iwlagn: move rx transport functions to iwl-trans-rx-pcie.c

Also create a new file: iwl-trans-int-pcie.h which will include
the non static functions that are shared among the current pcie transport layer.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

1 files changed, 0 insertions, 354 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index c2a124131ef9..bd85af91c58a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -457,346 +457,6 @@ static void iwl_bg_tx_flush(struct work_struct *work)
 	iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
 }
 
-/**
- * iwl_rx_handle - Main entry function for receiving responses from uCode
- *
- * Uses the priv->rx_handlers callback function array to invoke
- * the appropriate handlers, including command responses,
- * frame-received notifications, and other notifications.
- */
-static void iwl_rx_handle(struct iwl_priv *priv)
-{
-	struct iwl_rx_mem_buffer *rxb;
-	struct iwl_rx_packet *pkt;
-	struct iwl_rx_queue *rxq = &priv->rxq;
-	u32 r, i;
-	int reclaim;
-	unsigned long flags;
-	u8 fill_rx = 0;
-	u32 count = 8;
-	int total_empty;
-
-	/* uCode's read index (stored in shared DRAM) indicates the last Rx
-	 * buffer that the driver may process (last buffer filled by ucode). */
-	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
-	i = rxq->read;
-
-	/* Rx interrupt, but nothing sent from uCode */
-	if (i == r)
-		IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
-
-	/* calculate total frames need to be restock after handling RX */
-	total_empty = r - rxq->write_actual;
-	if (total_empty < 0)
-		total_empty += RX_QUEUE_SIZE;
-
-	if (total_empty > (RX_QUEUE_SIZE / 2))
-		fill_rx = 1;
-
-	while (i != r) {
-		int len;
-
-		rxb = rxq->queue[i];
-
-		/* If an RXB doesn't have a Rx queue slot associated with it,
-		 * then a bug has been introduced in the queue refilling
-		 * routines -- catch it here */
-		if (WARN_ON(rxb == NULL)) {
-			i = (i + 1) & RX_QUEUE_MASK;
-			continue;
-		}
-
-		rxq->queue[i] = NULL;
-
-		dma_unmap_page(priv->bus.dev, rxb->page_dma,
-			       PAGE_SIZE << priv->hw_params.rx_page_order,
-			       DMA_FROM_DEVICE);
-		pkt = rxb_addr(rxb);
-
-		IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
-			i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
-
-		len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
-		len += sizeof(u32); /* account for status word */
-		trace_iwlwifi_dev_rx(priv, pkt, len);
-
-		/* Reclaim a command buffer only if this packet is a response
-		 *   to a (driver-originated) command.
-		 * If the packet (e.g. Rx frame) originated from uCode,
-		 *   there is no command buffer to reclaim.
-		 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
-		 *   but apparently a few don't get set; catch them here. */
-		reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
-			(pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
-			(pkt->hdr.cmd != REPLY_RX) &&
-			(pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
-			(pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
-			(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
-			(pkt->hdr.cmd != REPLY_TX);
-
-		iwl_rx_dispatch(priv, rxb);
-
-		/*
-		 * XXX: After here, we should always check rxb->page
-		 * against NULL before touching it or its virtual
-		 * memory (pkt). Because some rx_handler might have
-		 * already taken or freed the pages.
-		 */
-
-		if (reclaim) {
-			/* Invoke any callbacks, transfer the buffer to caller,
-			 * and fire off the (possibly) blocking
-			 * trans_send_cmd()
-			 * as we reclaim the driver command queue */
-			if (rxb->page)
-				iwl_tx_cmd_complete(priv, rxb);
-			else
-				IWL_WARN(priv, "Claim null rxb?\n");
-		}
-
-		/* Reuse the page if possible. For notification packets and
-		 * SKBs that fail to Rx correctly, add them back into the
-		 * rx_free list for reuse later. */
-		spin_lock_irqsave(&rxq->lock, flags);
-		if (rxb->page != NULL) {
-			rxb->page_dma = dma_map_page(priv->bus.dev, rxb->page,
-				0, PAGE_SIZE << priv->hw_params.rx_page_order,
-				DMA_FROM_DEVICE);
-			list_add_tail(&rxb->list, &rxq->rx_free);
