net: phy: ti: implement generic .handle_interrupt() callback

In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.

Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 37 insertions, 0 deletions

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index c162c9551bd1..bb512ac3f533 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -303,6 +303,41 @@ static int dp83822_config_intr(struct phy_device *phydev)
 	return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
 }
 
+static irqreturn_t dp83822_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	/* The MISR1 and MISR2 registers are holding the interrupt status in
+	 * the upper half (15:8), while the lower half (7:0) is used for
+	 * controlling the interrupt enable state of those individual interrupt
+	 * sources. To determine the possible interrupt sources, just read the
+	 * MISR* register and use it directly to know which interrupts have
+	 * been enabled previously or not.
+	 */
+	irq_status = phy_read(phydev, MII_DP83822_MISR1);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+		goto trigger_machine;
+
+	irq_status = phy_read(phydev, MII_DP83822_MISR2);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+		goto trigger_machine;
+
+	return IRQ_NONE;
+
+trigger_machine:
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
 static int dp8382x_disable_wol(struct phy_device *phydev)
 {
 	int value = DP83822_WOL_EN | DP83822_WOL_MAGIC_EN |
@@ -576,6 +611,7 @@ static int dp83822_resume(struct phy_device *phydev)
 		.set_wol = dp83822_set_wol,			\
 		.ack_interrupt = dp83822_ack_interrupt,		\
 		.config_intr = dp83822_config_intr,		\
+		.handle_interrupt = dp83822_handle_interrupt,	\
 		.suspend = dp83822_suspend,			\
 		.resume = dp83822_resume,			\
 	}
@@ -591,6 +627,7 @@ static int dp83822_resume(struct phy_device *phydev)
 		.set_wol = dp83822_set_wol,			\
 		.ack_interrupt = dp83822_ack_interrupt,		\
 		.config_intr = dp83822_config_intr,		\
+		.handle_interrupt = dp83822_handle_interrupt,	\
 		.suspend = dp83822_suspend,			\
 		.resume = dp83822_resume,			\
 	}