qlogic: Move the QLogic drivers

Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and
the necessary Kconfig and Makefile changes.

CC: Ron Mercer <ron.mercer@qlogic.com>
CC: Amit Kumar Salecha <amit.salecha@qlogic.com>
CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>

1 files changed, 0 insertions, 1284 deletions

diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
deleted file mode 100644
index ff2bf8a4e247..000000000000
--- a/drivers/net/qlge/qlge_mpi.c
+++ /dev/null
@@ -1,1284 +0,0 @@
-#include "qlge.h"
-
-int ql_unpause_mpi_risc(struct ql_adapter *qdev)
-{
-	u32 tmp;
-
-	/* Un-pause the RISC */
-	tmp = ql_read32(qdev, CSR);
-	if (!(tmp & CSR_RP))
-		return -EIO;
-
-	ql_write32(qdev, CSR, CSR_CMD_CLR_PAUSE);
-	return 0;
-}
-
-int ql_pause_mpi_risc(struct ql_adapter *qdev)
-{
-	u32 tmp;
-	int count = UDELAY_COUNT;
-
-	/* Pause the RISC */
-	ql_write32(qdev, CSR, CSR_CMD_SET_PAUSE);
-	do {
-		tmp = ql_read32(qdev, CSR);
-		if (tmp & CSR_RP)
-			break;
-		mdelay(UDELAY_DELAY);
-		count--;
-	} while (count);
-	return (count == 0) ? -ETIMEDOUT : 0;
-}
-
-int ql_hard_reset_mpi_risc(struct ql_adapter *qdev)
-{
-	u32 tmp;
-	int count = UDELAY_COUNT;
-
-	/* Reset the RISC */
-	ql_write32(qdev, CSR, CSR_CMD_SET_RST);
-	do {
-		tmp = ql_read32(qdev, CSR);
-		if (tmp & CSR_RR) {
-			ql_write32(qdev, CSR, CSR_CMD_CLR_RST);
-			break;
-		}
-		mdelay(UDELAY_DELAY);
-		count--;
-	} while (count);
-	return (count == 0) ? -ETIMEDOUT : 0;
-}
-
-int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
-{
-	int status;
-	/* wait for reg to come ready */
-	status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
-	if (status)
-		goto exit;
-	/* set up for reg read */
-	ql_write32(qdev, PROC_ADDR, reg | PROC_ADDR_R);
-	/* wait for reg to come ready */
-	status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
-	if (status)
-		goto exit;
-	/* get the data */
-	*data = ql_read32(qdev, PROC_DATA);
-exit:
-	return status;
-}
-
-int ql_write_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 data)
-{
-	int status = 0;
-	/* wait for reg to come ready */
-	status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
-	if (status)
-		goto exit;
-	/* write the data to the data reg */
-	ql_write32(qdev, PROC_DATA, data);
-	/* trigger the write */
-	ql_write32(qdev, PROC_ADDR, reg);
-	/* wait for reg to come ready */
-	status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
-	if (status)
-		goto exit;
-exit:
-	return status;
-}
-
-int ql_soft_reset_mpi_risc(struct ql_adapter *qdev)
-{
-	int status;
-	status = ql_write_mpi_reg(qdev, 0x00001010, 1);
-	return status;
-}
-
-/* Determine if we are in charge of the firwmare. If
- * we are the lower of the 2 NIC pcie functions, or if
- * we are the higher function and the lower function
- * is not enabled.
- */
-int ql_own_firmware(struct ql_adapter *qdev)
-{
-	u32 temp;
-
-	/* If we are the lower of the 2 NIC functions
-	 * on the chip the we are responsible for
-	 * core dump and firmware reset after an error.
-	 */
-	if (qdev->func < qdev->alt_func)
-		return 1;
-
-	/* If we are the higher of the 2 NIC functions
-	 * on the chip and the lower function is not
-	 * enabled, then we are responsible for
-	 * core dump and firmware reset after an error.
-	 */
-	temp =  ql_read32(qdev, STS);
-	if (!(temp & (1 << (8 + qdev->alt_func))))
-		return 1;
-
-	return 0;
-
-}
-
-static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int i, status;
-
-	status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK);
-	if (status)
-		return -EBUSY;
-	for (i = 0; i < mbcp->out_count; i++) {
-		status =
-		    ql_read_mpi_reg(qdev, qdev->mailbox_out + i,
-				     &mbcp->mbox_out[i]);
-		if (status) {
-			netif_err(qdev, drv, qdev->ndev, "Failed mailbox read.\n");
-			break;
-		}
-	}
-	ql_sem_unlock(qdev, SEM_PROC_REG_MASK);	/* does flush too */
-	return status;
-}
-
-/* Wait for a single mailbox command to complete.
