_VLAN	= 6,
 };
 
 /**
@@ -85,12 +86,12 @@ enum qlink_iface_type {
  * Data describing a single virtual interface.
  *
  * @if_type: Mode of interface operation, one of &enum qlink_iface_type
- * @flags: interface flagsmap.
+ * @vlanid: VLAN ID for AP_VLAN interface type
  * @mac_addr: MAC address of virtual interface.
  */
 struct qlink_intf_info {
 	__le16 if_type;
-	__le16 flags;
+	__le16 vlanid;
 	u8 mac_addr[ETH_ALEN];
 	u8 rsvd[2];
 } __packed;
@@ -133,6 +134,9 @@ enum qlink_channel_width {
  *	number of operational channels and information on each of the channel.
  *	This command is generic to a specified MAC, interface index must be set
  *	to QLINK_VIFID_RSVD in command header.
+ * @QLINK_CMD_REG_NOTIFY: notify device about regulatory domain change. This
+ *	command is supported only if device reports QLINK_HW_SUPPORTS_REG_UPDATE
+ *	capability.
  */
 enum qlink_cmd_type {
 	QLINK_CMD_FW_INIT		= 0x0001,
@@ -148,8 +152,9 @@ enum qlink_cmd_type {
 	QLINK_CMD_DEL_INTF		= 0x0016,
 	QLINK_CMD_CHANGE_INTF		= 0x0017,
 	QLINK_CMD_UPDOWN_INTF		= 0x0018,
-	QLINK_CMD_REG_REGION		= 0x0019,
+	QLINK_CMD_REG_NOTIFY		= 0x0019,
 	QLINK_CMD_CHANS_INFO_GET	= 0x001A,
+	QLINK_CMD_CHAN_SWITCH		= 0x001B,
 	QLINK_CMD_CONFIG_AP		= 0x0020,
 	QLINK_CMD_START_AP		= 0x0021,
 	QLINK_CMD_STOP_AP		= 0x0022,
@@ -161,6 +166,7 @@ enum qlink_cmd_type {
 	QLINK_CMD_CHANGE_STA		= 0x0051,
 	QLINK_CMD_DEL_STA		= 0x0052,
 	QLINK_CMD_SCAN			= 0x0053,
+	QLINK_CMD_CHAN_STATS		= 0x0054,
 	QLINK_CMD_CONNECT		= 0x0060,
 	QLINK_CMD_DISCONNECT		= 0x0061,
 };
@@ -287,6 +293,7 @@ struct qlink_cmd_get_sta_info {
  * @pairwise: whether to use pairwise key.
  * @addr: MAC address of a STA key is being installed to.
  * @cipher: cipher suite.
+ * @vlanid: VLAN ID for AP_VLAN interface type
  * @key_data: key data itself.
  */
 struct qlink_cmd_add_key {
@@ -295,6 +302,7 @@ struct qlink_cmd_add_key {
 	u8 pairwise;
 	u8 addr[ETH_ALEN];
 	__le32 cipher;
+	__le16 vlanid;
 	u8 key_data[0];
 } __packed;
 
@@ -341,12 +349,16 @@ struct qlink_cmd_set_def_mgmt_key {
  *
  * @sta_flags_mask: STA flags mask, bitmap of &enum qlink_sta_flags
  * @sta_flags_set: STA flags values, bitmap of &enum qlink_sta_flags
+ * @if_type: Mode of interface operation, one of &enum qlink_iface_type
+ * @vlanid: VLAN ID to assign to specific STA
  * @sta_addr: address of the STA for which parameters are set.
  */
 struct qlink_cmd_change_sta {
 	struct qlink_cmd chdr;
 	__le32 sta_flags_mask;
 	__le32 sta_flags_set;
+	__le16 if_type;
+	__le16 vlanid;
 	u8 sta_addr[ETH_ALEN];
 } __packed;
 
