Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits)
  iucv: Fix bad merging.
  net_sched: Add size table for qdiscs
  net_sched: Add accessor function for packet length for qdiscs
  net_sched: Add qdisc_enqueue wrapper
  highmem: Export totalhigh_pages.
  ipv6 mcast: Omit redundant address family checks in ip6_mc_source().
  net: Use standard structures for generic socket address structures.
  ipv6 netns: Make several "global" sysctl variables namespace aware.
  netns: Use net_eq() to compare net-namespaces for optimization.
  ipv6: remove unused macros from net/ipv6.h
  ipv6: remove unused parameter from ip6_ra_control
  tcp: fix kernel panic with listening_get_next
  tcp: Remove redundant checks when setting eff_sacks
  tcp: options clean up
  tcp: Fix MD5 signatures for non-linear skbs
  sctp: Update sctp global memory limit allocations.
  sctp: remove unnecessary byteshifting, calculate directly in big-endian
  sctp: Allow only 1 listening socket with SO_REUSEADDR
  sctp: Do not leak memory on multiple listen() calls
  sctp: Support ipv6only AF_INET6 sockets.
  ...

1 files changed, 44 insertions, 71 deletions

diff --git a/drivers/net/wireless/b43/lo.h b/drivers/net/wireless/b43/lo.h
index 455615d1f8c6..1da321cabc12 100644
--- a/drivers/net/wireless/b43/lo.h
+++ b/drivers/net/wireless/b43/lo.h
@@ -10,82 +10,63 @@ struct b43_loctl {
 	/* Control values. */
 	s8 i;
 	s8 q;
-	/* "Used by hardware" flag. */
-	bool used;
-#ifdef CONFIG_B43_DEBUG
-	/* Is this lo-control-array entry calibrated? */
-	bool calibrated;
-#endif
 };
-
 /* Debugging: Poison value for i and q values. */
 #define B43_LOCTL_POISON	111
 
-/* loctl->calibrated debugging mechanism */
-#ifdef CONFIG_B43_DEBUG
-static inline void b43_loctl_set_calibrated(struct b43_loctl *loctl,
-					    bool calibrated)
-{
-	loctl->calibrated = calibrated;
-}
-static inline bool b43_loctl_is_calibrated(struct b43_loctl *loctl)
-{
-	return loctl->calibrated;
-}
-#else
-static inline void b43_loctl_set_calibrated(struct b43_loctl *loctl,
-					    bool calibrated)
-{
-}
-static inline bool b43_loctl_is_calibrated(struct b43_loctl *loctl)
-{
-	return 1;
-}
-#endif
-
-/* TX Power LO Control Array.
- * Value-pairs to adjust the LocalOscillator are stored
- * in this structure.
- * There are two different set of values. One for "Flag is Set"
- * and one for "Flag is Unset".
- * By "Flag" the flag in struct b43_rfatt is meant.
- * The Value arrays are two-dimensional. The first index
- * is the baseband attenuation and the second index
- * is the radio attenuation.
- * Use b43_get_lo_g_ctl() to retrieve a value from the lists.
- */
+/* This struct holds calibrated LO settings for a set of
+ * Baseband and RF attenuation settings. */
+struct b43_lo_calib {
+	/* The set of attenuation values this set of LO
+	 * control values is calibrated for. */
+	struct b43_bbatt bbatt;
+	struct b43_rfatt rfatt;
+	/* The set of control values for the LO. */
+	struct b43_loctl ctl;
+	/* The time when these settings were calibrated (in jiffies) */
+	unsigned long calib_time;
+	/* List. */
+	struct list_head list;
+};
+
+/* Size of the DC Lookup Table in 16bit words. */
+#define B43_DC_LT_SIZE		32
+
+/* Local Oscillator calibration information */
 struct b43_txpower_lo_control {
-#define B43_NR_BB	12
-#define B43_NR_RF	16
-	/* LO Control values, with PAD Mixer */
-	struct b43_loctl with_padmix[B43_NR_BB][B43_NR_RF];
-	/* LO Control values, without PAD Mixer */
-	struct b43_loctl no_padmix[B43_NR_BB][B43_NR_RF];
-
-	/* Flag to indicate a complete rebuild of the two tables above
-	 * to the LO measuring code. */
-	bool rebuild;
-
-	/* Lists of valid RF and BB attenuation values for this device. */
+	/* Lists of RF and BB attenuation values for this device.
+	 * Used for building hardware power control tables. */
 	struct b43_rfatt_list rfatt_list;
 	struct b43_bbatt_list bbatt_list;
 
+	/* The DC Lookup Table is cached in memory here.
+	 * Note that this is only used for Hardware Power Control. */
+	u16 dc_lt[B43_DC_LT_SIZE];
+
+	/* List of calibrated control values (struct b43_lo_calib). */
+	struct list_head calib_list;
+	/* Last time the power vector was read (jiffies). */
+	unsigned long pwr_vec_read_time;
+	/* Last time the txctl values were measured (jiffies). */
+	unsigned long txctl_measured_time;
+
 	/* Current TX Bias value */
 	u8 tx_bias;
 	/* Current TX Magnification Value (if used by the device) */
 	u8 tx_magn;
 
-	/* GPHY LO is measured. */
-	bool lo_measured;
-
 	/* Saved device PowerVector */
 	u64 power_vector;
 };
 
-/* Measure the BPHY Local Oscillator. */
-void b43_lo_b_measure(struct b43_wldev *dev);
-/* Measure the BPHY/GPHY Local Oscillator. */
-void b43_lo_g_measure(struct b43_wldev *dev);
+/* Calibration expire timeouts.
+ * Timeouts must be multiple of 15 seconds. To make sure
+ * the item really expired when the 15 second timer hits, we
+ * subtract two additional seconds from the timeout. */
+#define B43_LO_CALIB_EXPIRE	(HZ * (30 - 2))
+#define B43_LO_PWRVEC_EXPIRE	(HZ * (30 - 2))
+#define B43_LO_TXCTL_EXPIRE	(HZ * (180 - 4))
+
 
 /* Adjust the Local Oscillator to the saved attenuation
  * and txctl values.
@@ -95,18 +76,10 @@ void b43_lo_g_adjust(struct b43_wldev *dev);
 void b43_lo_g_adjust_to(struct b43_wldev *dev,
 			u16 rfatt, u16 bbatt, u16 tx_control);
 
-/* Mark all possible b43_lo_g_ctl as "unused" */
-void b43_lo_g_ctl_mark_all_unused(struct b43_wldev *dev);
-/* Mark the b43_lo_g_ctl corresponding to the current
- * attenuation values as used.
- */
-void b43_lo_g_ctl_mark_cur_used(struct b43_wldev *dev);
+void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all);
 
-/* Get a reference to a LO Control value pair in the
- * TX Power LO Control Array.
- */
-struct b43_loctl *b43_get_lo_g_ctl(struct b43_wldev *dev,
-				   const struct b43_rfatt *rfatt,
-				   const struct b43_bbatt *bbatt);
+void b43_lo_g_maintanance_work(struct b43_wldev *dev);
+void b43_lo_g_cleanup(struct b43_wldev *dev);
+void b43_lo_g_init(struct b43_wldev *dev);
 
 #endif /* B43_LO_H_ */