drivers/net: Trim trailing whitespace

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 77 insertions, 77 deletions

diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index ff5a67d619bb..03b3df33d81b 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1,24 +1,24 @@
 /*
-** hp100.c 
+** hp100.c
 ** HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters
 **
 ** $Id: hp100.c,v 1.58 2001/09/24 18:03:01 perex Exp perex $
 **
 ** Based on the HP100 driver written by Jaroslav Kysela <perex@jcu.cz>
-** Extended for new busmaster capable chipsets by 
+** Extended for new busmaster capable chipsets by
 ** Siegfried "Frieder" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>
 **
 ** Maintained by: Jaroslav Kysela <perex@suse.cz>
-** 
+**
 ** This driver has only been tested with
 ** -- HP J2585B 10/100 Mbit/s PCI Busmaster
-** -- HP J2585A 10/100 Mbit/s PCI 
+** -- HP J2585A 10/100 Mbit/s PCI
 ** -- HP J2970A 10 Mbit/s PCI Combo 10base-T/BNC
 ** -- HP J2973A 10 Mbit/s PCI 10base-T
 ** -- HP J2573  10/100 ISA
 ** -- Compex ReadyLink ENET100-VG4  10/100 Mbit/s PCI / EISA
 ** -- Compex FreedomLine 100/VG  10/100 Mbit/s ISA / EISA / PCI
-** 
+**
 ** but it should also work with the other CASCADE based adapters.
 **
 ** TODO:
@@ -65,7 +65,7 @@
 **   - timing changes in xmit routines, relogin to 100VG hub added when
 **     driver does reset
 **   - included fix for Compex FreedomLine PCI adapter
-** 
+**
 ** 1.54 -> 1.55
 **   - fixed bad initialization in init_module
 **   - added Compex FreedomLine adapter
@@ -73,10 +73,10 @@
 **
 ** 1.53 -> 1.54
 **   - added hardware multicast filter support (doesn't work)
-**   - little changes in hp100_sense_lan routine 
+**   - little changes in hp100_sense_lan routine
 **     - added support for Coax and AUI (J2970)
 **   - fix for multiple cards and hp100_mode parameter (insmod)
-**   - fix for shared IRQ 
+**   - fix for shared IRQ
 **
 ** 1.52 -> 1.53
 **   - fixed bug in multicast support
@@ -286,7 +286,7 @@ static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
 
 static inline u_int pdl_map_data(struct hp100_private *lp, void *data)
 {
-	return pci_map_single(lp->pci_dev, data, 
+	return pci_map_single(lp->pci_dev, data,
 			      MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
 }
 
@@ -353,7 +353,7 @@ static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
 		goto err;
 
 	for (i = 0; i < ARRAY_SIZE(hp100_isa_tbl); i++) {
-		if (!strcmp(hp100_isa_tbl[i], sig)) 
+		if (!strcmp(hp100_isa_tbl[i], sig))
 			break;
 
 	}
@@ -373,11 +373,11 @@ static int  __init hp100_isa_probe(struct net_device *dev, int addr)
 {
 	int err = -ENODEV;
 
-	/* Probe for a specific ISA address */		
+	/* Probe for a specific ISA address */
 	if (addr > 0xff && addr < 0x400)
 		err = hp100_isa_probe1(dev, addr);
 
-	else if (addr != 0) 
+	else if (addr != 0)
 		err = -ENXIO;
 
 	else {
@@ -448,7 +448,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
 	if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100"))
 		goto out1;
 
-	if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE) 
+	if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE)
 		goto out2;
 
 	chip = hp100_inw(PAGING) & HP100_CHIPID_MASK;
@@ -491,7 +491,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
 	 * Use the variable "hp100_mode" upon insmod or as kernel parameter to
 	 * force driver modes:
 	 * hp100_mode=1 -> default, use busmaster mode if configured.
-	 * hp100_mode=2 -> enable shared memory mode 
+	 * hp100_mode=2 -> enable shared memory mode
 	 * hp100_mode=3 -> force use of i/o mapped mode.
 	 * hp100_mode=4 -> same as 1, but re-set the enable bit on the card.
 	 */
@@ -689,9 +689,9 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
 	hp100_clear_stats(lp, ioaddr);
 
