diff options
author | Giuseppe CAVALLARO <peppe.cavallaro@st.com> | 2010-11-24 05:37:58 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-11-24 22:14:24 +0300 |
commit | 9dfeb4d953f914bd3bb56ce60e22ee84687399ce (patch) | |
tree | 37d9d33974944cb219e911e0aa965d337fee2ed7 /drivers/net/stmmac | |
parent | b340007f79941297c44a7dfba4d3c587ff81590f (diff) | |
download | linux-9dfeb4d953f914bd3bb56ce60e22ee84687399ce.tar.xz |
stmmac: tidy-up stmmac_priv structure
This patch tidies-up the stmmac_priv structure
that had many fileds alredy defined in the
plat_stmmacenet_data structure.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/stmmac')
-rw-r--r-- | drivers/net/stmmac/stmmac.h | 15 | ||||
-rw-r--r-- | drivers/net/stmmac/stmmac_ethtool.c | 4 | ||||
-rw-r--r-- | drivers/net/stmmac/stmmac_main.c | 69 | ||||
-rw-r--r-- | drivers/net/stmmac/stmmac_mdio.c | 8 |
4 files changed, 44 insertions, 52 deletions
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h index 79bdc2e13224..31575670d862 100644 --- a/drivers/net/stmmac/stmmac.h +++ b/drivers/net/stmmac/stmmac.h @@ -37,7 +37,6 @@ struct stmmac_priv { unsigned int cur_tx; unsigned int dirty_tx; unsigned int dma_tx_size; - int tx_coe; int tx_coalesce; struct dma_desc *dma_rx ; @@ -48,7 +47,6 @@ struct stmmac_priv { struct sk_buff_head rx_recycle; struct net_device *dev; - int is_gmac; dma_addr_t dma_rx_phy; unsigned int dma_rx_size; unsigned int dma_buf_sz; @@ -60,14 +58,11 @@ struct stmmac_priv { struct napi_struct napi; phy_interface_t phy_interface; - int pbl; - int bus_id; int phy_addr; int phy_mask; int (*phy_reset) (void *priv); - void (*fix_mac_speed) (void *priv, unsigned int speed); - void (*bus_setup)(void __iomem *ioaddr); - void *bsp_priv; + int rx_coe; + int no_csum_insertion; int phy_irq; struct phy_device *phydev; @@ -77,7 +72,6 @@ struct stmmac_priv { unsigned int flow_ctrl; unsigned int pause; struct mii_bus *mii; - int mii_clk_csr; u32 msg_enable; spinlock_t lock; @@ -90,10 +84,7 @@ struct stmmac_priv { #ifdef STMMAC_VLAN_TAG_USED struct vlan_group *vlgrp; #endif - int enh_desc; - int rx_coe; - int bugged_jumbo; - int no_csum_insertion; + struct plat_stmmacenet_data *plat; }; #ifdef CONFIG_STM_DRIVERS diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c index 6d65482e789a..f2695fd180ca 100644 --- a/drivers/net/stmmac/stmmac_ethtool.c +++ b/drivers/net/stmmac/stmmac_ethtool.c @@ -94,7 +94,7 @@ static void stmmac_ethtool_getdrvinfo(struct net_device *dev, { struct stmmac_priv *priv = netdev_priv(dev); - if (!priv->is_gmac) + if (!priv->plat->has_gmac) strcpy(info->driver, MAC100_ETHTOOL_NAME); else strcpy(info->driver, GMAC_ETHTOOL_NAME); @@ -176,7 +176,7 @@ static void stmmac_ethtool_gregs(struct net_device *dev, memset(reg_space, 0x0, REG_SPACE_SIZE); - if (!priv->is_gmac) { + if (!priv->plat->has_gmac) { /* MAC registers */ for (i = 0; i < 12; i++) reg_space[i] = readl(priv->ioaddr + (i * 4)); diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c index 06bc6034ce81..29ba28660fa9 100644 --- a/drivers/net/stmmac/stmmac_main.c +++ b/drivers/net/stmmac/stmmac_main.c @@ -186,6 +186,18 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1; } +/* On some ST platforms, some HW system configuraton registers have to be + * set according to the link speed negotiated. + */ +static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) +{ + struct phy_device *phydev = priv->phydev; + + if (likely(priv->plat->fix_mac_speed)) + priv->plat->fix_mac_speed(priv->plat->bsp_priv, + phydev->speed); +} + /** * stmmac_adjust_link * @dev: net device structure @@ -228,15 +240,13 @@ static void stmmac_adjust_link(struct