-			rxq->free_count++;
-		} else
-			list_add_tail(&rxb->list, &rxq->rx_used);
-
-		spin_unlock_irqrestore(&rxq->lock, flags);
-
-		i = (i + 1) & RX_QUEUE_MASK;
-		/* If there are a lot of unused frames,
-		 * restock the Rx queue so ucode wont assert. */
-		if (fill_rx) {
-			count++;
-			if (count >= 8) {
-				rxq->read = i;
-				iwlagn_rx_replenish_now(priv);
-				count = 0;
-			}
-		}
-	}
-
-	/* Backtrack one entry */
-	rxq->read = i;
-	if (fill_rx)
-		iwlagn_rx_replenish_now(priv);
-	else
-		iwlagn_rx_queue_restock(priv);
-}
-
-/* tasklet for iwlagn interrupt */
-void iwl_irq_tasklet(struct iwl_priv *priv)
-{
-	u32 inta = 0;
-	u32 handled = 0;
-	unsigned long flags;
-	u32 i;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	u32 inta_mask;
-#endif
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* Ack/clear/reset pending uCode interrupts.
-	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
-	 */
-	/* There is a hardware bug in the interrupt mask function that some
-	 * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
-	 * they are disabled in the CSR_INT_MASK register. Furthermore the
-	 * ICT interrupt handling mechanism has another bug that might cause
-	 * these unmasked interrupts fail to be detected. We workaround the
-	 * hardware bugs here by ACKing all the possible interrupts so that
-	 * interrupt coalescing can still be achieved.
-	 */
-	iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask);
-
-	inta = priv->_agn.inta;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
-		/* just for debug */
-		inta_mask = iwl_read32(priv, CSR_INT_MASK);
-		IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
-				inta, inta_mask);
-	}
-#endif
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	/* saved interrupt in inta variable now we can reset priv->_agn.inta */
-	priv->_agn.inta = 0;
-
-	/* Now service all interrupt bits discovered above. */
-	if (inta & CSR_INT_BIT_HW_ERR) {
-		IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
-
-		/* Tell the device to stop sending interrupts */
-		iwl_disable_interrupts(priv);
-
-		priv->isr_stats.hw++;
-		iwl_irq_handle_error(priv);
-
-		handled |= CSR_INT_BIT_HW_ERR;
-
-		return;
-	}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
-		/* NIC fires this, but we don't use it, redundant with WAKEUP */
-		if (inta & CSR_INT_BIT_SCD) {
-			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
-				      "the frame/frames.\n");
-			priv->isr_stats.sch++;
-		}
-
-		/* Alive notification via Rx interrupt will do the real work */
-		if (inta & CSR_INT_BIT_ALIVE) {
-			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
-			priv->isr_stats.alive++;
-		}
-	}
-#endif
-	/* Safely ignore these bits for debug checks below */
-	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
-	/* HW RF KILL switch toggled */
-	if (inta & CSR_INT_BIT_RF_KILL) {
-		int hw_rf_kill = 0;
-		if (!(iwl_read32(priv, CSR_GP_CNTRL) &
-				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
-			hw_rf_kill = 1;
-
-		IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
-				hw_rf_kill ? "disable radio" : "enable radio");
-
-		priv->isr_stats.rfkill++;
-
-		/* driver only loads ucode once setting the interface up.
-		 * the driver allows loading the ucode even if the radio
-		 * is killed. Hence update the killswitch state here. The
-		 * rfkill handler will care about restarting if needed.
-		 */
-		if (!test_bit(STATUS_ALIVE, &priv->status)) {
-			if (hw_rf_kill)
-				set_bit(STATUS_RF_KILL_HW, &priv->status);
-			else
-				clear_bit(STATUS_RF_KILL_HW, &priv->status);
-			wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
-		}
-
-		handled |= CSR_INT_BIT_RF_KILL;
-	}
-
-	/* Chip got too hot and stopped itself */
-	if (inta & CSR_INT_BIT_CT_KILL) {
-		IWL_ERR(priv, "Microcode CT kill error detected.\n");
-		priv->isr_stats.ctkill++;
-		handled |= CSR_INT_BIT_CT_KILL;
-	}
-
-	/* Error detected by uCode */
-	if (inta & CSR_INT_BIT_SW_ERR) {
-		IWL_ERR(priv, "Microcode SW error detected. "
-			" Restarting 0x%X.\n", inta);
-		priv->isr_stats.sw++;
-		iwl_irq_handle_error(priv);
-		handled |= CSR_INT_BIT_SW_ERR;
