diff options
| author | Dedy Lansky <qca_dlansky@qca.qualcomm.com> | 2017-08-08 14:16:48 +0300 |
|---|---|---|
| committer | Kalle Valo <kvalo@qca.qualcomm.com> | 2017-08-08 21:44:20 +0300 |
| commit | eb4c02155881696ee6abb090d554b765e41d46ed (patch) | |
| tree | 479e25a916fe66ac8d26f2850c65236e77bbeccb /drivers/net/wireless/ath/wil6210 | |
| parent | 9b2a4c2d534ca45c74488bace32323b26633ff66 (diff) | |
| download | linux-eb4c02155881696ee6abb090d554b765e41d46ed.tar.xz | |
wil6210: store FW RF calibration result
Store initial FW RF calibration result in driver. Set this calibration
result back to FW after each FW reset in order to avoid future calibration
procedures.
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Diffstat (limited to 'drivers/net/wireless/ath/wil6210')
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/main.c | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/wil6210.h | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/wmi.c | 5 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/wmi.h | 2 |
4 files changed, 19 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index b1e281442ba3..b89d017ec847 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -1034,6 +1034,12 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0); wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0); + if (wil->fw_calib_result > 0) { + __le32 val = cpu_to_le32(wil->fw_calib_result | + (CALIB_RESULT_SIGNATURE << 8)); + wil_w(wil, RGF_USER_FW_CALIB_RESULT, (u32 __force)val); + } + wil_release_cpu(wil); } diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 45d9385e8a0f..78a9c9f8fc8f 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -171,6 +171,10 @@ struct RGF_ICR { #define RGF_USER_USER_SCRATCH_PAD (0x8802bc) #define RGF_USER_BL (0x880A3C) /* Boot Loader */ #define RGF_USER_FW_REV_ID (0x880a8c) /* chip revision */ +#define RGF_USER_FW_CALIB_RESULT (0x880a90) /* b0-7:result + * b8-15:signature + */ + #define CALIB_RESULT_SIGNATURE (0x11) #define RGF_USER_CLKS_CTL_0 (0x880abc) #define BIT_USER_CLKS_CAR_AHB_SW_SEL BIT(1) /* ref clk/PLL */ #define BIT_USER_CLKS_RST_PWGD BIT(11) /* reset on "power good" */ @@ -724,6 +728,8 @@ struct wil6210_priv { enum wmi_ps_profile_type ps_profile; + int fw_calib_result; + #ifdef CONFIG_PM #ifdef CONFIG_PM_SLEEP struct notifier_block pm_notify; diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index a9487f2b8d60..ffdd2fa401b1 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -344,6 +344,11 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len) strlcpy(wdev->wiphy->fw_version, wil->fw_version, sizeof(wdev->wiphy->fw_version)); + if (len > offsetof(struct wmi_ready_event, rfc_read_calib_result)) { + wil_dbg_wmi(wil, "rfc calibration result %d\n", + evt->rfc_read_calib_result); + wil->fw_calib_result = evt->rfc_read_calib_result; + } wil_set_recovery_state(wil, fw_recovery_idle); set_bit(wil_status_fwready, wil->status); /* let the reset sequence continue */ diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h index 4e31c2fd1fc6..1b426d7ef81f 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.h +++ b/drivers/net/wireless/ath/wil6210/wmi.h @@ -1300,6 +1300,8 @@ struct wmi_ready_event { /* enum wmi_phy_capability */ u8 phy_capability; u8 numof_additional_mids; + u8 rfc_read_calib_result; + u8 reserved[3]; } __packed; /* WMI_NOTIFY_REQ_DONE_EVENTID */ |