summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
authorMasahiro Yamada <masahiroy@kernel.org>2020-06-13 19:50:22 +0300
committerMasahiro Yamada <masahiroy@kernel.org>2020-06-13 19:57:21 +0300
commita7f7f6248d9740d710fd6bd190293fe5e16410ac (patch)
treedc59d36a552f7e25f909f5b2edc83f96c013befa /drivers/net/ethernet
parente4a42c82e943b97ce124539fcd7a47445b43fa0d (diff)
downloadlinux-a7f7f6248d9740d710fd6bd190293fe5e16410ac.tar.xz
treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/3com/Kconfig14
-rw-r--r--drivers/net/ethernet/8390/Kconfig32
-rw-r--r--drivers/net/ethernet/Kconfig18
-rw-r--r--drivers/net/ethernet/adaptec/Kconfig4
-rw-r--r--drivers/net/ethernet/aeroflex/Kconfig2
-rw-r--r--drivers/net/ethernet/agere/Kconfig4
-rw-r--r--drivers/net/ethernet/alacritech/Kconfig4
-rw-r--r--drivers/net/ethernet/allwinner/Kconfig4
-rw-r--r--drivers/net/ethernet/alteon/Kconfig6
-rw-r--r--drivers/net/ethernet/altera/Kconfig2
-rw-r--r--drivers/net/ethernet/amazon/Kconfig4
-rw-r--r--drivers/net/ethernet/amd/Kconfig34
-rw-r--r--drivers/net/ethernet/apple/Kconfig10
-rw-r--r--drivers/net/ethernet/aquantia/Kconfig4
-rw-r--r--drivers/net/ethernet/arc/Kconfig6
-rw-r--r--drivers/net/ethernet/atheros/Kconfig10
-rw-r--r--drivers/net/ethernet/broadcom/Kconfig32
-rw-r--r--drivers/net/ethernet/brocade/Kconfig2
-rw-r--r--drivers/net/ethernet/brocade/bna/Kconfig2
-rw-r--r--drivers/net/ethernet/cadence/Kconfig8
-rw-r--r--drivers/net/ethernet/cavium/Kconfig16
-rw-r--r--drivers/net/ethernet/chelsio/Kconfig18
-rw-r--r--drivers/net/ethernet/cirrus/Kconfig6
-rw-r--r--drivers/net/ethernet/cisco/Kconfig2
-rw-r--r--drivers/net/ethernet/cisco/enic/Kconfig2
-rw-r--r--drivers/net/ethernet/cortina/Kconfig4
-rw-r--r--drivers/net/ethernet/davicom/Kconfig4
-rw-r--r--drivers/net/ethernet/dec/Kconfig2
-rw-r--r--drivers/net/ethernet/dec/tulip/Kconfig26
-rw-r--r--drivers/net/ethernet/dlink/Kconfig8
-rw-r--r--drivers/net/ethernet/emulex/Kconfig2
-rw-r--r--drivers/net/ethernet/ezchip/Kconfig4
-rw-r--r--drivers/net/ethernet/faraday/Kconfig6
-rw-r--r--drivers/net/ethernet/freescale/Kconfig16
-rw-r--r--drivers/net/ethernet/freescale/dpaa/Kconfig2
-rw-r--r--drivers/net/ethernet/fujitsu/Kconfig4
-rw-r--r--drivers/net/ethernet/hisilicon/Kconfig22
-rw-r--r--drivers/net/ethernet/huawei/Kconfig2
-rw-r--r--drivers/net/ethernet/huawei/hinic/Kconfig2
-rw-r--r--drivers/net/ethernet/i825xx/Kconfig14
-rw-r--r--drivers/net/ethernet/ibm/Kconfig8
-rw-r--r--drivers/net/ethernet/intel/Kconfig46
-rw-r--r--drivers/net/ethernet/marvell/Kconfig24
-rw-r--r--drivers/net/ethernet/marvell/octeontx2/Kconfig2
-rw-r--r--drivers/net/ethernet/mediatek/Kconfig4
-rw-r--r--drivers/net/ethernet/mellanox/Kconfig2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/Kconfig8
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/Kconfig18
-rw-r--r--drivers/net/ethernet/mellanox/mlxfw/Kconfig2
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/Kconfig20
-rw-r--r--drivers/net/ethernet/micrel/Kconfig10
-rw-r--r--drivers/net/ethernet/microchip/Kconfig10
-rw-r--r--drivers/net/ethernet/moxa/Kconfig4
-rw-r--r--drivers/net/ethernet/myricom/Kconfig6
-rw-r--r--drivers/net/ethernet/natsemi/Kconfig12
-rw-r--r--drivers/net/ethernet/neterion/Kconfig8
-rw-r--r--drivers/net/ethernet/netronome/Kconfig8
-rw-r--r--drivers/net/ethernet/nvidia/Kconfig4
-rw-r--r--drivers/net/ethernet/oki-semi/Kconfig2
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/Kconfig2
-rw-r--r--drivers/net/ethernet/packetengines/Kconfig6
-rw-r--r--drivers/net/ethernet/pasemi/Kconfig4
-rw-r--r--drivers/net/ethernet/qlogic/Kconfig20
-rw-r--r--drivers/net/ethernet/qualcomm/Kconfig8
-rw-r--r--drivers/net/ethernet/qualcomm/rmnet/Kconfig2
-rw-r--r--drivers/net/ethernet/rdc/Kconfig4
-rw-r--r--drivers/net/ethernet/realtek/Kconfig18
-rw-r--r--drivers/net/ethernet/renesas/Kconfig4
-rw-r--r--drivers/net/ethernet/rocker/Kconfig4
-rw-r--r--drivers/net/ethernet/samsung/Kconfig4
-rw-r--r--drivers/net/ethernet/seeq/Kconfig6
-rw-r--r--drivers/net/ethernet/sfc/Kconfig12
-rw-r--r--drivers/net/ethernet/sfc/falcon/Kconfig4
-rw-r--r--drivers/net/ethernet/sgi/Kconfig4
-rw-r--r--drivers/net/ethernet/silan/Kconfig4
-rw-r--r--drivers/net/ethernet/sis/Kconfig6
-rw-r--r--drivers/net/ethernet/smsc/Kconfig18
-rw-r--r--drivers/net/ethernet/socionext/Kconfig6
-rw-r--r--drivers/net/ethernet/stmicro/Kconfig2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Kconfig24
-rw-r--r--drivers/net/ethernet/sun/Kconfig18
-rw-r--r--drivers/net/ethernet/synopsys/Kconfig6
-rw-r--r--drivers/net/ethernet/tehuti/Kconfig4
-rw-r--r--drivers/net/ethernet/ti/Kconfig20
-rw-r--r--drivers/net/ethernet/toshiba/Kconfig8
-rw-r--r--drivers/net/ethernet/tundra/Kconfig4
-rw-r--r--drivers/net/ethernet/via/Kconfig8
-rw-r--r--drivers/net/ethernet/wiznet/Kconfig14
-rw-r--r--drivers/net/ethernet/xilinx/Kconfig8
-rw-r--r--drivers/net/ethernet/xircom/Kconfig4
-rw-r--r--drivers/net/ethernet/xscale/Kconfig4
91 files changed, 411 insertions, 411 deletions
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
index 7cc259893cb9..074b0974769c 100644
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_3COM
bool "3Com devices"
default y
depends on ISA || EISA || PCI || PCMCIA
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_3COM
config EL3
tristate "3c509/3c579 \"EtherLink III\" support"
depends on (ISA || EISA)
- ---help---
+ help
If you have a network (Ethernet) card belonging to the 3Com
EtherLinkIII series, say Y here.
