Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...

1 files changed, 105 insertions, 53 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h
index 1360ebfdc51b..97d7eed32622 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h
@@ -74,6 +74,7 @@
  *	Otherwise, use rate_n_flags from the TX command
  * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
  *	Must set TX_CMD_FLG_ACK with this flag.
+ * @TX_CMD_FLG_TXOP_PROT: TXOP protection requested
  * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
  * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
  * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
@@ -177,29 +178,6 @@ enum iwl_tx_cmd_sec_ctrl {
 	TX_CMD_SEC_KEY_FROM_TABLE	= 0x10,
 };
 
-/* TODO: how does these values are OK with only 16 bit variable??? */
-/*
- * TX command next frame info
- *
- * bits 0:2 - security control (TX_CMD_SEC_*)
- * bit 3 - immediate ACK required
- * bit 4 - rate is taken from STA table
- * bit 5 - frame belongs to BA stream
- * bit 6 - immediate BA response expected
- * bit 7 - unused
- * bits 8:15 - Station ID
- * bits 16:31 - rate
- */
-#define TX_CMD_NEXT_FRAME_ACK_MSK		(0x8)
-#define TX_CMD_NEXT_FRAME_STA_RATE_MSK		(0x10)
-#define TX_CMD_NEXT_FRAME_BA_MSK		(0x20)
-#define TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK	(0x40)
-#define TX_CMD_NEXT_FRAME_FLAGS_MSK		(0xf8)
-#define TX_CMD_NEXT_FRAME_STA_ID_MSK		(0xff00)
-#define TX_CMD_NEXT_FRAME_STA_ID_POS		(8)
-#define TX_CMD_NEXT_FRAME_RATE_MSK		(0xffff0000)
-#define TX_CMD_NEXT_FRAME_RATE_POS		(16)
-
 /*
  * TX command Frame life time in us - to be written in pm_frame_timeout
  */
@@ -224,7 +202,7 @@ enum iwl_tx_cmd_sec_ctrl {
 
 /**
  * enum iwl_tx_offload_assist_flags_pos -  set %iwl_tx_cmd offload_assist values
- * @TX_CMD_OFFLD_IP_HDR_OFFSET: offset to start of IP header (in words)
+ * @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words)
  *	from mac header end. For normal case it is 4 words for SNAP.
  *	note: tx_cmd, mac header and pad are not counted in the offset.
  *	This is used to help the offload in case there is tunneling such as
@@ -258,22 +236,27 @@ enum iwl_tx_offload_assist_flags_pos {
  * @len: in bytes of the payload, see below for details
  * @offload_assist: TX offload configuration
  * @tx_flags: combination of TX_CMD_FLG_*
+ * @scratch: scratch buffer used by the device
  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
  *	cleared. Combination of RATE_MCS_*
  * @sta_id: index of destination station in FW station table
  * @sec_ctl: security control, TX_CMD_SEC_*
  * @initial_rate_index: index into the the rate table for initial TX attempt.
  *	Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
+ * @reserved2: reserved
  * @key: security key
- * @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
+ * @reserved3: reserved
  * @life_time: frame life time (usecs??)
  * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt +
  *	btkill_cnd + reserved), first 32 bits. "0" disables usage.
  * @dram_msb_ptr: upper bits of the scratch physical address
  * @rts_retry_limit: max attempts for RTS
  * @data_retry_limit: max attempts to send the data packet
- * @tid_spec: TID/tspec
+ * @tid_tspec: TID/tspec
  * @pm_frame_timeout: PM TX frame timeout
+ * @reserved4: reserved
+ * @payload: payload (same as @hdr)
+ * @hdr: 802.11 header (same as @payload)
  *
  * The byte count (both len and next_frame_len) includes MAC header
  * (24/26/30/32 bytes)
@@ -327,10 +310,11 @@ struct iwl_dram_sec_info {
  * ( TX_CMD = 0x1c )
  * @len: in bytes of the payload, see below for details
  * @offload_assist: TX offload configuration
- * @tx_flags: combination of &iwl_tx_cmd_flags
+ * @flags: combination of &enum iwl_tx_cmd_flags
  * @dram_info: FW internal DRAM storage
  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
  *	cleared. Combination of RATE_MCS_*
+ * @hdr: 802.11 header
  */
 struct iwl_tx_cmd_gen2 {
 	__le16 len;
@@ -504,7 +488,7 @@ enum iwl_tx_agg_status {
 
 /**
  * struct agg_tx_status - per packet TX aggregation status
- * @status: enum iwl_tx_agg_status
+ * @status: See &enum iwl_tx_agg_status
  * @sequence: Sequence # for this frame's Tx cmd (not SSN!)
  */
 struct agg_tx_status {
@@ -529,6 +513,63 @@ struct agg_tx_status {
 #define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)
 
 /**
+ * struct iwl_mvm_tx_resp_v3 - notifies that fw is TXing a packet
+ * ( REPLY_TX = 0x1c )
+ * @frame_count: 1 no aggregation, >1 aggregation
+ * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
+ * @failure_rts: num of failures due to unsuccessful RTS
+ * @failure_frame: num failures due to no ACK (unused for agg)
+ * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
+ *	Tx of all the batch. RATE_MCS_*
+ * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
+ *	for agg: RTS + CTS + aggregation tx time + block-ack time.
+ *	in usec.
+ * @pa_status: tx power info
+ * @pa_integ_res_a: tx power info
+ * @pa_integ_res_b: tx power info
+ * @pa_integ_res_c: tx power info
+ * @measurement_req_id: tx power info
+ * @reduced_tpc: transmit power reduction used
+ * @reserved: reserved
+ * @tfd_info: TFD information set by the FH
+ * @seq_ctl: sequence control from the Tx cmd
+ * @byte_cnt: byte count from the Tx cmd
+ * @tlc_info: TLC rate info
+ * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
+ * @frame_ctrl: frame control
+ * @status: for non-agg:  frame status TX_STATUS_*
+ *	for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields
+ *	follow this one, up to frame_count. Length in @frame_count.
+ *
+ * After the array of statuses comes the SSN of the SCD. Look at
+ * %iwl_mvm_get_scd_ssn for more details.
+ */
+struct iwl_mvm_tx_resp_v3 {
+	u8 frame_count;
+	u8 bt_kill_count;
+	u8 failure_rts;
+	u8 failure_frame;
+	__le32 initial_rate;
+	__le16 wireless_media_time;
+
+	u8 pa_status;
+	u8 pa_integ_res_a[3];
+	u8 pa_integ_res_b[3];
+	u8 pa_integ_res_c[3];
+	__le16 measurement_req_id;
+	u8 reduced_tpc;
+	u8 reserved;
+
+	__le32 tfd_info;
+	__le16 seq_ctl;
+	__le16 byte_cnt;
+	u8 tlc_info;
+	u8 ra_tid;
+	__le16 frame_ctrl;
+	struct agg_tx_status status[];
+} __packed; /* TX_RSP_API_S_VER_3 */
+
+/**
  * struct iwl_mvm_tx_resp - notifies that fw is TXing a packet
  * ( REPLY_TX = 0x1c )
  * @frame_count: 1 no aggregation, >1 aggregation
@@ -545,6 +586,8 @@ struct agg_tx_status {
  * @pa_integ_res_b: tx power info
  * @pa_integ_res_c: tx power info
  * @measurement_req_id: tx power info
+ * @reduced_tpc: transmit power reduction used
+ * @reserved: reserved
  * @tfd_info: TFD information set by the FH
  * @seq_ctl: sequence control from the Tx cmd
  * @byte_cnt: byte count from the Tx cmd
@@ -552,9 +595,8 @@ struct agg_tx_status {
  * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
  * @frame_ctrl: frame control
  * @tx_queue: TX queue for this response
+ * @reserved2: reserved for padding/alignment
  * @status: for non-agg:  frame status TX_STATUS_*
- *	for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields
- *	follow this one, up to frame_count.
  *	For version 6 TX response isn't received for aggregation at all.
  *
  * After the array of statuses comes the SSN of the SCD. Look at
@@ -582,26 +624,19 @@ struct iwl_mvm_tx_resp {
 	u8 tlc_info;
 	u8 ra_tid;
 	__le16 frame_ctrl;
-	union {
-		struct {
-			struct agg_tx_status status;
-		} v3;/* TX_RSP_API_S_VER_3 */
-		struct {
-			__le16 tx_queue;
-			__le16 reserved2;
-			struct agg_tx_status status;
-		} v6;
-	};
+	__le16 tx_queue;
+	__le16 reserved2;
+	struct agg_tx_status status;
 } __packed; /* TX_RSP_API_S_VER_6 */
 
