b43: Implement dynamic PHY API

This patch implements a dynamic "ops" based PHY API.
This is needed in order to conveniently support future PHY types
to avoid the "switch"-hell.

This patch does not change any functionality. It just moves lots
of code from one place to another and adjusts it for the changed
data structures.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 10 insertions, 117 deletions

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index edcdfa366452..fc280157596c 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -12,7 +12,7 @@
 #include "leds.h"
 #include "rfkill.h"
 #include "lo.h"
-#include "phy.h"
+#include "phy_common.h"
 
 
 /* The unique identifier of the firmware that's officially supported by
@@ -508,122 +508,6 @@ struct b43_iv {
 } __attribute__((__packed__));
 
 
-struct b43_phy {
-	/* Band support flags. */
-	bool supports_2ghz;
-	bool supports_5ghz;
-
-	/* GMODE bit enabled? */
-	bool gmode;
-
-	/* Analog Type */
-	u8 analog;
-	/* B43_PHYTYPE_ */
-	u8 type;
-	/* PHY revision number. */
-	u8 rev;
-
-	/* Radio versioning */
-	u16 radio_manuf;	/* Radio manufacturer */
-	u16 radio_ver;		/* Radio version */
-	u8 radio_rev;		/* Radio revision */
-
-	bool dyn_tssi_tbl;	/* tssi2dbm is kmalloc()ed. */
-
-	/* ACI (adjacent channel interference) flags. */
-	bool aci_enable;
-	bool aci_wlan_automatic;
-	bool aci_hw_rssi;
-
-	/* Radio switched on/off */
-	bool radio_on;
-	struct {
-		/* Values saved when turning the radio off.
-		 * They are needed when turning it on again. */
-		bool valid;
-		u16 rfover;
-		u16 rfoverval;
-	} radio_off_context;
-
-	u16 minlowsig[2];
-	u16 minlowsigpos[2];
-
-	/* TSSI to dBm table in use */
-	const s8 *tssi2dbm;
-	/* Target idle TSSI */
-	int tgt_idle_tssi;
-	/* Current idle TSSI */
-	int cur_idle_tssi;
-
-	/* LocalOscillator control values. */
-	struct b43_txpower_lo_control *lo_control;
-	/* Values from b43_calc_loopback_gain() */
-	s16 max_lb_gain;	/* Maximum Loopback gain in hdB */
-	s16 trsw_rx_gain;	/* TRSW RX gain in hdB */
-	s16 lna_lod_gain;	/* LNA lod */
-	s16 lna_gain;		/* LNA */
-	s16 pga_gain;		/* PGA */
-
-	/* Desired TX power level (in dBm).
-	 * This is set by the user and adjusted in b43_phy_xmitpower(). */
-	u8 power_level;
-	/* A-PHY TX Power control value. */
-	u16 txpwr_offset;
-
-	/* Current TX power level attenuation control values */
-	struct b43_bbatt bbatt;
-	struct b43_rfatt rfatt;
-	u8 tx_control;		/* B43_TXCTL_XXX */
-
-	/* Hardware Power Control enabled? */
-	bool hardware_power_control;
-
-	/* Current Interference Mitigation mode */
-	int interfmode;
-	/* Stack of saved values from the Interference Mitigation code.
-	 * Each value in the stack is layed out as follows:
-	 * bit 0-11:  offset
-	 * bit 12-15: register ID
-	 * bit 16-32: value
-	 * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
-	 */
-#define B43_INTERFSTACK_SIZE	26
-	u32 interfstack[B43_INTERFSTACK_SIZE];	//FIXME: use a data structure
-
-	/* Saved values from the NRSSI Slope calculation */
-	s16 nrssi[2];
-	s32 nrssislope;
-	/* In memory nrssi lookup table. */
-	s8 nrssi_lt[64];
-
-	/* current channel */
-	u8 channel;
-
-	u16 lofcal;
-
-	u16 initval;		//FIXME rename?
-
-	/* PHY TX errors counter. */
-	atomic_t txerr_cnt;
-
-	/* The device does address auto increment for the OFDM tables.
-	 * We cache the previously used address here and omit the address
-	 * write on the next table access, if possible. */
-	u16 ofdmtab_addr; /* The address currently set in hardware. */
-	enum { /* The last data flow direction. */
-		B43_OFDMTAB_DIRECTION_UNKNOWN = 0,
-		B43_OFDMTAB_DIRECTION_READ,
-		B43_OFDMTAB_DIRECTION_WRITE,
-	} ofdmtab_addr_direction;
-
-#if B43_DEBUG
-	/* Manual TX-power control enabled? */
-	bool manual_txpower_control;
-	/* PHY registers locked by b43_phy_lock()? */
-	bool phy_locked;
-#endif /* B43_DEBUG */
-};
-
 /* Data structures for DMA transmission, per 80211 core. */
 struct b43_dma {
 	struct b43_dmaring *tx_ring_AC_BK; /* Background */
@@ -908,6 +792,15 @@ static inline int b43_is_mode(struct b43_wl *wl, int type)
 	return (wl->operating && wl->if_type == type);
 }
 
+/**
+ * b43_current_band - Returns the currently used band.
+ * Returns one of IEEE80211_BAND_2GHZ and IEEE80211_BAND_5GHZ.
+ */
+static inline enum ieee80211_band b43_current_band(struct b43_wl *wl)
+{
+	return wl->hw->conf.channel->band;
+}
+
 static inline u16 b43_read16(struct b43_wldev *dev, u16 offset)
 {
 	return ssb_read16(dev->dev, offset);