iwlagn: reduce redundant parameter definitions

move paramater definitions to a device paramater structure only
leaving the device name, which antennas are used and what firmware
file to use in the iwl_cfg structure.  this will not completely
remove the redundancies but greatly reduce them for devices that
only vary by name or antennas.  the parameters that are more
likely to change within a given device family are left in iwl_cfg.
also separate bt param structure added to help reduce more.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

1 files changed, 23 insertions, 17 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
index 84ad62958535..4c5ab783737f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
@@ -631,7 +631,8 @@ void iwl_sensitivity_calibration(struct iwl_priv *priv, void *resp)
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->cfg->bt_statistics) {
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->bt_statistics) {
 		rx_info = &(((struct iwl_bt_notif_statistics *)resp)->
 			      rx.general.common);
 		ofdm = &(((struct iwl_bt_notif_statistics *)resp)->rx.ofdm);
@@ -786,7 +787,8 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->cfg->bt_statistics) {
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->bt_statistics) {
 		rx_info = &(((struct iwl_bt_notif_statistics *)stat_resp)->
 			      rx.general.common);
 	} else {
@@ -801,7 +803,8 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 
 	rxon_band24 = !!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK);
 	rxon_chnum = le16_to_cpu(ctx->staging.channel);
-	if (priv->cfg->bt_statistics) {
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->bt_statistics) {
 		stat_band24 = !!(((struct iwl_bt_notif_statistics *)
 				 stat_resp)->flag &
 				 STATISTICS_REPLY_FLG_BAND_24G_MSK);
@@ -861,16 +864,17 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 	/* If this is the "chain_noise_num_beacons", determine:
 	 * 1)  Disconnected antennas (using signal strengths)
 	 * 2)  Differential gain (using silence noise) to balance receivers */
-	if (data->beacon_count != priv->cfg->chain_noise_num_beacons)
+	if (data->beacon_count !=
+		priv->cfg->base_params->chain_noise_num_beacons)
 		return;
 
 	/* Analyze signal for disconnected antenna */
-	average_sig[0] =
-		(data->chain_signal_a) / priv->cfg->chain_noise_num_beacons;
-	average_sig[1] =
-		(data->chain_signal_b) / priv->cfg->chain_noise_num_beacons;
-	average_sig[2] =
-		(data->chain_signal_c) / priv->cfg->chain_noise_num_beacons;
+	average_sig[0] = data->chain_signal_a /
+			 priv->cfg->base_params->chain_noise_num_beacons;
+	average_sig[1] = data->chain_signal_b /
+			 priv->cfg->base_params->chain_noise_num_beacons;
+	average_sig[2] = data->chain_signal_c /
+			 priv->cfg->base_params->chain_noise_num_beacons;
 
 	if (average_sig[0] >= average_sig[1]) {
 		max_average_sig = average_sig[0];
@@ -920,7 +924,9 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 	 * To be safe, simply mask out any chains that we know
 	 * are not on the device.
 	 */
-	if (priv->cfg->advanced_bt_coexist && priv->bt_full_concurrent) {
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    priv->bt_full_concurrent) {
 		/* operated as 1x1 in full concurrency mode */
 		active_chains &= first_antenna(priv->hw_params.valid_rx_ant);
 	} else
@@ -967,12 +973,12 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 			active_chains);
 
 	/* Analyze noise for rx balance */
-	average_noise[0] =
-		((data->chain_noise_a) / priv->cfg->chain_noise_num_beacons);
-	average_noise[1] =
-		((data->chain_noise_b) / priv->cfg->chain_noise_num_beacons);
-	average_noise[2] =
-		((data->chain_noise_c) / priv->cfg->chain_noise_num_beacons);
+	average_noise[0] = data->chain_noise_a /
+			   priv->cfg->base_params->chain_noise_num_beacons;
+	average_noise[1] = data->chain_noise_b /
+			   priv->cfg->base_params->chain_noise_num_beacons;
+	average_noise[2] = data->chain_noise_c /
+			   priv->cfg->base_params->chain_noise_num_beacons;
 
 	for (i = 0; i < NUM_RX_CHAINS; i++) {
 		if (!(data->disconn_array[i]) &&