wireless: add new wil6210 802.11ad 60GHz driver

This adds support for the 60 GHz 802.11ad Wilocity card
through a new driver, wil6210. Wilocity implemented the
firmware, QCA maintains the device driver.

Currently supported:

- STA: with security
- AP: limited to 1 connected STA, security disabled
- Monitor: due to a hardware/firmware limitation
  either control or non-control frames are monitored

Using a STA and AP with this drive, one can assemble
a fully functional BSS. Throughput of 1.2Gbps is achieved
with iperf.

The wil6210 cards have on-board flash memory for the
firmware, the cards comes pre-flashed and no firmware
download is required.

For more details see:

http://wireless.kernel.org/en/users/Drivers/wil6210

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 223 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
new file mode 100644
index 000000000000..0fc83edd6bad
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/pci.h>
+#include <linux/moduleparam.h>
+
+#include "wil6210.h"
+
+static int use_msi = 1;
+module_param(use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi,
+		 " Use MSI interrupt: "
+		 "0 - don't, 1 - (default) - single, or 3");
+
+/* Bus ops */
+static int wil_if_pcie_enable(struct wil6210_priv *wil)
+{
+	struct pci_dev *pdev = wil->pdev;
+	int rc;
+
+	pci_set_master(pdev);
+
+	/*
+	 * how many MSI interrupts to request?
+	 */
+	switch (use_msi) {
+	case 3:
+	case 1:
+	case 0:
+		break;
+	default:
+		wil_err(wil, "Invalid use_msi=%d, default to 1\n",
+			use_msi);
+		use_msi = 1;
+	}
+	wil->n_msi = use_msi;
+	if (wil->n_msi) {
+		wil_dbg(wil, "Setup %d MSI interrupts\n", use_msi);
+		rc = pci_enable_msi_block(pdev, wil->n_msi);
+		if (rc && (wil->n_msi == 3)) {
+			wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
+			wil->n_msi = 1;
+			rc = pci_enable_msi_block(pdev, wil->n_msi);
+		}
+		if (rc) {
+			wil_err(wil, "pci_enable_msi failed, use INTx\n");
+			wil->n_msi = 0;
+		}
+	} else {
+		wil_dbg(wil, "MSI interrupts disabled, use INTx\n");
+	}
+
+	rc = wil6210_init_irq(wil, pdev->irq);
+	if (rc)
+		goto stop_master;
+
+	/* need reset here to obtain MAC */
+	rc = wil_reset(wil);
+	if (rc)
+		goto release_irq;
+
+	return 0;
+
+ release_irq:
+	wil6210_fini_irq(wil, pdev->irq);
+	/* safe to call if no MSI */
+	pci_disable_msi(pdev);
+ stop_master:
+	pci_clear_master(pdev);
+	return rc;
+}
+
+static int wil_if_pcie_disable(struct wil6210_priv *wil)
+{
+	struct pci_dev *pdev = wil->pdev;
+
+	pci_clear_master(pdev);
+	/* disable and release IRQ */
+	wil6210_fini_irq(wil, pdev->irq);
+	/* safe to call if no MSI */
+	pci_disable_msi(pdev);
+	/* TODO: disable HW */
+
+	return 0;
+}
+
+static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct wil6210_priv *wil;
+	struct device *dev = &pdev->dev;
+	void __iomem *csr;
+	int rc;
+
+	/* check HW */
+	dev_info(&pdev->dev, WIL_NAME " device found [%04x:%04x] (rev %x)\n",
+		 (int)pdev->vendor, (int)pdev->device, (int)pdev->revision);
+
+	if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
+		dev_err(&pdev->dev, "Not " WIL_NAME "? "
+			"BAR0 size is %lu while expecting %lu\n",
+			(ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
+		return -ENODEV;
+	}
+
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_err(&pdev->dev, "pci_enable_device failed\n");
+		return -ENODEV;
+	}
+	/* rollback to err_disable_pdev */
+
+	rc = pci_request_region(pdev, 0, WIL_NAME);
+	if (rc) {
+		dev_err(&pdev->dev, "pci_request_region failed\n");
+		goto err_disable_pdev;
+	}
+	/* rollback to err_release_reg */
+
+	csr = pci_ioremap_bar(pdev, 0);
+	if (!csr) {
+		dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
+		rc = -ENODEV;
+		goto err_release_reg;
+	}
+	/* rollback to err_iounmap */
+	dev_info(&pdev->dev, "CSR at %pR -> %p\n", &pdev->resource[0], csr);
+
+	wil = wil_if_alloc(dev, csr);
+	if (IS_ERR(wil)) {
+		rc = (int)PTR_ERR(wil);
+		dev_err(dev, "wil_if_alloc failed: %d\n", rc);
+		goto err_iounmap;
+	}
+	/* rollback to if_free */
+
+	pci_set_drvdata(pdev, wil);
+	wil->pdev = pdev;
+
+	/* FW should raise IRQ when ready */
+	rc = wil_if_pcie_enable(wil);
+	if (rc) {
+		wil_err(wil, "Enable device failed\n");
+		goto if_free;
+	}
+	/* rollback to bus_disable */
+
+	rc = wil_if_add(wil);
+	if (rc) {
+		wil_err(wil, "wil_if_add failed: %d\n", rc);
+		goto bus_disable;
+	}
+
+	wil6210_debugfs_init(wil);
+
+	/* check FW is alive */
+	wmi_echo(wil);
+
+	return 0;
+
+ bus_disable:
+	wil_if_pcie_disable(wil);
+ if_free:
+	wil_if_free(wil);
+ err_iounmap:
+	pci_iounmap(pdev, csr);
+ err_release_reg:
+	pci_release_region(pdev, 0);
+ err_disable_pdev:
+	pci_disable_device(pdev);
+
+	return rc;
+}
+
+static void wil_pcie_remove(struct pci_dev *pdev)
+{
+	struct wil6210_priv *wil = pci_get_drvdata(pdev);
+
+	wil6210_debugfs_remove(wil);
+	wil_if_pcie_disable(wil);
+	wil_if_remove(wil);
+	wil_if_free(wil);
+	pci_iounmap(pdev, wil->csr);
+	pci_release_region(pdev, 0);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(wil6210_pcie_ids) = {
+	{ PCI_DEVICE(0x1ae9, 0x0301) },
+	{ /* end: all zeroes */	},
+};
+MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
+
+static struct pci_driver wil6210_driver = {
+	.probe		= wil_pcie_probe,
+	.remove		= wil_pcie_remove,
+	.id_table	= wil6210_pcie_ids,
+	.name		= WIL_NAME,
+};
+
+module_pci_driver(wil6210_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
+MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");