-	}
-
-	/* uCode wakes up after power-down sleep */
-	if (inta & CSR_INT_BIT_WAKEUP) {
-		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
-		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
-		for (i = 0; i < priv->hw_params.max_txq_num; i++)
-			iwl_txq_update_write_ptr(priv, &priv->txq[i]);
-
-		priv->isr_stats.wakeup++;
-
-		handled |= CSR_INT_BIT_WAKEUP;
-	}
-
-	/* All uCode command responses, including Tx command responses,
-	 * Rx "responses" (frame-received notification), and other
-	 * notifications from uCode come through here*/
-	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
-			CSR_INT_BIT_RX_PERIODIC)) {
-		IWL_DEBUG_ISR(priv, "Rx interrupt\n");
-		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
-			handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
-			iwl_write32(priv, CSR_FH_INT_STATUS,
-					CSR_FH_INT_RX_MASK);
-		}
-		if (inta & CSR_INT_BIT_RX_PERIODIC) {
-			handled |= CSR_INT_BIT_RX_PERIODIC;
-			iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
-		}
-		/* Sending RX interrupt require many steps to be done in the
-		 * the device:
-		 * 1- write interrupt to current index in ICT table.
-		 * 2- dma RX frame.
-		 * 3- update RX shared data to indicate last write index.
-		 * 4- send interrupt.
-		 * This could lead to RX race, driver could receive RX interrupt
-		 * but the shared data changes does not reflect this;
-		 * periodic interrupt will detect any dangling Rx activity.
-		 */
-
-		/* Disable periodic interrupt; we use it as just a one-shot. */
-		iwl_write8(priv, CSR_INT_PERIODIC_REG,
-			    CSR_INT_PERIODIC_DIS);
-		iwl_rx_handle(priv);
-
-		/*
-		 * Enable periodic interrupt in 8 msec only if we received
-		 * real RX interrupt (instead of just periodic int), to catch
-		 * any dangling Rx interrupt.  If it was just the periodic
-		 * interrupt, there was no dangling Rx activity, and no need
-		 * to extend the periodic interrupt; one-shot is enough.
-		 */
-		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
-			iwl_write8(priv, CSR_INT_PERIODIC_REG,
-				    CSR_INT_PERIODIC_ENA);
-
-		priv->isr_stats.rx++;
-	}
-
-	/* This "Tx" DMA channel is used only for loading uCode */
-	if (inta & CSR_INT_BIT_FH_TX) {
-		iwl_write32(priv, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
-		IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
-		priv->isr_stats.tx++;
-		handled |= CSR_INT_BIT_FH_TX;
-		/* Wake up uCode load routine, now that load is complete */
-		priv->ucode_write_complete = 1;
-		wake_up_interruptible(&priv->wait_command_queue);
-	}
-
-	if (inta & ~handled) {
-		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
-		priv->isr_stats.unhandled++;
-	}
-
-	if (inta & ~(priv->inta_mask)) {
-		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
-			 inta & ~priv->inta_mask);
-	}
-
-	/* Re-enable all interrupts */
-	/* only Re-enable if disabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &priv->status))
-		iwl_enable_interrupts(priv);
-	/* Re-enable RF_KILL if it occurred */
-	else if (handled & CSR_INT_BIT_RF_KILL)
-		iwl_enable_rfkill_int(priv);
-}
-
 /*****************************************************************************
  *
  * sysfs attributes
@@ -2321,19 +1981,6 @@ static void iwl_bg_restart(struct work_struct *data)
 	}
 }
 
-static void iwl_bg_rx_replenish(struct work_struct *data)
-{
-	struct iwl_priv *priv =
-	    container_of(data, struct iwl_priv, rx_replenish);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	iwlagn_rx_replenish(priv);
-	mutex_unlock(&priv->mutex);
-}
-
 static int iwl_mac_offchannel_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
 				 struct ieee80211_channel *chan,
 				 enum nl80211_channel_type channel_type,
@@ -3188,7 +2835,6 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	init_waitqueue_head(&priv->wait_command_queue);
 
 	INIT_WORK(&priv->restart, iwl_bg_restart);
-	INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
 	INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
 	INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
 	INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);