Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits)
  bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.
  vlan: Calling vlan_hwaccel_do_receive() is always valid.
  tproxy: use the interface primary IP address as a default value for --on-ip
  tproxy: added IPv6 support to the socket match
  cxgb3: function namespace cleanup
  tproxy: added IPv6 support to the TPROXY target
  tproxy: added IPv6 socket lookup function to nf_tproxy_core
  be2net: Changes to use only priority codes allowed by f/w
  tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
  tproxy: added tproxy sockopt interface in the IPV6 layer
  tproxy: added udp6_lib_lookup function
  tproxy: added const specifiers to udp lookup functions
  tproxy: split off ipv6 defragmentation to a separate module
  l2tp: small cleanup
  nf_nat: restrict ICMP translation for embedded header
  can: mcp251x: fix generation of error frames
  can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set
  can-raw: add msg_flags to distinguish local traffic
  9p: client code cleanup
  rds: make local functions/variables static
  ...

Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and
drivers/net/wireless/ath/ath9k/debug.c as per David

1 files changed, 37 insertions, 21 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
index c4c5691032a6..e2019e756936 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
@@ -65,7 +65,7 @@
 
 #include "iwl-dev.h"
 #include "iwl-core.h"
-#include "iwl-calib.h"
+#include "iwl-agn-calib.h"
 
 /*****************************************************************************
  * INIT calibrations framework
@@ -625,13 +625,14 @@ void iwl_sensitivity_calibration(struct iwl_priv *priv, void *resp)
 
 	data = &(priv->sensitivity_data);
 
-	if (!iwl_is_associated(priv)) {
+	if (!iwl_is_any_associated(priv)) {
 		IWL_DEBUG_CALIB(priv, "<< - not associated\n");
 		return;
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->cfg->bt_statistics) {
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->bt_statistics) {
 		rx_info = &(((struct iwl_bt_notif_statistics *)resp)->
 			      rx.general.common);
 		ofdm = &(((struct iwl_bt_notif_statistics *)resp)->rx.ofdm);
@@ -763,6 +764,12 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 	unsigned long flags;
 	struct statistics_rx_non_phy *rx_info;
 	u8 first_chain;
+	/*
+	 * MULTI-FIXME:
+	 * When we support multiple interfaces on different channels,
+	 * this must be modified/fixed.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
 
 	if (priv->disable_chain_noise_cal)
 		return;
@@ -780,7 +787,8 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->cfg->bt_statistics) {
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->bt_statistics) {
 		rx_info = &(((struct iwl_bt_notif_statistics *)stat_resp)->
 			      rx.general.common);
 	} else {
@@ -793,9 +801,10 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 		return;
 	}
 
-	rxon_band24 = !!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK);
-	rxon_chnum = le16_to_cpu(priv->staging_rxon.channel);
-	if (priv->cfg->bt_statistics) {
+	rxon_band24 = !!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK);
+	rxon_chnum = le16_to_cpu(ctx->staging.channel);
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->bt_statistics) {
 		stat_band24 = !!(((struct iwl_bt_notif_statistics *)
 				 stat_resp)->flag &
 				 STATISTICS_REPLY_FLG_BAND_24G_MSK);
@@ -855,16 +864,17 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 	/* If this is the "chain_noise_num_beacons", determine:
 	 * 1)  Disconnected antennas (using signal strengths)
 	 * 2)  Differential gain (using silence noise) to balance receivers */
-	if (data->beacon_count != priv->cfg->chain_noise_num_beacons)
+	if (data->beacon_count !=
+		priv->cfg->base_params->chain_noise_num_beacons)
 		return;
 
 	/* Analyze signal for disconnected antenna */
-	average_sig[0] =
-		(data->chain_signal_a) / priv->cfg->chain_noise_num_beacons;
-	average_sig[1] =
-		(data->chain_signal_b) / priv->cfg->chain_noise_num_beacons;
-	average_sig[2] =
-		(data->chain_signal_c) / priv->cfg->chain_noise_num_beacons;
+	average_sig[0] = data->chain_signal_a /
+			 priv->cfg->base_params->chain_noise_num_beacons;
+	average_sig[1] = data->chain_signal_b /
+			 priv->cfg->base_params->chain_noise_num_beacons;
+	average_sig[2] = data->chain_signal_c /
+			 priv->cfg->base_params->chain_noise_num_beacons;
 
 	if (average_sig[0] >= average_sig[1]) {
 		max_average_sig = average_sig[0];
@@ -914,7 +924,13 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 	 * To be safe, simply mask out any chains that we know
 	 * are not on the device.
 	 */
-	active_chains &= priv->hw_params.valid_rx_ant;
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    priv->bt_full_concurrent) {
+		/* operated as 1x1 in full concurrency mode */
+		active_chains &= first_antenna(priv->hw_params.valid_rx_ant);
+	} else
+		active_chains &= priv->hw_params.valid_rx_ant;
 
 	num_tx_chains = 0;
 	for (i = 0; i < NUM_RX_CHAINS; i++) {
@@ -957,12 +973,12 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 			active_chains);
 
 	/* Analyze noise for rx balance */
-	average_noise[0] =
-		((data->chain_noise_a) / priv->cfg->chain_noise_num_beacons);
-	average_noise[1] =
-		((data->chain_noise_b) / priv->cfg->chain_noise_num_beacons);
-	average_noise[2] =
-		((data->chain_noise_c) / priv->cfg->chain_noise_num_beacons);
+	average_noise[0] = data->chain_noise_a /
+			   priv->cfg->base_params->chain_noise_num_beacons;
+	average_noise[1] = data->chain_noise_b /
+			   priv->cfg->base_params->chain_noise_num_beacons;
+	average_noise[2] = data->chain_noise_c /
+			   priv->cfg->base_params->chain_noise_num_beacons;
 
 	for (i = 0; i < NUM_RX_CHAINS; i++) {
 		if (!(data->disconn_array[i]) &&