@@ -34,7 +34,7 @@ config EL3
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
depends on ISA && ISA_DMA_API && !PPC32
- ---help---
+ help
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y here.
@@ -44,7 +44,7 @@ config 3C515
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
depends on PCMCIA
- ---help---
+ help
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
@@ -54,7 +54,7 @@ config PCMCIA_3C574
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
depends on PCMCIA
- ---help---
+ help
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
@@ -65,7 +65,7 @@ config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on (PCI || EISA) && HAS_IOPORT_MAP
select MII
- ---help---
+ help
This option enables driver support for a large number of 10Mbps and
10/100Mbps EISA, PCI and Cardbus 3Com network cards:
@@ -86,7 +86,7 @@ config TYPHOON
tristate "3cr990 series \"Typhoon\" support"
depends on PCI
select CRC32
- ---help---
+ help
This option enables driver support for the 3cr990 series of cards:
3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a9478577b495..9f4b302fd2ce 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_8390
bool "National Semiconductor 8390 devices"
default y
depends on NET_VENDOR_NATSEMI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_8390
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
depends on PCMCIA
- ---help---
+ help
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
nearly NE2000 compatible but need a separate driver due to a few
@@ -35,7 +35,7 @@ config AX88796
select CRC32
select PHYLIB
select MDIO_BITBANG
- ---help---
+ help
AX88796 driver, using platform bus to provide
chip detection and resources
@@ -43,7 +43,7 @@ config AX88796_93CX6
bool "ASIX AX88796 external 93CX6 eeprom support"
depends on AX88796
select EEPROM_93CX6
- ---help---
+ help
Select this if your platform comes with an external 93CX6 eeprom.
config XSURF100
@@ -63,7 +63,7 @@ config HYDRA
tristate "Hydra support"
depends on ZORRO
select CRC32
- ---help---
+ help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the module
@@ -73,7 +73,7 @@ config ARM_ETHERH
tristate "I-cubed EtherH/ANT EtherM support"
depends on ARM && ARCH_ACORN
select CRC32
- ---help---
+ help
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
@@ -81,7 +81,7 @@ config MAC8390
tristate "Macintosh NS 8390 based ethernet cards"
depends on MAC
select CRC32
- ---help---
+ help
If you want to include a driver to support Nubus or LC-PDS
Ethernet cards using an NS8390 chipset or its equivalent, say Y.
@@ -89,7 +89,7 @@ config MCF8390
tristate "ColdFire NS8390 based Ethernet support"
depends on COLDFIRE
select CRC32
- ---help---
+ help
This driver is for Ethernet devices using an NS8390-compatible
chipset on many common ColdFire CPU based boards. Many of the older
Freescale dev boards use this, and some other common boards like
@@ -103,7 +103,7 @@ config NE2000
tristate "NE2000/NE1000 support"
depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
select CRC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
Many Ethernet cards without a specific driver are compatible with
the NE2000.
@@ -118,7 +118,7 @@ config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for NE2000 compatible PCI cards. It will not work
with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
support" below). If you have a PCI NE2000 network (Ethernet) card,
@@ -136,7 +136,7 @@ config APNE
tristate "PCMCIA NE2000 support"
depends on AMIGA_PCMCIA
select CRC32
- ---help---
+ help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
@@ -147,7 +147,7 @@ config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
depends on PCMCIA
select CRC32
- ---help---
+ help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
@@ -158,7 +158,7 @@ config STNIC
tristate "National DP83902AV support"
depends on SUPERH
select CRC32
- ---help---
+ help
Support for cards based on the National Semiconductor DP83902AV
ST-NIC Serial Network Interface Controller for Twisted Pair. This
is a 10Mbit/sec Ethernet controller. Product overview and specs at
@@ -170,7 +170,7 @@ config ULTRA
tristate "SMC Ultra support"
depends on ISA
select CRC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
Important: There have been many reports that, with some motherboards
@@ -187,7 +187,7 @@ config WD80x3
tristate "WD80*3 support"
depends on ISA
select CRC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
To compile this driver as a module, choose M here. The module
@@ -197,7 +197,7 @@ config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
depends on ZORRO
select CRC32
- ---help---
+ help
This driver is for Zorro Ethernet cards using an NS8390-compatible
chipset, like the Village Tronic Ariadne II and the Individual
Computers X-Surf Ethernet cards. If you have such a card, say Y.
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 4ded81b27d0a..de50e8b9e656 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -7,7 +7,7 @@ menuconfig ETHERNET
bool "Ethernet driver support"
depends on NET
default y
- ---help---
+ help
This section contains all the Ethernet device drivers.
if ETHERNET
@@ -48,7 +48,7 @@ config CX_ECAT
tristate "Beckhoff CX5020 EtherCAT master support"
depends on PCI
depends on X86 || COMPILE_TEST
- ---help---
+ help
Driver for EtherCAT master module located on CCAT FPGA
that can be found on Beckhoff CX5020, and possibly other of CX
Beckhoff CX series industrial PCs.
@@ -62,7 +62,7 @@ config DNET
tristate "Dave ethernet support (DNET)"
depends on HAS_IOMEM
select PHYLIB
- ---help---
+ help
The Dave ethernet interface (DNET) is found on Qong Board FPGA.
Say Y to include support for the DNET chip.
@@ -89,7 +89,7 @@ config JME
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the PCI-Express gigabit ethernet adapters
based on JMicron JMC250 chipset.