net_device *dev) new_state = 1; switch (phydev->speed) { case 1000: - if (likely(priv->is_gmac)) + if (likely(priv->plat->has_gmac)) ctrl &= ~priv->hw->link.port; - if (likely(priv->fix_mac_speed)) - priv->fix_mac_speed(priv->bsp_priv, - phydev->speed); + stmmac_hw_fix_mac_speed(priv); break; case 100: case 10: - if (priv->is_gmac) { + if (priv->plat->has_gmac) { ctrl |= priv->hw->link.port; if (phydev->speed == SPEED_100) { ctrl |= priv->hw->link.speed; @@ -246,9 +256,7 @@ static void stmmac_adjust_link(struct net_device *dev) } else { ctrl &= ~priv->hw->link.port; } - if (likely(priv->fix_mac_speed)) - priv->fix_mac_speed(priv->bsp_priv, - phydev->speed); + stmmac_hw_fix_mac_speed(priv); break; default: if (netif_msg_link(priv)) @@ -305,7 +313,7 @@ static int stmmac_init_phy(struct net_device *dev) return 0; } - snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->plat->bus_id); snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, priv->phy_addr); pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id); @@ -552,7 +560,7 @@ static void free_dma_desc_resources(struct stmmac_priv *priv) */ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) { - if (likely((priv->tx_coe) && (!priv->no_csum_insertion))) { + if (likely((priv->plat->tx_coe) && (!priv->no_csum_insertion))) { /* In case of GMAC, SF mode has to be enabled * to perform the TX COE. This depends on: * 1) TX COE if actually supported @@ -814,7 +822,7 @@ static int stmmac_open(struct net_device *dev) init_dma_desc_rings(dev); /* DMA initialization and SW reset */ - if (unlikely(priv->hw->dma->init(priv->ioaddr, priv->pbl, + if (unlikely(priv->hw->dma->init(priv->ioaddr, priv->plat->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) { @@ -825,15 +833,15 @@ static int stmmac_open(struct net_device *dev) /* Copy the MAC addr into the HW */ priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0); /* If required, perform hw setup of the bus. */ - if (priv->bus_setup) - priv->bus_setup(priv->ioaddr); + if (priv->plat->bus_setup) + priv->plat->bus_setup(priv->ioaddr); /* Initialize the MAC Core */ priv->hw->mac->core_init(priv->ioaddr); priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr); if (priv->rx_coe) pr_info("stmmac: Rx Checksum Offload Engine supported\n"); - if (priv->tx_coe) + if (priv->plat->tx_coe) pr_info("\tTX Checksum insertion supported\n"); priv->shutdown = 0; @@ -1042,7 +1050,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) return stmmac_sw_tso(priv, skb); if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) { - if (unlikely((!priv->tx_coe) || (priv->no_csum_insertion))) + if (unlikely((!priv->plat->tx_coe) || + (priv->no_csum_insertion))) skb_checksum_help(skb); else csum_insertion = 1; @@ -1146,7 +1155,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv) DMA_FROM_DEVICE); (p + entry)->des2 = priv->rx_skbuff_dma[entry]; - if (unlikely(priv->is_gmac)) { + if (unlikely(priv->plat->has_gmac)) { if (bfsize >= BUF_SIZE_8KiB) (p + entry)->des3 = (p + entry)->des2 + BUF_SIZE_8KiB; @@ -1356,7 +1365,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu) return -EBUSY; } - if (priv->is_gmac) + if (priv->plat->has_gmac) max_mtu = JUMBO_LEN; else max_mtu = ETH_DATA_LEN; @@ -1370,7 +1379,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu) * needs to have the Tx COE disabled for oversized frames * (due to limited buffer sizes). In this case we disable * the TX csum insertionin the TDES and not use SF. */ - if ((priv->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN)) + if ((priv->plat->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN)) priv->no_csum_insertion = 1; else