Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David S Miller:

 1) Remove the ipv4 routing cache.  Now lookups go directly into the FIB
    trie and use prebuilt routes cached there.

    No more garbage collection, no more rDOS attacks on the routing
    cache.  Instead we now get predictable and consistent performance,
    no matter what the pattern of traffic we service.

    This has been almost 2 years in the making.  Special thanks to
    Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
    have helped along the way.

    I'm sure that with a change of this magnitude there will be some
    kind of fallout, but such things ought the be simple to fix at this
    point.  Luckily I'm not European so I'll be around all of August to
    fix things :-)

    The major stages of this work here are each fronted by a forced
    merge commit whose commit message contains a top-level description
    of the motivations and implementation issues.

 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
    input.

 3) TCP SYN/ACK performance tweaks from Eric Dumazet.

 4) Add namespace support for netfilter L4 conntrack helpers, from Gao
    Feng.

 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
    Yuval Mintz.

 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.

 7) Support for connection tracker helpers in userspace, from Pablo
    Neira Ayuso.

 8) Allow userspace driven TX load balancing functions in TEAM driver,
    from Jiri Pirko.

 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
    embedded gotos.

10) TCP Small Queues, essentially minimize the amount of TCP data queued
    up in the packet scheduler layer.  Whereas the existing BQL (Byte
    Queue Limits) limits the pkt_sched --> netdevice queuing levels,
    this controls the TCP --> pkt_sched queueing levels.

    From Eric Dumazet.

11) Reduce the number of get_page/put_page ops done on SKB fragments,
    from Alexander Duyck.

12) Implement protection against blind resets in TCP (RFC 5961), from
    Eric Dumazet.

13) Support the client side of TCP Fast Open, basically the ability to
    send data in the SYN exchange, from Yuchung Cheng.

    Basically, the sender queues up data with a sendmsg() call using
    MSG_FASTOPEN, then they do the connect() which emits the queued up
    fastopen data.

14) Avoid all the problems we get into in TCP when timers or PMTU events
    hit a locked socket.  The TCP Small Queues changes added a
    tcp_release_cb() that allows us to queue work up to the
    release_sock() caller, and that's what we use here too.  From Eric
    Dumazet.

15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
  genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
  r8169: revert "add byte queue limit support".
  ipv4: Change rt->rt_iif encoding.
  net: Make skb->skb_iif always track skb->dev
  ipv4: Prepare for change of rt->rt_iif encoding.
  ipv4: Remove all RTCF_DIRECTSRC handliing.
  ipv4: Really ignore ICMP address requests/replies.
  decnet: Don't set RTCF_DIRECTSRC.
  net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
  ipv4: Remove redundant assignment
  rds: set correct msg_namelen
  openvswitch: potential NULL deref in sample()
  tcp: dont drop MTU reduction indications
  bnx2x: Add new 57840 device IDs
  tcp: avoid oops in tcp_metrics and reset tcpm_stamp
  niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
  niu: Fix to check for dma mapping errors.
  net: Fix references to out-of-scope variables in put_cmsg_compat()
  net: ethernet: davinci_emac: add pm_runtime support
  net: ethernet: davinci_emac: Remove unnecessary #include
  ...

1 files changed, 7 insertions, 283 deletions

diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 106c449477b2..fb2136089a22 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -66,9 +66,6 @@ int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
 	dev_dbg(adapter->dev, "cmd pending\n");
 	atomic_inc(&adapter->cmd_pending);
 
-	/* Status pending, wake up main process */
-	queue_work(adapter->workqueue, &adapter->main_work);
-
 	/* Wait for completion */
 	wait_event_interruptible(adapter->cmd_wait_q.wait,
 				 *(cmd_queued->condition));
@@ -500,297 +497,24 @@ int mwifiex_disable_auto_ds(struct mwifiex_private *priv)
 EXPORT_SYMBOL_GPL(mwifiex_disable_auto_ds);
 
