ath10k: add VHT160 support

This patch adds full VHT160 support for QCA9984 chipsets Tested on Netgear
R7800. 80+80 is possible, but disabled so far since it seems to contain
glitches like missing vht station flags (this may be firmware or mac80211
related).

Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
[kvalo@qca.qualcomm.com: refactoring and fix few warnings]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 33 insertions, 2 deletions

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2f6f777ae049..28bf19914fff 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -569,10 +569,14 @@ chan_to_phymode(const struct cfg80211_chan_def *chandef)
 		case NL80211_CHAN_WIDTH_80:
 			phymode = MODE_11AC_VHT80;
 			break;
+		case NL80211_CHAN_WIDTH_160:
+			phymode = MODE_11AC_VHT160;
+			break;
+		case NL80211_CHAN_WIDTH_80P80:
+			phymode = MODE_11AC_VHT80_80;
+			break;
 		case NL80211_CHAN_WIDTH_5:
 		case NL80211_CHAN_WIDTH_10:
-		case NL80211_CHAN_WIDTH_80P80:
-		case NL80211_CHAN_WIDTH_160:
 			phymode = MODE_UNKNOWN;
 			break;
 		}
@@ -971,6 +975,7 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
 	arg.vdev_id = vdev_id;
 	arg.channel.freq = channel->center_freq;
 	arg.channel.band_center_freq1 = chandef->center_freq1;
+	arg.channel.band_center_freq2 = chandef->center_freq2;
 
 	/* TODO setup this dynamically, what in case we
 	   don't have any vifs? */
@@ -1417,6 +1422,7 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif,
 
 	arg.channel.freq = chandef->chan->center_freq;
 	arg.channel.band_center_freq1 = chandef->center_freq1;
+	arg.channel.band_center_freq2 = chandef->center_freq2;
 	arg.channel.mode = chan_to_phymode(chandef);
 
 	arg.channel.min_power = 0;
@@ -2480,6 +2486,9 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 	if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
 		arg->peer_flags |= ar->wmi.peer_flags->bw80;
 
+	if (sta->bandwidth == IEEE80211_STA_RX_BW_160)
+		arg->peer_flags |= ar->wmi.peer_flags->bw160;
+
 	arg->peer_vht_rates.rx_max_rate =
 		__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
 	arg->peer_vht_rates.rx_mcs_set =
@@ -2536,6 +2545,18 @@ static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_sta *sta)
 static enum wmi_phy_mode ath10k_mac_get_phymode_vht(struct ath10k *ar,
 						    struct ieee80211_sta *sta)
 {
+	if (sta->bandwidth == IEEE80211_STA_RX_BW_160) {
+		switch (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
+		case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
+			return MODE_11AC_VHT160;
+		case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
+			return MODE_11AC_VHT80_80;
+		default:
+			/* not sure if this is a valid case? */
+			return MODE_11AC_VHT160;
+		}
+	}
+
 	if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
 		return MODE_11AC_VHT80;
 
@@ -4321,6 +4342,13 @@ static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
 		vht_cap.cap |= val;
 	}
 
+	/* Currently the firmware seems to be buggy, don't enable 80+80
+	 * mode until that's resolved.
+	 */
+	if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) &&
+	    !(ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ))
+		vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
+
 	mcs_map = 0;
 	for (i = 0; i < 8; i++) {
 		if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
@@ -6979,6 +7007,9 @@ static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
 			bw = WMI_PEER_CHWIDTH_80MHZ;
 			break;
 		case IEEE80211_STA_RX_BW_160:
+			bw = WMI_PEER_CHWIDTH_160MHZ;
+			break;
+		default:
 			ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n",
 				    sta->bandwidth, sta->addr);
 			bw = WMI_PEER_CHWIDTH_20MHZ;