 	/* If busmaster mode is wanted, a dma-capable memory area is needed for
-	 * the rx and tx PDLs 
+	 * the rx and tx PDLs
 	 * PCI cards can access the whole PC memory. Therefore GFP_DMA is not
-	 * needed for the allocation of the memory area. 
+	 * needed for the allocation of the memory area.
 	 */
 
 	/* TODO: We do not need this with old cards, where PDLs are stored
@@ -718,7 +718,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
 	}
 
 	/* Initialise the card. */
-	/* (I'm not really sure if it's a good idea to do this during probing, but 
+	/* (I'm not really sure if it's a good idea to do this during probing, but
 	 * like this it's assured that the lan connection type can be sensed
 	 * correctly)
 	 */
@@ -778,8 +778,8 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
 	return 0;
 out3:
 	if (local_mode == 1)
-		pci_free_consistent(lp->pci_dev, MAX_RINGSIZE + 0x0f, 
-				    lp->page_vaddr_algn, 
+		pci_free_consistent(lp->pci_dev, MAX_RINGSIZE + 0x0f,
+				    lp->page_vaddr_algn,
 				    virt_to_whatever(dev, lp->page_vaddr_algn));
 	if (mem_ptr_virt)
 		iounmap(mem_ptr_virt);
@@ -860,7 +860,7 @@ static void hp100_hwinit(struct net_device *dev)
 	/* Next comes code from mmuinit procedure of SCO BM driver which is
 	 * called from HWconfigure in the SCO driver.  */
 
-	/* Initialise MMU, eventually switch on Busmaster Mode, initialise 
+	/* Initialise MMU, eventually switch on Busmaster Mode, initialise
 	 * multicast filter...
 	 */
 	hp100_mmuinit(dev);
@@ -878,11 +878,11 @@ static void hp100_hwinit(struct net_device *dev)
 		hp100_login_to_vg_hub(dev, 0);	/* relogin */
 
 }
-
 
-/* 
+
+/*
  * mmuinit - Reinitialise Cascade MMU and MAC settings.
- * Note: Must already be in reset and leaves card in reset. 
+ * Note: Must already be in reset and leaves card in reset.
  */
 static void hp100_mmuinit(struct net_device *dev)
 {
@@ -908,7 +908,7 @@ static void hp100_mmuinit(struct net_device *dev)
 	hp100_outw(0xffff, IRQ_STATUS);	/* ack IRQ */
 
 	/*
-	 * Enable Hardware 
+	 * Enable Hardware
 	 * - Clear Debug En, Rx Hdr Pipe, EE En, I/O En, Fake Int and Intr En
 	 * - Set Tri-State Int, Bus Master Rd/Wr, and Mem Map Disable
 	 * - Clear Priority, Advance Pkt and Xmit Cmd
@@ -983,7 +983,7 @@ static void hp100_mmuinit(struct net_device *dev)
 			 * 4 bytes for header). We will leave NUM_RXPDLS * 508 (rounded
 			 * to the next higher 1k boundary) bytes for the rx-pdl's
 			 * Note: For non-etr chips the transmit stop register must be
-			 * programmed on a 1k boundary, i.e. bits 9:0 must be zero. 
+			 * programmed on a 1k boundary, i.e. bits 9:0 must be zero.
 			 */
 			pdl_stop = lp->memory_size;
 			xmit_stop = (pdl_stop - 508 * (MAX_RX_PDL) - 16) & ~(0x03ff);
@@ -1131,10 +1131,10 @@ static int hp100_close(struct net_device *dev)
 
 	return 0;
 }
-
+
 
 /*
- * Configure the PDL Rx rings and LAN 
+ * Configure the PDL Rx rings and LAN
  */
 static void hp100_init_pdls(struct net_device *dev)
 {
@@ -1182,7 +1182,7 @@ static void hp100_init_pdls(struct net_device *dev)
 		}
 	}
 }
-
+
 
 /* These functions "format" the entries in the pdl structure   */
 /* They return how much memory the fragments need.            */
@@ -1200,10 +1200,10 @@ static int hp100_init_rxpdl(struct net_device *dev,
 	ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr + 1);
 	ringptr->skb = (void *) NULL;
 