@@ -380,7 +392,7 @@ enum qlink_sta_connect_flags {
 struct qlink_cmd_connect {
 	struct qlink_cmd chdr;
 	__le32 flags;
-	__le16 freq;
+	__le16 channel;
 	__le16 bg_scan_period;
 	u8 bssid[ETH_ALEN];
 	u8 payload[0];
@@ -430,6 +442,70 @@ struct qlink_cmd_chans_info_get {
 	u8 band;
 } __packed;
 
+/**
+ * struct qlink_cmd_get_chan_stats - data for QLINK_CMD_CHAN_STATS command
+ *
+ * @channel: channel number according to 802.11 17.3.8.3.2 and Annex J
+ */
+struct qlink_cmd_get_chan_stats {
+	struct qlink_cmd chdr;
+	__le16 channel;
+} __packed;
+
+/**
+ * enum qlink_reg_initiator - Indicates the initiator of a reg domain request
+ *
+ * See &enum nl80211_reg_initiator for more info.
+ */
+enum qlink_reg_initiator {
+	QLINK_REGDOM_SET_BY_CORE,
+	QLINK_REGDOM_SET_BY_USER,
+	QLINK_REGDOM_SET_BY_DRIVER,
+	QLINK_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum qlink_user_reg_hint_type - type of user regulatory hint
+ *
+ * See &enum nl80211_user_reg_hint_type for more info.
+ */
+enum qlink_user_reg_hint_type {
+	QLINK_USER_REG_HINT_USER	= 0,
+	QLINK_USER_REG_HINT_CELL_BASE	= 1,
+	QLINK_USER_REG_HINT_INDOOR	= 2,
+};
+
+/**
+ * struct qlink_cmd_reg_notify - data for QLINK_CMD_REG_NOTIFY command
+ *
+ * @alpha2: the ISO / IEC 3166 alpha2 country code.
+ * @initiator: which entity sent the request, one of &enum qlink_reg_initiator.
+ * @user_reg_hint_type: type of hint for QLINK_REGDOM_SET_BY_USER request, one
+ *	of &enum qlink_user_reg_hint_type.
+ */
+struct qlink_cmd_reg_notify {
+	struct qlink_cmd chdr;
+	u8 alpha2[2];
+	u8 initiator;
+	u8 user_reg_hint_type;
+} __packed;
+
+/**
+ * struct qlink_cmd_chan_switch - data for QLINK_CMD_CHAN_SWITCH command
+ *
+ * @channel: channel number according to 802.11 17.3.8.3.2 and Annex J
+ * @radar_required: whether radar detection is required on the new channel
+ * @block_tx: whether transmissions should be blocked while changing
+ * @beacon_count: number of beacons until switch
+ */
+struct qlink_cmd_chan_switch {
+	struct qlink_cmd chdr;
+	__le16 channel;
+	u8 radar_required;
+	u8 block_tx;
+	u8 beacon_count;
+} __packed;
+
 /* QLINK Command Responses messages related definitions
  */
 
@@ -438,6 +514,7 @@ enum qlink_cmd_result {
 	QLINK_CMD_RESULT_INVALID,
 	QLINK_CMD_RESULT_ENOTSUPP,
 	QLINK_CMD_RESULT_ENOTFOUND,
+	QLINK_CMD_RESULT_EALREADY,
 };
 
 /**
@@ -497,6 +574,18 @@ struct qlink_resp_get_mac_info {
 } __packed;
 