- * Returns zero on success.
- */
-static int ql_wait_mbx_cmd_cmplt(struct ql_adapter *qdev)
-{
-	int count = 100;
-	u32 value;
-
-	do {
-		value = ql_read32(qdev, STS);
-		if (value & STS_PI)
-			return 0;
-		mdelay(UDELAY_DELAY); /* 100ms */
-	} while (--count);
-	return -ETIMEDOUT;
-}
-
-/* Execute a single mailbox command.
- * Caller must hold PROC_ADDR semaphore.
- */
-static int ql_exec_mb_cmd(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int i, status;
-
-	/*
-	 * Make sure there's nothing pending.
-	 * This shouldn't happen.
-	 */
-	if (ql_read32(qdev, CSR) & CSR_HRI)
-		return -EIO;
-
-	status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK);
-	if (status)
-		return status;
-
-	/*
-	 * Fill the outbound mailboxes.
-	 */
-	for (i = 0; i < mbcp->in_count; i++) {
-		status = ql_write_mpi_reg(qdev, qdev->mailbox_in + i,
-						mbcp->mbox_in[i]);
-		if (status)
-			goto end;
-	}
-	/*
-	 * Wake up the MPI firmware.
-	 */
-	ql_write32(qdev, CSR, CSR_CMD_SET_H2R_INT);
-end:
-	ql_sem_unlock(qdev, SEM_PROC_REG_MASK);
-	return status;
-}
-
-/* We are being asked by firmware to accept
- * a change to the port.  This is only
- * a change to max frame sizes (Tx/Rx), pause
- * parameters, or loopback mode. We wake up a worker
- * to handler processing this since a mailbox command
- * will need to be sent to ACK the request.
- */
-static int ql_idc_req_aen(struct ql_adapter *qdev)
-{
-	int status;
-	struct mbox_params *mbcp = &qdev->idc_mbc;
-
-	netif_err(qdev, drv, qdev->ndev, "Enter!\n");
-	/* Get the status data and start up a thread to
-	 * handle the request.
-	 */
-	mbcp = &qdev->idc_mbc;
-	mbcp->out_count = 4;
-	status = ql_get_mb_sts(qdev, mbcp);
-	if (status) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Could not read MPI, resetting ASIC!\n");
-		ql_queue_asic_error(qdev);
-	} else	{
-		/* Begin polled mode early so
-		 * we don't get another interrupt
-		 * when we leave mpi_worker.
-		 */
-		ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
-		queue_delayed_work(qdev->workqueue, &qdev->mpi_idc_work, 0);
-	}
-	return status;
-}
-
-/* Process an inter-device event completion.
- * If good, signal the caller's completion.
- */
-static int ql_idc_cmplt_aen(struct ql_adapter *qdev)
-{
-	int status;
-	struct mbox_params *mbcp = &qdev->idc_mbc;
-	mbcp->out_count = 4;
-	status = ql_get_mb_sts(qdev, mbcp);
-	if (status) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Could not read MPI, resetting RISC!\n");
-		ql_queue_fw_error(qdev);
-	} else
-		/* Wake up the sleeping mpi_idc_work thread that is
-		 * waiting for this event.
-		 */
-		complete(&qdev->ide_completion);
-
-	return status;
-}
-
-static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int status;
-	mbcp->out_count = 2;
-
-	status = ql_get_mb_sts(qdev, mbcp);
-	if (status) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "%s: Could not get mailbox status.\n", __func__);
-		return;
-	}
-
-	qdev->link_status = mbcp->mbox_out[1];
-	netif_err(qdev, drv, qdev->ndev, "Link Up.\n");
-
-	/* If we're coming back from an IDC event
-	 * then set up the CAM and frame routing.
-	 */
-	if (test_bit(QL_CAM_RT_SET, &qdev->flags)) {
-		status = ql_cam_route_initialize(qdev);
-		if (status) {
-			netif_err(qdev, ifup, qdev->ndev,
-				  "Failed to init CAM/Routing tables.\n");
-			return;
-		} else
-			clear_bit(QL_CAM_RT_SET, &qdev->flags);
-	}
-
-	/* Queue up a worker to check the frame
-	 * size information, and fix it if it's not
-	 * to our liking.
