Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 175 insertions, 0 deletions

diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
new file mode 100644
index 000000000000..691568283553
--- /dev/null
+++ b/drivers/net/tulip/timer.c
@@ -0,0 +1,175 @@
+/*
+	drivers/net/tulip/timer.c
+
+	Maintained by Jeff Garzik <jgarzik@pobox.com>
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
+	for more information on this driver, or visit the project
+	Web page at http://sourceforge.net/projects/tulip/
+
+*/
+
+#include <linux/pci.h>
+#include "tulip.h"
+
+
+void tulip_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	u32 csr12 = ioread32(ioaddr + CSR12);
+	int next_tick = 2*HZ;
+
+	if (tulip_debug > 2) {
+		printk(KERN_DEBUG "%s: Media selection tick, %s, status %8.8x mode"
+			   " %8.8x SIA %8.8x %8.8x %8.8x %8.8x.\n",
+			   dev->name, medianame[dev->if_port], ioread32(ioaddr + CSR5),
+			   ioread32(ioaddr + CSR6), csr12, ioread32(ioaddr + CSR13),
+			   ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+	}
+	switch (tp->chip_id) {
+	case DC21140:
+	case DC21142:
+	case MX98713:
+	case COMPEX9881:
+	case DM910X:
+	case ULI526X:
+	default: {
+		struct medialeaf *mleaf;
+		unsigned char *p;
+		if (tp->mtable == NULL) {	/* No EEPROM info, use generic code. */
+			/* Not much that can be done.
+			   Assume this a generic MII or SYM transceiver. */
+			next_tick = 60*HZ;
+			if (tulip_debug > 2)
+				printk(KERN_DEBUG "%s: network media monitor CSR6 %8.8x "
+					   "CSR12 0x%2.2x.\n",
+					   dev->name, ioread32(ioaddr + CSR6), csr12 & 0xff);
+			break;
+		}
+		mleaf = &tp->mtable->mleaf[tp->cur_index];
+		p = mleaf->leafdata;
+		switch (mleaf->type) {
+		case 0: case 4: {
+			/* Type 0 serial or 4 SYM transceiver.  Check the link beat bit. */
+			int offset = mleaf->type == 4 ? 5 : 2;
+			s8 bitnum = p[offset];
+			if (p[offset+1] & 0x80) {
+				if (tulip_debug > 1)
+					printk(KERN_DEBUG"%s: Transceiver monitor tick "
+						   "CSR12=%#2.2x, no media sense.\n",
+						   dev->name, csr12);
+				if (mleaf->type == 4) {
+					if (mleaf->media == 3 && (csr12 & 0x02))
+						goto select_next_media;
+				}
+				break;
+			}
+			if (tulip_debug > 2)
+				printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#2.2x"
+					   " bit %d is %d, expecting %d.\n",
+					   dev->name, csr12, (bitnum >> 1) & 7,
+					   (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
+					   (bitnum >= 0));
+			/* Check that the specified bit has the proper value. */
+			if ((bitnum < 0) !=
+				((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) {
+				if (tulip_debug > 2)
+					printk(KERN_DEBUG "%s: Link beat detected for %s.\n", dev->name,
+					       medianame[mleaf->media & MEDIA_MASK]);
+				if ((p[2] & 0x61) == 0x01)	/* Bogus Znyx board. */
+					goto actually_mii;
+				netif_carrier_on(dev);
+				break;
+			}
+			netif_carrier_off(dev);
+			if (tp->medialock)
+				break;
+	  select_next_media:
+			if (--tp->cur_index < 0) {
+				/* We start again, but should instead look for default. */
+				tp->cur_index = tp->mtable->leafcount - 1;
+			}
+			dev->if_port = tp->mtable->mleaf[tp->cur_index].media;
+			if (tulip_media_cap[dev->if_port] & MediaIsFD)
+				goto select_next_media; /* Skip FD entries. */
+			if (tulip_debug > 1)
+				printk(KERN_DEBUG "%s: No link beat on media %s,"
+				       " trying transceiver type %s.\n",
+				       dev->name, medianame[mleaf->media & MEDIA_MASK],
+				       medianame[tp->mtable->mleaf[tp->cur_index].media]);
+			tulip_select_media(dev, 0);
+			/* Restart the transmit process. */
+			tulip_restart_rxtx(tp);
+			next_tick = (24*HZ)/10;
+			break;
+		}
+		case 1:  case 3:		/* 21140, 21142 MII */
+		actually_mii:
+			if (tulip_check_duplex(dev) < 0) {
+				netif_carrier_off(dev);
+				next_tick = 3*HZ;
+			} else {
+				netif_carrier_on(dev);
+				next_tick = 60*HZ;
+			}
+			break;
+		case 2:					/* 21142 serial block has no link beat. */
+		default:
+			break;
+		}
+	}
+	break;
+	}
+	/* mod_timer synchronizes us with potential add_timer calls
+	 * from interrupts.
+	 */
+	mod_timer(&tp->timer, RUN_AT(next_tick));
+}
+
+
+void mxic_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int next_tick = 60*HZ;
+
+	if (tulip_debug > 3) {
+		printk(KERN_INFO"%s: MXIC negotiation status %8.8x.\n", dev->name,
+			   ioread32(ioaddr + CSR12));
+	}
+	if (next_tick) {
+		mod_timer(&tp->timer, RUN_AT(next_tick));
+	}
+}
+
+
+void comet_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct tulip_private *tp = netdev_priv(dev);
+	int next_tick = 60*HZ;
+
+	if (tulip_debug > 1)
+		printk(KERN_DEBUG "%s: Comet link status %4.4x partner capability "
+			   "%4.4x.\n",
+			   dev->name,
+			   tulip_mdio_read(dev, tp->phys[0], 1),
+			   tulip_mdio_read(dev, tp->phys[0], 5));
+	/* mod_timer synchronizes us with potential add_timer calls
+	 * from interrupts.
+	 */
+	if (tulip_check_duplex(dev) < 0)
+		{ netif_carrier_off(dev); }
+	else
+		{ netif_carrier_on(dev); }
+	mod_timer(&tp->timer, RUN_AT(next_tick));
+}
+