 /*
- * IOCTL request handler to set/get active channel.
- *
- * This function performs validity checking on channel/frequency
- * compatibility and returns failure if not valid.
- */
-int mwifiex_bss_set_channel(struct mwifiex_private *priv,
-			    struct mwifiex_chan_freq_power *chan)
-{
-	struct mwifiex_adapter *adapter = priv->adapter;
-	struct mwifiex_chan_freq_power *cfp = NULL;
-
-	if (!chan)
-		return -1;
-
-	if (!chan->channel && !chan->freq)
-		return -1;
-	if (adapter->adhoc_start_band & BAND_AN)
-		adapter->adhoc_start_band = BAND_G | BAND_B | BAND_GN;
-	else if (adapter->adhoc_start_band & BAND_A)
-		adapter->adhoc_start_band = BAND_G | BAND_B;
-	if (chan->channel) {
-		if (chan->channel <= MAX_CHANNEL_BAND_BG)
-			cfp = mwifiex_get_cfp(priv, 0, (u16) chan->channel, 0);
-		if (!cfp) {
-			cfp = mwifiex_get_cfp(priv, BAND_A,
-					      (u16) chan->channel, 0);
-			if (cfp) {
-				if (adapter->adhoc_11n_enabled)
-					adapter->adhoc_start_band = BAND_A
-								    | BAND_AN;
-				else
-					adapter->adhoc_start_band = BAND_A;
-			}
-		}
-	} else {
-		if (chan->freq <= MAX_FREQUENCY_BAND_BG)
-			cfp = mwifiex_get_cfp(priv, 0, 0, chan->freq);
-		if (!cfp) {
-			cfp = mwifiex_get_cfp(priv, BAND_A, 0, chan->freq);
-			if (cfp) {
-				if (adapter->adhoc_11n_enabled)
-					adapter->adhoc_start_band = BAND_A
-								    | BAND_AN;
-				else
-					adapter->adhoc_start_band = BAND_A;
-			}
-		}
-	}
-	if (!cfp || !cfp->channel) {
-		dev_err(adapter->dev, "invalid channel/freq\n");
-		return -1;
-	}
-	priv->adhoc_channel = (u8) cfp->channel;
-	chan->channel = cfp->channel;
-	chan->freq = cfp->freq;
-
-	return 0;
-}
-
-/*
- * IOCTL request handler to set/get Ad-Hoc channel.
- *
- * This function prepares the correct firmware command and
- * issues it to set or get the ad-hoc channel.
- */
-static int mwifiex_bss_ioctl_ibss_channel(struct mwifiex_private *priv,
-					  u16 action, u16 *channel)
-{
-	if (action == HostCmd_ACT_GEN_GET) {
-		if (!priv->media_connected) {
-			*channel = priv->adhoc_channel;
-			return 0;
-		}
-	} else {
-		priv->adhoc_channel = (u8) *channel;
-	}
-
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_RF_CHANNEL,
-				     action, 0, channel);
-}
-
-/*
- * IOCTL request handler to change Ad-Hoc channel.
- *
- * This function allocates the IOCTL request buffer, fills it
- * with requisite parameters and calls the IOCTL handler.
- *
- * The function follows the following steps to perform the change -
- *      - Get current IBSS information
- *      - Get current channel
- *      - If no change is required, return
- *      - If not connected, change channel and return
- *      - If connected,
- *          - Disconnect
- *          - Change channel
- *          - Perform specific SSID scan with same SSID
- *          - Start/Join the IBSS
- */
-int
-mwifiex_drv_change_adhoc_chan(struct mwifiex_private *priv, u16 channel)
-{
-	int ret;
-	struct mwifiex_bss_info bss_info;
-	struct mwifiex_ssid_bssid ssid_bssid;
-	u16 curr_chan = 0;
-	struct cfg80211_bss *bss = NULL;
-	struct ieee80211_channel *chan;
-	enum ieee80211_band band;
-
-	memset(&bss_info, 0, sizeof(bss_info));
-
-	/* Get BSS information */
-	if (mwifiex_get_bss_info(priv, &bss_info))
-		return -1;
-
-	/* Get current channel */
-	ret = mwifiex_bss_ioctl_ibss_channel(priv, HostCmd_ACT_GEN_GET,
-					     &curr_chan);
-
-	if (curr_chan == channel) {
-		ret = 0;
-		goto done;
-	}
-	dev_dbg(priv->adapter->dev, "cmd: updating channel from %d to %d\n",
-		curr_chan, channel);
-
-	if (!bss_info.media_connected) {
-		ret = 0;
-		goto done;
-	}
-
-	/* Do disonnect */
-	memset(&ssid_bssid, 0, ETH_ALEN);
-	ret = mwifiex_deauthenticate(priv, ssid_bssid.bssid);
-
-	ret = mwifiex_bss_ioctl_ibss_channel(priv, HostCmd_ACT_GEN_SET,
-					     &channel);
-
-	/* Do specific SSID scanning */
-	if (mwifiex_request_scan(priv, &bss_info.ssid)) {
-		ret = -1;
-		goto done;
-	}
-
-	band = mwifiex_band_to_radio_type(priv->curr_bss_params.band);
-	chan = __ieee80211_get_channel(priv->wdev->wiphy,
-				       ieee80211_channel_to_frequency(channel,
-								      band));
-
-	/* Find the BSS we want using available scan results */
-	bss = cfg80211_get_bss(priv->wdev->wiphy, chan, bss_info.bssid,
-			       bss_info.ssid.ssid, bss_info.ssid.ssid_len,
-			       WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
