tulip: Use DEFINE_PCI_DEVICE_TABLE and static const

Moves the PCI table to the right read-only section.
Using static const generally increases object text and decreases data size.
It also generally decreases overall object size.

Signed-off-by: Joe Perches <joe@perches.com>

1 files changed, 9 insertions, 6 deletions

diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 2c39f2591216..5c01e260f1ba 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1302,17 +1302,18 @@ static const struct net_device_ops tulip_netdev_ops = {
 #endif
 };
 
+DEFINE_PCI_DEVICE_TABLE(early_486_chipsets) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
+	{ },
+};
+
 static int __devinit tulip_init_one (struct pci_dev *pdev,
 				     const struct pci_device_id *ent)
 {
 	struct tulip_private *tp;
 	/* See note below on the multiport cards. */
 	static unsigned char last_phys_addr[6] = {0x00, 'L', 'i', 'n', 'u', 'x'};
-	static struct pci_device_id early_486_chipsets[] = {
-		{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
-		{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
-		{ },
-	};
 	static int last_irq;
 	static int multiport_cnt;	/* For four-port boards w/one EEPROM */
 	int i, irq;
@@ -1682,7 +1683,9 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 		tp->full_duplex_lock = 1;
 
 	if (tulip_media_cap[tp->default_port] & MediaIsMII) {
-		u16 media2advert[] = { 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 };
+		static const u16 media2advert[] = {
+			0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200
+		};
 		tp->mii_advertise = media2advert[tp->default_port - 9];
 		tp->mii_advertise |= (tp->flags & HAS_8023X); /* Matching bits! */
 	}