iwlwifi: move DVM code into subdirectory

Since we're working on another mode/driver
inside iwlwifi, move the current one into a
subdirectory to more cleanly separate the
code. While at it, rename all the files.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 1577 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c
new file mode 100644
index 000000000000..4f55689ac6a7
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c
@@ -0,0 +1,1577 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/etherdevice.h>
+#include "iwl-trans.h"
+#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
+#include "calib.h"
+
+/*
+ * initialize rxon structure with default values from eeprom
+ */
+void iwl_connection_init_rx_config(struct iwl_priv *priv,
+				   struct iwl_rxon_context *ctx)
+{
+	memset(&ctx->staging, 0, sizeof(ctx->staging));
+
+	if (!ctx->vif) {
+		ctx->staging.dev_type = ctx->unused_devtype;
+	} else
+	switch (ctx->vif->type) {
+	case NL80211_IFTYPE_AP:
+		ctx->staging.dev_type = ctx->ap_devtype;
+		break;
+
+	case NL80211_IFTYPE_STATION:
+		ctx->staging.dev_type = ctx->station_devtype;
+		ctx->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+
+	case NL80211_IFTYPE_ADHOC:
+		ctx->staging.dev_type = ctx->ibss_devtype;
+		ctx->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
+		ctx->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
+						  RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+
+	case NL80211_IFTYPE_MONITOR:
+		ctx->staging.dev_type = RXON_DEV_TYPE_SNIFFER;
+		break;
+
+	default:
+		IWL_ERR(priv, "Unsupported interface type %d\n",
+			ctx->vif->type);
+		break;
+	}
+
+#if 0
+	/* TODO:  Figure out when short_preamble would be set and cache from
+	 * that */
+	if (!hw_to_local(priv->hw)->short_preamble)
+		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+#endif
+
+	ctx->staging.channel = cpu_to_le16(priv->hw->conf.channel->hw_value);
+	priv->band = priv->hw->conf.channel->band;
+
+	iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif);
+
+	/* clear both MIX and PURE40 mode flag */
+	ctx->staging.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED |
+					RXON_FLG_CHANNEL_MODE_PURE_40);
+	if (ctx->vif)
+		memcpy(ctx->staging.node_addr, ctx->vif->addr, ETH_ALEN);
+
+	ctx->staging.ofdm_ht_single_stream_basic_rates = 0xff;
+	ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff;
+	ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff;
+}
+
+static int iwlagn_disable_bss(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx,
+			      struct iwl_rxon_cmd *send)
+{
+	__le32 old_filter = send->filter_flags;
+	int ret;
+
+	send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd,
+				CMD_SYNC, sizeof(*send), send);
+
+	send->filter_flags = old_filter;
+
+	if (ret)
+		IWL_DEBUG_QUIET_RFKILL(priv,
+			"Error clearing ASSOC_MSK on BSS (%d)\n", ret);
+
+	return ret;
+}
+
+static int iwlagn_disable_pan(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx,
+			      struct iwl_rxon_cmd *send)
+{
+	struct iwl_notification_wait disable_wait;
+	__le32 old_filter = send->filter_flags;
+	u8 old_dev_type = send->dev_type;
+	int ret;
+	static const u8 deactivate_cmd[] = {
+		REPLY_WIPAN_DEACTIVATION_COMPLETE
+	};
+
+	iwl_init_notification_wait(&priv->notif_wait, &disable_wait,
+				   deactivate_cmd, ARRAY_SIZE(deactivate_cmd),
+				   NULL, NULL);
+
+	send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	send->dev_type = RXON_DEV_TYPE_P2P;
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd,
+				CMD_SYNC, sizeof(*send), send);
+
+	send->filter_flags = old_filter;
+	send->dev_type = old_dev_type;
+
+	if (ret) {
+		IWL_ERR(priv, "Error disabling PAN (%d)\n", ret);
+		iwl_remove_notification(&priv->notif_wait, &disable_wait);
+	} else {
+		ret = iwl_wait_notification(&priv->notif_wait,
+					    &disable_wait, HZ);
+		if (ret)
+			IWL_ERR(priv, "Timed out waiting for PAN disable\n");
+	}
+
+	return ret;
+}
+
+static int iwlagn_disconn_pan(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx,
+			      struct iwl_rxon_cmd *send)
+{
+	__le32 old_filter = send->filter_flags;
+	int ret;
+
+	send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC,
+				sizeof(*send), send);
+
+	send->filter_flags = old_filter;
+
+	return ret;
+}
+
+static void iwlagn_update_qos(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx)
+{
+	int ret;
+
+	if (!ctx->is_active)
+		return;
+
+	ctx->qos_data.def_qos_parm.qos_flags = 0;
+
+	if (ctx->qos_data.qos_active)
+		ctx->qos_data.def_qos_parm.qos_flags |=
+			QOS_PARAM_FLG_UPDATE_EDCA_MSK;
+
+	if (ctx->ht.enabled)
+		ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
+
+	IWL_DEBUG_INFO(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
+		      ctx->qos_data.qos_active,
+		      ctx->qos_data.def_qos_parm.qos_flags);
+
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->qos_cmd, CMD_SYNC,
+			       sizeof(struct iwl_qosparam_cmd),
+			       &ctx->qos_data.def_qos_parm);
+	if (ret)
+		IWL_DEBUG_QUIET_RFKILL(priv, "Failed to update QoS\n");
+}
+
+static int iwlagn_update_beacon(struct iwl_priv *priv,
+				struct ieee80211_vif *vif)
+{
+	lockdep_assert_held(&priv->mutex);
+
+	dev_kfree_skb(priv->beacon_skb);
+	priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif);
+	if (!priv->beacon_skb)
+		return -ENOMEM;
+	return iwlagn_send_beacon_cmd(priv);
+}
+
+static int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
+				  struct iwl_rxon_context *ctx)
+{
+	int ret = 0;
+	struct iwl_rxon_assoc_cmd rxon_assoc;
+	const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
+	const struct iwl_rxon_cmd *rxon2 = &ctx->active;
+
+	if ((rxon1->flags == rxon2->flags) &&
+	    (rxon1->filter_flags == rxon2->filter_flags) &&
+	    (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
+	    (rxon1->ofdm_ht_single_stream_basic_rates ==
+	     rxon2->ofdm_ht_single_stream_basic_rates) &&
+	    (rxon1->ofdm_ht_dual_stream_basic_rates ==
+	     rxon2->ofdm_ht_dual_stream_basic_rates) &&
+	    (rxon1->ofdm_ht_triple_stream_basic_rates ==
+	     rxon2->ofdm_ht_triple_stream_basic_rates) &&
+	    (rxon1->acquisition_data == rxon2->acquisition_data) &&
+	    (rxon1->rx_chain == rxon2->rx_chain) &&
+	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
+		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
+		return 0;
+	}
+
+	rxon_assoc.flags = ctx->staging.flags;
+	rxon_assoc.filter_flags = ctx->staging.filter_flags;
+	rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
+	rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
+	rxon_assoc.reserved1 = 0;
+	rxon_assoc.reserved2 = 0;
+	rxon_assoc.reserved3 = 0;
+	rxon_assoc.ofdm_ht_single_stream_basic_rates =
+	    ctx->staging.ofdm_ht_single_stream_basic_rates;
+	rxon_assoc.ofdm_ht_dual_stream_basic_rates =
+	    ctx->staging.ofdm_ht_dual_stream_basic_rates;
+	rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
+	rxon_assoc.ofdm_ht_triple_stream_basic_rates =
+		 ctx->staging.ofdm_ht_triple_stream_basic_rates;
+	rxon_assoc.acquisition_data = ctx->staging.acquisition_data;
+
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_assoc_cmd,
+				CMD_ASYNC, sizeof(rxon_assoc), &rxon_assoc);
+	return ret;
+}
+
+static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
+{
+	u16 new_val;
+	u16 beacon_factor;
+
+	/*
+	 * If mac80211 hasn't given us a beacon interval, program
+	 * the default into the device (not checking this here
+	 * would cause the adjustment below to return the maximum
+	 * value, which may break PAN.)
