Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Lots of fixes, mostly drivers as is usually the case.

   1) Don't treat zero DMA address as invalid in vmxnet3, from Alexey
      Khoroshilov.

   2) Fix element timeouts in netfilter's nft_dynset, from Anders K.
      Pedersen.

   3) Don't put aead_req crypto struct on the stack in mac80211, from
      Ard Biesheuvel.

   4) Several uninitialized variable warning fixes from Arnd Bergmann.

   5) Fix memory leak in cxgb4, from Colin Ian King.

   6) Fix bpf handling of VLAN header push/pop, from Daniel Borkmann.

   7) Several VRF semantic fixes from David Ahern.

   8) Set skb->protocol properly in ip6_tnl_xmit(), from Eli Cooper.

   9) Socket needs to be locked in udp_disconnect(), from Eric Dumazet.

  10) Div-by-zero on 32-bit fix in mlx4 driver, from Eugenia Emantayev.

  11) Fix stale link state during failover in NCSCI driver, from Gavin
      Shan.

  12) Fix netdev lower adjacency list traversal, from Ido Schimmel.

  13) Propvide proper handle when emitting notifications of filter
      deletes, from Jamal Hadi Salim.

  14) Memory leaks and big-endian issues in rtl8xxxu, from Jes Sorensen.

  15) Fix DESYNC_FACTOR handling in ipv6, from Jiri Bohac.

  16) Several routing offload fixes in mlxsw driver, from Jiri Pirko.

  17) Fix broadcast sync problem in TIPC, from Jon Paul Maloy.

  18) Validate chunk len before using it in SCTP, from Marcelo Ricardo
      Leitner.

  19) Revert a netns locking change that causes regressions, from Paul
      Moore.

  20) Add recursion limit to GRO handling, from Sabrina Dubroca.

  21) GFP_KERNEL in irq context fix in ibmvnic, from Thomas Falcon.

  22) Avoid accessing stale vxlan/geneve socket in data path, from
      Pravin Shelar"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (189 commits)
  geneve: avoid using stale geneve socket.
  vxlan: avoid using stale vxlan socket.
  qede: Fix out-of-bound fastpath memory access
  net: phy: dp83848: add dp83822 PHY support
  enic: fix rq disable
  tipc: fix broadcast link synchronization problem
  ibmvnic: Fix missing brackets in init_sub_crq_irqs
  ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context
  Revert "ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context"
  arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold
  net/mlx4_en: Save slave ethtool stats command
  net/mlx4_en: Fix potential deadlock in port statistics flow
  net/mlx4: Fix firmware command timeout during interrupt test
  net/mlx4_core: Do not access comm channel if it has not yet been initialized
  net/mlx4_en: Fix panic during reboot
  net/mlx4_en: Process all completions in RX rings after port goes up
  net/mlx4_en: Resolve dividing by zero in 32-bit system
  net/mlx4_core: Change the default value of enable_qos
  net/mlx4_core: Avoid setting ports to auto when only one port type is supported
  net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW spec
  ...

1 files changed, 3 insertions, 22 deletions

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index b6f064a8d264..7e27a06e5df1 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -33,7 +33,6 @@ struct coeff {
 
 enum ar9003_cal_types {
 	IQ_MISMATCH_CAL = BIT(0),
-	TEMP_COMP_CAL = BIT(1),
 };
 
 static void ar9003_hw_setup_calibration(struct ath_hw *ah,
@@ -59,12 +58,6 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah,
 		/* Kick-off cal */
 		REG_SET_BIT(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_DO_CAL);
 		break;
-	case TEMP_COMP_CAL:
-		ath_dbg(common, CALIBRATE,
-			"starting Temperature Compensation Calibration\n");
-		REG_SET_BIT(ah, AR_CH0_THERM, AR_CH0_THERM_LOCAL);
-		REG_SET_BIT(ah, AR_CH0_THERM, AR_CH0_THERM_START);
-		break;
 	default:
 		ath_err(common, "Invalid calibration type\n");
 		break;
@@ -93,8 +86,7 @@ static bool ar9003_hw_per_calibration(struct ath_hw *ah,
 		/*
 		* Accumulate cal measures for active chains
 		*/
-		if (cur_caldata->calCollect)
-			cur_caldata->calCollect(ah);
+		cur_caldata->calCollect(ah);
 		ah->cal_samples++;
 
 		if (ah->cal_samples >= cur_caldata->calNumSamples) {
@@ -107,8 +99,7 @@ static bool ar9003_hw_per_calibration(struct ath_hw *ah,
 			/*
 			* Process accumulated data
 			*/
-			if (cur_caldata->calPostProc)
-				cur_caldata->calPostProc(ah, numChains);
+			cur_caldata->calPostProc(ah, numChains);
 
 			/* Calibration has finished. */
 			caldata->CalValid |= cur_caldata->calType;
@@ -323,16 +314,9 @@ static const struct ath9k_percal_data iq_cal_single_sample = {
 	ar9003_hw_iqcalibrate
 };
 
-static const struct ath9k_percal_data temp_cal_single_sample = {
-	TEMP_COMP_CAL,
-	MIN_CAL_SAMPLES,
-	PER_MAX_LOG_COUNT,
-};
-
 static void ar9003_hw_init_cal_settings(struct ath_hw *ah)
 {
 	ah->iq_caldata.calData = &iq_cal_single_sample;
-	ah->temp_caldata.calData = &temp_cal_single_sample;
 
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
 		ah->enabled_cals |= TX_IQ_CAL;
@@ -340,7 +324,7 @@ static void ar9003_hw_init_cal_settings(struct ath_hw *ah)
 			ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
 	}
 
-	ah->supp_cals = IQ_MISMATCH_CAL | TEMP_COMP_CAL;
+	ah->supp_cals = IQ_MISMATCH_CAL;
 }
 
 #define OFF_UPPER_LT 24
@@ -1399,9 +1383,6 @@ static void ar9003_hw_init_cal_common(struct ath_hw *ah)
 	INIT_CAL(&ah->iq_caldata);
 	INSERT_CAL(ah, &ah->iq_caldata);
 
-	INIT_CAL(&ah->temp_caldata);
-	INSERT_CAL(ah, &ah->temp_caldata);
-
 	/* Initialize current pointer to first element in list */
 	ah->cal_list_curr = ah->cal_list;