Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
This pull request is intended for the 3.11 stream...

One big highlight is the cw1200 driver the ST-E CW1100 & CW1200
WLAN chipsets.  This one has been lingering for a while, lacking
some review comments.  Once started getting pulled into linux-next,
it got a bit more attention and a number of improvements were made
over the initial cut.  No doubt there will be more changes ahead,
but I think it is looking alright at this point.

Along with that, there is the usual flurry of updates to the mac80211
core and the iwlwifi, mwifiex, ath9k, rt2x00, wil6210, and other
drivers.  A few of the highlights are some rt2x00 refactoring/cleanup
by Gabor Juhos, some rt2800 hardware support enhancements by Stanislaw
Gruszka, some iwlwifi power management updates from Alexander Bondar,
some enhanced bcma SPROM support from Rafał Miłecki, and a variety
of other things here and there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 90 insertions, 3 deletions

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
index 81fe45f46be7..d8e19290b0f3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
@@ -101,20 +101,107 @@ enum iwl_power_flags {
  * @tx_data_timeout:    Minimum time (usec) from last Tx packet for AM to
  *			PSM transition - legacy PM
  * @sleep_interval:	not in use
- * @keep_alive_beacons:	not in use
+ * @skip_dtim_periods:	Number of DTIM periods to skip if Skip over DTIM flag
+ *			is set. For example, if it is required to skip over
+ *			one DTIM, this value need to be set to 2 (DTIM periods).
  * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
  *			Default: 80dbm
  */
 struct iwl_powertable_cmd {
-	/* PM_POWER_TABLE_CMD_API_S_VER_5 */
+	/* PM_POWER_TABLE_CMD_API_S_VER_6 */
 	__le16 flags;
 	u8 keep_alive_seconds;
 	u8 debug_flags;
 	__le32 rx_data_timeout;
 	__le32 tx_data_timeout;
 	__le32 sleep_interval[IWL_POWER_VEC_SIZE];
-	__le32 keep_alive_beacons;
+	__le32 skip_dtim_periods;
 	__le32 lprx_rssi_threshold;
 } __packed;
 
+/**
+ * struct iwl_beacon_filter_cmd
+ * REPLY_BEACON_FILTERING_CMD = 0xd2 (command)
+ * @id_and_color: MAC contex identifier
+ * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon
+ *      to driver if delta in Energy values calculated for this and last
+ *      passed beacon is greater than this threshold. Zero value means that
+ *      the Energy change is ignored for beacon filtering, and beacon will
+ *      not be forced to be sent to driver regardless of this delta. Typical
+ *      energy delta 5dB.
+ * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state.
+ *      Send beacon to driver if delta in Energy values calculated for this
+ *      and last passed beacon is greater than this threshold. Zero value
+ *      means that the Energy change is ignored for beacon filtering while in
+ *      Roaming state, typical energy delta 1dB.
+ * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values
+ *      calculated for current beacon is less than the threshold, use
+ *      Roaming Energy Delta Threshold, otherwise use normal Energy Delta
+ *      Threshold. Typical energy threshold is -72dBm.
+ * @bf_temperature_delta: Send Beacon to driver if delta in temperature values
+ *      calculated for this and the last passed beacon is greater than  this
+ *      threshold. Zero value means that the temperature changeis ignored for
+ *      beacon filtering; beacons will not be  forced to be sent to driver
+ *      regardless of whether its temerature has been changed.
+ * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled.
+ * @bf_filter_escape_timer: Send beacons to to driver if no beacons were passed
+ *      for a specific period of time. Units: Beacons.
+ * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed
+ *      for a longer period of time then this escape-timeout. Units: Beacons.
+ * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled.
+ */
+struct iwl_beacon_filter_cmd {
+	u8 bf_energy_delta;
+	u8 bf_roaming_energy_delta;
+	u8 bf_roaming_state;
+	u8 bf_temperature_delta;
+	u8 bf_enable_beacon_filter;
+	u8 bf_debug_flag;
+	__le16 reserved1;
+	__le32 bf_escape_timer;
+	__le32 ba_escape_timer;
+	u8 ba_enable_beacon_abort;
+	u8 reserved2[3];
+} __packed;
+
+/* Beacon filtering and beacon abort */
+#define IWL_BF_ENERGY_DELTA_DEFAULT 5
+#define IWL_BF_ENERGY_DELTA_MAX 255
+#define IWL_BF_ENERGY_DELTA_MIN 0
+
+#define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1
+#define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255
+#define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0
+
+#define IWL_BF_ROAMING_STATE_DEFAULT 72
+#define IWL_BF_ROAMING_STATE_MAX 255
+#define IWL_BF_ROAMING_STATE_MIN 0
+
+#define IWL_BF_TEMPERATURE_DELTA_DEFAULT 5
+#define IWL_BF_TEMPERATURE_DELTA_MAX 255
+#define IWL_BF_TEMPERATURE_DELTA_MIN 0
+
+#define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1
+
+#define IWL_BF_DEBUG_FLAG_DEFAULT 0
+
+#define IWL_BF_ESCAPE_TIMER_DEFAULT 50
+#define IWL_BF_ESCAPE_TIMER_MAX 1024
+#define IWL_BF_ESCAPE_TIMER_MIN 0
+
+#define IWL_BA_ESCAPE_TIMER_DEFAULT 3
+#define IWL_BA_ESCAPE_TIMER_MAX 1024
+#define IWL_BA_ESCAPE_TIMER_MIN 0
+
+#define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1
+
+#define IWL_BF_CMD_CONFIG_DEFAULTS					\
+	.bf_energy_delta = IWL_BF_ENERGY_DELTA_DEFAULT,			\
+	.bf_roaming_energy_delta = IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT,	\
+	.bf_roaming_state = IWL_BF_ROAMING_STATE_DEFAULT,		\
+	.bf_temperature_delta = IWL_BF_TEMPERATURE_DELTA_DEFAULT,	\
+	.bf_debug_flag = IWL_BF_DEBUG_FLAG_DEFAULT,			\
+	.bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER_DEFAULT),	\
+	.ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER_DEFAULT)
+
 #endif