+	 */
+	if (!beacon_val)
+		return DEFAULT_BEACON_INTERVAL;
+
+	/*
+	 * If the beacon interval we obtained from the peer
+	 * is too large, we'll have to wake up more often
+	 * (and in IBSS case, we'll beacon too much)
+	 *
+	 * For example, if max_beacon_val is 4096, and the
+	 * requested beacon interval is 7000, we'll have to
+	 * use 3500 to be able to wake up on the beacons.
+	 *
+	 * This could badly influence beacon detection stats.
+	 */
+
+	beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val;
+	new_val = beacon_val / beacon_factor;
+
+	if (!new_val)
+		new_val = max_beacon_val;
+
+	return new_val;
+}
+
+static int iwl_send_rxon_timing(struct iwl_priv *priv,
+				struct iwl_rxon_context *ctx)
+{
+	u64 tsf;
+	s32 interval_tm, rem;
+	struct ieee80211_conf *conf = NULL;
+	u16 beacon_int;
+	struct ieee80211_vif *vif = ctx->vif;
+
+	conf = &priv->hw->conf;
+
+	lockdep_assert_held(&priv->mutex);
+
+	memset(&ctx->timing, 0, sizeof(struct iwl_rxon_time_cmd));
+
+	ctx->timing.timestamp = cpu_to_le64(priv->timestamp);
+	ctx->timing.listen_interval = cpu_to_le16(conf->listen_interval);
+
+	beacon_int = vif ? vif->bss_conf.beacon_int : 0;
+
+	/*
+	 * TODO: For IBSS we need to get atim_window from mac80211,
+	 *	 for now just always use 0
+	 */
+	ctx->timing.atim_window = 0;
+
+	if (ctx->ctxid == IWL_RXON_CTX_PAN &&
+	    (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION) &&
+	    iwl_is_associated(priv, IWL_RXON_CTX_BSS) &&
+	    priv->contexts[IWL_RXON_CTX_BSS].vif &&
+	    priv->contexts[IWL_RXON_CTX_BSS].vif->bss_conf.beacon_int) {
+		ctx->timing.beacon_interval =
+			priv->contexts[IWL_RXON_CTX_BSS].timing.beacon_interval;
+		beacon_int = le16_to_cpu(ctx->timing.beacon_interval);
+	} else if (ctx->ctxid == IWL_RXON_CTX_BSS &&
+		   iwl_is_associated(priv, IWL_RXON_CTX_PAN) &&
+		   priv->contexts[IWL_RXON_CTX_PAN].vif &&
+		   priv->contexts[IWL_RXON_CTX_PAN].vif->bss_conf.beacon_int &&
+		   (!iwl_is_associated_ctx(ctx) || !ctx->vif ||
+		    !ctx->vif->bss_conf.beacon_int)) {
+		ctx->timing.beacon_interval =
+			priv->contexts[IWL_RXON_CTX_PAN].timing.beacon_interval;
+		beacon_int = le16_to_cpu(ctx->timing.beacon_interval);
+	} else {
+		beacon_int = iwl_adjust_beacon_interval(beacon_int,
+			IWL_MAX_UCODE_BEACON_INTERVAL * TIME_UNIT);
+		ctx->timing.beacon_interval = cpu_to_le16(beacon_int);
+	}
+
+	ctx->beacon_int = beacon_int;
+
+	tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */
+	interval_tm = beacon_int * TIME_UNIT;
+	rem = do_div(tsf, interval_tm);
+	ctx->timing.beacon_init_val = cpu_to_le32(interval_tm - rem);
+
+	ctx->timing.dtim_period = vif ? (vif->bss_conf.dtim_period ?: 1) : 1;
+
+	IWL_DEBUG_ASSOC(priv,
+			"beacon interval %d beacon timer %d beacon tim %d\n",
+			le16_to_cpu(ctx->timing.beacon_interval),
+			le32_to_cpu(ctx->timing.beacon_init_val),
+			le16_to_cpu(ctx->timing.atim_window));
+
+	return iwl_dvm_send_cmd_pdu(priv, ctx->rxon_timing_cmd,
+				CMD_SYNC, sizeof(ctx->timing), &ctx->timing);
+}
+
+static int iwlagn_rxon_disconn(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx)
+{
+	int ret;
+	struct iwl_rxon_cmd *active = (void *)&ctx->active;
+
+	if (ctx->ctxid == IWL_RXON_CTX_BSS) {
+		ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
+	} else {
+		ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
+		if (ret)
+			return ret;
+		if (ctx->vif) {
+			ret = iwl_send_rxon_timing(priv, ctx);
+			if (ret) {
+				IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
+				return ret;
+			}
+			ret = iwlagn_disconn_pan(priv, ctx, &ctx->staging);
+		}
+	}
+	if (ret)
+		return ret;
+
+	/*
+	 * Un-assoc RXON clears the station table and WEP
+	 * keys, so we have to restore those afterwards.