@@ -99,20 +99,20 @@ config JME
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on MIKROTIK_RB532
- ---help---
+ help
If you have a Mikrotik RouterBoard 500 or IDT RC32434
based system say Y. Otherwise say N.
config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
- ---help---
+ help
Support for the MII0 inside the Lantiq SoC
config LANTIQ_XRX200
tristate "Lantiq / Intel xRX200 PMAC network driver"
depends on SOC_TYPE_XWAY
- ---help---
+ help
Support for the PMAC of the Gigabit switch (GSWIP) inside the
Lantiq / Intel VRX200 VDSL SoC
@@ -130,7 +130,7 @@ config FEALNX
depends on PCI
select CRC32
select MII
- ---help---
+ help
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
cards. <http://www.myson.com.tw/>
@@ -150,7 +150,7 @@ config ETHOC
select PHYLIB
select CRC32
select BITREVERSE
- ---help---
+ help
Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
source "drivers/net/ethernet/packetengines/Kconfig"
diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig
index 86e02da4f993..c96edc2e582f 100644
--- a/drivers/net/ethernet/adaptec/Kconfig
+++ b/drivers/net/ethernet/adaptec/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_ADAPTEC
bool "Adaptec devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config ADAPTEC_STARFIRE
depends on PCI
select CRC32
select MII
- ---help---
+ help
Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
adapter. The DuraLAN chip is used on the 64 bit PCI boards from
Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
diff --git a/drivers/net/ethernet/aeroflex/Kconfig b/drivers/net/ethernet/aeroflex/Kconfig
index 2fa0a317266b..ea4be67f787b 100644
--- a/drivers/net/ethernet/aeroflex/Kconfig
+++ b/drivers/net/ethernet/aeroflex/Kconfig
@@ -8,5 +8,5 @@ config GRETH
depends on SPARC
select PHYLIB
select CRC32
- ---help---
+ help
Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
diff --git a/drivers/net/ethernet/agere/Kconfig b/drivers/net/ethernet/agere/Kconfig
index 084c7190ce2f..d92516ae59cc 100644
--- a/drivers/net/ethernet/agere/Kconfig
+++ b/drivers/net/ethernet/agere/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_AGERE
bool "Agere devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config ET131X
tristate "Agere ET-1310 Gigabit Ethernet support"
depends on PCI
select PHYLIB
- ---help---
+ help
This driver supports Agere ET-1310 ethernet adapters.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/alacritech/Kconfig b/drivers/net/ethernet/alacritech/Kconfig
index 212f92c8e6a9..5f285e18faf7 100644
--- a/drivers/net/ethernet/alacritech/Kconfig
+++ b/drivers/net/ethernet/alacritech/Kconfig
@@ -2,7 +2,7 @@
config NET_VENDOR_ALACRITECH
bool "Alacritech devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -16,7 +16,7 @@ config SLICOSS
tristate "Alacritech Slicoss support"
depends on PCI
select CRC32
- ---help---
+ help
This driver supports Gigabit Ethernet adapters based on the
Session Layer Interface (SLIC) technology by Alacritech.
diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig
index 264a482ec31d..3e81059f8693 100644
--- a/drivers/net/ethernet/allwinner/Kconfig
+++ b/drivers/net/ethernet/allwinner/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_ALLWINNER
default y
depends on ARCH_SUNXI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this
class, say Y here.
@@ -28,7 +28,7 @@ config SUN4I_EMAC
select MII
select PHYLIB
select MDIO_SUN4I
- ---help---
+ help
Support for Allwinner A10 EMAC ethernet driver.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/alteon/Kconfig b/drivers/net/ethernet/alteon/Kconfig
index c3f7067d2d10..cfe1f3159d61 100644
--- a/drivers/net/ethernet/alteon/Kconfig
+++ b/drivers/net/ethernet/alteon/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_ALTEON
bool "Alteon devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_ALTEON
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
depends on PCI
- ---help---
+ help
Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
adapter. The driver allows for using the Jumbo Frame option (9000
@@ -34,7 +34,7 @@ config ACENIC
config ACENIC_OMIT_TIGON_I
bool "Omit support for old Tigon I based AceNICs"
depends on ACENIC
- ---help---
+ help
Say Y here if you only have Tigon II based AceNICs and want to leave
out support for the older Tigon I based cards which are no longer
being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
diff --git a/drivers/net/ethernet/altera/Kconfig b/drivers/net/ethernet/altera/Kconfig
index 2690c398d2b2..914e56b91467 100644
--- a/drivers/net/ethernet/altera/Kconfig
+++ b/drivers/net/ethernet/altera/Kconfig
@@ -3,7 +3,7 @@ config ALTERA_TSE
tristate "Altera Triple-Speed Ethernet MAC support"
depends on HAS_DMA
select PHYLIB
- ---help---
+ help
This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/amazon/Kconfig b/drivers/net/ethernet/amazon/Kconfig
index cca72a75f551..c37fa393b99e 100644
--- a/drivers/net/ethernet/amazon/Kconfig
+++ b/drivers/net/ethernet/amazon/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_AMAZON
bool "Amazon Devices"
default y
- ---help---
+ help
If you have a network (Ethernet) device belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config ENA_ETHERNET
tristate "Elastic Network Adapter (ENA) support"
depends on PCI_MSI && !CPU_BIG_ENDIAN
select DIMLIB
- ---help---
+ help
This driver supports Elastic Network Adapter (ENA)"
To compile this driver as a module, choose M here.
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index 9f965cdfff5c..db7d956a9c9b 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -9,7 +9,7 @@ config NET_VENDOR_AMD
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
(ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
- ---help---
+ help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -24,7 +24,7 @@ config A2065
tristate "A2065 support"
depends on ZORRO
select CRC32
- ---help---
+ help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
@@ -36,7 +36,7 @@ config AMD8111_ETH
depends on PCI
select CRC32
select MII
- ---help---
+ help
If you have an AMD 8111-based PCI LANCE ethernet card,
answer Y here.
@@ -46,7 +46,7 @@ config AMD8111_ETH
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
Some LinkSys cards are of this type.
@@ -58,7 +58,7 @@ config PCNET32
depends on PCI
select CRC32
select MII
- ---help---
+ help
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
answer Y here.
@@ -68,7 +68,7 @@ config PCNET32
config ARIADNE
tristate "Ariadne support"
depends on ZORRO
- ---help---
+ help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
@@ -79,14 +79,14 @@ config ARM_AM79C961A
bool "ARM EBSA110 AM79C961A support"
depends on ARM && ARCH_EBSA110
select CRC32
- ---help---
+ help
If you wish to compile a kernel for the EBSA-110, then you should
always answer Y to this.
config ATARILANCE
tristate "Atari LANCE support"
depends on ATARI
- ---help---
+ help
Say Y to include support for several Atari Ethernet adapters based
on the AMD LANCE chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
@@ -95,7 +95,7 @@ config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on MACH_DECSTATION
select CRC32
- ---help---
+ help
This driver is for the series of Ethernet controllers produced by
DEC (now Compaq) based on the AMD LANCE chipset, including the
DEPCA series. (This chipset is better known via the NE2100 cards.)
