diff options
author | Tomas Winkler <tomas.winkler@intel.com> | 2008-04-15 08:16:03 +0400 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2008-04-16 23:59:57 +0400 |
commit | 57aab75a39089744aba4bd126df2de526481b128 (patch) | |
tree | 34c7a4a3a29aea852e7886e68fc8778390f809e7 /drivers/net/wireless/iwlwifi | |
parent | b454048cb933eb69dd9d46c16bf01e9df997fa3d (diff) | |
download | linux-57aab75a39089744aba4bd126df2de526481b128.tar.xz |
iwlwifi: generalize iwlwifi init flow
This patch creates handlers to support
iwlwifi init flow for multiple HWs
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/iwlwifi')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-4965.c | 149 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.h | 11 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl4965-base.c | 179 |
3 files changed, 174 insertions, 165 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 472ca3d7e034..822169e61e9b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -114,6 +114,151 @@ static const u16 default_tid_to_tx_fifo[] = { #endif /*CONFIG_IWL4965_HT */ +/* check contents of special bootstrap uCode SRAM */ +static int iwl4965_verify_bsm(struct iwl_priv *priv) +{ + __le32 *image = priv->ucode_boot.v_addr; + u32 len = priv->ucode_boot.len; + u32 reg; + u32 val; + + IWL_DEBUG_INFO("Begin verify bsm\n"); + + /* verify BSM SRAM contents */ + val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG); + for (reg = BSM_SRAM_LOWER_BOUND; + reg < BSM_SRAM_LOWER_BOUND + len; + reg += sizeof(u32), image++) { + val = iwl_read_prph(priv, reg); + if (val != le32_to_cpu(*image)) { + IWL_ERROR("BSM uCode verification failed at " + "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", + BSM_SRAM_LOWER_BOUND, + reg - BSM_SRAM_LOWER_BOUND, len, + val, le32_to_cpu(*image)); + return -EIO; + } + } + + IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n"); + + return 0; +} + +/** + * iwl4965_load_bsm - Load bootstrap instructions + * + * BSM operation: + * + * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program + * in special SRAM that does not power down during RFKILL. When powering back + * up after power-saving sleeps (or during initial uCode load), the BSM loads + * the bootstrap program into the on-board processor, and starts it. + * + * The bootstrap program loads (via DMA) instructions and data for a new + * program from host DRAM locations indicated by the host driver in the + * BSM_DRAM_* registers. Once the new program is loaded, it starts + * automatically. + * + * When initializing the NIC, the host driver points the BSM to the + * "initialize" uCode image. This uCode sets up some internal data, then + * notifies host via "initialize alive" that it is complete. + * + * The host then replaces the BSM_DRAM_* pointer values to point to the + * normal runtime uCode instructions and a backup uCode data cache buffer + * (filled initially with starting data values for the on-board processor), + * then triggers the "initialize" uCode to load and launch the runtime uCode, + * which begins normal operation. + * + * When doing a power-save shutdown, runtime uCode saves data SRAM into + * the backup data cache in DRAM before SRAM is powered down. + * + * When powering back up, the BSM loads the bootstrap program. This reloads + * the runtime uCode instructions and the backup data cache into SRAM, + * and re-launches the runtime uCode from where it left off. + */ +static int iwl4965_load_bsm(struct iwl_priv *priv) +{ + __le32 *image = priv->ucode_boot.v_addr; + u32 len = priv->ucode_boot.len; + dma_addr_t pinst; + dma_addr_t pdata; + u32 inst_len; + u32 data_len; + int i; + u32 done; + u32 reg_offset; + int ret; + + IWL_DEBUG_INFO("Begin load bsm\n"); + + /* make sure bootstrap program is no larger than BSM's SRAM size */ + if (len > IWL_MAX_BSM_SIZE) + return -EINVAL; + + /* Tell bootstrap uCode where to find the "Initialize" uCode + * in host DRAM ... host DRAM physical address bits 35:4 for 4965. + * NOTE: iwl4965_initialize_alive_start() will replace these values, + * after the "initialize" uCode has run, to point to + * runtime/protocol instructions and backup data cache. */ + pinst = priv->ucode_init.p_addr >> 4; + pdata = priv->ucode_init_data.p_addr >> 4; + inst_len = priv->ucode_init.len; + data_len = priv->ucode_init_data.len; + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); + iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); + iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); + iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); + + /* Fill BSM memory with bootstrap instructions */ + for (reg_offset = BSM_SRAM_LOWER_BOUND; + reg_offset < BSM_SRAM_LOWER_BOUND + len; + reg_offset += sizeof(u32), image++) + _iwl_write_prph(priv, reg_offset, le32_to_cpu(*image)); + + ret = iwl4965_verify_bsm(priv); + if (ret) { + iwl_release_nic_access(priv); + return ret; + } + + /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ + iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0); + iwl_write_prph(priv, BSM_WR_MEM_DST_REG, RTC_INST_LOWER_BOUND); + iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); + + /* Load bootstrap code into instruction SRAM now, + * to prepare to load "initialize" uCode */ + iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); + + /* Wait for load of bootstrap uCode to finish */ + for (i = 0; i < 100; i++) { + done = iwl_read_prph(priv, BSM_WR_CTRL_REG); + if (!