+	 */
+	iwl_clear_ucode_stations(priv, ctx);
+	/* update -- might need P2P now */
+	iwl_update_bcast_station(priv, ctx);
+	iwl_restore_stations(priv, ctx);
+	ret = iwl_restore_default_wep_keys(priv, ctx);
+	if (ret) {
+		IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
+		return ret;
+	}
+
+	memcpy(active, &ctx->staging, sizeof(*active));
+	return 0;
+}
+
+static int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
+{
+	int ret;
+	s8 prev_tx_power;
+	bool defer;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	if (priv->calib_disabled & IWL_TX_POWER_CALIB_DISABLED)
+		return 0;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (priv->tx_power_user_lmt == tx_power && !force)
+		return 0;
+
+	if (tx_power < IWLAGN_TX_POWER_TARGET_POWER_MIN) {
+		IWL_WARN(priv,
+			 "Requested user TXPOWER %d below lower limit %d.\n",
+			 tx_power,
+			 IWLAGN_TX_POWER_TARGET_POWER_MIN);
+		return -EINVAL;
+	}
+
+	if (tx_power > priv->tx_power_device_lmt) {
+		IWL_WARN(priv,
+			"Requested user TXPOWER %d above upper limit %d.\n",
+			 tx_power, priv->tx_power_device_lmt);
+		return -EINVAL;
+	}
+
+	if (!iwl_is_ready_rf(priv))
+		return -EIO;
+
+	/* scan complete and commit_rxon use tx_power_next value,
+	 * it always need to be updated for newest request */
+	priv->tx_power_next = tx_power;
+
+	/* do not set tx power when scanning or channel changing */
+	defer = test_bit(STATUS_SCANNING, &priv->status) ||
+		memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging));
+	if (defer && !force) {
+		IWL_DEBUG_INFO(priv, "Deferring tx power set\n");
+		return 0;
+	}
+
+	prev_tx_power = priv->tx_power_user_lmt;
+	priv->tx_power_user_lmt = tx_power;
+
+	ret = iwlagn_send_tx_power(priv);
+
+	/* if fail to set tx_power, restore the orig. tx power */
+	if (ret) {
+		priv->tx_power_user_lmt = prev_tx_power;
+		priv->tx_power_next = prev_tx_power;
+	}
+	return ret;
+}
+
+static int iwlagn_rxon_connect(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx)
+{
+	int ret;
+	struct iwl_rxon_cmd *active = (void *)&ctx->active;
+
+	/* RXON timing must be before associated RXON */
+	if (ctx->ctxid == IWL_RXON_CTX_BSS) {
+		ret = iwl_send_rxon_timing(priv, ctx);
+		if (ret) {
+			IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
+			return ret;
+		}
+	}
+	/* QoS info may be cleared by previous un-assoc RXON */
+	iwlagn_update_qos(priv, ctx);
+
+	/*
+	 * We'll run into this code path when beaconing is
+	 * enabled, but then we also need to send the beacon
+	 * to the device.
+	 */
+	if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
+		ret = iwlagn_update_beacon(priv, ctx->vif);
+		if (ret) {
+			IWL_ERR(priv,
+				"Error sending required beacon (%d)!\n",
+				ret);
+			return ret;
+		}
+	}
+
+	priv->start_calib = 0;
+	/*
+	 * Apply the new configuration.
+	 *
+	 * Associated RXON doesn't clear the station table in uCode,
+	 * so we don't need to restore stations etc. after this.
+	 */
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC,
+		      sizeof(struct iwl_rxon_cmd), &ctx->staging);
+	if (ret) {
+		IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
+		return ret;
+	}
+	memcpy(active, &ctx->staging, sizeof(*active));
+
+	/* IBSS beacon needs to be sent after setting assoc */
+	if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
+		if (iwlagn_update_beacon(priv, ctx->vif))
+			IWL_ERR(priv, "Error sending IBSS beacon\n");
+	iwl_init_sensitivity(priv);
+
+	/*
+	 * If we issue a new RXON command which required a tune then
+	 * we must send a new TXPOWER command or we won't be able to
+	 * Tx any frames.
+	 *
+	 * It's expected we set power here if channel is changing.
+	 */
+	ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
+	if (ret) {
+		IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
+		return ret;
+	}
+
+	if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION &&
+	    priv->cfg->ht_params && priv->cfg->ht_params->smps_mode)
+		ieee80211_request_smps(ctx->vif,
+				       priv->cfg->ht_params->smps_mode);
+
+	return 0;
+}
+
+int iwlagn_set_pan_params(struct iwl_priv *priv)
+{
+	struct iwl_wipan_params_cmd cmd;
+	struct iwl_rxon_context *ctx_bss, *ctx_pan;
+	int slot0 = 300, slot1 = 0;
+	int ret;
+
+	if (priv->valid_contexts == BIT(IWL_RXON_CTX_BSS))
+		return 0;
+
+	BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+
+	lockdep_assert_held(&priv->mutex);
+
+	ctx_bss = &priv->contexts[IWL_RXON_CTX_BSS];
+	ctx_pan = &priv->contexts[IWL_RXON_CTX_PAN];
+
+	/*
+	 * If the PAN context is inactive, then we don't need
+	 * to update the PAN parameters, the last thing we'll
+	 * have done before it goes inactive is making the PAN
+	 * parameters be WLAN-only.