@@ -104,7 +104,7 @@ config HPLANCE
tristate "HP on-board LANCE support"
depends on DIO
select CRC32
- ---help---
+ help
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
@@ -113,7 +113,7 @@ config MIPS_AU1X00_ENET
depends on MIPS_ALCHEMY
select PHYLIB
select CRC32
- ---help---
+ help
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
@@ -121,7 +121,7 @@ config MVME147_NET
tristate "MVME147 (LANCE) Ethernet support"
depends on MVME147
select CRC32
- ---help---
+ help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel.
@@ -140,7 +140,7 @@ config PCMCIA_NMCLAN
config NI65
tristate "NI6510 support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
To compile this driver as a module, choose M here. The module
@@ -149,7 +149,7 @@ config NI65
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on (SUN3 || SUN3X)
- ---help---
+ help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
@@ -163,7 +163,7 @@ config SUNLANCE
tristate "Sun LANCE support"
depends on SBUS
select CRC32
- ---help---
+ help
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
cards are based on the AMD LANCE chipset, which is better known
@@ -181,7 +181,7 @@ config AMD_XGBE
select PHYLIB
select AMD_XGBE_HAVE_ECC if X86
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports the AMD 10GbE Ethernet device found on an
AMD SoC.
@@ -192,7 +192,7 @@ config AMD_XGBE_DCB
bool "Data Center Bridging (DCB) support"
default n
depends on AMD_XGBE && DCB
- ---help---
+ help
Say Y here to enable Data Center Bridging (DCB) support in the
driver.
diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig
index f78b9c841296..a4176d2ecec6 100644
--- a/drivers/net/ethernet/apple/Kconfig
+++ b/drivers/net/ethernet/apple/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_APPLE
bool "Apple devices"
default y
depends on (PPC_PMAC && PPC32) || MAC
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
select CRC32
- ---help---
+ help
Power Macintoshes and clones with Ethernet built-in on the
motherboard will usually use a MACE (Medium Access Control for
Ethernet) interface. Say Y to include support for the MACE chip.
@@ -32,7 +32,7 @@ config MACE
config MACE_AAUI_PORT
bool "Use AAUI port instead of TP by default"
depends on MACE
- ---help---
+ help
Some Apple machines (notably the Apple Network Server) which use the
MACE ethernet chip have an Apple AUI port (small 15-pin connector),
instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
@@ -44,7 +44,7 @@ config BMAC
tristate "BMAC (G3 ethernet) support"
depends on PPC_PMAC && PPC32
select CRC32
- ---help---
+ help
Say Y for support of BMAC Ethernet interfaces. These are used on G3
computers.
@@ -55,7 +55,7 @@ config MACMACE
tristate "Macintosh (AV) onboard MACE ethernet"
depends on MAC
select CRC32
- ---help---
+ help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
the 660AV and 840AV Macintosh. If you have one of these Macintoshes
say Y here.
diff --git a/drivers/net/ethernet/aquantia/Kconfig b/drivers/net/ethernet/aquantia/Kconfig
index 76a44b2546ff..efb33c078a3c 100644
--- a/drivers/net/ethernet/aquantia/Kconfig
+++ b/drivers/net/ethernet/aquantia/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_AQUANTIA
bool "aQuantia devices"
default y
- ---help---
+ help
Set this to y if you have an Ethernet network cards that uses the aQuantia
AQC107/AQC108 chipset.
@@ -21,7 +21,7 @@ config AQTION
depends on PCI
depends on X86_64 || ARM64 || COMPILE_TEST
depends on MACSEC || MACSEC=n
- ---help---
+ help
This enables the support for the aQuantia AQtion(tm) Ethernet card.
endif # NET_VENDOR_AQUANTIA
diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig
index 45c663d8b9aa..37a41773dd43 100644
--- a/drivers/net/ethernet/arc/Kconfig
+++ b/drivers/net/ethernet/arc/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_ARC
bool "ARC devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -27,7 +27,7 @@ config ARC_EMAC
select ARC_EMAC_CORE
depends on OF_IRQ && OF_NET
depends on ARC || COMPILE_TEST
- ---help---
+ help
On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x
non-standard on-chip ethernet device ARC EMAC 10/100 is used.
Say Y here if you have such a board. If unsure, say N.
@@ -37,7 +37,7 @@ config EMAC_ROCKCHIP
select ARC_EMAC_CORE
depends on OF_IRQ && OF_NET && REGULATOR
depends on ARCH_ROCKCHIP || COMPILE_TEST
- ---help---
+ help
Support for Rockchip RK3036/RK3066/RK3188 EMAC ethernet controllers.
This selects Rockchip SoC glue layer support for the
emac device driver. This driver is used for RK3036/RK3066/RK3188
diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig
index 2720bde5034e..fb803bf92ded 100644
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_ATHEROS
bool "Atheros devices"
default y
depends on (PCI || ATH79)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -30,7 +30,7 @@ config ATL2
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the Atheros L2 fast ethernet adapter.
To compile this driver as a module, choose M here. The module
@@ -41,7 +41,7 @@ config ATL1
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the Atheros/Attansic L1 gigabit ethernet
adapter.
@@ -53,7 +53,7 @@ config ATL1E
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the Atheros L1E gigabit ethernet adapter.
To compile this driver as a module, choose M here. The module
@@ -64,7 +64,7 @@ config ATL1C
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the Atheros L1C gigabit ethernet adapter.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 2a69c0d06f3c..7fb42f388d59 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_BROADCOM
default y
depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
SIBYTE_SB1xxx_SOC
- ---help---
+ help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -25,7 +25,7 @@ config B44
select SSB
select MII
select PHYLIB
- ---help---
+ help
If you have a network (Ethernet) controller of this type, say Y
or M here.
@@ -79,7 +79,7 @@ config BNX2
depends on PCI
select CRC32
select FW_LOADER
- ---help---
+ help
This driver supports QLogic bnx2 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
@@ -90,7 +90,7 @@ config CNIC
depends on PCI && (IPV6 || IPV6=n)
select BNX2
select UIO
- ---help---
+ help
This driver supports offload features of QLogic bnx2 gigabit
Ethernet cards.
@@ -101,7 +101,7 @@ config SB1250_MAC
tristate "SB1250 Gigabit Ethernet support"
depends on SIBYTE_SB1xxx_SOC
select PHYLIB
- ---help---
+ help
This driver supports Gigabit Ethernet interfaces based on the
Broadcom SiByte family of System-On-a-Chip parts. They include
the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
@@ -115,7 +115,7 @@ config TIGON3
depends on PCI
select PHYLIB
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
@@ -125,7 +125,7 @@ config TIGON3_HWMON
bool "Broadcom Tigon3 HWMON support"
default y
depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose the thermal sensor on Tigon3 devices.
config BNX2X
@@ -136,7 +136,7 @@ config BNX2X
select ZLIB_INFLATE
select LIBCRC32C
select MDIO
- ---help---
+ help
This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2x. This is recommended.