(done & BSM_WR_CTRL_REG_BIT_START)) + break; + udelay(10); + } + if (i < 100) + IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i); + else { + IWL_ERROR("BSM write did not complete!\n"); + return -EIO; + } + + /* Enable future boot loads whenever power management unit triggers it + * (e.g. when powering back up after power-save shutdown) */ + iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); + + iwl_release_nic_access(priv); + + return 0; +} + static int iwl4965_init_drv(struct iwl_priv *priv) { int ret; @@ -4789,6 +4934,10 @@ static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = { static struct iwl_lib_ops iwl4965_lib = { .init_drv = iwl4965_init_drv, + .hw_nic_init = iwl4965_hw_nic_init, + .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr, + .alive_notify = iwl4965_alive_notify, + .load_ucode = iwl4965_load_bsm, .eeprom_ops = { .verify_signature = iwlcore_eeprom_verify_signature, .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 6d82376f43f9..889fdbaeb735 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -89,9 +89,18 @@ struct iwl_hcmd_utils_ops { struct iwl_lib_ops { /* iwlwifi driver (priv) init */ int (*init_drv)(struct iwl_priv *priv); + /* nic init */ + int (*hw_nic_init)(struct iwl_priv *priv); + /* alive notification */ + int (*alive_notify)(struct iwl_priv *priv); + /* check validity of rtc data address */ + int (*is_valid_rtc_data_addr)(u32 addr); + /* 1st ucode load */ + int (*load_ucode)(struct iwl_priv *priv); + /* rfkill */ + void (*radio_kill_sw)(struct iwl_priv *priv, int disable_radio); /* eeprom operations (as defined in iwl-eeprom.h) */ struct iwl_eeprom_ops eeprom_ops; - void (*radio_kill_sw)(struct iwl_priv *priv, int disable_radio); }; struct iwl_ops { diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 06e44dad5f02..ecc9cba62bf9 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -4305,7 +4305,7 @@ static void iwl4965_dump_nic_error_log(struct iwl_priv *priv) base = le32_to_cpu(priv->card_alive.error_event_table_ptr); - if (!iwl4965_hw_valid_rtc_data_addr(base)) { + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { IWL_ERROR("Not valid error log pointer 0x%08X\n", base); return; } @@ -4400,7 +4400,7 @@ static void iwl4965_dump_nic_event_log(struct iwl_priv *priv) u32 size; /* # entries that we'll print */ base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - if (!iwl4965_hw_valid_rtc_data_addr(base)) { + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { IWL_ERROR("Invalid event log pointer 0x%08X\n", base); return; } @@ -5175,156 +5175,6 @@ static int iwl4965_verify_ucode(struct iwl_priv *priv) return rc; } - -/* check contents of special bootstrap uCode SRAM */ -static int iwl4965_verify_bsm(struct iwl_priv *priv) -{ - __le32 *image = priv->ucode_boot.v_addr; - u32 len = priv->ucode_boot.len; - u32 reg; - u32 val; - - IWL_DEBUG_INFO("Begin verify bsm\n"); - - /* verify BSM SRAM contents */ - val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG); - for (reg = BSM_SRAM_LOWER_BOUND; - reg < BSM_SRAM_LOWER_BOUND + len; - reg += sizeof(u32), image ++) { - val = iwl_read_prph(priv, reg); - if (val != le32_to_cpu(*image)) { - IWL_ERROR("BSM uCode verification failed at " - "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", - BSM_SRAM_LOWER_BOUND, - reg - BSM_SRAM_LOWER_BOUND, len, - val, le32_to_cpu(*image)); - return -EIO; - } - } - - IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n"); - - return 0; -} - -/** - * iwl4965_load_bsm - Load bootstrap instructions - * - * BSM operation: - * - * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program - * in special SRAM that does not power down during RFKILL. When powering back - * up after power-saving sleeps (or during initial uCode load), the BSM loads - * the bootstrap program into the on-board processor, and starts it. - * - * The bootstrap program loads (via DMA) instructions and data for a new - * program from host DRAM locations indicated by the host driver in the - * BSM_DRAM_* registers. Once the new program is loaded, it starts - * automatically. - * - * When initializing the NIC, the host driver points the BSM to the - * "initialize" uCode image. This uCode sets up some internal data, then - * notifies host via "initialize alive" that it is complete. - * - * The host then replaces the BSM_DRAM_* pointer values to point to the - * normal runtime