+	 */
+	if (!ctx_pan->is_active)
+		return 0;
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	/* only 2 slots are currently allowed */
+	cmd.num_slots = 2;
+
+	cmd.slots[0].type = 0; /* BSS */
+	cmd.slots[1].type = 1; /* PAN */
+
+	if (priv->hw_roc_setup) {
+		/* both contexts must be used for this to happen */
+		slot1 = IWL_MIN_SLOT_TIME;
+		slot0 = 3000;
+	} else if (ctx_bss->vif && ctx_pan->vif) {
+		int bcnint = ctx_pan->beacon_int;
+		int dtim = ctx_pan->vif->bss_conf.dtim_period ?: 1;
+
+		/* should be set, but seems unused?? */
+		cmd.flags |= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE);
+
+		if (ctx_pan->vif->type == NL80211_IFTYPE_AP &&
+		    bcnint &&
+		    bcnint != ctx_bss->beacon_int) {
+			IWL_ERR(priv,
+				"beacon intervals don't match (%d, %d)\n",
+				ctx_bss->beacon_int, ctx_pan->beacon_int);
+		} else
+			bcnint = max_t(int, bcnint,
+				       ctx_bss->beacon_int);
+		if (!bcnint)
+			bcnint = DEFAULT_BEACON_INTERVAL;
+		slot0 = bcnint / 2;
+		slot1 = bcnint - slot0;
+
+		if (test_bit(STATUS_SCAN_HW, &priv->status) ||
+		    (!ctx_bss->vif->bss_conf.idle &&
+		     !ctx_bss->vif->bss_conf.assoc)) {
+			slot0 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME;
+			slot1 = IWL_MIN_SLOT_TIME;
+		} else if (!ctx_pan->vif->bss_conf.idle &&
+			   !ctx_pan->vif->bss_conf.assoc) {
+			slot1 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME;
+			slot0 = IWL_MIN_SLOT_TIME;
+		}
+	} else if (ctx_pan->vif) {
+		slot0 = 0;
+		slot1 = max_t(int, 1, ctx_pan->vif->bss_conf.dtim_period) *
+					ctx_pan->beacon_int;
+		slot1 = max_t(int, DEFAULT_BEACON_INTERVAL, slot1);
+
+		if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+			slot0 = slot1 * 3 - IWL_MIN_SLOT_TIME;
+			slot1 = IWL_MIN_SLOT_TIME;
+		}
+	}
+
+	cmd.slots[0].width = cpu_to_le16(slot0);
+	cmd.slots[1].width = cpu_to_le16(slot1);
+
+	ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WIPAN_PARAMS, CMD_SYNC,
+			sizeof(cmd), &cmd);
+	if (ret)
+		IWL_ERR(priv, "Error setting PAN parameters (%d)\n", ret);
+
+	return ret;
+}
+
+static void _iwl_set_rxon_ht(struct iwl_priv *priv,
+			     struct iwl_ht_config *ht_conf,
+			     struct iwl_rxon_context *ctx)
+{
+	struct iwl_rxon_cmd *rxon = &ctx->staging;
+
+	if (!ctx->ht.enabled) {
+		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+			RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
+			RXON_FLG_HT40_PROT_MSK |
+			RXON_FLG_HT_PROT_MSK);
+		return;
+	}
+
+	/* FIXME: if the definition of ht.protection changed, the "translation"
+	 * will be needed for rxon->flags
+	 */
+	rxon->flags |= cpu_to_le32(ctx->ht.protection <<
+				   RXON_FLG_HT_OPERATING_MODE_POS);
+
+	/* Set up channel bandwidth:
+	 * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */
+	/* clear the HT channel mode before set the mode */
+	rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+			 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+	if (iwl_is_ht40_tx_allowed(priv, ctx, NULL)) {
+		/* pure ht40 */
+		if (ctx->ht.protection ==
+		    IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
+			rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
+			/*
+			 * Note: control channel is opposite of extension
+			 * channel
+			 */
+			switch (ctx->ht.extension_chan_offset) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				rxon->flags &=
+					~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				rxon->flags |=
+					RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				break;
+			}
+		} else {
+			/*
+			 * Note: control channel is opposite of extension
+			 * channel
+			 */
+			switch (ctx->ht.extension_chan_offset) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				rxon->flags &=
+					~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_NONE:
+			default:
+				/*
+				 * channel location only valid if in Mixed
+				 * mode
+				 */
+				IWL_ERR(priv,
+					"invalid extension channel offset\n");
+				break;
+			}
+		}
+	} else {
+		rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY;
+	}
+
+	iwlagn_set_rxon_chain(priv, ctx);
+
+	IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X "
+			"extension channel offset 0x%x\n",
+			le32_to_cpu(rxon->flags), ctx->ht.protection,
+			ctx->ht.extension_chan_offset);
+}
+
+void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf)
+{
+	struct iwl_rxon_context *ctx;
+
+	for_each_context(priv, ctx)
+		_iwl_set_rxon_ht(priv, ht_conf, ctx);
+}
+
+/**
+ * iwl_set_rxon_channel - Set the band and channel values in staging RXON
+ * @ch: requested channel as a pointer to struct ieee80211_channel
+
+ * NOTE:  Does not commit to the hardware; it sets appropriate bit fields
+ * in the staging RXON flag structure based on the ch->band
+ */
+void iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
+			 struct iwl_rxon_context *ctx)
+{
+	enum ieee80211_band band = ch->band;
+	u16 channel = ch->hw_value;
+
+	if ((le16_to_cpu(ctx->staging.channel) == channel) &&
+	    (priv->band == band))
+		return;
+
+	ctx->staging.channel = cpu_to_le16(channel);
+	if (band == IEEE80211_BAND_5GHZ)
+		ctx->staging.flags &= ~RXON_FLG_BAND_24G_MSK;
+	else
+		ctx->staging.flags |= RXON_FLG_BAND_24G_MSK;
+
+	priv->band = band;
+
+	IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band);
+
+}
+
+void iwl_set_flags_for_band(struct iwl_priv *priv,
+			    struct iwl_rxon_context *ctx,
+			    enum ieee80211_band band,
+			    struct ieee80211_vif *vif)
+{
+	if (band == IEEE80211_BAND_5GHZ) {
+		ctx->staging.flags &=
+		    ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
+		      | RXON_FLG_CCK_MSK);
+		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+	} else {
+		/* Copied from iwl_post_associate() */
+		if (vif && vif->bss_conf.use_short_slot)
+			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+		ctx->staging.flags |= RXON_FLG_BAND_24G_MSK;
+		ctx->staging.flags |= RXON_FLG_AUTO_DETECT_MSK;
+		ctx->staging.flags &= ~RXON_FLG_CCK_MSK;
+	}
+}
+
+static void iwl_set_rxon_hwcrypto(struct iwl_priv *priv,
+				  struct iwl_rxon_context *ctx, int hw_decrypt)
+{
+	struct iwl_rxon_cmd *rxon = &ctx->staging;
+
+	if (hw_decrypt)
+		rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
+	else
+		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
+
+}
+
+/* validate RXON structure is valid */
+static int iwl_check_rxon_cmd(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx)
+{
+	struct iwl_rxon_cmd *rxon = &ctx->staging;
+	u32 errors = 0;
+
+	if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
+		if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) {
+			IWL_WARN(priv, "check 2.4G: wrong narrow\n");
+			errors |= BIT(0);
+		}
+		if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) {
+			IWL_WARN(priv, "check 2.4G: wrong radar\n");