-	 */
-	if (!test_bit(QL_PORT_CFG, &qdev->flags)) {
-		netif_err(qdev, drv, qdev->ndev, "Queue Port Config Worker!\n");
-		set_bit(QL_PORT_CFG, &qdev->flags);
-		/* Begin polled mode early so
-		 * we don't get another interrupt
-		 * when we leave mpi_worker dpc.
-		 */
-		ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
-		queue_delayed_work(qdev->workqueue,
-				&qdev->mpi_port_cfg_work, 0);
-	}
-
-	ql_link_on(qdev);
-}
-
-static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int status;
-
-	mbcp->out_count = 3;
-
-	status = ql_get_mb_sts(qdev, mbcp);
-	if (status)
-		netif_err(qdev, drv, qdev->ndev, "Link down AEN broken!\n");
-
-	ql_link_off(qdev);
-}
-
-static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int status;
-
-	mbcp->out_count = 5;
-
-	status = ql_get_mb_sts(qdev, mbcp);
-	if (status)
-		netif_err(qdev, drv, qdev->ndev, "SFP in AEN broken!\n");
-	else
-		netif_err(qdev, drv, qdev->ndev, "SFP insertion detected.\n");
-
-	return status;
-}
-
-static int ql_sfp_out(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int status;
-
-	mbcp->out_count = 1;
-
-	status = ql_get_mb_sts(qdev, mbcp);
-	if (status)
-		netif_err(qdev, drv, qdev->ndev, "SFP out AEN broken!\n");
-	else
-		netif_err(qdev, drv, qdev->ndev, "SFP removal detected.\n");
-
-	return status;
-}
-
-static int ql_aen_lost(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int status;
-
-	mbcp->out_count = 6;
-
-	status = ql_get_mb_sts(qdev, mbcp);
-	if (status)
-		netif_err(qdev, drv, qdev->ndev, "Lost AEN broken!\n");
-	else {
-		int i;
-		netif_err(qdev, drv, qdev->ndev, "Lost AEN detected.\n");
-		for (i = 0; i < mbcp->out_count; i++)
-			netif_err(qdev, drv, qdev->ndev, "mbox_out[%d] = 0x%.08x.\n",
-				  i, mbcp->mbox_out[i]);
-
-	}
-
-	return status;
-}
-
-static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int status;
-
-	mbcp->out_count = 2;
-
-	status = ql_get_mb_sts(qdev, mbcp);
-	if (status) {
-		netif_err(qdev, drv, qdev->ndev, "Firmware did not initialize!\n");
-	} else {
-		netif_err(qdev, drv, qdev->ndev, "Firmware Revision  = 0x%.08x.\n",
-			  mbcp->mbox_out[1]);
-		qdev->fw_rev_id = mbcp->mbox_out[1];
-		status = ql_cam_route_initialize(qdev);
-		if (status)
-			netif_err(qdev, ifup, qdev->ndev,
-				  "Failed to init CAM/Routing tables.\n");
-	}
-}
-
-/* Process an async event and clear it unless it's an
- * error condition.
- *  This can get called iteratively from the mpi_work thread
- *  when events arrive via an interrupt.
- *  It also gets called when a mailbox command is polling for
- *  it's completion. */
-static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int status;
-	int orig_count = mbcp->out_count;
-
-	/* Just get mailbox zero for now. */
-	mbcp->out_count = 1;
-	status = ql_get_mb_sts(qdev, mbcp);
-	if (status) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Could not read MPI, resetting ASIC!\n");
-		ql_queue_asic_error(qdev);
-		goto end;
-	}
-
-	switch (mbcp->mbox_out[0]) {
-
-	/* This case is only active when we arrive here
-	 * as a result of issuing a mailbox command to
-	 * the firmware.
-	 */
-	case MB_CMD_STS_INTRMDT:
-	case MB_CMD_STS_GOOD:
-	case MB_CMD_STS_INVLD_CMD:
-	case MB_CMD_STS_XFC_ERR:
-	case MB_CMD_STS_CSUM_ERR:
-	case MB_CMD_STS_ERR:
-	case MB_CMD_STS_PARAM_ERR:
-		/* We can only get mailbox status if we're polling from an
-		 * unfinished command.  Get the rest of the status data and
-		 * return back to the caller.
-		 * We only end up here when we're polling for a mailbox
-		 * command completion.
-		 */
-		mbcp->out_count = orig_count;
-		status = ql_get_mb_sts(qdev, mbcp);
-		return status;
-
-	/* We are being asked by firmware to accept
-	 * a change to the port.  This is only
-	 * a change to max frame sizes (Tx/Rx), pause
-	 * parameters, or loopback mode.
