ath10k: add wmi_10x_<cmd/event> definitions

Introduce the cmd and events definitions for 10.X FW API
and make up the wmi_10x_cmd_map. This is the core of
host-firmware WMI interface for 10.X FW branch.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 214 insertions, 1 deletions

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index b8b446a9430f..d8414abb3483 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -359,7 +359,9 @@ enum wmi_cmd_group {
 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
 
-/* Command IDs and commande events. */
+#define WMI_CMD_UNDEFINED 0
+
+/* Command IDs and command events for MAIN FW. */
 enum wmi_cmd_id {
 	WMI_INIT_CMDID = 0x1,
 
@@ -600,6 +602,217 @@ enum wmi_event_id {
 	WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
 };
 
+/* Command IDs and command events for 10.X firmware */
+enum wmi_10x_cmd_id {
+	WMI_10X_START_CMDID = 0x9000,
+	WMI_10X_END_CMDID = 0x9FFF,
+
+	/* initialize the wlan sub system */
+	WMI_10X_INIT_CMDID,
+
+	/* Scan specific commands */
+
+	WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
+	WMI_10X_STOP_SCAN_CMDID,
+	WMI_10X_SCAN_CHAN_LIST_CMDID,
+	WMI_10X_ECHO_CMDID,
+
+	/* PDEV(physical device) specific commands */
+	WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
+	WMI_10X_PDEV_SET_CHANNEL_CMDID,
+	WMI_10X_PDEV_SET_PARAM_CMDID,
+	WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
+	WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
+	WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
+	WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
+	WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
+	WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
+	WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
+	WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
+	WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+	WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
+
+	/* VDEV(virtual device) specific commands */
+	WMI_10X_VDEV_CREATE_CMDID,
+	WMI_10X_VDEV_DELETE_CMDID,
+	WMI_10X_VDEV_START_REQUEST_CMDID,
+	WMI_10X_VDEV_RESTART_REQUEST_CMDID,
+	WMI_10X_VDEV_UP_CMDID,
+	WMI_10X_VDEV_STOP_CMDID,
+	WMI_10X_VDEV_DOWN_CMDID,
+	WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
+	WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
+	WMI_10X_VDEV_SET_PARAM_CMDID,
+	WMI_10X_VDEV_INSTALL_KEY_CMDID,
+
+	/* peer specific commands */
+	WMI_10X_PEER_CREATE_CMDID,
+	WMI_10X_PEER_DELETE_CMDID,
+	WMI_10X_PEER_FLUSH_TIDS_CMDID,
+	WMI_10X_PEER_SET_PARAM_CMDID,
+	WMI_10X_PEER_ASSOC_CMDID,
+	WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
+	WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
+	WMI_10X_PEER_MCAST_GROUP_CMDID,
+
+	/* beacon/management specific commands */
+
+	WMI_10X_BCN_TX_CMDID,
+	WMI_10X_BCN_PRB_TMPL_CMDID,
+	WMI_10X_BCN_FILTER_RX_CMDID,
+	WMI_10X_PRB_REQ_FILTER_RX_CMDID,
+	WMI_10X_MGMT_TX_CMDID,
+
+	/* commands to directly control ba negotiation directly from host. */
+	WMI_10X_ADDBA_CLEAR_RESP_CMDID,
+	WMI_10X_ADDBA_SEND_CMDID,
+	WMI_10X_ADDBA_STATUS_CMDID,
+	WMI_10X_DELBA_SEND_CMDID,
+	WMI_10X_ADDBA_SET_RESP_CMDID,
+	WMI_10X_SEND_SINGLEAMSDU_CMDID,
+
+	/* Station power save specific config */
+	WMI_10X_STA_POWERSAVE_MODE_CMDID,
+	WMI_10X_STA_POWERSAVE_PARAM_CMDID,
+	WMI_10X_STA_MIMO_PS_MODE_CMDID,
+
+	/* set debug log config */
+	WMI_10X_DBGLOG_CFG_CMDID,
+
+	/* DFS-specific commands */
+	WMI_10X_PDEV_DFS_ENABLE_CMDID,
+	WMI_10X_PDEV_DFS_DISABLE_CMDID,
+
+	/* QVIT specific command id */
+	WMI_10X_PDEV_QVIT_CMDID,
+
+	/* Offload Scan and Roaming related  commands */
+	WMI_10X_ROAM_SCAN_MODE,
+	WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
+	WMI_10X_ROAM_SCAN_PERIOD,
+	WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+	WMI_10X_ROAM_AP_PROFILE,
+	WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
+	WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
+	WMI_10X_OFL_SCAN_PERIOD,
+
+	/* P2P specific commands */
+	WMI_10X_P2P_DEV_SET_DEVICE_INFO,
+	WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
+	WMI_10X_P2P_GO_SET_BEACON_IE,
+	WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
+
+	/* AP power save specific config */
+	WMI_10X_AP_PS_PEER_PARAM_CMDID,
+	WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
+
+	/* Rate-control specific commands */
+	WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
+
+	/* WLAN Profiling commands. */
+	WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
+	WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+	WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+	WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+	WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+
+	/* Suspend resume command Ids */
+	WMI_10X_PDEV_SUSPEND_CMDID,
+	WMI_10X_PDEV_RESUME_CMDID,
+
+	/* Beacon filter commands */
+	WMI_10X_ADD_BCN_FILTER_CMDID,
+	WMI_10X_RMV_BCN_FILTER_CMDID,
+
+	/* WOW Specific WMI commands*/
+	WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
+	WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
+	WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+	WMI_10X_WOW_ENABLE_CMDID,
+	WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+
+	/* RTT measurement related cmd */
+	WMI_10X_RTT_MEASREQ_CMDID,
+	WMI_10X_RTT_TSF_CMDID,
+
+	/* transmit beacon by value */
+	WMI_10X_PDEV_SEND_BCN_CMDID,
+
+	/* F/W stats */
+	WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
+	WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+	WMI_10X_REQUEST_STATS_CMDID,
+
+	/* GPIO Configuration */
+	WMI_10X_GPIO_CONFIG_CMDID,
+	WMI_10X_GPIO_OUTPUT_CMDID,
+
+	WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
+};
+
+enum wmi_10x_event_id {
+	WMI_10X_SERVICE_READY_EVENTID = 0x8000,
+	WMI_10X_READY_EVENTID,
+	WMI_10X_START_EVENTID = 0x9000,
+	WMI_10X_END_EVENTID = 0x9FFF,
+
+	/* Scan specific events */
+	WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
+	WMI_10X_ECHO_EVENTID,
+	WMI_10X_DEBUG_MESG_EVENTID,
+	WMI_10X_UPDATE_STATS_EVENTID,
+
+	/* Instantaneous RSSI event */
+	WMI_10X_INST_RSSI_STATS_EVENTID,
+
+	/* VDEV specific events */
+	WMI_10X_VDEV_START_RESP_EVENTID,
+	WMI_10X_VDEV_STANDBY_REQ_EVENTID,
+	WMI_10X_VDEV_RESUME_REQ_EVENTID,
+	WMI_10X_VDEV_STOPPED_EVENTID,
+
+	/* peer  specific events */
+	WMI_10X_PEER_STA_KICKOUT_EVENTID,
+
+	/* beacon/mgmt specific events */
+	WMI_10X_HOST_SWBA_EVENTID,
+	WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
+	WMI_10X_MGMT_RX_EVENTID,
+
+	/* Channel stats event */
+	WMI_10X_CHAN_INFO_EVENTID,
+
+	/* PHY Error specific WMI event */
+	WMI_10X_PHYERR_EVENTID,
+
+	/* Roam event to trigger roaming on host */
+	WMI_10X_ROAM_EVENTID,
+
+	/* matching AP found from list of profiles */
+	WMI_10X_PROFILE_MATCH,
+
+	/* debug print message used for tracing FW code while debugging */
+	WMI_10X_DEBUG_PRINT_EVENTID,
+	/* VI spoecific event */
+	WMI_10X_PDEV_QVIT_EVENTID,
+	/* FW code profile data in response to profile request */
+	WMI_10X_WLAN_PROFILE_DATA_EVENTID,
+
+	/*RTT related event ID*/
+	WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
+	WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
+	WMI_10X_RTT_ERROR_REPORT_EVENTID,
+
+	WMI_10X_WOW_WAKEUP_HOST_EVENTID,
+	WMI_10X_DCS_INTERFERENCE_EVENTID,
+
+	/* TPC config for the current operating channel */
+	WMI_10X_PDEV_TPC_CONFIG_EVENTID,
+
+	WMI_10X_GPIO_INPUT_EVENTID,
+	WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID-1,
+};
+
 enum wmi_phy_mode {
 	MODE_11A        = 0,   /* 11a Mode */
 	MODE_11G        = 1,   /* 11b/g Mode */