+			errors |= BIT(1);
+		}
+	} else {
+		if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) {
+			IWL_WARN(priv, "check 5.2G: not short slot!\n");
+			errors |= BIT(2);
+		}
+		if (rxon->flags & RXON_FLG_CCK_MSK) {
+			IWL_WARN(priv, "check 5.2G: CCK!\n");
+			errors |= BIT(3);
+		}
+	}
+	if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) {
+		IWL_WARN(priv, "mac/bssid mcast!\n");
+		errors |= BIT(4);
+	}
+
+	/* make sure basic rates 6Mbps and 1Mbps are supported */
+	if ((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0 &&
+	    (rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0) {
+		IWL_WARN(priv, "neither 1 nor 6 are basic\n");
+		errors |= BIT(5);
+	}
+
+	if (le16_to_cpu(rxon->assoc_id) > 2007) {
+		IWL_WARN(priv, "aid > 2007\n");
+		errors |= BIT(6);
+	}
+
+	if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
+			== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) {
+		IWL_WARN(priv, "CCK and short slot\n");
+		errors |= BIT(7);
+	}
+
+	if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
+			== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) {
+		IWL_WARN(priv, "CCK and auto detect");
+		errors |= BIT(8);
+	}
+
+	if ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
+			    RXON_FLG_TGG_PROTECT_MSK)) ==
+			    RXON_FLG_TGG_PROTECT_MSK) {
+		IWL_WARN(priv, "TGg but no auto-detect\n");
+		errors |= BIT(9);
+	}
+
+	if (rxon->channel == 0) {
+		IWL_WARN(priv, "zero channel is invalid\n");
+		errors |= BIT(10);
+	}
+
+	WARN(errors, "Invalid RXON (%#x), channel %d",
+	     errors, le16_to_cpu(rxon->channel));
+
+	return errors ? -EINVAL : 0;
+}
+
+/**
+ * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
+ * @priv: staging_rxon is compared to active_rxon
+ *
+ * If the RXON structure is changing enough to require a new tune,
+ * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
+ * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
+ */
+static int iwl_full_rxon_required(struct iwl_priv *priv,
+				  struct iwl_rxon_context *ctx)
+{
+	const struct iwl_rxon_cmd *staging = &ctx->staging;
+	const struct iwl_rxon_cmd *active = &ctx->active;
+
+#define CHK(cond)							\
+	if ((cond)) {							\
+		IWL_DEBUG_INFO(priv, "need full RXON - " #cond "\n");	\
+		return 1;						\
+	}
+
+#define CHK_NEQ(c1, c2)						\
+	if ((c1) != (c2)) {					\
+		IWL_DEBUG_INFO(priv, "need full RXON - "	\
+			       #c1 " != " #c2 " - %d != %d\n",	\
+			       (c1), (c2));			\
+		return 1;					\
+	}
+
+	/* These items are only settable from the full RXON command */
+	CHK(!iwl_is_associated_ctx(ctx));
+	CHK(!ether_addr_equal(staging->bssid_addr, active->bssid_addr));
+	CHK(!ether_addr_equal(staging->node_addr, active->node_addr));
+	CHK(!ether_addr_equal(staging->wlap_bssid_addr,
+			      active->wlap_bssid_addr));
+	CHK_NEQ(staging->dev_type, active->dev_type);
+	CHK_NEQ(staging->channel, active->channel);
+	CHK_NEQ(staging->air_propagation, active->air_propagation);
+	CHK_NEQ(staging->ofdm_ht_single_stream_basic_rates,
+		active->ofdm_ht_single_stream_basic_rates);
+	CHK_NEQ(staging->ofdm_ht_dual_stream_basic_rates,
+		active->ofdm_ht_dual_stream_basic_rates);
+	CHK_NEQ(staging->ofdm_ht_triple_stream_basic_rates,
+		active->ofdm_ht_triple_stream_basic_rates);
+	CHK_NEQ(staging->assoc_id, active->assoc_id);
+
+	/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
+	 * be updated with the RXON_ASSOC command -- however only some
+	 * flag transitions are allowed using RXON_ASSOC */
+
+	/* Check if we are not switching bands */
+	CHK_NEQ(staging->flags & RXON_FLG_BAND_24G_MSK,
+		active->flags & RXON_FLG_BAND_24G_MSK);
+
+	/* Check if we are switching association toggle */
+	CHK_NEQ(staging->filter_flags & RXON_FILTER_ASSOC_MSK,
+		active->filter_flags & RXON_FILTER_ASSOC_MSK);
+
+#undef CHK
+#undef CHK_NEQ
+
+	return 0;
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+void iwl_print_rx_config_cmd(struct iwl_priv *priv,
+			     enum iwl_rxon_context_id ctxid)
+{
+	struct iwl_rxon_context *ctx = &priv->contexts[ctxid];
+	struct iwl_rxon_cmd *rxon = &ctx->staging;
+
+	IWL_DEBUG_RADIO(priv, "RX CONFIG:\n");
+	iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
+	IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n",
+			le16_to_cpu(rxon->channel));
+	IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n",
+			le32_to_cpu(rxon->flags));
+	IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n",
+			le32_to_cpu(rxon->filter_flags));
+	IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type);
+	IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n",
+			rxon->ofdm_basic_rates);
+	IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n",
+			rxon->cck_basic_rates);
+	IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr);
+	IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
+	IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n",
+			le16_to_cpu(rxon->assoc_id));
+}
+#endif
+
+static void iwl_calc_basic_rates(struct iwl_priv *priv,
+				 struct iwl_rxon_context *ctx)
+{
+	int lowest_present_ofdm = 100;
+	int lowest_present_cck = 100;
+	u8 cck = 0;
+	u8 ofdm = 0;
+
+	if (ctx->vif) {
+		struct ieee80211_supported_band *sband;
+		unsigned long basic = ctx->vif->bss_conf.basic_rates;
+		int i;
+
+		sband = priv->hw->wiphy->bands[priv->hw->conf.channel->band];
+
+		for_each_set_bit(i, &basic, BITS_PER_LONG) {
+			int hw = sband->bitrates[i].hw_value;
+			if (hw >= IWL_FIRST_OFDM_RATE) {
+				ofdm |= BIT(hw - IWL_FIRST_OFDM_RATE);
+				if (lowest_present_ofdm > hw)
+					lowest_present_ofdm = hw;
+			} else {
+				BUILD_BUG_ON(IWL_FIRST_CCK_RATE != 0);
+
+				cck |= BIT(hw);
+				if (lowest_present_cck > hw)
+					lowest_present_cck = hw;
+			}
+		}
+	}
+
+	/*
+	 * Now we've got the basic rates as bitmaps in the ofdm and cck
+	 * variables. This isn't sufficient though, as there might not
+	 * be all the right rates in the bitmap. E.g. if the only basic
+	 * rates are 5.5 Mbps and 11 Mbps, we still need to add 1 Mbps
+	 * and 6 Mbps because the 802.11-2007 standard says in 9.6:
+	 *
+	 *    [...] a STA responding to a received frame shall transmit
+	 *    its Control Response frame [...] at the highest rate in the
+	 *    BSSBasicRateSet parameter that is less than or equal to the
+	 *    rate of the immediately previous frame in the frame exchange
+	 *    sequence ([...]) and that is of the same modulation class
+	 *    ([...]) as the received frame. If no rate contained in the
+	 *    BSSBasicRateSet parameter meets these conditions, then the
+	 *    control frame sent in response to a received frame shall be
+	 *    transmitted at the highest mandatory rate of the PHY that is
+	 *    less than or equal to the rate of the received frame, and
+	 *    that is of the same modulation class as the received frame.