@@ -145,7 +145,7 @@ config BNX2X_SRIOV
bool "Broadcom 578xx and 57712 SR-IOV support"
depends on BNX2X && PCI_IOV
default y
- ---help---
+ help
This configuration parameter enables Single Root Input Output
Virtualization support in the 578xx and 57712 products. This
allows for virtual function acceleration in virtual environments.
@@ -164,7 +164,7 @@ config BGMAC_BCMA
select BGMAC
select PHYLIB
select FIXED_PHY
- ---help---
+ help
This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
They can be found on BCM47xx SoCs and provide gigabit ethernet.
In case of using this driver on BCM4706 it's also requires to enable
@@ -178,7 +178,7 @@ config BGMAC_PLATFORM
select PHYLIB
select FIXED_PHY
default ARCH_BCM_IPROC
- ---help---
+ help
Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
controller through the generic platform interface
@@ -203,7 +203,7 @@ config BNXT
select NET_DEVLINK
select PAGE_POOL
select DIMLIB
- ---help---
+ help
This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
Ethernet cards. To compile this driver as a module, choose M here:
the module will be called bnxt_en. This is recommended.
@@ -212,7 +212,7 @@ config BNXT_SRIOV
bool "Broadcom NetXtreme-C/E SR-IOV support"
depends on BNXT && PCI_IOV
default y
- ---help---
+ help
This configuration parameter enables Single Root Input Output
Virtualization support in the NetXtreme-C/E products. This
allows for virtual function acceleration in virtual environments.
@@ -221,7 +221,7 @@ config BNXT_FLOWER_OFFLOAD
bool "TC Flower offload support for NetXtreme-C/E"
depends on BNXT
default y
- ---help---
+ help
This configuration parameter enables TC Flower packet classifier
offload for eswitch. This option enables SR-IOV switchdev eswitch
offload.
@@ -230,7 +230,7 @@ config BNXT_DCB
bool "Data Center Bridging (DCB) Support"
default n
depends on BNXT && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
@@ -240,7 +240,7 @@ config BNXT_HWMON
bool "Broadcom NetXtreme-C/E HWMON support"
default y
depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
devices, via the hwmon sysfs interface.
diff --git a/drivers/net/ethernet/brocade/Kconfig b/drivers/net/ethernet/brocade/Kconfig
index d4564c7a279c..fb4c3cdf7233 100644
--- a/drivers/net/ethernet/brocade/Kconfig
+++ b/drivers/net/ethernet/brocade/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_BROCADE
bool "QLogic BR-series devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/brocade/bna/Kconfig b/drivers/net/ethernet/brocade/bna/Kconfig
index b124a628f86a..0a48ad93ed6c 100644
--- a/drivers/net/ethernet/brocade/bna/Kconfig
+++ b/drivers/net/ethernet/brocade/bna/Kconfig
@@ -6,7 +6,7 @@
config BNA
tristate "QLogic BR-series 1010/1020/1860 10Gb Ethernet Driver support"
depends on PCI
- ---help---
+ help
This driver supports QLogic BR-series 1010/1020/1860 10Gb CEE capable
Ethernet cards.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 2c4c12b03502..85858163bac5 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_CADENCE
bool "Cadence devices"
depends on HAS_IOMEM
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
If unsure, say Y.
@@ -23,7 +23,7 @@ config MACB
tristate "Cadence MACB/GEM support"
depends on HAS_DMA && COMMON_CLK
select PHYLINK
- ---help---
+ help
The Cadence MACB ethernet interface is found on many Atmel AT32 and
AT91 parts. This driver also supports the Cadence GEM (Gigabit
Ethernet MAC found in some ARM SoC devices). Say Y to include
@@ -37,13 +37,13 @@ config MACB_USE_HWSTAMP
depends on MACB
depends on PTP_1588_CLOCK
default y
- ---help---
+ help
Enable IEEE 1588 Precision Time Protocol (PTP) support for MACB.
config MACB_PCI
tristate "Cadence PCI MACB/GEM support"
depends on MACB && PCI
- ---help---
+ help
This is PCI wrapper for MACB driver.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/net/ethernet/cavium/Kconfig b/drivers/net/ethernet/cavium/Kconfig
index 4520e7ee00fe..4875cdae622e 100644
--- a/drivers/net/ethernet/cavium/Kconfig
+++ b/drivers/net/ethernet/cavium/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_CAVIUM
bool "Cavium ethernet drivers"
default y
- ---help---
+ help
Select this option if you want enable Cavium network support.
If you have a Cavium SoC or network adapter, say Y.
@@ -17,7 +17,7 @@ config THUNDER_NIC_PF
tristate "Thunder Physical function driver"
depends on 64BIT && PCI
select THUNDER_NIC_BGX
- ---help---
+ help
This driver supports Thunder's NIC physical function.
The NIC provides the controller and DMA engines to
move network traffic to/from the memory. The NIC
@@ -29,7 +29,7 @@ config THUNDER_NIC_VF
tristate "Thunder Virtual function driver"
imply CAVIUM_PTP
depends on 64BIT && PCI
- ---help---
+ help
This driver supports Thunder's NIC virtual function
config THUNDER_NIC_BGX
@@ -38,7 +38,7 @@ config THUNDER_NIC_BGX
select PHYLIB
select MDIO_THUNDER if PCI
select THUNDER_NIC_RGX
- ---help---
+ help
This driver supports programming and controlling of MAC
interface from NIC physical function driver.
@@ -47,7 +47,7 @@ config THUNDER_NIC_RGX
depends on 64BIT && PCI
select PHYLIB
select MDIO_THUNDER if PCI
- ---help---
+ help
This driver supports configuring XCV block of RGX interface
present on CN81XX chip.
@@ -55,7 +55,7 @@ config CAVIUM_PTP
tristate "Cavium PTP coprocessor as PTP clock"
depends on 64BIT && PCI
depends on PTP_1588_CLOCK
- ---help---
+ help
This driver adds support for the Precision Time Protocol Clocks and
Timestamping coprocessor (PTP) found on Cavium processors.
PTP provides timestamping mechanism that is suitable for use in IEEE 1588
@@ -70,7 +70,7 @@ config LIQUIDIO
select FW_LOADER
select LIBCRC32C
select NET_DEVLINK
- ---help---
+ help
This driver supports Cavium LiquidIO Intelligent Server Adapters
based on CN66XX, CN68XX and CN23XX chips.