uCode instructions and a backup uCode data cache buffer - * (filled initially with starting data values for the on-board processor), - * then triggers the "initialize" uCode to load and launch the runtime uCode, - * which begins normal operation. - * - * When doing a power-save shutdown, runtime uCode saves data SRAM into - * the backup data cache in DRAM before SRAM is powered down. - * - * When powering back up, the BSM loads the bootstrap program. This reloads - * the runtime uCode instructions and the backup data cache into SRAM, - * and re-launches the runtime uCode from where it left off. - */ -static int iwl4965_load_bsm(struct iwl_priv *priv) -{ - __le32 *image = priv->ucode_boot.v_addr; - u32 len = priv->ucode_boot.len; - dma_addr_t pinst; - dma_addr_t pdata; - u32 inst_len; - u32 data_len; - int rc; - int i; - u32 done; - u32 reg_offset; - - IWL_DEBUG_INFO("Begin load bsm\n"); - - /* make sure bootstrap program is no larger than BSM's SRAM size */ - if (len > IWL_MAX_BSM_SIZE) - return -EINVAL; - - /* Tell bootstrap uCode where to find the "Initialize" uCode - * in host DRAM ... host DRAM physical address bits 35:4 for 4965. - * NOTE: iwl4965_initialize_alive_start() will replace these values, - * after the "initialize" uCode has run, to point to - * runtime/protocol instructions and backup data cache. */ - pinst = priv->ucode_init.p_addr >> 4; - pdata = priv->ucode_init_data.p_addr >> 4; - inst_len = priv->ucode_init.len; - data_len = priv->ucode_init_data.len; - - rc = iwl_grab_nic_access(priv); - if (rc) - return rc; - - iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); - iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); - iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); - iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); - - /* Fill BSM memory with bootstrap instructions */ - for (reg_offset = BSM_SRAM_LOWER_BOUND; - reg_offset < BSM_SRAM_LOWER_BOUND + len; - reg_offset += sizeof(u32), image++) - _iwl_write_prph(priv, reg_offset, - le32_to_cpu(*image)); - - rc = iwl4965_verify_bsm(priv); - if (rc) { - iwl_release_nic_access(priv); - return rc; - } - - /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ - iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0); - iwl_write_prph(priv, BSM_WR_MEM_DST_REG, - RTC_INST_LOWER_BOUND); - iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); - - /* Load bootstrap code into instruction SRAM now, - * to prepare to load "initialize" uCode */ - iwl_write_prph(priv, BSM_WR_CTRL_REG, - BSM_WR_CTRL_REG_BIT_START); - - /* Wait for load of bootstrap uCode to finish */ - for (i = 0; i < 100; i++) { - done = iwl_read_prph(priv, BSM_WR_CTRL_REG); - if (!(done & BSM_WR_CTRL_REG_BIT_START)) - break; - udelay(10); - } - if (i < 100) - IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i); - else { - IWL_ERROR("BSM write did not complete!\n"); - return -EIO; - } - - /* Enable future boot loads whenever power management unit triggers it - * (e.g. when powering back up after power-save shutdown) */ - iwl_write_prph(priv, BSM_WR_CTRL_REG, - BSM_WR_CTRL_REG_BIT_START_EN); - - iwl_release_nic_access(priv); - - return 0; -} - static void iwl4965_nic_start(struct iwl_priv *priv) { /* Remove all resets to allow NIC to operate */ @@ -5634,7 +5484,7 @@ static void iwl4965_init_alive_start(struct iwl_priv *priv) */ static void iwl4965_alive_start(struct iwl_priv *priv) { - int rc = 0; + int ret = 0; IWL_DEBUG_INFO("Runtime Alive received.\n"); @@ -5657,10 +5507,10 @@ static void iwl4965_alive_start(struct iwl_priv *priv) iwlcore_clear_stations_table(priv); - rc = iwl4965_alive_notify(priv); - if (rc) { + ret = priv->cfg->ops->lib->alive_notify(priv); + if (ret) { IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n", - rc); + ret); goto restart; } @@ -5835,7 +5685,8 @@ static void iwl4965_down(struct iwl_priv *priv) static int __iwl4965_up(struct iwl_priv *priv) { - int rc, i; + int i; + int ret; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { IWL_WARNING("Exit pending; will not bring the NIC up\n"); @@ -5870,10 +5721,10 @@ static int __iwl4965_up(struct iwl_priv *priv) iwl_rfkill_set_hw_state(priv); iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - rc = iwl4965_hw_nic_init(priv); - if (rc) { - IWL_ERROR("Unable to int nic\n"); - return rc; + ret = priv->cfg->ops->lib->hw_nic_init(priv); + if (ret) { + IWL_ERROR("Unable to init nic\n"); + return ret; } /* make sure rfkill handshake bits are cleared */ @@ -5906,10 +5757,10 @@ static int __iwl4965_up(struct iwl_priv *priv) /* load bootstrap state machine, * load bootstrap program into processor's memory, * prepare to load the "initialize" uCode */ - rc = iwl4965_load_bsm(priv); + ret = priv->cfg->ops->lib->load_ucode(priv); - if (rc) { - IWL_ERROR("Unable to set up bootstrap uCode: %d\n", rc); + if (ret) { + IWL_ERROR("Unable to set up bootstrap uCode: %d\n", ret); continue; } |