+	 *
+	 * As a consequence, we need to add all mandatory rates that are
+	 * lower than all of the basic rates to these bitmaps.
+	 */
+
+	if (IWL_RATE_24M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_24M_MASK >> IWL_FIRST_OFDM_RATE;
+	if (IWL_RATE_12M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_12M_MASK >> IWL_FIRST_OFDM_RATE;
+	/* 6M already there or needed so always add */
+	ofdm |= IWL_RATE_6M_MASK >> IWL_FIRST_OFDM_RATE;
+
+	/*
+	 * CCK is a bit more complex with DSSS vs. HR/DSSS vs. ERP.
+	 * Note, however:
+	 *  - if no CCK rates are basic, it must be ERP since there must
+	 *    be some basic rates at all, so they're OFDM => ERP PHY
+	 *    (or we're in 5 GHz, and the cck bitmap will never be used)
+	 *  - if 11M is a basic rate, it must be ERP as well, so add 5.5M
+	 *  - if 5.5M is basic, 1M and 2M are mandatory
+	 *  - if 2M is basic, 1M is mandatory
+	 *  - if 1M is basic, that's the only valid ACK rate.
+	 * As a consequence, it's not as complicated as it sounds, just add
+	 * any lower rates to the ACK rate bitmap.
+	 */
+	if (IWL_RATE_11M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE;
+	if (IWL_RATE_5M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE;
+	if (IWL_RATE_2M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE;
+	/* 1M already there or needed so always add */
+	cck |= IWL_RATE_1M_MASK >> IWL_FIRST_CCK_RATE;
+
+	IWL_DEBUG_RATE(priv, "Set basic rates cck:0x%.2x ofdm:0x%.2x\n",
+		       cck, ofdm);
+
+	/* "basic_rates" is a misnomer here -- should be called ACK rates */
+	ctx->staging.cck_basic_rates = cck;
+	ctx->staging.ofdm_basic_rates = ofdm;
+}
+
+/**
+ * iwlagn_commit_rxon - commit staging_rxon to hardware
+ *
+ * The RXON command in staging_rxon is committed to the hardware and
+ * the active_rxon structure is updated with the new data.  This
+ * function correctly transitions out of the RXON_ASSOC_MSK state if
+ * a HW tune is required based on the RXON structure changes.
+ *
+ * The connect/disconnect flow should be as the following:
+ *
+ * 1. make sure send RXON command with association bit unset if not connect
+ *	this should include the channel and the band for the candidate
+ *	to be connected to
+ * 2. Add Station before RXON association with the AP
+ * 3. RXON_timing has to send before RXON for connection
+ * 4. full RXON command - associated bit set
+ * 5. use RXON_ASSOC command to update any flags changes
+ */
+int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	/* cast away the const for active_rxon in this function */
+	struct iwl_rxon_cmd *active = (void *)&ctx->active;
+	bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!iwl_is_alive(priv))
+		return -EBUSY;
+
+	/* This function hardcodes a bunch of dual-mode assumptions */
+	BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+
+	if (!ctx->is_active)
+		return 0;
+
+	/* always get timestamp with Rx frame */
+	ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
+
+	/* recalculate basic rates */
+	iwl_calc_basic_rates(priv, ctx);
+
+	/*
+	 * force CTS-to-self frames protection if RTS-CTS is not preferred
+	 * one aggregation protection method
+	 */
+	if (!priv->hw_params.use_rts_for_aggregation)
+		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+
+	if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
+	    !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
+		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+	iwl_print_rx_config_cmd(priv, ctx->ctxid);
+	ret = iwl_check_rxon_cmd(priv, ctx);
+	if (ret) {
+		IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * receive commit_rxon request
+	 * abort any previous channel switch if still in process
+	 */
+	if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+	    (priv->switch_channel != ctx->staging.channel)) {
+		IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
+			      le16_to_cpu(priv->switch_channel));
+		iwl_chswitch_done(priv, false);
+	}
+
+	/*
+	 * If we don't need to send a full RXON, we can use
+	 * iwl_rxon_assoc_cmd which is used to reconfigure filter
+	 * and other flags for the current radio configuration.
+	 */
+	if (!iwl_full_rxon_required(priv, ctx)) {
+		ret = iwlagn_send_rxon_assoc(priv, ctx);
+		if (ret) {
+			IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
+			return ret;
+		}
+
+		memcpy(active, &ctx->staging, sizeof(*active));
+		/*
+		 * We do not commit tx power settings while channel changing,
+		 * do it now if after settings changed.
+		 */
+		iwl_set_tx_power(priv, priv->tx_power_next, false);
+
+		/* make sure we are in the right PS state */
+		iwl_power_update_mode(priv, true);
+
+		return 0;
+	}
+
+	iwl_set_rxon_hwcrypto(priv, ctx, !iwlwifi_mod_params.sw_crypto);
+
+	IWL_DEBUG_INFO(priv,
+		       "Going to commit RXON\n"
+		       "  * with%s RXON_FILTER_ASSOC_MSK\n"
+		       "  * channel = %d\n"
+		       "  * bssid = %pM\n",
+		       (new_assoc ? "" : "out"),
+		       le16_to_cpu(ctx->staging.channel),
+		       ctx->staging.bssid_addr);
+
+	/*
+	 * Always clear associated first, but with the correct config.
