intel: Move the Intel wired LAN drivers

Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 125 deletions

diff --git a/drivers/net/igbvf/defines.h b/drivers/net/igbvf/defines.h
deleted file mode 100644
index 79f2604673fe..000000000000
--- a/drivers/net/igbvf/defines.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*******************************************************************************
-
-  Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 1999 - 2010 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_DEFINES_H_
-#define _E1000_DEFINES_H_
-
-/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define REQ_TX_DESCRIPTOR_MULTIPLE  8
-#define REQ_RX_DESCRIPTOR_MULTIPLE  8
-
-/* IVAR valid bit */
-#define E1000_IVAR_VALID        0x80
-
-/* Receive Descriptor bit definitions */
-#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
-#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
-#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
-#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
-#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
-#define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
-#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
-#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
-
-#define E1000_RXDEXT_STATERR_CE    0x01000000
-#define E1000_RXDEXT_STATERR_SE    0x02000000
-#define E1000_RXDEXT_STATERR_SEQ   0x04000000
-#define E1000_RXDEXT_STATERR_CXE   0x10000000
-#define E1000_RXDEXT_STATERR_TCPE  0x20000000
-#define E1000_RXDEXT_STATERR_IPE   0x40000000
-#define E1000_RXDEXT_STATERR_RXE   0x80000000
-
-
-/* Same mask, but for extended and packet split descriptors */
-#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
-    E1000_RXDEXT_STATERR_CE  |            \
-    E1000_RXDEXT_STATERR_SE  |            \
-    E1000_RXDEXT_STATERR_SEQ |            \
-    E1000_RXDEXT_STATERR_CXE |            \
-    E1000_RXDEXT_STATERR_RXE)
-
-/* Device Control */
-#define E1000_CTRL_RST      0x04000000  /* Global reset */
-
-/* Device Status */
-#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
-#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
-#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
-
-#define SPEED_10    10
-#define SPEED_100   100
-#define SPEED_1000  1000
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
-
-/* Transmit Descriptor bit definitions */
-#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
-
-#define MAX_JUMBO_FRAME_SIZE    0x3F00
-
-/* 802.1q VLAN Packet Size */
-#define VLAN_TAG_SIZE              4    /* 802.3ac tag (not DMA'd) */
-
-/* Error Codes */
-#define E1000_SUCCESS      0
-#define E1000_ERR_CONFIG   3
-#define E1000_ERR_MAC_INIT 5
-#define E1000_ERR_MBX      15
-
-#ifndef ETH_ADDR_LEN
-#define ETH_ADDR_LEN                 6
-#endif
-
-/* SRRCTL bit definitions */
-#define E1000_SRRCTL_BSIZEPKT_SHIFT                     10 /* Shift _right_ */
-#define E1000_SRRCTL_BSIZEHDRSIZE_MASK                  0x00000F00
-#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT                 2  /* Shift _left_ */
-#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF                0x02000000
-#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS          0x0A000000
-#define E1000_SRRCTL_DESCTYPE_MASK                      0x0E000000
-#define E1000_SRRCTL_DROP_EN                            0x80000000
-
-#define E1000_SRRCTL_BSIZEPKT_MASK      0x0000007F
-#define E1000_SRRCTL_BSIZEHDR_MASK      0x00003F00
-
-/* Additional Descriptor Control definitions */
-#define E1000_TXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Tx Queue */
-#define E1000_RXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Rx Queue */
-
-/* Direct Cache Access (DCA) definitions */
-#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
-
-#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
-
-#endif /* _E1000_DEFINES_H_ */