-	 */
-	case AEN_IDC_REQ:
-		status = ql_idc_req_aen(qdev);
-		break;
-
-	/* Process and inbound IDC event.
-	 * This will happen when we're trying to
-	 * change tx/rx max frame size, change pause
-	 * parameters or loopback mode.
-	 */
-	case AEN_IDC_CMPLT:
-	case AEN_IDC_EXT:
-		status = ql_idc_cmplt_aen(qdev);
-		break;
-
-	case AEN_LINK_UP:
-		ql_link_up(qdev, mbcp);
-		break;
-
-	case AEN_LINK_DOWN:
-		ql_link_down(qdev, mbcp);
-		break;
-
-	case AEN_FW_INIT_DONE:
-		/* If we're in process on executing the firmware,
-		 * then convert the status to normal mailbox status.
-		 */
-		if (mbcp->mbox_in[0] == MB_CMD_EX_FW) {
-			mbcp->out_count = orig_count;
-			status = ql_get_mb_sts(qdev, mbcp);
-			mbcp->mbox_out[0] = MB_CMD_STS_GOOD;
-			return status;
-		}
-		ql_init_fw_done(qdev, mbcp);
-		break;
-
-	case AEN_AEN_SFP_IN:
-		ql_sfp_in(qdev, mbcp);
-		break;
-
-	case AEN_AEN_SFP_OUT:
-		ql_sfp_out(qdev, mbcp);
-		break;
-
-	/* This event can arrive at boot time or after an
-	 * MPI reset if the firmware failed to initialize.
-	 */
-	case AEN_FW_INIT_FAIL:
-		/* If we're in process on executing the firmware,
-		 * then convert the status to normal mailbox status.
-		 */
-		if (mbcp->mbox_in[0] == MB_CMD_EX_FW) {
-			mbcp->out_count = orig_count;
-			status = ql_get_mb_sts(qdev, mbcp);
-			mbcp->mbox_out[0] = MB_CMD_STS_ERR;
-			return status;
-		}
-		netif_err(qdev, drv, qdev->ndev,
-			  "Firmware initialization failed.\n");
-		status = -EIO;
-		ql_queue_fw_error(qdev);
-		break;
-
-	case AEN_SYS_ERR:
-		netif_err(qdev, drv, qdev->ndev, "System Error.\n");
-		ql_queue_fw_error(qdev);
-		status = -EIO;
-		break;
-
-	case AEN_AEN_LOST:
-		ql_aen_lost(qdev, mbcp);
-		break;
-
-	case AEN_DCBX_CHG:
-		/* Need to support AEN 8110 */
-		break;
-	default:
-		netif_err(qdev, drv, qdev->ndev,
-			  "Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
-		/* Clear the MPI firmware status. */
-	}
-end:
-	ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
-	/* Restore the original mailbox count to
-	 * what the caller asked for.  This can get
-	 * changed when a mailbox command is waiting
-	 * for a response and an AEN arrives and
-	 * is handled.
-	 * */
-	mbcp->out_count = orig_count;
-	return status;
-}
-
-/* Execute a single mailbox command.
- * mbcp is a pointer to an array of u32.  Each
- * element in the array contains the value for it's
- * respective mailbox register.
- */
-static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
-{
-	int status;
-	unsigned long count;
-
-	mutex_lock(&qdev->mpi_mutex);
-
-	/* Begin polled mode for MPI */
-	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
-
-	/* Load the mailbox registers and wake up MPI RISC. */
-	status = ql_exec_mb_cmd(qdev, mbcp);
-	if (status)
-		goto end;
-
-
-	/* If we're generating a system error, then there's nothing
-	 * to wait for.
-	 */
-	if (mbcp->mbox_in[0] == MB_CMD_MAKE_SYS_ERR)
-		goto end;
-
-	/* Wait for the command to complete. We loop
-	 * here because some AEN might arrive while
-	 * we're waiting for the mailbox command to
-	 * complete. If more than 5 seconds expire we can
-	 * assume something is wrong. */
-	count = jiffies + HZ * MAILBOX_TIMEOUT;
-	do {
-		/* Wait for the interrupt to come in. */
-		status = ql_wait_mbx_cmd_cmplt(qdev);
-		if (status)
-			continue;
-
-		/* Process the event.  If it's an AEN, it
-		 * will be handled in-line or a worker
-		 * will be spawned. If it's our completion
-		 * we will catch it below.
