diff options
| author | Haim Dreyfuss <haim.dreyfuss@intel.com> | 2021-01-17 17:52:26 +0300 |
|---|---|---|
| committer | Luca Coelho <luciano.coelho@intel.com> | 2021-02-05 12:55:15 +0300 |
| commit | 708a39aaca2204dcacc96dec1401373063801213 (patch) | |
| tree | 264a0f061245857c5b7ecd2ca050a98c90f23da4 /drivers/net/wireless/intel/iwlwifi/iwl-trans.h | |
| parent | 00520b7a2a13db5c6b56cc1f49cea4e0e174479c (diff) | |
| download | linux-708a39aaca2204dcacc96dec1401373063801213.tar.xz | |
iwlwifi: mvm: don't send commands during suspend\resume transition
D3_CONFIG_CMD and D0I3_END_CMD should be the last\first
command upon suspend\resume correspondingly, otherwise,
FW will raise an assert (0x342).
There are firmware notifications that cause the driver to
send a command back to the firmware. If such a notification
is sent to the driver while the the driver prepares the
firmware for D3, operation, what is likely to happen is that
the handling of the notification will try to get the mutex
and will wait unil the driver finished configuring the
firmware for D3. Then the handling notification will get
the mutex and handle the notification which will lead to
the aforementioned ASSERT 342.
To avoid this, we need to prevent any command to be sent to
the firmware between the D3_CONFIG_CMD and the D0I3_END_CMD.
Check this in the utility layer that sends the host commands
and in the transport layer as well.
Flag the D3_CONFIG_CMD and the D0I3_END_CMD commands as
commands that must be sent even if the firmware has already
been configured for D3 operation.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210117164916.1935a993b471.I3192c93c030576ca16773c01b009c4d93610d6ea@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-trans.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/iwl-trans.h | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h index ee97e2df3a1d..619cc9d69eac 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h @@ -107,12 +107,16 @@ static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt) * the response. The caller needs to call iwl_free_resp when done. * @CMD_WANT_ASYNC_CALLBACK: the op_mode's async callback function must be * called after this command completes. Valid only with CMD_ASYNC. + * @CMD_SEND_IN_D3: Allow the command to be sent in D3 mode, relevant to + * SUSPEND and RESUME commands. We are in D3 mode when we set + * trans->system_pm_mode to IWL_PLAT_PM_MODE_D3. */ enum CMD_MODE { CMD_ASYNC = BIT(0), CMD_WANT_SKB = BIT(1), CMD_SEND_IN_RFKILL = BIT(2), CMD_WANT_ASYNC_CALLBACK = BIT(3), + CMD_SEND_IN_D3 = BIT(4), }; #define DEF_CMD_PAYLOAD_SIZE 320 |