 /**
+ * enum qlink_dfs_regions - regulatory DFS regions
+ *
+ * Corresponds to &enum nl80211_dfs_regions.
+ */
+enum qlink_dfs_regions {
+	QLINK_DFS_UNSET	= 0,
+	QLINK_DFS_FCC	= 1,
+	QLINK_DFS_ETSI	= 2,
+	QLINK_DFS_JP	= 3,
+};
+
+/**
  * struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command
  *
  * Description of wireless hardware capabilities and features.
@@ -504,22 +593,29 @@ struct qlink_resp_get_mac_info {
  * @fw_ver: wireless hardware firmware version.
  * @hw_capab: Bitmap of capabilities supported by firmware.
  * @ql_proto_ver: Version of QLINK protocol used by firmware.
- * @country_code: country code ID firmware is configured to.
  * @num_mac: Number of separate physical radio devices provided by hardware.
  * @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware.
  * @total_tx_chains: total number of transmit chains used by device.
  * @total_rx_chains: total number of receive chains.
+ * @alpha2: country code ID firmware is configured to.
+ * @n_reg_rules: number of regulatory rules TLVs in variable portion of the
+ *	message.
+ * @dfs_region: regulatory DFS region, one of @enum qlink_dfs_region.
+ * @info: variable-length HW info, can contain QTN_TLV_ID_REG_RULE.
  */
 struct qlink_resp_get_hw_info {
 	struct qlink_resp rhdr;
 	__le32 fw_ver;
 	__le32 hw_capab;
 	__le16 ql_proto_ver;
-	u8 alpha2_code[2];
 	u8 num_mac;
 	u8 mac_bitmap;
 	u8 total_tx_chain;
 	u8 total_rx_chain;
+	u8 alpha2[2];
+	u8 n_reg_rules;
+	u8 dfs_region;
+	u8 info[0];
 } __packed;
 
 /**
@@ -574,6 +670,16 @@ struct qlink_resp_phy_params {
 	u8 info[0];
 } __packed;
 
+/**
+ * struct qlink_resp_get_chan_stats - response for QLINK_CMD_CHAN_STATS cmd
+ *
+ * @info: variable-length channel info.
+ */
+struct qlink_resp_get_chan_stats {
+	struct qlink_cmd rhdr;
+	u8 info[0];
+} __packed;
+
 /* QLINK Events messages related definitions
  */
 
@@ -585,6 +691,7 @@ enum qlink_event_type {
 	QLINK_EVENT_SCAN_COMPLETE	= 0x0025,
 	QLINK_EVENT_BSS_JOIN		= 0x0026,
 	QLINK_EVENT_BSS_LEAVE		= 0x0027,
+	QLINK_EVENT_FREQ_CHANGE		= 0x0028,
 };
 
 /**
@@ -651,7 +758,17 @@ struct qlink_event_bss_join {
  */
 struct qlink_event_bss_leave {
 	struct qlink_event ehdr;
-	u16 reason;
+	__le16 reason;
+} __packed;
+
+/**
+ * struct qlink_event_freq_change - data for QLINK_EVENT_FREQ_CHANGE event
+ *
+ * @freq: new operating frequency in MHz
+ */
+struct qlink_event_freq_change {
+	struct qlink_event ehdr;
+	__le32 freq;
 } __packed;
 
 enum qlink_rxmgmt_flags {
@@ -741,10 +858,12 @@ enum qlink_tlv_id {
 	QTN_TLV_ID_LRETRY_LIMIT		= 0x0204,
 	QTN_TLV_ID_BCN_PERIOD		= 0x0205,
 	QTN_TLV_ID_DTIM			= 0x0206,
+	QTN_TLV_ID_REG_RULE		= 0x0207,
 	QTN_TLV_ID_CHANNEL		= 0x020F,
 	QTN_TLV_ID_COVERAGE_CLASS	= 0x0213,
 	QTN_TLV_ID_IFACE_LIMIT		= 0x0214,
 	QTN_TLV_ID_NUM_IFACE_COMB	= 0x0215,
+	QTN_TLV_ID_CHANNEL_STATS	= 0x0216,
 	QTN_TLV_ID_STA_BASIC_COUNTERS	= 0x0300,
 	QTN_TLV_ID_STA_GENERIC_INFO	= 0x0301,
 	QTN_TLV_ID_KEY			= 0x0302,
@@ -761,7 +880,7 @@ struct qlink_tlv_hdr {
 
 struct qlink_iface_limit {
 	__le16 max_num;
-	__le16 type_mask;
+	__le16 type;
 } __packed;
 
 struct qlink_iface_comb_num {
@@ -844,12 +963,54 @@ struct qlink_tlv_cclass {
 	u8 cclass;
 } __packed;
 
-enum qlink_dfs_state {
-	QLINK_DFS_USABLE,
-	QLINK_DFS_UNAVAILABLE,
-	QLINK_DFS_AVAILABLE,
+/**
+ * enum qlink_reg_rule_flags - regulatory rule flags
+ *
+ * See description of &enum nl80211_reg_rule_flags
+ */
+enum qlink_reg_rule_flags {
+	QLINK_RRF_NO_OFDM	= BIT(0),
+	QLINK_RRF_NO_CCK	= BIT(1),
+	QLINK_RRF_NO_INDOOR	= BIT(2),
+	QLINK_RRF_NO_OUTDOOR	= BIT(3),
+	QLINK_RRF_DFS		= BIT(4),
+	QLINK_RRF_PTP_ONLY	= BIT(5),
+	QLINK_RRF_PTMP_ONLY	= BIT(6),
+	QLINK_RRF_NO_IR		= BIT(7),
+	QLINK_RRF_AUTO_BW	= BIT(8),
+	QLINK_RRF_IR_CONCURRENT	= BIT(9),
+	QLINK_RRF_NO_HT40MINUS	= BIT(10),
+	QLINK_RRF_NO_HT40PLUS	= BIT(11),
+	QLINK_RRF_NO_80MHZ	= BIT(12),
+	QLINK_RRF_NO_160MHZ	= BIT(13),
 };
 
+/**
+ * struct qlink_tlv_reg_rule - data for QTN_TLV_ID_REG_RULE TLV
+ *
+ * Regulatory rule description.
+ *
+ * @start_freq_khz: start frequency of the range the rule is attributed to.
+ * @end_freq_khz: end frequency of the range the rule is attributed to.
+ * @max_bandwidth_khz: max bandwidth that channels in specified range can be
+ *	configured to.
+ * @max_antenna_gain: max antenna gain that can be used in the specified
+ *	frequency range, dBi.
+ * @max_eirp: maximum EIRP.
+ * @flags: regulatory rule flags in &enum qlink_reg_rule_flags.
+ * @dfs_cac_ms: DFS CAC period.
+ */
+struct qlink_tlv_reg_rule {
+	struct qlink_tlv_hdr hdr;
+	__le32 start_freq_khz;
+	__le32 end_freq_khz;
+	__le32 max_bandwidth_khz;
+	__le32 max_antenna_gain;
+	__le32 max_eirp;
+	__le32 flags;
+	__le32 dfs_cac_ms;
+} __packed;
+
 enum qlink_channel_flags {
 	QLINK_CHAN_DISABLED		= BIT(0),
 	QLINK_CHAN_NO_IR		= BIT(1),
@@ -865,6 +1026,12 @@ enum qlink_channel_flags {
 	QLINK_CHAN_NO_10MHZ		= BIT(12),
 };
 
+enum qlink_dfs_state {
+	QLINK_DFS_USABLE,
+	QLINK_DFS_UNAVAILABLE,
+	QLINK_DFS_AVAILABLE,
+};
+
 struct qlink_tlv_channel {
 	struct qlink_tlv_hdr hdr;
 	__le16 hw_value;
@@ -898,4 +1065,13 @@ struct qlink_auth_encr {
 	u8 control_port_no_encrypt;
 } __packed;
 
+struct qlink_chan_stats {
+	__le32 chan_num;
+	__le32 cca_tx;
+	__le32 cca_rx;
+	__le32 cca_busy;
+	__le32 cca_try;
+	s8 chan_noise;
+} __packed;
+
 #endif /* _QTN_QLINK_H_ */