ath10k: enable multi-channel on supported devices

This effectively enables multi-channel operation
on qca6174 WLAN.RM.2.0-00073 (and possibly any
newer firmware release for qca6174).

This adds appopriate interface combinations and
initializes firmware channel scheduler.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 80 insertions, 1 deletions

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2da66ca635fd..e455dabedd1a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3735,6 +3735,15 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		goto err_core_stop;
 	}
 
+	if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
+		ret = ath10k_wmi_adaptive_qcs(ar, true);
+		if (ret) {
+			ath10k_warn(ar, "failed to enable adaptive qcs: %d\n",
+				    ret);
+			goto err_core_stop;
+		}
+	}
+
 	if (ar->cfg_tx_chainmask)
 		__ath10k_set_antenna(ar, ar->cfg_tx_chainmask,
 				     ar->cfg_rx_chainmask);
@@ -6487,6 +6496,64 @@ static const struct ieee80211_iface_combination ath10k_10x_if_comb[] = {
 	},
 };
 
+static const struct ieee80211_iface_limit ath10k_tlv_if_limit[] = {
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_STATION) |
+			 BIT(NL80211_IFTYPE_AP) |
+			 BIT(NL80211_IFTYPE_P2P_CLIENT) |
+			 BIT(NL80211_IFTYPE_P2P_GO),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_P2P_DEVICE),
+	},
+};
+
+static const struct ieee80211_iface_limit ath10k_tlv_if_limit_ibss[] = {
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_ADHOC),
+	},
+};
+
+/* FIXME: This is not thouroughly tested. These combinations may over- or
+ * underestimate hw/fw capabilities.
+ */
+static struct ieee80211_iface_combination ath10k_tlv_if_comb[] = {
+	{
+		.limits = ath10k_tlv_if_limit,
+		.num_different_channels = 1,
+		.max_interfaces = 3,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
+	},
+	{
+		.limits = ath10k_tlv_if_limit_ibss,
+		.num_different_channels = 1,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
+	},
+};
+
+static struct ieee80211_iface_combination ath10k_tlv_qcs_if_comb[] = {
+	{
+		.limits = ath10k_tlv_if_limit,
+		.num_different_channels = 2,
+		.max_interfaces = 3,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
+	},
+	{
+		.limits = ath10k_tlv_if_limit_ibss,
+		.num_different_channels = 1,
+		.max_interfaces = 2,
+		.n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
+	},
+};
+
 static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
 {
 	struct ieee80211_sta_vht_cap vht_cap = {0};
@@ -6781,12 +6848,24 @@ int ath10k_mac_register(struct ath10k *ar)
 
 	switch (ar->wmi.op_version) {
 	case ATH10K_FW_WMI_OP_VERSION_MAIN:
-	case ATH10K_FW_WMI_OP_VERSION_TLV:
 		ar->hw->wiphy->iface_combinations = ath10k_if_comb;
 		ar->hw->wiphy->n_iface_combinations =
 			ARRAY_SIZE(ath10k_if_comb);
 		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
 		break;
+	case ATH10K_FW_WMI_OP_VERSION_TLV:
+		if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
+			ar->hw->wiphy->iface_combinations =
+				ath10k_tlv_qcs_if_comb;
+			ar->hw->wiphy->n_iface_combinations =
+				ARRAY_SIZE(ath10k_tlv_qcs_if_comb);
+		} else {
+			ar->hw->wiphy->iface_combinations = ath10k_tlv_if_comb;
+			ar->hw->wiphy->n_iface_combinations =
+				ARRAY_SIZE(ath10k_tlv_if_comb);
+		}
+		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+		break;
 	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_10_2:
 	case ATH10K_FW_WMI_OP_VERSION_10_2_4: