Merge tag 'wireless-drivers-next-for-davem-2015-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

ath9k:

* add Active Interference Cancellation, a method implemented in the HW
  to counter WLAN RX > sensitivity degradation when BT is transmitting
  at the same time. This feature is supported by cards like WB222
  based on AR9462.

iwlwifi:

* Location Aware Regulatory was added by Arik
* 8000 device family work
* update to the BT Coex firmware API

brmcfmac:

* add new BCM43455 and BCM43457 SDIO device support
* add new BCM43430 SDIO device support

wil6210:

* take care of AP bridging
* fix NAPI behavior
* found approach to achieve 4*n+2 alignment of Rx frames

rt2x00:

* add new rt2800usb device DWA 130

rtlwifi:

* add USB ID for D-Link DWA-131
* add USB ID ASUS N10 WiFi dongle

mwifiex:

* throughput enhancements
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 47 deletions

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h
index f3b11897991e..d398a6102805 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-coex.h
@@ -235,36 +235,12 @@ enum iwl_bt_coex_enabled_modules {
  * struct iwl_bt_coex_cmd - bt coex configuration command
  * @mode: enum %iwl_bt_coex_mode
  * @enabled_modules: enum %iwl_bt_coex_enabled_modules
- * @max_kill: max count of Tx retries due to kill from PTA
- * @override_primary_lut: enum %iwl_bt_coex_lut_type: BT_COEX_INVALID_LUT
- *	should be set by default
- * @override_secondary_lut: enum %iwl_bt_coex_lut_type: BT_COEX_INVALID_LUT
- *	should be set by default
- * @bt4_antenna_isolation_thr: antenna threshold value
- * @bt4_tx_tx_delta_freq_thr: TxTx delta frequency
- * @bt4_tx_rx_max_freq0: TxRx max frequency
- * @multiprio_lut: multi priority LUT configuration
- * @mplut_prio_boost: BT priority boost registers
- * @decision_lut: PTA decision LUT, per Prio-Ch
  *
  * The structure is used for the BT_COEX command.
  */
 struct iwl_bt_coex_cmd {
 	__le32 mode;
 	__le32 enabled_modules;
-
-	__le32 max_kill;
-	__le32 override_primary_lut;
-	__le32 override_secondary_lut;
-	__le32 bt4_antenna_isolation_thr;
-
-	__le32 bt4_tx_tx_delta_freq_thr;
-	__le32 bt4_tx_rx_max_freq0;
-
-	__le32 multiprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE];
-	__le32 mplut_prio_boost[BT_COEX_BOOST_SIZE];
-
-	__le32 decision_lut[BT_COEX_MAX_LUT][BT_COEX_LUT_SIZE];
 } __packed; /* BT_COEX_CMD_API_S_VER_6 */
 
 /**
@@ -280,29 +256,6 @@ struct iwl_bt_coex_corun_lut_update_cmd {
 } __packed; /* BT_COEX_UPDATE_CORUN_LUT_API_S_VER_1 */
 
 /**
- * struct iwl_bt_coex_sw_boost - SW boost values
- * @wifi_tx_prio_boost: SW boost of wifi tx priority
- * @wifi_rx_prio_boost: SW boost of wifi rx priority
- * @kill_ack_msk: kill ACK mask. 1 - Tx ACK, 0 - kill Tx of ACK.
- * @kill_cts_msk: kill CTS mask. 1 - Tx CTS, 0 - kill Tx of CTS.
- */
-struct iwl_bt_coex_sw_boost {
-	__le32 wifi_tx_prio_boost;
-	__le32 wifi_rx_prio_boost;
-	__le32 kill_ack_msk;
-	__le32 kill_cts_msk;
-};
-
-/**
- * struct iwl_bt_coex_sw_boost_update_cmd - command to update the SW boost
- * @boost_values: check struct  %iwl_bt_coex_sw_boost - one for each channel
- *	primary / secondary / low priority
- */
-struct iwl_bt_coex_sw_boost_update_cmd {
-	struct iwl_bt_coex_sw_boost boost_values[3];
-} __packed; /* BT_COEX_UPDATE_SW_BOOST_S_VER_1 */
-
-/**
  * struct iwl_bt_coex_reduced_txp_update_cmd
  * @reduced_txp: bit BT_REDUCED_TX_POWER_BIT to enable / disable, rest of the
  *	bits are the sta_id (value)