Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Mostly simple overlapping changes.

For example, David Ahern's adjacency list revamp in 'net-next'
conflicted with an adjacency list traversal bug fix in 'net'.

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 42 insertions, 26 deletions

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index dd47b69ddcff..c1e52b9dc58d 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -42,19 +42,24 @@
 #define AT803X_MMD_ACCESS_CONTROL		0x0D
 #define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
 #define AT803X_FUNC_DATA			0x4003
+#define AT803X_REG_CHIP_CONFIG			0x1f
+#define AT803X_BT_BX_REG_SEL			0x8000
 
 #define AT803X_DEBUG_ADDR			0x1D
 #define AT803X_DEBUG_DATA			0x1E
 
+#define AT803X_MODE_CFG_MASK			0x0F
+#define AT803X_MODE_CFG_SGMII			0x01
+
+#define AT803X_PSSR			0x11	/*PHY-Specific Status Register*/
+#define AT803X_PSSR_MR_AN_COMPLETE	0x0200
+
 #define AT803X_DEBUG_REG_0			0x00
 #define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
 
 #define AT803X_DEBUG_REG_5			0x05
 #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
 
-#define AT803X_REG_CHIP_CONFIG			0x1f
-#define AT803X_BT_BX_REG_SEL			0x8000
-
 #define ATH8030_PHY_ID 0x004dd076
 #define ATH8031_PHY_ID 0x004dd074
 #define ATH8035_PHY_ID 0x004dd072
@@ -210,7 +215,6 @@ static int at803x_suspend(struct phy_device *phydev)
 {
 	int value;
 	int wol_enabled;
-	int ccr;
 
 	mutex_lock(&phydev->lock);
 
@@ -226,16 +230,6 @@ static int at803x_suspend(struct phy_device *phydev)
 
 	phy_write(phydev, MII_BMCR, value);
 
-	if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
-		goto done;
-
-	/* also power-down SGMII interface */
-	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
-	phy_write(phydev, MII_BMCR, phy_read(phydev, MII_BMCR) | BMCR_PDOWN);
-	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
 	mutex_unlock(&phydev->lock);
 
 	return 0;
@@ -244,7 +238,6 @@ done:
 static int at803x_resume(struct phy_device *phydev)
 {
 	int value;
-	int ccr;
 
 	mutex_lock(&phydev->lock);
 
@@ -252,17 +245,6 @@ static int at803x_resume(struct phy_device *phydev)
 	value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
 	phy_write(phydev, MII_BMCR, value);
 
-	if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
-		goto done;
-
-	/* also power-up SGMII interface */
-	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
-	value = phy_read(phydev, MII_BMCR) & ~(BMCR_PDOWN | BMCR_ISOLATE);
-	phy_write(phydev, MII_BMCR, value);
-	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
 	mutex_unlock(&phydev->lock);
 
 	return 0;
@@ -382,6 +364,36 @@ static void at803x_link_change_notify(struct phy_device *phydev)
 	}
 }
 
+static int at803x_aneg_done(struct phy_device *phydev)
+{
+	int ccr;
+
+	int aneg_done = genphy_aneg_done(phydev);
+	if (aneg_done != BMSR_ANEGCOMPLETE)
+		return aneg_done;
+
+	/*
+	 * in SGMII mode, if copper side autoneg is successful,
+	 * also check SGMII side autoneg result
+	 */
+	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
+	if ((ccr & AT803X_MODE_CFG_MASK) != AT803X_MODE_CFG_SGMII)
+		return aneg_done;
+
+	/* switch to SGMII/fiber page */
+	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
+
+	/* check if the SGMII link is OK. */
+	if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
+		pr_warn("803x_aneg_done: SGMII link is not ok\n");
+		aneg_done = 0;
+	}
+	/* switch back to copper page */
+	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
+
+	return aneg_done;
+}
+
 static struct phy_driver at803x_driver[] = {
 {
 	/* ATHEROS 8035 */
@@ -433,6 +445,7 @@ static struct phy_driver at803x_driver[] = {
 	.flags			= PHY_HAS_INTERRUPT,
 	.config_aneg		= genphy_config_aneg,
 	.read_status		= genphy_read_status,
+	.aneg_done		= at803x_aneg_done,
 	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
 } };
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 03d54c4adc88..800b39f06279 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -19,6 +19,7 @@
 #define TI_DP83848C_PHY_ID		0x20005ca0
 #define NS_DP83848C_PHY_ID		0x20005c90
 #define TLK10X_PHY_ID			0x2000a210
+#define TI_DP83822_PHY_ID		0x2000a240
 
 /* Registers */
 #define DP83848_MICR			0x11 /* MII Interrupt Control Register */
@@ -77,6 +78,7 @@ static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
 	{ TI_DP83848C_PHY_ID, 0xfffffff0 },
 	{ NS_DP83848C_PHY_ID, 0xfffffff0 },
 	{ TLK10X_PHY_ID, 0xfffffff0 },
+	{ TI_DP83822_PHY_ID, 0xfffffff0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
@@ -105,6 +107,7 @@ static struct phy_driver dp83848_driver[] = {
 	DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY"),
 	DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY"),
 	DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY"),
+	DP83848_PHY_DRIVER(TI_DP83822_PHY_ID, "TI DP83822 10/100 Mbps PHY"),
 };
 module_phy_driver(dp83848_driver);