priv->no_csum_insertion = 0; @@ -1390,7 +1399,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) return IRQ_NONE; } - if (priv->is_gmac) + if (priv->plat->has_gmac) /* To handle GMAC own interrupts */ priv->hw->mac->host_irq_status((void __iomem *) dev->base_addr); @@ -1536,7 +1545,7 @@ static int stmmac_mac_device_setup(struct net_device *dev) struct mac_device_info *device; - if (priv->is_gmac) + if (priv->plat->has_gmac) device = dwmac1000_setup(priv->ioaddr); else device = dwmac100_setup(priv->ioaddr); @@ -1544,7 +1553,7 @@ static int stmmac_mac_device_setup(struct net_device *dev) if (!device) return -ENOMEM; - if (priv->enh_desc) { + if (priv->plat->enh_desc) { device->desc = &enh_desc_ops; pr_info("\tEnhanced descriptor structure\n"); } else @@ -1598,7 +1607,7 @@ static int stmmac_associate_phy(struct device *dev, void *data) plat_dat->bus_id); /* Check that this phy is for the MAC being initialised */ - if (priv->bus_id != plat_dat->bus_id) + if (priv->plat->bus_id != plat_dat->bus_id) return 0; /* OK, this PHY is connected to the MAC. @@ -1683,13 +1692,9 @@ static int stmmac_dvr_probe(struct platform_device *pdev) priv->device = &(pdev->dev); priv->dev = ndev; plat_dat = pdev->dev.platform_data; - priv->bus_id = plat_dat->bus_id; - priv->pbl = plat_dat->pbl; /* TLI */ - priv->mii_clk_csr = plat_dat->clk_csr; - priv->tx_coe = plat_dat->tx_coe; - priv->bugged_jumbo = plat_dat->bugged_jumbo; - priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */ - priv->enh_desc = plat_dat->enh_desc; + + priv->plat = plat_dat; + priv->ioaddr = addr; /* PMT module is not integrated in all the MAC devices. */ @@ -1727,16 +1732,12 @@ static int stmmac_dvr_probe(struct platform_device *pdev) goto out; } - priv->fix_mac_speed = plat_dat->fix_mac_speed; - priv->bus_setup = plat_dat->bus_setup; - priv->bsp_priv = plat_dat->bsp_priv; - pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n" "\tIO base addr: 0x%p)\n", ndev->name, pdev->name, pdev->id, ndev->irq, addr); /* MDIO bus Registration */ - pr_debug("\tMDIO bus (id: %d)...", priv->bus_id); + pr_debug("\tMDIO bus (id: %d)...", priv->plat->bus_id); ret = stmmac_mdio_register(ndev); if (ret < 0) goto out; diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c index d7441616357d..234b4068a1fc 100644 --- a/drivers/net/stmmac/stmmac_mdio.c +++ b/drivers/net/stmmac/stmmac_mdio.c @@ -53,7 +53,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) int data; u16 regValue = (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))); - regValue |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2); + regValue |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2); do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1); writel(regValue, priv->ioaddr + mii_address); @@ -85,7 +85,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))) | MII_WRITE; - value |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2); + value |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2); /* Wait until any existing MII operation is complete */ @@ -114,7 +114,7 @@ static int stmmac_mdio_reset(struct mii_bus *bus) if (priv->phy_reset) { pr_debug("stmmac_mdio_reset: calling phy_reset\n"); - priv->phy_reset(priv->bsp_priv); + priv->phy_reset(priv->plat->bsp_priv); } /* This is a workaround for problems with the STE101P PHY. @@ -157,7 +157,7 @@ int stmmac_mdio_register(struct net_device *ndev) new_bus->read = &stmmac_mdio_read; new_bus->write = &stmmac_mdio_write; new_bus->reset = &stmmac_mdio_reset; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->plat->bus_id); new_bus->priv = ndev; new_bus->irq = irqlist; new_bus->phy_mask = priv->phy_mask; |