-	if (!bss)
-		wiphy_warn(priv->wdev->wiphy, "assoc: bss %pM not in scan results\n",
-			   bss_info.bssid);
-
-	ret = mwifiex_bss_start(priv, bss, &bss_info.ssid);
-done:
-	return ret;
-}
-
-/*
- * IOCTL request handler to get rate.
- *
- * This function prepares the correct firmware command and
- * issues it to get the current rate if it is connected,
- * otherwise, the function returns the lowest supported rate
- * for the band.
- */
-static int mwifiex_rate_ioctl_get_rate_value(struct mwifiex_private *priv,
-					     struct mwifiex_rate_cfg *rate_cfg)
-{
-	rate_cfg->is_rate_auto = priv->is_data_rate_auto;
-	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
-				     HostCmd_ACT_GEN_GET, 0, NULL);
-}
-
-/*
- * IOCTL request handler to set rate.
- *
- * This function prepares the correct firmware command and
- * issues it to set the current rate.
- *
- * The function also performs validation checking on the supplied value.
- */
-static int mwifiex_rate_ioctl_set_rate_value(struct mwifiex_private *priv,
-					     struct mwifiex_rate_cfg *rate_cfg)
-{
-	u8 rates[MWIFIEX_SUPPORTED_RATES];
-	u8 *rate;
-	int rate_index, ret;
-	u16 bitmap_rates[MAX_BITMAP_RATES_SIZE];
-	u32 i;
-	struct mwifiex_adapter *adapter = priv->adapter;
-
-	if (rate_cfg->is_rate_auto) {
-		memset(bitmap_rates, 0, sizeof(bitmap_rates));
-		/* Support all HR/DSSS rates */
-		bitmap_rates[0] = 0x000F;
-		/* Support all OFDM rates */
-		bitmap_rates[1] = 0x00FF;
-		/* Support all HT-MCSs rate */
-		for (i = 0; i < ARRAY_SIZE(priv->bitmap_rates) - 3; i++)
-			bitmap_rates[i + 2] = 0xFFFF;
-		bitmap_rates[9] = 0x3FFF;
-	} else {
-		memset(rates, 0, sizeof(rates));
-		mwifiex_get_active_data_rates(priv, rates);
-		rate = rates;
-		for (i = 0; (rate[i] && i < MWIFIEX_SUPPORTED_RATES); i++) {
-			dev_dbg(adapter->dev, "info: rate=%#x wanted=%#x\n",
-				rate[i], rate_cfg->rate);
-			if ((rate[i] & 0x7f) == (rate_cfg->rate & 0x7f))
-				break;
-		}
-		if ((i == MWIFIEX_SUPPORTED_RATES) || !rate[i]) {
-			dev_err(adapter->dev, "fixed data rate %#x is out "
-			       "of range\n", rate_cfg->rate);
-			return -1;
-		}
-		memset(bitmap_rates, 0, sizeof(bitmap_rates));
-
-		rate_index = mwifiex_data_rate_to_index(rate_cfg->rate);
-
-		/* Only allow b/g rates to be set */
-		if (rate_index >= MWIFIEX_RATE_INDEX_HRDSSS0 &&
-		    rate_index <= MWIFIEX_RATE_INDEX_HRDSSS3) {
-			bitmap_rates[0] = 1 << rate_index;
-		} else {
-			rate_index -= 1; /* There is a 0x00 in the table */
-			if (rate_index >= MWIFIEX_RATE_INDEX_OFDM0 &&
-			    rate_index <= MWIFIEX_RATE_INDEX_OFDM7)
-				bitmap_rates[1] = 1 << (rate_index -
-						   MWIFIEX_RATE_INDEX_OFDM0);
-		}
-	}
-
-	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_TX_RATE_CFG,
-				    HostCmd_ACT_GEN_SET, 0, bitmap_rates);
-
-	return ret;
-}
-
-/*
- * IOCTL request handler to set/get rate.
- *
- * This function can be used to set/get either the rate value or the
- * rate index.
- */
-static int mwifiex_rate_ioctl_cfg(struct mwifiex_private *priv,
-				  struct mwifiex_rate_cfg *rate_cfg)
-{
-	int status;
-
-	if (!rate_cfg)
-		return -1;
-
-	if (rate_cfg->action == HostCmd_ACT_GEN_GET)
-		status = mwifiex_rate_ioctl_get_rate_value(priv, rate_cfg);
-	else
-		status = mwifiex_rate_ioctl_set_rate_value(priv, rate_cfg);
-
-	return status;
-}
-
-/*
  * Sends IOCTL request to get the data rate.
  *
  * This function allocates the IOCTL request buffer, fills it
  * with requisite parameters and calls the IOCTL handler.
  */
-int mwifiex_drv_get_data_rate(struct mwifiex_private *priv,
-			      struct mwifiex_rate_cfg *rate)
+int mwifiex_drv_get_data_rate(struct mwifiex_private *priv, u32 *rate)
 {
 	int ret;
 
-	memset(rate, 0, sizeof(struct mwifiex_rate_cfg));
-	rate->action = HostCmd_ACT_GEN_GET;
-	ret = mwifiex_rate_ioctl_cfg(priv, rate);
+	ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
+				    HostCmd_ACT_GEN_GET, 0, NULL);
 
 	if (!ret) {
-		if (rate->is_rate_auto)
-			rate->rate = mwifiex_index_to_data_rate(priv,
-								priv->tx_rate,
-								priv->tx_htinfo
-								);
+		if (priv->is_data_rate_auto)
+			*rate = mwifiex_index_to_data_rate(priv, priv->tx_rate,
+							   priv->tx_htinfo);
 		else
-			rate->rate = priv->data_rate;
-	} else {
-		ret = -1;
+			*rate = priv->data_rate;
 	}
 
 	return ret;