-		 */
-		status = ql_mpi_handler(qdev, mbcp);
-		if (status)
-			goto end;
-
-		/* It's either the completion for our mailbox
-		 * command complete or an AEN.  If it's our
-		 * completion then get out.
-		 */
-		if (((mbcp->mbox_out[0] & 0x0000f000) ==
-					MB_CMD_STS_GOOD) ||
-			((mbcp->mbox_out[0] & 0x0000f000) ==
-					MB_CMD_STS_INTRMDT))
-			goto done;
-	} while (time_before(jiffies, count));
-
-	netif_err(qdev, drv, qdev->ndev,
-		  "Timed out waiting for mailbox complete.\n");
-	status = -ETIMEDOUT;
-	goto end;
-
-done:
-
-	/* Now we can clear the interrupt condition
-	 * and look at our status.
-	 */
-	ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
-
-	if (((mbcp->mbox_out[0] & 0x0000f000) !=
-					MB_CMD_STS_GOOD) &&
-		((mbcp->mbox_out[0] & 0x0000f000) !=
-					MB_CMD_STS_INTRMDT)) {
-		status = -EIO;
-	}
-end:
-	/* End polled mode for MPI */
-	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
-	mutex_unlock(&qdev->mpi_mutex);
-	return status;
-}
-
-/* Get MPI firmware version. This will be used for
- * driver banner and for ethtool info.
- * Returns zero on success.
- */
-int ql_mb_about_fw(struct ql_adapter *qdev)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status = 0;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 1;
-	mbcp->out_count = 3;
-
-	mbcp->mbox_in[0] = MB_CMD_ABOUT_FW;
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Failed about firmware command\n");
-		status = -EIO;
-	}
-
-	/* Store the firmware version */
-	qdev->fw_rev_id = mbcp->mbox_out[1];
-
-	return status;
-}
-
-/* Get functional state for MPI firmware.
- * Returns zero on success.
- */
-int ql_mb_get_fw_state(struct ql_adapter *qdev)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status = 0;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 1;
-	mbcp->out_count = 2;
-
-	mbcp->mbox_in[0] = MB_CMD_GET_FW_STATE;
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Failed Get Firmware State.\n");
-		status = -EIO;
-	}
-
-	/* If bit zero is set in mbx 1 then the firmware is
-	 * running, but not initialized.  This should never
-	 * happen.
-	 */
-	if (mbcp->mbox_out[1] & 1) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Firmware waiting for initialization.\n");
-		status = -EIO;
-	}
-
-	return status;
-}
-
-/* Send and ACK mailbox command to the firmware to
- * let it continue with the change.
- */
-static int ql_mb_idc_ack(struct ql_adapter *qdev)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status = 0;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 5;
-	mbcp->out_count = 1;
-
-	mbcp->mbox_in[0] = MB_CMD_IDC_ACK;
-	mbcp->mbox_in[1] = qdev->idc_mbc.mbox_out[1];
-	mbcp->mbox_in[2] = qdev->idc_mbc.mbox_out[2];
-	mbcp->mbox_in[3] = qdev->idc_mbc.mbox_out[3];
-	mbcp->mbox_in[4] = qdev->idc_mbc.mbox_out[4];
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev, "Failed IDC ACK send.\n");
-		status = -EIO;
-	}
-	return status;
-}
-
-/* Get link settings and maximum frame size settings
- * for the current port.
- * Most likely will block.
- */
-int ql_mb_set_port_cfg(struct ql_adapter *qdev)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status = 0;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 3;
-	mbcp->out_count = 1;
-
-	mbcp->mbox_in[0] = MB_CMD_SET_PORT_CFG;
-	mbcp->mbox_in[1] = qdev->link_config;
-	mbcp->mbox_in[2] = qdev->max_frame_size;
-
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] == MB_CMD_STS_INTRMDT) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Port Config sent, wait for IDC.\n");
-	} else	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Failed Set Port Configuration.\n");
-		status = -EIO;
-	}
-	return status;
-}
-
-static int ql_mb_dump_ram(struct ql_adapter *qdev, u64 req_dma, u32 addr,
-	u32 size)
-{
-	int status = 0;
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 9;
-	mbcp->out_count = 1;
-
-	mbcp->mbox_in[0] = MB_CMD_DUMP_RISC_RAM;
-	mbcp->mbox_in[1] = LSW(addr);
-	mbcp->mbox_in[2] = MSW(req_dma);
-	mbcp->mbox_in[3] = LSW(req_dma);
-	mbcp->mbox_in[4] = MSW(size);
-	mbcp->mbox_in[5] = LSW(size);
-	mbcp->mbox_in[6] = MSW(MSD(req_dma));
-	mbcp->mbox_in[7] = LSW(MSD(req_dma));
-	mbcp->mbox_in[8] = MSW(addr);
-
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev, "Failed to dump risc RAM.\n");
-		status = -EIO;
-	}
-	return status;
-}
-
-/* Issue a mailbox command to dump RISC RAM. */
-int ql_dump_risc_ram_area(struct ql_adapter *qdev, void *buf,
-		u32 ram_addr, int word_count)
-{
-	int status;
-	char *my_buf;
-	dma_addr_t buf_dma;
-
-	my_buf = pci_alloc_consistent(qdev->pdev, word_count * sizeof(u32),
-					&buf_dma);
-	if (!my_buf)
-		return -EIO;
-
-	status = ql_mb_dump_ram(qdev, buf_dma, ram_addr, word_count);
-	if (!status)
-		memcpy(buf, my_buf, word_count * sizeof(u32));
-
-	pci_free_consistent(qdev->pdev, word_count * sizeof(u32), my_buf,
-				buf_dma);
-	return status;
-}
-
-/* Get link settings and maximum frame size settings
- * for the current port.
- * Most likely will block.
- */
-int ql_mb_get_port_cfg(struct ql_adapter *qdev)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status = 0;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 1;
-	mbcp->out_count = 3;
-
-	mbcp->mbox_in[0] = MB_CMD_GET_PORT_CFG;
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Failed Get Port Configuration.\n");
-		status = -EIO;
-	} else	{
-		netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
-			     "Passed Get Port Configuration.\n");
-		qdev->link_config = mbcp->mbox_out[1];
-		qdev->max_frame_size = mbcp->mbox_out[2];
-	}
-	return status;
-}
-
-int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 2;
-	mbcp->out_count = 1;
-
-	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MODE;
-	mbcp->mbox_in[1] = wol;
-
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n");
-		status = -EIO;
-	}
-	return status;
-}
-
-int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status;
-	u8 *addr = qdev->ndev->dev_addr;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 8;
-	mbcp->out_count = 1;
-
-	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MAGIC;
-	if (enable_wol) {
-		mbcp->mbox_in[1] = (u32)addr[0];
-		mbcp->mbox_in[2] = (u32)addr[1];
-		mbcp->mbox_in[3] = (u32)addr[2];
-		mbcp->mbox_in[4] = (u32)addr[3];
-		mbcp->mbox_in[5] = (u32)addr[4];
-		mbcp->mbox_in[6] = (u32)addr[5];
-		mbcp->mbox_in[7] = 0;
-	} else {
-		mbcp->mbox_in[1] = 0;
-		mbcp->mbox_in[2] = 1;
-		mbcp->mbox_in[3] = 1;
-		mbcp->mbox_in[4] = 1;
-		mbcp->mbox_in[5] = 1;
-		mbcp->mbox_in[6] = 1;
-		mbcp->mbox_in[7] = 0;
-	}
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n");
-		status = -EIO;
-	}
-	return status;
-}
-
-/* IDC - Inter Device Communication...
- * Some firmware commands require consent of adjacent FCOE
- * function.  This function waits for the OK, or a
- * counter-request for a little more time.i
- * The firmware will complete the request if the other
- * function doesn't respond.
- */
-static int ql_idc_wait(struct ql_adapter *qdev)
-{
-	int status = -ETIMEDOUT;
-	long wait_time = 1 * HZ;
-	struct mbox_params *mbcp = &qdev->idc_mbc;
-	do {
-		/* Wait here for the command to complete
-		 * via the IDC process.
-		 */
-		wait_time =
-			wait_for_completion_timeout(&qdev->ide_completion,
-							wait_time);
-		if (!wait_time) {
-			netif_err(qdev, drv, qdev->ndev, "IDC Timeout.\n");
-			break;
-		}
-		/* Now examine the response from the IDC process.
-		 * We might have a good completion or a request for
-		 * more wait time.
