Merge tag 'wireless-drivers-next-2020-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.6

Second set of patches for v5.6. Nothing special standing out, smaller
new features and fixes allover.

Major changes:

ar5523

* add support for SMCWUSBT-G2 USB device

iwlwifi

* support new versions of the FTM FW APIs

* support new version of the beacon template FW API

* print some extra information when the driver is loaded

rtw88

* support wowlan feature for 8822c

* add support for WIPHY_WOWLAN_NET_DETECT

brcmfmac

* add initial support for monitor mode

qtnfmac

* add module parameter to enable DFS offloading in firmware

* add support for STA HE rates

* add support for TWT responder and spatial reuse
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 26 insertions, 1 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
index c2f7252ae4e7..cb9e8e189a1a 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
@@ -256,6 +256,7 @@
 /* RESET */
 #define CSR_RESET_REG_FLAG_NEVO_RESET                (0x00000001)
 #define CSR_RESET_REG_FLAG_FORCE_NMI                 (0x00000002)
+#define CSR_RESET_REG_FLAG_SW_RESET		     (0x00000080)
 #define CSR_RESET_REG_FLAG_MASTER_DISABLED           (0x00000100)
 #define CSR_RESET_REG_FLAG_STOP_MASTER               (0x00000200)
 #define CSR_RESET_LINK_PWR_MGMT_DISABLED             (0x80000000)
@@ -278,11 +279,35 @@
  *     4:  GOING_TO_SLEEP
  *         Indicates MAC is entering a power-saving sleep power-down.
  *         Not a good time to access device-internal resources.
+ *     3:  MAC_ACCESS_REQ
+ *         Host sets this to request and maintain MAC wakeup, to allow host
+ *         access to device-internal resources.  Host must wait for
+ *         MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
+ *         device registers.
+ *     2:  INIT_DONE
+ *         Host sets this to put device into fully operational D0 power mode.
+ *         Host resets this after SW_RESET to put device into low power mode.
+ *     0:  MAC_CLOCK_READY
+ *         Indicates MAC (ucode processor, etc.) is powered up and can run.
+ *         Internal resources are accessible.
+ *         NOTE:  This does not indicate that the processor is actually running.
+ *         NOTE:  This does not indicate that device has completed
+ *                init or post-power-down restore of internal SRAM memory.
+ *                Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
+ *                SRAM is restored and uCode is in normal operation mode.
+ *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
+ *                do not need to save/restore it.
+ *         NOTE:  After device reset, this bit remains "0" until host sets
+ *                INIT_DONE
  */
+#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY	     (0x00000001)
 #define CSR_GP_CNTRL_REG_FLAG_INIT_DONE		     (0x00000004)
-#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP         (0x00000010)
+#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ	     (0x00000008)
+#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP	     (0x00000010)
 #define CSR_GP_CNTRL_REG_FLAG_XTAL_ON		     (0x00000400)
 
+#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN	     (0x00000001)
+
 #define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE         (0x07000000)
 #define CSR_GP_CNTRL_REG_FLAG_RFKILL_WAKE_L1A_EN     (0x04000000)
 #define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW          (0x08000000)