-	/* 
+	/*
 	 * Write address and length of first PDL Fragment (which is used for
 	 * storing the RX-Header
-	 * We use the 4 bytes _before_ the PDH in the pdl memory area to 
+	 * We use the 4 bytes _before_ the PDH in the pdl memory area to
 	 * store this information. (PDH is at offset 0x04)
 	 */
 	/* Note that pdlptr+1 and not pdlptr is the pointer to the PDH */
@@ -1230,9 +1230,9 @@ static int hp100_init_txpdl(struct net_device *dev,
 }
 
 /*
- * hp100_build_rx_pdl allocates an skb_buff of maximum size plus two bytes 
+ * hp100_build_rx_pdl allocates an skb_buff of maximum size plus two bytes
  * for possible odd word alignment rounding up to next dword and set PDL
- * address for fragment#2 
+ * address for fragment#2
  * Returns: 0 if unable to allocate skb_buff
  *          1 if successful
  */
@@ -1252,13 +1252,13 @@ static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
 #endif
 
 	/* Allocate skb buffer of maximum size */
-	/* Note: This depends on the alloc_skb functions allocating more 
+	/* Note: This depends on the alloc_skb functions allocating more
 	 * space than requested, i.e. aligning to 16bytes */
 
 	ringptr->skb = dev_alloc_skb(((MAX_ETHER_SIZE + 2 + 3) / 4) * 4);
 
 	if (NULL != ringptr->skb) {
-		/* 
+		/*
 		 * Reserve 2 bytes at the head of the buffer to land the IP header
 		 * on a long word boundary (According to the Network Driver section
 		 * in the Linux KHG, this should help to increase performance.)
@@ -1270,10 +1270,10 @@ static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
 
 		/* ringptr->pdl points to the beginning of the PDL, i.e. the PDH */
 		/* Note: 1st Fragment is used for the 4 byte packet status
-		 * (receive header). Its PDL entries are set up by init_rxpdl. So 
+		 * (receive header). Its PDL entries are set up by init_rxpdl. So
 		 * here we only have to set up the PDL fragment entries for the data
-		 * part. Those 4 bytes will be stored in the DMA memory region 
-		 * directly before the PDL. 
+		 * part. Those 4 bytes will be stored in the DMA memory region
+		 * directly before the PDL.
 		 */
 #ifdef HP100_DEBUG_BM
 		printk("hp100: %s: build_rx_pdl: PDH@0x%x, skb->data (len %d) at 0x%x\n",
@@ -1285,7 +1285,7 @@ static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
 		/* Conversion to new PCI API : map skbuf data to PCI bus.
 		 * Doc says it's OK for EISA as well - Jean II */
 		ringptr->pdl[0] = 0x00020000;	/* Write PDH */
-		ringptr->pdl[3] = pdl_map_data(netdev_priv(dev), 
+		ringptr->pdl[3] = pdl_map_data(netdev_priv(dev),
 					       ringptr->skb->data);
 		ringptr->pdl[4] = MAX_ETHER_SIZE;	/* Length of Data */
 
@@ -1406,7 +1406,7 @@ static void hp100_BM_shutdown(struct net_device *dev)
 			}
 		} else {	/* Shasta or Rainier Shutdown/Reset */
 			/* To ensure all bus master inloading activity has ceased,
-			 * wait for no Rx PDAs or no Rx packets on card. 
+			 * wait for no Rx PDAs or no Rx packets on card.
 			 */
 			hp100_page(PERFORMANCE);
 			/* 100 ms timeout */
@@ -1422,7 +1422,7 @@ static void hp100_BM_shutdown(struct net_device *dev)
 
 			/* To ensure all bus master outloading activity has ceased,
 			 * wait until the Tx PDA count goes to zero or no more Tx space
-			 * available in the Tx region of the card. 
+			 * available in the Tx region of the card.
 			 */
 			/* 100 ms timeout */
 			for (time = 0; time < 10000; time++) {
@@ -1461,7 +1461,7 @@ static int hp100_check_lan(struct net_device *dev)
 	return 0;
 }
 
-/* 
+/*
  *  transmit functions
  */
 
@@ -1485,7 +1485,7 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
 
 	if (skb->len <= 0)
 		return 0;
-		
+
 	if (lp->chip == HP100_CHIPID_SHASTA && skb_padto(skb, ETH_ZLEN))
 		return 0;
 