+	 * This is required as for example station addition for the
+	 * AP station must be done after the BSSID is set to correctly
+	 * set up filters in the device.
+	 */
+	ret = iwlagn_rxon_disconn(priv, ctx);
+	if (ret)
+		return ret;
+
+	ret = iwlagn_set_pan_params(priv);
+	if (ret)
+		return ret;
+
+	if (new_assoc)
+		return iwlagn_rxon_connect(priv, ctx);
+
+	return 0;
+}
+
+void iwlagn_config_ht40(struct ieee80211_conf *conf,
+	struct iwl_rxon_context *ctx)
+{
+	if (conf_is_ht40_minus(conf)) {
+		ctx->ht.extension_chan_offset =
+			IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+		ctx->ht.is_40mhz = true;
+	} else if (conf_is_ht40_plus(conf)) {
+		ctx->ht.extension_chan_offset =
+			IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+		ctx->ht.is_40mhz = true;
+	} else {
+		ctx->ht.extension_chan_offset =
+			IEEE80211_HT_PARAM_CHA_SEC_NONE;
+		ctx->ht.is_40mhz = false;
+	}
+}
+
+int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_rxon_context *ctx;
+	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_channel *channel = conf->channel;
+	int ret = 0;
+
+	IWL_DEBUG_MAC80211(priv, "enter: changed %#x\n", changed);
+
+	mutex_lock(&priv->mutex);
+
+	if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+		goto out;
+	}
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		goto out;
+	}
+
+	if (changed & (IEEE80211_CONF_CHANGE_SMPS |
+		       IEEE80211_CONF_CHANGE_CHANNEL)) {
+		/* mac80211 uses static for non-HT which is what we want */
+		priv->current_ht_config.smps = conf->smps_mode;
+
+		/*
+		 * Recalculate chain counts.
+		 *
+		 * If monitor mode is enabled then mac80211 will
+		 * set up the SM PS mode to OFF if an HT channel is
+		 * configured.
+		 */
+		for_each_context(priv, ctx)
+			iwlagn_set_rxon_chain(priv, ctx);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		for_each_context(priv, ctx) {
+			/* Configure HT40 channels */
+			if (ctx->ht.enabled != conf_is_ht(conf))
+				ctx->ht.enabled = conf_is_ht(conf);
+
+			if (ctx->ht.enabled) {
+				/* if HT40 is used, it should not change
+				 * after associated except channel switch */
+				if (!ctx->ht.is_40mhz ||
+						!iwl_is_associated_ctx(ctx))
+					iwlagn_config_ht40(conf, ctx);
+			} else
+				ctx->ht.is_40mhz = false;
+
+			/*
+			 * Default to no protection. Protection mode will
+			 * later be set from BSS config in iwl_ht_conf
+			 */
+			ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
+
+			/* if we are switching from ht to 2.4 clear flags
+			 * from any ht related info since 2.4 does not
+			 * support ht */
+			if (le16_to_cpu(ctx->staging.channel) !=
+			    channel->hw_value)
+				ctx->staging.flags = 0;
+
+			iwl_set_rxon_channel(priv, channel, ctx);
+			iwl_set_rxon_ht(priv, &priv->current_ht_config);
+
+			iwl_set_flags_for_band(priv, ctx, channel->band,
+					       ctx->vif);
+		}
+
+		iwl_update_bcast_stations(priv);
+	}
+
+	if (changed & (IEEE80211_CONF_CHANGE_PS |
+			IEEE80211_CONF_CHANGE_IDLE)) {
+		ret = iwl_power_update_mode(priv, false);
+		if (ret)
+			IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+			priv->tx_power_user_lmt, conf->power_level);
+
+		iwl_set_tx_power(priv, conf->power_level, false);
+	}
+
+	for_each_context(priv, ctx) {
+		if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+			continue;
+		iwlagn_commit_rxon(priv, ctx);
+	}
+ out:
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return ret;
+}
+
+static void iwlagn_check_needed_chains(struct iwl_priv *priv,
+				       struct iwl_rxon_context *ctx,
+				       struct ieee80211_bss_conf *bss_conf)
+{
+	struct ieee80211_vif *vif = ctx->vif;
+	struct iwl_rxon_context *tmp;
+	struct ieee80211_sta *sta;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
+	struct ieee80211_sta_ht_cap *ht_cap;
+	bool need_multiple;
+
+	lockdep_assert_held(&priv->mutex);
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		rcu_read_lock();
+		sta = ieee80211_find_sta(vif, bss_conf->bssid);
+		if (!sta) {
+			/*
+			 * If at all, this can only happen through a race
+			 * when the AP disconnects us while we're still
+			 * setting up the connection, in that case mac80211
+			 * will soon tell us about that.
+			 */
+			need_multiple = false;
+			rcu_read_unlock();
+			break;
+		}
+
+		ht_cap = &sta->ht_cap;
+
+		need_multiple = true;
+
+		/*
+		 * If the peer advertises no support for receiving 2 and 3
+		 * stream MCS rates, it can't be transmitting them either.
+		 */
+		if (ht_cap->mcs.rx_mask[1] == 0 &&
+		    ht_cap->mcs.rx_mask[2] == 0) {
+			need_multiple = false;
+		} else if (!(ht_cap->mcs.tx_params &
+						IEEE80211_HT_MCS_TX_DEFINED)) {
+			/* If it can't TX MCS at all ... */
+			need_multiple = false;
+		} else if (ht_cap->mcs.tx_params &
+						IEEE80211_HT_MCS_TX_RX_DIFF) {
+			int maxstreams;
+
+			/*
+			 * But if it can receive them, it might still not
+			 * be able to transmit them, which is what we need
+			 * to check here -- so check the number of streams
+			 * it advertises for TX (if different from RX).