@@ -92,7 +92,7 @@ config LIQUIDIO_VF
tristate "Cavium LiquidIO VF support"
depends on 64BIT && PCI_MSI
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Cavium LiquidIO Intelligent Server Adapter
based on CN23XX chips.
diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig
index 82cdfa51ce37..b7f43254598f 100644
--- a/drivers/net/ethernet/chelsio/Kconfig
+++ b/drivers/net/ethernet/chelsio/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_CHELSIO
bool "Chelsio devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config CHELSIO_T1
depends on PCI
select CRC32
select MDIO
- ---help---
+ help
This driver supports Chelsio gigabit and 10-gigabit
Ethernet cards. More information about adapter features and
performance tuning is in
@@ -42,7 +42,7 @@ config CHELSIO_T1
config CHELSIO_T1_1G
bool "Chelsio gigabit Ethernet support"
depends on CHELSIO_T1
- ---help---
+ help
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
@@ -51,7 +51,7 @@ config CHELSIO_T3
depends on PCI && INET
select FW_LOADER
select MDIO
- ---help---
+ help
This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
adapters.
@@ -72,7 +72,7 @@ config CHELSIO_T4
select FW_LOADER
select MDIO
select ZLIB_DEFLATE
- ---help---
+ help
This driver supports Chelsio T4, T5 & T6 based gigabit, 10Gb Ethernet
adapter and T5/T6 based 40Gb and T6 based 25Gb, 50Gb and 100Gb
Ethernet adapters.
@@ -92,7 +92,7 @@ config CHELSIO_T4_DCB
bool "Data Center Bridging (DCB) Support for Chelsio T4/T5/T6 cards"
default n
depends on CHELSIO_T4 && DCB
- ---help---
+ help
Enable DCB support through rtNetlink interface.
Say Y here if you want to enable Data Center Bridging (DCB) support
in the driver.
@@ -103,7 +103,7 @@ config CHELSIO_T4_FCOE
bool "Fibre Channel over Ethernet (FCoE) Support for Chelsio T5 cards"
default n
depends on CHELSIO_T4 && CHELSIO_T4_DCB && FCOE
- ---help---
+ help
Enable FCoE offload features.
Say Y here if you want to enable Fibre Channel over Ethernet (FCoE) support
in the driver.
@@ -113,7 +113,7 @@ config CHELSIO_T4_FCOE
config CHELSIO_T4VF
tristate "Chelsio Communications T4/T5/T6 Virtual Function Ethernet support"
depends on PCI
- ---help---
+ help
This driver supports Chelsio T4, T5 & T6 based gigabit, 10Gb Ethernet
adapters and T5/T6 based 40Gb and T6 based 25Gb, 50Gb and 100Gb
Ethernet adapters with PCI-E SR-IOV Virtual Functions.
@@ -131,7 +131,7 @@ config CHELSIO_T4VF
config CHELSIO_LIB
tristate
- ---help---
+ help
Common library for Chelsio drivers.
endif # NET_VENDOR_CHELSIO
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 8d845f5ee0c5..7cf4526596f3 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_CIRRUS
bool "Cirrus devices"
default y
depends on ISA || EISA || ARM || MAC
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config CS89x0
tristate "CS89x0 support"
depends on ISA || EISA || ARM
depends on !PPC32
- ---help---
+ help
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the file
<file:Documentation/networking/device_drivers/cirrus/cs89x0.rst>.
@@ -51,7 +51,7 @@ config EP93XX_ETH
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on MAC
- ---help---
+ help
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y here.
diff --git a/drivers/net/ethernet/cisco/Kconfig b/drivers/net/ethernet/cisco/Kconfig
index ee5b7b3868c7..18c3a0718d6f 100644
--- a/drivers/net/ethernet/cisco/Kconfig
+++ b/drivers/net/ethernet/cisco/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_CISCO
bool "Cisco devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/cisco/enic/Kconfig b/drivers/net/ethernet/cisco/enic/Kconfig
index edaae706a102..ad80c0fa96a6 100644
--- a/drivers/net/ethernet/cisco/enic/Kconfig
+++ b/drivers/net/ethernet/cisco/enic/Kconfig
@@ -6,5 +6,5 @@
config ENIC
tristate "Cisco VIC Ethernet NIC Support"
depends on PCI
- ---help---
+ help
This enables the support for the Cisco VIC Ethernet card.
diff --git a/drivers/net/ethernet/cortina/Kconfig b/drivers/net/ethernet/cortina/Kconfig
index 89bc4579724d..ac8cb5744a87 100644
--- a/drivers/net/ethernet/cortina/Kconfig
+++ b/drivers/net/ethernet/cortina/Kconfig
@@ -4,7 +4,7 @@
config NET_VENDOR_CORTINA
bool "Cortina Gemini devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
@@ -17,7 +17,7 @@ config GEMINI_ETHERNET
depends on HAS_IOMEM
select PHYLIB
select CRC32
- ---help---
+ help
This driver supports StorLink SL351x (Gemini) dual Gigabit Ethernet.
endif # NET_VENDOR_CORTINA
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
index a321a7144fb0..76247103e566 100644
--- a/drivers/net/ethernet/davicom/Kconfig
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -8,7 +8,7 @@ config DM9000
depends on ARM || MIPS || COLDFIRE || NIOS2
select CRC32
select MII
- ---help---
+ help
Support for DM9000 chipset.
To compile this driver as a module, choose M here. The module
@@ -17,7 +17,7 @@ config DM9000
config DM9000_FORCE_SIMPLE_PHY_POLL
bool "Force simple NSR based PHY polling"
depends on DM9000
- ---help---
+ help
This configuration forces the DM9000 to use the NSR's LinkStatus
bit to determine if the link is up or down instead of the more
costly MII PHY reads. Note, this will not work if the chip is
diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig
index df1eeb04d5ea..9e5e5f10bd19 100644
--- a/drivers/net/ethernet/dec/Kconfig
+++ b/drivers/net/ethernet/dec/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_DEC
bool "Digital Equipment devices"
default y
depends on PCI || EISA || CARDBUS
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
index 177f36f4b89d..8afc5942179a 100644
--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -6,7 +6,7 @@
config NET_TULIP
bool "DEC - Tulip devices"
depends on (PCI || EISA || CARDBUS)
- ---help---
+ help
This selects the "Tulip" family of EISA/PCI network cards.
if NET_TULIP
@@ -15,7 +15,7 @@ config DE2104X
tristate "Early DECchip Tulip (dc2104x) PCI support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21040 (Tulip series) chips. Some LinkSys PCI cards are
@@ -32,7 +32,7 @@ config DE2104X_DSL
depends on DE2104X
range 0 31
default 0
- ---help---
+ help
Setting this value allows to align ring buffer descriptors into their
own cache lines. Value of 4 corresponds to the typical 32 byte line
(the descriptor is 16 bytes). This is necessary on systems that lack
@@ -43,7 +43,7 @@ config TULIP
tristate "DECchip Tulip (dc2114x) PCI support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21140 (Tulip series) chips. Some LinkSys PCI cards are
@@ -58,7 +58,7 @@ config TULIP
config TULIP_MWI
bool "New bus configuration"
depends on TULIP
- ---help---
+ help
This configures your Tulip card specifically for the card and
system cache line size type you are using.
