diff options
| author | Alexander Kochetkov <al.kochet@gmail.com> | 2014-11-13 04:26:20 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2014-11-13 22:37:53 +0300 |
| commit | 6ff53fd37175e35dc4f70b0e8f48b28338fbee29 (patch) | |
| tree | 0e322b0185bec1710b17092092de85d3ebe19b3f /drivers/net/ethernet | |
| parent | 242bcd5ba1dcea802c0ad03344f626a727212399 (diff) | |
| download | linux-6ff53fd37175e35dc4f70b0e8f48b28338fbee29.tar.xz | |
net/smsc911x: Fix delays in the PHY enable/disable routines
Increased delay in the smsc911x_phy_disable_energy_detect (from 1ms to 2ms).
Dropped delays in the smsc911x_phy_enable_energy_detect (100ms and 1ms).
The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221).
I saw problems with soft reset due to wrong udelay timings.
After I fixed udelay, I measured the time needed to bring integrated PHY
from power-down to operational mode (the time beetween clearing EDPWRDOWN
bit and soft reset complete event). I got 1ms (measured using ktime_get).
The value is equal to the current value (1ms) used in the
smsc911x_phy_disable_energy_detect. It is near the upper bound and in order
to avoid rare soft reset faults it is doubled (2ms).
I don't know official timing for bringing up integrated PHY as specs doesn't
clarify this (or may be I didn't found).
It looks safe to drop delays before and after setting EDPWRDOWN bit
(enable PHY power-down mode). I didn't saw any regressions with the patch.
The patch was reviewed by Steve Glendinning and Microchip Team.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Acked-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/smsc/smsc911x.c | 7 |
1 files changed, 2 insertions, 5 deletions
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 1e1f6194cb37..c3bf17f89b05 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1366,8 +1366,8 @@ static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata) SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); return rc; } - - mdelay(1); + /* Allow PHY to wakeup */ + mdelay(2); } return 0; @@ -1389,7 +1389,6 @@ static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata) /* Only enable if energy detect mode is already disabled */ if (!(rc & MII_LAN83C185_EDPWRDOWN)) { - mdelay(100); /* Enable energy detect mode for this SMSC Transceivers */ rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, rc | MII_LAN83C185_EDPWRDOWN); @@ -1398,8 +1397,6 @@ static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata) SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); return rc; } - - mdelay(1); } return 0; } |