@@ -1575,14 +1575,14 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
 
 	return 0;
 }
-
+
 
 /* clean_txring checks if packets have been sent by the card by reading
  * the TX_PDL register from the performance page and comparing it to the
  * number of commited packets. It then frees the skb's of the packets that
  * obviously have been sent to the network.
  *
- * Needs the PERFORMANCE page selected. 
+ * Needs the PERFORMANCE page selected.
  */
 static void hp100_clean_txring(struct net_device *dev)
 {
@@ -1743,15 +1743,15 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	return 0;
 }
-
+
 
 /*
  * Receive Function (Non-Busmaster mode)
- * Called when an "Receive Packet" interrupt occurs, i.e. the receive 
+ * Called when an "Receive Packet" interrupt occurs, i.e. the receive
  * packet counter is non-zero.
  * For non-busmaster, this function does the whole work of transfering
  * the packet to the host memory and then up to higher layers via skb
- * and netif_rx. 
+ * and netif_rx.
  */
 
 static void hp100_rx(struct net_device *dev)
@@ -1854,7 +1854,7 @@ static void hp100_rx(struct net_device *dev)
 #endif
 }
 
-/* 
+/*
  * Receive Function for Busmaster Mode
  */
 static void hp100_rx_bm(struct net_device *dev)
@@ -1875,7 +1875,7 @@ static void hp100_rx_bm(struct net_device *dev)
 		printk("hp100: %s: rx_bm called although no PDLs were committed to adapter?\n", dev->name);
 		return;
 	} else
-		/* RX_PKT_CNT states how many PDLs are currently formatted and available to 
+		/* RX_PKT_CNT states how many PDLs are currently formatted and available to
 		 * the cards BM engine */
 	if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) {
 		printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n",
@@ -1888,7 +1888,7 @@ static void hp100_rx_bm(struct net_device *dev)
 	while ((lp->rxrcommit > hp100_inb(RX_PDL))) {
 		/*
 		 * The packet was received into the pdl pointed to by lp->rxrhead (
-		 * the oldest pdl in the ring 
+		 * the oldest pdl in the ring
 		 */
 
 		/* First we get the header, which contains information about the */
@@ -2043,7 +2043,7 @@ static void hp100_clear_stats(struct hp100_private *lp, int ioaddr)
 	hp100_page(PERFORMANCE);
 	spin_unlock_irqrestore(&lp->lock, flags);
 }
-
+
 
 /*
  *  multicast setup
@@ -2220,9 +2220,9 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	/* We're only interested in those interrupts we really enabled. */
 	/* val &= hp100_inw( IRQ_MASK ); */
 
-	/* 
-	 * RX_PDL_FILL_COMPL is set whenever a RX_PDL has been executed. A RX_PDL 
-	 * is considered executed whenever the RX_PDL data structure is no longer 
+	/*
+	 * RX_PDL_FILL_COMPL is set whenever a RX_PDL has been executed. A RX_PDL
+	 * is considered executed whenever the RX_PDL data structure is no longer
 	 * needed.
 	 */
 	if (val & HP100_RX_PDL_FILL_COMPL) {
@@ -2233,7 +2233,7 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		}
 	}
 
-	/* 
+	/*
 	 * The RX_PACKET interrupt is set, when the receive packet counter is
 	 * non zero. We use this interrupt for receiving in slave mode. In
 	 * busmaster mode, we use it to make sure we did not miss any rx_pdl_fill
@@ -2259,10 +2259,10 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	hp100_outw(val, IRQ_STATUS);
 
 	/*
-	 * RX_ERROR is set when a packet is dropped due to no memory resources on 
-	 * the card or when a RCV_ERR occurs. 
-	 * TX_ERROR is set when a TX_ABORT condition occurs in the MAC->exists  
-	 * only in the 802.3 MAC and happens when 16 collisions occur during a TX 
+	 * RX_ERROR is set when a packet is dropped due to no memory resources on
+	 * the card or when a RCV_ERR occurs.
+	 * TX_ERROR is set when a TX_ABORT condition occurs in the MAC->exists
+	 * only in the 802.3 MAC and happens when 16 collisions occur during a TX
 	 */
 	if (val & (HP100_TX_ERROR | HP100_RX_ERROR)) {
 #ifdef HP100_DEBUG_IRQ
@@ -2275,20 +2275,20 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		}
 	}
 