@@ -69,7 +69,7 @@ config TULIP_MWI
config TULIP_MMIO
bool "Use PCI shared mem for NIC registers"
depends on TULIP
- ---help---
+ help
Use PCI shared memory for the NIC registers, rather than going through
the Tulip's PIO (programmed I/O ports). Faster, but could produce
obscure bugs if your mainboard has memory controller timing issues.
@@ -78,7 +78,7 @@ config TULIP_MMIO
config TULIP_NAPI
bool "Use RX polling (NAPI)"
depends on TULIP
- ---help---
+ help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
@@ -92,7 +92,7 @@ config TULIP_NAPI
config TULIP_NAPI_HW_MITIGATION
bool "Use Interrupt Mitigation"
depends on TULIP_NAPI
- ---help---
+ help
Use HW to reduce RX interrupts. Not strictly necessary since NAPI
reduces RX interrupts by itself. Interrupt mitigation reduces RX
interrupts even at low levels of traffic at the cost of a small
@@ -109,7 +109,7 @@ config DE4X5
depends on (PCI || EISA)
depends on VIRT_TO_BUS || ALPHA || PPC || SPARC
select CRC32
- ---help---
+ help
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
These include the DE425, DE434, DE435, DE450 and DE500 models. If
you have a network card of this type, say Y. More specific
@@ -124,7 +124,7 @@ config WINBOND_840
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver is for the Winbond W89c840 chip. It also works with
the TX9882 chip on the Compex RL100-ATX board.
More specific information and updates are available from
@@ -134,7 +134,7 @@ config DM9102
tristate "Davicom DM910x/DM980x support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
Davicom (<http://www.davicom.com.tw/>). If you have such a network
(Ethernet) card, say Y. Some information is contained in the file
@@ -147,7 +147,7 @@ config ULI526X
tristate "ULi M526x controller support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for ULi M5261/M5263 10/100M Ethernet Controller
(<http://www.nvidia.com/page/uli_drivers.html>).
@@ -157,7 +157,7 @@ config ULI526X
config PCMCIA_XIRCOM
tristate "Xircom CardBus support"
depends on CARDBUS
- ---help---
+ help
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
index 1362658a3030..0d77f84c8e7b 100644
--- a/drivers/net/ethernet/dlink/Kconfig
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_DLINK
bool "D-Link devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config DL2K
tristate "DL2000/TC902x/IP1000A-based Gigabit Ethernet support"
depends on PCI
select CRC32
- ---help---
+ help
This driver supports DL2000/TC902x/IP1000A-based Gigabit ethernet cards,
which includes
D-Link DGE-550T Gigabit Ethernet Adapter.
@@ -37,7 +37,7 @@ config SUNDANCE
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver is for the Sundance "Alta" chip.
More specific information and updates are available from
<http://www.scyld.com/network/sundance.html>.
@@ -45,7 +45,7 @@ config SUNDANCE
config SUNDANCE_MMIO
bool "Use MMIO instead of PIO"
depends on SUNDANCE
- ---help---
+ help
Enable memory-mapped I/O for interaction with Sundance NIC registers.
Do NOT enable this by default, PIO (enabled when MMIO is disabled)
is known to solve bugs on certain chips.
diff --git a/drivers/net/ethernet/emulex/Kconfig b/drivers/net/ethernet/emulex/Kconfig
index 22c143f2d787..5797a76dc731 100644
--- a/drivers/net/ethernet/emulex/Kconfig
+++ b/drivers/net/ethernet/emulex/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_EMULEX
bool "Emulex devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/ezchip/Kconfig b/drivers/net/ethernet/ezchip/Kconfig
index 6db75fd2f9af..38aa824efb25 100644
--- a/drivers/net/ethernet/ezchip/Kconfig
+++ b/drivers/net/ethernet/ezchip/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_EZCHIP
bool "EZchip devices"
default y
- ---help---
+ help
If you have a network (Ethernet) device belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config EZCHIP_NPS_MANAGEMENT_ENET
tristate "EZchip NPS management enet support"
depends on OF_IRQ && OF_NET
depends on HAS_IOMEM
- ---help---
+ help
Simple LAN device for debug or management purposes.
Device supports interrupts for RX and TX(completion).
Device does not have DMA ability.
diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
index 73e4f2648e49..c2677ec0564d 100644
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_FARADAY
bool "Faraday devices"
default y
depends on ARM || NDS32 || COMPILE_TEST
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config FTMAC100
depends on ARM || NDS32 || COMPILE_TEST
depends on !64BIT || BROKEN
select MII
- ---help---
+ help
This driver supports the FTMAC100 10/100 Ethernet controller
from Faraday. It is used on Faraday A320, Andes AG101 and some
other ARM/NDS32 SoC's.
@@ -33,7 +33,7 @@ config FTGMAC100
depends on !64BIT || BROKEN
select PHYLIB
select MDIO_ASPEED if MACH_ASPEED_G6
- ---help---
+ help
This driver supports the FTGMAC100 Gigabit Ethernet controller
from Faraday. It is used on Faraday A369, Andes AG102 and some
other ARM/NDS32 SoC's.
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index bfc6bfe94d0a..a1d53ddf1593 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -10,7 +10,7 @@ config NET_VENDOR_FREESCALE
M523x || M527x || M5272 || M528x || M520x || M532x || \
ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
ARCH_LAYERSCAPE || COMPILE_TEST
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -27,7 +27,7 @@ config FEC
default ARCH_MXC || SOC_IMX28 if ARM
select PHYLIB
imply PTP_1588_CLOCK
- ---help---
+ help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
@@ -37,7 +37,7 @@ config FEC_MPC52xx
select CRC32
select PHYLIB
select PPC_BESTCOMM_FEC
- ---help---
+ help
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
If compiled as module, it will be called fec_mpc52xx.
@@ -46,7 +46,7 @@ config FEC_MPC52xx_MDIO
bool "FEC MPC52xx MDIO bus driver"
depends on FEC_MPC52xx
default y
- ---help---
+ help
The MPC5200's FEC can connect to the Ethernet either with
an external MII PHY chip or 10 Mbps 7-wire interface
(Motorola? industry standard).