-		 */
-		if (mbcp->mbox_out[0] == AEN_IDC_EXT) {
-			netif_err(qdev, drv, qdev->ndev,
-				  "IDC Time Extension from function.\n");
-			wait_time += (mbcp->mbox_out[1] >> 8) & 0x0000000f;
-		} else if (mbcp->mbox_out[0] == AEN_IDC_CMPLT) {
-			netif_err(qdev, drv, qdev->ndev, "IDC Success.\n");
-			status = 0;
-			break;
-		} else {
-			netif_err(qdev, drv, qdev->ndev,
-				  "IDC: Invalid State 0x%.04x.\n",
-				  mbcp->mbox_out[0]);
-			status = -EIO;
-			break;
-		}
-	} while (wait_time);
-
-	return status;
-}
-
-int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 2;
-	mbcp->out_count = 1;
-
-	mbcp->mbox_in[0] = MB_CMD_SET_LED_CFG;
-	mbcp->mbox_in[1] = led_config;
-
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Failed to set LED Configuration.\n");
-		status = -EIO;
-	}
-
-	return status;
-}
-
-int ql_mb_get_led_cfg(struct ql_adapter *qdev)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 1;
-	mbcp->out_count = 2;
-
-	mbcp->mbox_in[0] = MB_CMD_GET_LED_CFG;
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Failed to get LED Configuration.\n");
-		status = -EIO;
-	} else
-		qdev->led_config = mbcp->mbox_out[1];
-
-	return status;
-}
-
-int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 1;
-	mbcp->out_count = 2;
-
-	mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL;
-	mbcp->mbox_in[1] = control;
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD)
-		return status;
-
-	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Command not supported by firmware.\n");
-		status = -EINVAL;
-	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
-		/* This indicates that the firmware is
-		 * already in the state we are trying to
-		 * change it to.
-		 */
-		netif_err(qdev, drv, qdev->ndev,
-			  "Command parameters make no change.\n");
-	}
-	return status;
-}
-
-/* Returns a negative error code or the mailbox command status. */
-static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-	*control = 0;
-
-	mbcp->in_count = 1;
-	mbcp->out_count = 1;
-
-	mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL;
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) {
-		*control = mbcp->mbox_in[1];
-		return status;
-	}
-
-	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Command not supported by firmware.\n");
-		status = -EINVAL;
-	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Failed to get MPI traffic control.\n");
-		status = -EIO;
-	}
-	return status;
-}
-
-int ql_wait_fifo_empty(struct ql_adapter *qdev)
-{
-	int count = 5;
-	u32 mgmnt_fifo_empty;
-	u32 nic_fifo_empty;
-
-	do {
-		nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE;
-		ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty);
-		mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY;
-		if (nic_fifo_empty && mgmnt_fifo_empty)
-			return 0;
-		msleep(100);
-	} while (count-- > 0);
-	return -ETIMEDOUT;
-}
-
-/* API called in work thread context to set new TX/RX
- * maximum frame size values to match MTU.
- */
-static int ql_set_port_cfg(struct ql_adapter *qdev)
-{
-	int status;
-	status = ql_mb_set_port_cfg(qdev);
-	if (status)
-		return status;
-	status = ql_idc_wait(qdev);
-	return status;
-}
-
-/* The following routines are worker threads that process
- * events that may sleep waiting for completion.
- */
-
-/* This thread gets the maximum TX and RX frame size values
- * from the firmware and, if necessary, changes them to match
- * the MTU setting.
- */
-void ql_mpi_port_cfg_work(struct work_struct *work)
-{
-	struct ql_adapter *qdev =
-	    container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
-	int status;
-
-	status = ql_mb_get_port_cfg(qdev);
-	if (status) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Bug: Failed to get port config data.\n");
-		goto err;
-	}
-
-	if (qdev->link_config & CFG_JUMBO_FRAME_SIZE &&
-			qdev->max_frame_size ==
-			CFG_DEFAULT_MAX_FRAME_SIZE)
-		goto end;
-
-	qdev->link_config |=	CFG_JUMBO_FRAME_SIZE;
-	qdev->max_frame_size = CFG_DEFAULT_MAX_FRAME_SIZE;
-	status = ql_set_port_cfg(qdev);
-	if (status) {
-		netif_err(qdev, drv, qdev->ndev,
-			  "Bug: Failed to set port config data.\n");
-		goto err;
-	}
-end:
-	clear_bit(QL_PORT_CFG, &qdev->flags);
-	return;
-err:
-	ql_queue_fw_error(qdev);
-	goto end;
-}
-
-/* Process an inter-device request.  This is issues by
- * the firmware in response to another function requesting
- * a change to the port. We set a flag to indicate a change
- * has been made and then send a mailbox command ACKing
- * the change request.
- */
-void ql_mpi_idc_work(struct work_struct *work)
-{
-	struct ql_adapter *qdev =
-	    container_of(work, struct ql_adapter, mpi_idc_work.work);
-	int status;
-	struct mbox_params *mbcp = &qdev->idc_mbc;
-	u32 aen;
-	int timeout;
-
-	aen = mbcp->mbox_out[1] >> 16;
-	timeout = (mbcp->mbox_out[1] >> 8) & 0xf;
-
-	switch (aen) {
-	default:
-		netif_err(qdev, drv, qdev->ndev,
-			  "Bug: Unhandled IDC action.\n");
-		break;
-	case MB_CMD_PORT_RESET:
-	case MB_CMD_STOP_FW:
-		ql_link_off(qdev);
-	case MB_CMD_SET_PORT_CFG:
-		/* Signal the resulting link up AEN
-		 * that the frame routing and mac addr
-		 * needs to be set.
-		 * */
-		set_bit(QL_CAM_RT_SET, &qdev->flags);
-		/* Do ACK if required */
-		if (timeout) {
-			status = ql_mb_idc_ack(qdev);
-			if (status)
-				netif_err(qdev, drv, qdev->ndev,
-					  "Bug: No pending IDC!\n");
-		} else {
-			netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
-				     "IDC ACK not required\n");
-			status = 0; /* success */
-		}
-		break;
-
-	/* These sub-commands issued by another (FCoE)
-	 * function are requesting to do an operation
-	 * on the shared resource (MPI environment).
-	 * We currently don't issue these so we just
-	 * ACK the request.
-	 */
-	case MB_CMD_IOP_RESTART_MPI:
-	case MB_CMD_IOP_PREP_LINK_DOWN:
-		/* Drop the link, reload the routing
-		 * table when link comes up.
-		 */
-		ql_link_off(qdev);
-		set_bit(QL_CAM_RT_SET, &qdev->flags);
-		/* Fall through. */
-	case MB_CMD_IOP_DVR_START:
-	case MB_CMD_IOP_FLASH_ACC:
-	case MB_CMD_IOP_CORE_DUMP_MPI:
-	case MB_CMD_IOP_PREP_UPDATE_MPI:
-	case MB_CMD_IOP_COMP_UPDATE_MPI:
-	case MB_CMD_IOP_NONE:	/*  an IDC without params */
-		/* Do ACK if required */
-		if (timeout) {
-			status = ql_mb_idc_ack(qdev);
-			if (status)
-				netif_err(qdev, drv, qdev->ndev,
-					  "Bug: No pending IDC!\n");
-		} else {
-			netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
-				     "IDC ACK not required\n");
-			status = 0; /* success */
-		}
-		break;
-	}
-}
-
-void ql_mpi_work(struct work_struct *work)
-{
-	struct ql_adapter *qdev =
-	    container_of(work, struct ql_adapter, mpi_work.work);
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int err = 0;
-
-	mutex_lock(&qdev->mpi_mutex);
-	/* Begin polled mode for MPI */
-	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
-
-	while (ql_read32(qdev, STS) & STS_PI) {
-		memset(mbcp, 0, sizeof(struct mbox_params));
-		mbcp->out_count = 1;
-		/* Don't continue if an async event
-		 * did not complete properly.
-		 */
-		err = ql_mpi_handler(qdev, mbcp);
-		if (err)
-			break;
-	}
-
-	/* End polled mode for MPI */
-	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
-	mutex_unlock(&qdev->mpi_mutex);
-	ql_enable_completion_interrupt(qdev, 0);
-}
-
-void ql_mpi_reset_work(struct work_struct *work)
-{
-	struct ql_adapter *qdev =
-	    container_of(work, struct ql_adapter, mpi_reset_work.work);
-	cancel_delayed_work_sync(&qdev->mpi_work);
-	cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
-	cancel_delayed_work_sync(&qdev->mpi_idc_work);
-	/* If we're not the dominant NIC function,
-	 * then there is nothing to do.
-	 */
-	if (!ql_own_firmware(qdev)) {
-		netif_err(qdev, drv, qdev->ndev, "Don't own firmware!\n");
-		return;
-	}
-
-	if (!ql_core_dump(qdev, qdev->mpi_coredump)) {
-		netif_err(qdev, drv, qdev->ndev, "Core is dumped!\n");
-		qdev->core_is_dumped = 1;
-		queue_delayed_work(qdev->workqueue,
-			&qdev->mpi_core_to_log, 5 * HZ);
-	}
-	ql_soft_reset_mpi_risc(qdev);
-}