summaryrefslogtreecommitdiff
path: root/drivers/net/phy/mdio-bcm-unimac.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-09-07 00:45:08 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-09-07 00:45:08 +0300
commitaae3dbb4776e7916b6cd442d00159bea27a695c1 (patch)
treed074c5d783a81e7e2e084b1eba77f57459da7e37 /drivers/net/phy/mdio-bcm-unimac.c
parentec3604c7a5aae8953545b0d05495357009a960e5 (diff)
parent66bed8465a808400eb14562510e26c8818082cb8 (diff)
downloadlinux-aae3dbb4776e7916b6cd442d00159bea27a695c1.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
Diffstat (limited to 'drivers/net/phy/mdio-bcm-unimac.c')
-rw-r--r--drivers/net/phy/mdio-bcm-unimac.c103
1 files changed, 70 insertions, 33 deletions
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 34395230ce70..08e0647b85e2 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -21,6 +21,8 @@
#include <linux/of_platform.h>
#include <linux/of_mdio.h>
+#include <linux/platform_data/mdio-bcm-unimac.h>
+
#define MDIO_CMD 0x00
#define MDIO_START_BUSY (1 << 29)
#define MDIO_READ_FAIL (1 << 28)
@@ -41,46 +43,80 @@
struct unimac_mdio_priv {
struct mii_bus *mii_bus;
void __iomem *base;
+ int (*wait_func) (void *wait_func_data);
+ void *wait_func_data;
};
+static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset)
+{
+ /* MIPS chips strapped for BE will automagically configure the
+ * peripheral registers for CPU-native byte order.
+ */
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ return __raw_readl(priv->base + offset);
+ else
+ return readl_relaxed(priv->base + offset);
+}
+
+static inline void unimac_mdio_writel(struct unimac_mdio_priv *priv, u32 val,
+ u32 offset)
+{
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ __raw_writel(val, priv->base + offset);
+ else
+ writel_relaxed(val, priv->base + offset);
+}
+
static inline void unimac_mdio_start(struct unimac_mdio_priv *priv)
{
u32 reg;
- reg = __raw_readl(priv->base + MDIO_CMD);
+ reg = unimac_mdio_readl(priv, MDIO_CMD);
reg |= MDIO_START_BUSY;
- __raw_writel(reg, priv->base + MDIO_CMD);
+ unimac_mdio_writel(priv, reg, MDIO_CMD);
}
static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv)
{
- return __raw_readl(priv->base + MDIO_CMD) & MDIO_START_BUSY;
+ return unimac_mdio_readl(priv, MDIO_CMD) & MDIO_START_BUSY;
+}
+
+static int unimac_mdio_poll(void *wait_func_data)
+{
+ struct unimac_mdio_priv *priv = wait_func_data;
+ unsigned int timeout = 1000;
+
+ do {
+ if (!unimac_mdio_busy(priv))
+ return 0;
+
+ usleep_range(1000, 2000);
+ } while (--timeout);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ return 0;
}
static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
{
struct unimac_mdio_priv *priv = bus->priv;
- unsigned int timeout = 1000;
+ int ret;
u32 cmd;
/* Prepare the read operation */
cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT);
- __raw_writel(cmd, priv->base + MDIO_CMD);
+ unimac_mdio_writel(priv, cmd, MDIO_CMD);
/* Start MDIO transaction */
unimac_mdio_start(priv);
- do {
- if (!unimac_mdio_busy(priv))
- break;
+ ret = priv->wait_func(priv->wait_func_data);
+ if (ret)
+ return ret;
- usleep_range(1000, 2000);
- } while (timeout--);
-
- if (!timeout)
- return -ETIMEDOUT;
-
- cmd = __raw_readl(priv->base + MDIO_CMD);
+ cmd = unimac_mdio_readl(priv, MDIO_CMD);
/* Some broken devices are known not to release the line during
* turn-around, e.g: Broadcom BCM53125 external switches, so check for
@@ -97,27 +133,16 @@ static int unimac_mdio_write(struct mii_bus *bus, int phy_id,
int reg, u16 val)
{
struct unimac_mdio_priv *priv = bus->priv;
- unsigned int timeout = 1000;
u32 cmd;
/* Prepare the write operation */
cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) |
(reg << MDIO_REG_SHIFT) | (0xffff & val);
- __raw_writel(cmd, priv->base + MDIO_CMD);
+ unimac_mdio_writel(priv, cmd, MDIO_CMD);
unimac_mdio_start(priv);
- do {
- if (!unimac_mdio_busy(priv))
- break;
-
- usleep_range(1000, 2000);
- } while (timeout--);
-
- if (!timeout)
- return -ETIMEDOUT;
-
- return 0;
+ return priv->wait_func(priv->wait_func_data);
}
/* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with
@@ -155,8 +180,10 @@ static int unimac_mdio_reset(struct mii_bus *bus)
}
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
- if (read_mask & 1 << addr)
+ if (read_mask & 1 << addr) {
+ dev_dbg(&bus->dev, "Workaround for PHY @ %d\n", addr);
mdiobus_read(bus, addr, MII_BMSR);
+ }
}
return 0;
@@ -164,6 +191,7 @@ static int unimac_mdio_reset(struct mii_bus *bus)
static int unimac_mdio_probe(struct platform_device *pdev)
{
+ struct unimac_mdio_pdata *pdata = pdev->dev.platform_data;
struct unimac_mdio_priv *priv;
struct device_node *np;
struct mii_bus *bus;
@@ -193,12 +221,21 @@ static int unimac_mdio_probe(struct platform_device *pdev)
bus = priv->mii_bus;
bus->priv = priv;
- bus->name = "unimac MII bus";
+ if (pdata) {
+ bus->name = pdata->bus_name;
+ priv->wait_func = pdata->wait_func;
+ priv->wait_func_data = pdata->wait_func_data;
+ bus->phy_mask = ~pdata->phy_mask;
+ } else {
+ bus->name = "unimac MII bus";
+ priv->wait_func_data = priv;
+ priv->wait_func = unimac_mdio_poll;
+ }
bus->parent = &pdev->dev;
bus->read = unimac_mdio_read;
bus->write = unimac_mdio_write;
bus->reset = unimac_mdio_reset;
- snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
ret = of_mdiobus_register(bus, np);
if (ret) {
@@ -240,7 +277,7 @@ MODULE_DEVICE_TABLE(of, unimac_mdio_ids);
static struct platform_driver unimac_mdio_driver = {
.driver = {
- .name = "unimac-mdio",
+ .name = UNIMAC_MDIO_DRV_NAME,
.of_match_table = unimac_mdio_ids,
},
.probe = unimac_mdio_probe,
@@ -251,4 +288,4 @@ module_platform_driver(unimac_mdio_driver);
MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:unimac-mdio");
+MODULE_ALIAS("platform:" UNIMAC_MDIO_DRV_NAME);