-	/* 
-	 * RX_PDA_ZERO is set when the PDA count goes from non-zero to zero. 
+	/*
+	 * RX_PDA_ZERO is set when the PDA count goes from non-zero to zero.
 	 */
 	if ((lp->mode == 1) && (val & (HP100_RX_PDA_ZERO)))
 		hp100_rxfill(dev);
 
-	/* 
-	 * HP100_TX_COMPLETE interrupt occurs when packet transmitted on wire 
-	 * is completed 
+	/*
+	 * HP100_TX_COMPLETE interrupt occurs when packet transmitted on wire
+	 * is completed
 	 */
 	if ((lp->mode == 1) && (val & (HP100_TX_COMPLETE)))
 		hp100_clean_txring(dev);
 
-	/* 
+	/*
 	 * MISC_ERROR is set when either the LAN link goes down or a detected
 	 * bus error occurs.
 	 */
@@ -2471,12 +2471,12 @@ static int hp100_sense_lan(struct net_device *dev)
 
 	/* Those cards don't have a 100 Mbit connector */
 	if ( !strcmp(lp->id, "HWP1920")  ||
-	     (lp->pci_dev && 
-	      lp->pci_dev->vendor == PCI_VENDOR_ID && 
+	     (lp->pci_dev &&
+	      lp->pci_dev->vendor == PCI_VENDOR_ID &&
 	      (lp->pci_dev->device == PCI_DEVICE_ID_HP_J2970A ||
 	       lp->pci_dev->device == PCI_DEVICE_ID_HP_J2973A)))
 		return HP100_LAN_ERR;
-	
+
 	if (val_VG & HP100_LINK_CABLE_ST)	/* Can hear the HUBs tone. */
 		return HP100_LAN_100;
 	return HP100_LAN_ERR;
@@ -2822,8 +2822,8 @@ static void cleanup_dev(struct net_device *d)
 	release_region(d->base_addr, HP100_REGION_SIZE);
 
 	if (p->mode == 1)	/* busmaster */
-		pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f, 
-				    p->page_vaddr_algn, 
+		pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f,
+				    p->page_vaddr_algn,
 				    virt_to_whatever(d, p->page_vaddr_algn));
 	if (p->mem_ptr_virt)
 		iounmap(p->mem_ptr_virt);
@@ -2849,7 +2849,7 @@ static int __init hp100_eisa_probe (struct device *gendev)
 		goto out1;
 
 #ifdef HP100_DEBUG
-	printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name, 
+	printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name,
 	       dev->base_addr);
 #endif
 	gendev->driver_data = dev;
@@ -2913,12 +2913,12 @@ static int __devinit hp100_pci_probe (struct pci_dev *pdev,
 		pci_command |= PCI_COMMAND_MASTER;
 		pci_write_config_word(pdev, PCI_COMMAND, pci_command);
 	}
-	
+
 	ioaddr = pci_resource_start(pdev, 0);
 	err = hp100_probe1(dev, ioaddr, HP100_BUS_PCI, pdev);
-	if (err) 
+	if (err)
 		goto out1;
-	
+
 #ifdef HP100_DEBUG
 	printk("hp100: %s: PCI adapter found at 0x%x\n", dev->name, ioaddr);
 #endif
@@ -3003,7 +3003,7 @@ static int __init hp100_isa_init(void)
 	return cards > 0 ? 0 : -ENODEV;
 }
 
-static void __exit hp100_isa_cleanup(void) 
+static void __exit hp100_isa_cleanup(void)
 {
 	int i;
 
@@ -3027,12 +3027,12 @@ static int __init hp100_module_init(void)
 		goto out;
 #ifdef CONFIG_EISA
 	err = eisa_driver_register(&hp100_eisa_driver);
-	if (err && err != -ENODEV) 
+	if (err && err != -ENODEV)
 		goto out2;
 #endif
 #ifdef CONFIG_PCI
 	err = pci_module_init(&hp100_pci_driver);
-	if (err && err != -ENODEV) 
+	if (err && err != -ENODEV)
 		goto out3;
 #endif
  out: