diff options
| author | Harini Katakam <harini.katakam@xilinx.com> | 2016-06-27 10:39:59 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2016-06-29 11:07:36 +0300 |
| commit | 3ec0a0f10ceb77c78f540ded1d13bf0cf7f89a07 (patch) | |
| tree | 7eb8838a7e169ea92cea1dfde69b3b0892c2fe43 /drivers/net/phy/marvell.c | |
| parent | d10f0b312adc21b9b78e36cf695e6157989ce041 (diff) | |
| download | linux-3ec0a0f10ceb77c78f540ded1d13bf0cf7f89a07.tar.xz | |
net: marvell: Add separate config ANEG function for Marvell 88E1111
Marvell 88E1111 currently uses the generic marvell config ANEG function.
This function has a sequence accessing Page 5 and Register 31,
both of which are not defined or reserved for this PHY.
Hence this patch adds a new config ANEG function for Marvell 88E1111
without these erroneous accesses.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/marvell.c')
| -rw-r--r-- | drivers/net/phy/marvell.c | 44 |
1 files changed, 43 insertions, 1 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 79ccc11facc3..ec2c1eee6405 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -285,6 +285,48 @@ static int marvell_config_aneg(struct phy_device *phydev) return 0; } +static int m88e1111_config_aneg(struct phy_device *phydev) +{ + int err; + + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation + */ + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + + err = marvell_set_polarity(phydev, phydev->mdix); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL, + MII_M1111_PHY_LED_DIRECT); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + if (err < 0) + return err; + + if (phydev->autoneg != AUTONEG_ENABLE) { + int bmcr; + + /* A write to speed/duplex bits (that is performed by + * genphy_config_aneg() call above) must be followed by + * a software reset. Otherwise, the write has no effect. + */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET); + if (err < 0) + return err; + } + + return 0; +} + #ifdef CONFIG_OF_MDIO /* * Set and/or override some configuration registers based on the @@ -1175,7 +1217,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1111_config_init, - .config_aneg = &marvell_config_aneg, + .config_aneg = &m88e1111_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, |