+			 */
+
+			maxstreams = (ht_cap->mcs.tx_params &
+				 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK);
+			maxstreams >>=
+				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+			maxstreams += 1;
+
+			if (maxstreams <= 1)
+				need_multiple = false;
+		}
+
+		rcu_read_unlock();
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		/* currently */
+		need_multiple = false;
+		break;
+	default:
+		/* only AP really */
+		need_multiple = true;
+		break;
+	}
+
+	ctx->ht_need_multiple_chains = need_multiple;
+
+	if (!need_multiple) {
+		/* check all contexts */
+		for_each_context(priv, tmp) {
+			if (!tmp->vif)
+				continue;
+			if (tmp->ht_need_multiple_chains) {
+				need_multiple = true;
+				break;
+			}
+		}
+	}
+
+	ht_conf->single_chain_sufficient = !need_multiple;
+}
+
+static void iwlagn_chain_noise_reset(struct iwl_priv *priv)
+{
+	struct iwl_chain_noise_data *data = &priv->chain_noise_data;
+	int ret;
+
+	if (!(priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED))
+		return;
+
+	if ((data->state == IWL_CHAIN_NOISE_ALIVE) &&
+	    iwl_is_any_associated(priv)) {
+		struct iwl_calib_chain_noise_reset_cmd cmd;
+
+		/* clear data for chain noise calibration algorithm */
+		data->chain_noise_a = 0;
+		data->chain_noise_b = 0;
+		data->chain_noise_c = 0;
+		data->chain_signal_a = 0;
+		data->chain_signal_b = 0;
+		data->chain_signal_c = 0;
+		data->beacon_count = 0;
+
+		memset(&cmd, 0, sizeof(cmd));
+		iwl_set_calib_hdr(&cmd.hdr,
+			priv->phy_calib_chain_noise_reset_cmd);
+		ret = iwl_dvm_send_cmd_pdu(priv,
+					REPLY_PHY_CALIBRATION_CMD,
+					CMD_SYNC, sizeof(cmd), &cmd);
+		if (ret)
+			IWL_ERR(priv,
+				"Could not send REPLY_PHY_CALIBRATION_CMD\n");
+		data->state = IWL_CHAIN_NOISE_ACCUMULATE;
+		IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
+	}
+}
+
+void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *bss_conf,
+			     u32 changes)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+	int ret;
+	bool force = false;
+
+	mutex_lock(&priv->mutex);
+
+	if (unlikely(!iwl_is_ready(priv))) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		mutex_unlock(&priv->mutex);
+		return;
+        }
+
+	if (unlikely(!ctx->vif)) {
+		IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	if (changes & BSS_CHANGED_BEACON_INT)
+		force = true;
+
+	if (changes & BSS_CHANGED_QOS) {
+		ctx->qos_data.qos_active = bss_conf->qos;
+		iwlagn_update_qos(priv, ctx);
+	}
+
+	ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
+	if (vif->bss_conf.use_short_preamble)
+		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		if (bss_conf->assoc) {
+			priv->timestamp = bss_conf->last_tsf;
+			ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		} else {
+			/*
+			 * If we disassociate while there are pending
+			 * frames, just wake up the queues and let the
+			 * frames "escape" ... This shouldn't really
+			 * be happening to start with, but we should
+			 * not get stuck in this case either since it
+			 * can happen if userspace gets confused.
+			 */
+			iwlagn_lift_passive_no_rx(priv);
+
+			ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+			if (ctx->ctxid == IWL_RXON_CTX_BSS)
+				priv->have_rekey_data = false;
+		}
+
+		iwlagn_bt_coex_rssi_monitor(priv);
+	}
+
+	if (ctx->ht.enabled) {
+		ctx->ht.protection = bss_conf->ht_operation_mode &
+					IEEE80211_HT_OP_MODE_PROTECTION;
+		ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode &
+					IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+		iwlagn_check_needed_chains(priv, ctx, bss_conf);
+		iwl_set_rxon_ht(priv, &priv->current_ht_config);
+	}
+
+	iwlagn_set_rxon_chain(priv, ctx);
+
+	if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+		ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+
+	if (bss_conf->use_cts_prot)
+		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
+
+	memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
+
+	if (vif->type == NL80211_IFTYPE_AP ||
+	    vif->type == NL80211_IFTYPE_ADHOC) {
+		if (vif->bss_conf.enable_beacon) {
+			ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+			priv->beacon_ctx = ctx;
+		} else {
+			ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+			priv->beacon_ctx = NULL;
+		}
+	}
+
+	/*
+	 * If the ucode decides to do beacon filtering before
+	 * association, it will lose beacons that are needed
+	 * before sending frames out on passive channels. This
+	 * causes association failures on those channels. Enable
+	 * receiving beacons in such cases.
+	 */
+
+	if (vif->type == NL80211_IFTYPE_STATION) {
+		if (!bss_conf->assoc)
+			ctx->staging.filter_flags |= RXON_FILTER_BCON_AWARE_MSK;
+		else
+			ctx->staging.filter_flags &=
+						    ~RXON_FILTER_BCON_AWARE_MSK;
+	}
+
+	if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+		iwlagn_commit_rxon(priv, ctx);
+
+	if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) {
+		/*
+		 * The chain noise calibration will enable PM upon
+		 * completion. If calibration has already been run
+		 * then we need to enable power management here.
+		 */
+		if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
+			iwl_power_update_mode(priv, false);
+
+		/* Enable RX differential gain and sensitivity calibrations */
+		iwlagn_chain_noise_reset(priv);
+		priv->start_calib = 1;
+	}
+
+	if (changes & BSS_CHANGED_IBSS) {
+		ret = iwlagn_manage_ibss_station(priv, vif,
+						 bss_conf->ibss_joined);
+		if (ret)
+			IWL_ERR(priv, "failed to %s IBSS station %pM\n",
+				bss_conf->ibss_joined ? "add" : "remove",
+				bss_conf->bssid);
+	}
+
+	if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC &&
+	    priv->beacon_ctx) {
+		if (iwlagn_update_beacon(priv, vif))
+			IWL_ERR(priv, "Error sending IBSS beacon\n");
+	}
+
+	mutex_unlock(&priv->mutex);
+}
+
+void iwlagn_post_scan(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+
+	/*
+	 * We do not commit power settings while scan is pending,
+	 * do it now if the settings changed.
+	 */
+	iwl_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false);
+	iwl_set_tx_power(priv, priv->tx_power_next, false);
+
+	/*
+	 * Since setting the RXON may have been deferred while
+	 * performing the scan, fire one off if needed
+	 */
+	for_each_context(priv, ctx)
+		if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+			iwlagn_commit_rxon(priv, ctx);
+
+	iwlagn_set_pan_params(priv);
+}