 /**
  * struct iwl_mvm_ba_notif - notifies about reception of BA
  * ( BA_NOTIF = 0xc5 )
- * @sta_addr_lo32: lower 32 bits of the MAC address
- * @sta_addr_hi16: upper 16 bits of the MAC address
+ * @sta_addr: MAC address
+ * @reserved: reserved
  * @sta_id: Index of recipient (BA-sending) station in fw's station table
  * @tid: tid of the session
- * @seq_ctl:
+ * @seq_ctl: sequence control field
  * @bitmap: the bitmap of the BA notification as seen in the air
  * @scd_flow: the tx queue this BA relates to
  * @scd_ssn: the index of the last contiguously sent packet
@@ -610,10 +645,10 @@ struct iwl_mvm_tx_resp {
  * @reduced_txp: power reduced according to TPC. This is the actual value and
  *	not a copy from the LQ command. Thus, if not the first rate was used
  *	for Tx-ing then this value will be set to 0 by FW.
+ * @reserved1: reserved
  */
 struct iwl_mvm_ba_notif {
-	__le32 sta_addr_lo32;
-	__le16 sta_addr_hi16;
+	u8 sta_addr[ETH_ALEN];
 	__le16 reserved;
 
 	u8 sta_id;
@@ -633,13 +668,15 @@ struct iwl_mvm_ba_notif {
  * @q_num: TFD queue number
  * @tfd_index: Index of first un-acked frame in the  TFD queue
  * @scd_queue: For debug only - the physical queue the TFD queue is bound to
+ * @tid: TID of the queue (0-7)
+ * @reserved: reserved for alignment
  */
 struct iwl_mvm_compressed_ba_tfd {
 	__le16 q_num;
 	__le16 tfd_index;
 	u8 scd_queue;
-	u8 reserved;
-	__le16 reserved2;
+	u8 tid;
+	u8 reserved[2];
 } __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */
 
 /**
@@ -687,11 +724,12 @@ enum iwl_mvm_ba_resp_flags {
  * @query_frame_cnt: SCD query frame count
  * @txed: number of frames sent in the aggregation (all-TIDs)
  * @done: number of frames that were Acked by the BA (all-TIDs)
+ * @reserved: reserved (for alignment)
  * @wireless_time: Wireless-media time
  * @tx_rate: the rate the aggregation was sent at
  * @tfd_cnt: number of TFD-Q elements
  * @ra_tid_cnt: number of RATID-Q elements
- * @ba_tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
+ * @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
  *	for details.
  * @ra_tid: array of RA-TID queue status updates. For debug purposes only. See
  *	&iwl_mvm_compressed_ba_ratid for more details.
@@ -765,6 +803,7 @@ struct iwl_mac_beacon_cmd_v7 {
  * struct iwl_mac_beacon_cmd - beacon template command with offloaded CSA
  * @byte_cnt: byte count of the beacon frame
  * @flags: for future use
+ * @reserved: reserved
  * @data: see &iwl_mac_beacon_cmd_data
  */
 struct iwl_mac_beacon_cmd {
@@ -809,12 +848,24 @@ enum iwl_dump_control {
  * @flush_ctl: control flags
  * @reserved: reserved
  */
-struct iwl_tx_path_flush_cmd {
+struct iwl_tx_path_flush_cmd_v1 {
 	__le32 queues_ctl;
 	__le16 flush_ctl;
 	__le16 reserved;
 } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */
 
+/**
+ * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
+ * @sta_id: station ID to flush
+ * @tid_mask: TID mask to flush
+ * @reserved: reserved
+ */
+struct iwl_tx_path_flush_cmd {
+	__le32 sta_id;
+	__le16 tid_mask;
+	__le16 reserved;
+} __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_2 */
+
 /* Available options for the SCD_QUEUE_CFG HCMD */
 enum iwl_scd_cfg_actions {
 	SCD_CFG_DISABLE_QUEUE		= 0x0,
@@ -824,16 +875,17 @@ enum iwl_scd_cfg_actions {
 
 /**
  * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command
- * @token:
+ * @token: unused
  * @sta_id: station id
- * @tid:
+ * @tid: TID
  * @scd_queue: scheduler queue to confiug
  * @action: 1 queue enable, 0 queue disable, 2 change txq's tid owner
- *	Value is one of %iwl_scd_cfg_actions options
+ *	Value is one of &enum iwl_scd_cfg_actions options
  * @aggregate: 1 aggregated queue, 0 otherwise
- * @tx_fifo: %enum iwl_mvm_tx_fifo
+ * @tx_fifo: &enum iwl_mvm_tx_fifo
  * @window: BA window size
  * @ssn: SSN for the BA agreement
+ * @reserved: reserved
  */
 struct iwl_scd_txq_cfg_cmd {
 	u8 token;