@@ -60,7 +60,7 @@ source "drivers/net/ethernet/freescale/fman/Kconfig"
config FSL_PQ_MDIO
tristate "Freescale PQ MDIO"
select PHYLIB
- ---help---
+ help
This driver supports the MDIO bus used by the gianfar and UCC drivers.
config FSL_XGMAC_MDIO
@@ -68,7 +68,7 @@ config FSL_XGMAC_MDIO
select PHYLIB
depends on OF
select OF_MDIO
- ---help---
+ help
This driver supports the MDIO bus on the Fman 10G Ethernet MACs, and
on the FMan mEMAC (which supports both Clauses 22 and 45)
@@ -78,7 +78,7 @@ config UCC_GETH
select FSL_PQ_MDIO
select PHYLIB
select FIXED_PHY
- ---help---
+ help
This driver supports the Gigabit Ethernet mode of the QUICC Engine,
which is available on some Freescale SOCs.
@@ -93,7 +93,7 @@ config GIANFAR
select PHYLIB
select FIXED_PHY
select CRC32
- ---help---
+ help
This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
on the 8540.
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
index 0a54c7e0e4ae..626ec58a0afc 100644
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -5,7 +5,7 @@ menuconfig FSL_DPAA_ETH
select PHYLIB
select FIXED_PHY
select FSL_FMAN_MAC
- ---help---
+ help
Data Path Acceleration Architecture Ethernet driver,
supporting the Freescale QorIQ chips.
Depends on Freescale Buffer Manager and Queue Manager
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
index cee99f20d2c2..0a1400cb410a 100644
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_FUJITSU
bool "Fujitsu devices"
default y
depends on PCMCIA
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
depends on PCMCIA
select CRC32
- ---help---
+ help
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
PCMCIA (PC-card) Ethernet card to your computer.
diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 2fff43509098..44f9279cdde1 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_HISILICON
default y
depends on OF || ACPI
depends on ARM || ARM64 || COMPILE_TEST
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -42,7 +42,7 @@ config HIP04_ETH
select MARVELL_PHY
select MFD_SYSCON
select HNS_MDIO
- ---help---
+ help
If you wish to compile a kernel for a hardware with hisilicon p04 SoC and
want to use the internal ethernet then you should answer Y to this.
@@ -59,13 +59,13 @@ config HI13X1_GMAC
config HNS_MDIO
tristate
select PHYLIB
- ---help---
+ help
This selects the HNS MDIO support. It is needed by HNS_DSAF to access
the PHY
config HNS
tristate
- ---help---
+ help
This selects the framework support for Hisilicon Network Subsystem. It
is needed by any driver which provides HNS acceleration engine or make
use of the engine
@@ -74,7 +74,7 @@ config HNS_DSAF
tristate "Hisilicon HNS DSAF device Support"
select HNS
select HNS_MDIO
- ---help---
+ help
This selects the DSAF (Distributed System Area Frabric) network
acceleration engine support. The engine is used in Hisilicon hip05,
Hi1610 and further ICT SoC
@@ -83,14 +83,14 @@ config HNS_ENET
tristate "Hisilicon HNS Ethernet Device Support"
select PHYLIB
select HNS
- ---help---
+ help
This selects the general ethernet driver for HNS. This module make
use of any HNS AE driver, such as HNS_DSAF
config HNS3
tristate "Hisilicon Network Subsystem Support HNS3 (Framework)"
depends on PCI
- ---help---
+ help
This selects the framework support for Hisilicon Network Subsystem 3.
This layer facilitates clients like ENET, RoCE and user-space ethernet
drivers(like ODP)to register with HNAE devices and their associated
@@ -102,7 +102,7 @@ config HNS3_HCLGE
tristate "Hisilicon HNS3 HCLGE Acceleration Engine & Compatibility Layer Support"
default m
depends on PCI_MSI
- ---help---
+ help
This selects the HNS3_HCLGE network acceleration engine & its hardware
compatibility layer. The engine would be used in Hisilicon hip08 family of
SoCs and further upcoming SoCs.
@@ -111,7 +111,7 @@ config HNS3_DCB
bool "Hisilicon HNS3 Data Center Bridge Support"
default n
depends on HNS3_HCLGE && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the HNS3 driver.
If unsure, say N.
@@ -120,7 +120,7 @@ config HNS3_HCLGEVF
tristate "Hisilicon HNS3VF Acceleration Engine & Compatibility Layer Support"
depends on PCI_MSI
depends on HNS3_HCLGE
- ---help---
+ help
This selects the HNS3 VF drivers network acceleration engine & its hardware
compatibility layer. The engine would be used in Hisilicon hip08 family of
SoCs and further upcoming SoCs.
@@ -130,7 +130,7 @@ config HNS3_ENET
default m
depends on 64BIT && PCI
depends on INET
- ---help---
+ help
This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08
family of SoCs. This module depends upon HNAE3 driver to access the HNAE3
devices and their associated operations.
diff --git a/drivers/net/ethernet/huawei/Kconfig b/drivers/net/ethernet/huawei/Kconfig
index bdcbface62d7..c05fce15eb51 100644
--- a/drivers/net/ethernet/huawei/Kconfig
+++ b/drivers/net/ethernet/huawei/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_HUAWEI
bool "Huawei devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
diff --git a/drivers/net/ethernet/huawei/hinic/Kconfig b/drivers/net/ethernet/huawei/hinic/Kconfig
index cabc2f72d9d7..936e2dd3bb13 100644
--- a/drivers/net/ethernet/huawei/hinic/Kconfig
+++ b/drivers/net/ethernet/huawei/hinic/Kconfig
@@ -6,7 +6,7 @@
config HINIC
tristate "Huawei Intelligent PCIE Network Interface Card"
depends on (PCI_MSI && (X86 || ARM64))
- ---help---
+ help
This driver supports HiNIC PCIE Ethernet cards.
To compile this driver as part of the kernel, choose Y here.
If unsure, choose N.
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
index 33faff985438..3b5fab123824 100644
--- a/drivers/net/ethernet/i825xx/Kconfig
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_I825XX
bool "Intel (82586/82593/82596) devices"
default y
depends on NET_VENDOR_INTEL
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question does not directly affect the
@@ -20,14 +20,14 @@ if NET_VENDOR_I825XX
config ARM_ETHER1
tristate "Acorn Ether1 support"
depends on ARM && ARCH_ACORN
- ---help---
+ help
If you have an Acorn system with one of these (AKA25) network cards,
you should say Y to this option if you wish to use it with Linux.
config BVME6000_NET
tristate "BVME6000 Ethernet support"
depends on BVME6000
- ---help---
+ help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
in your kernel.
@@ -36,14 +36,14 @@ config BVME6000_NET
config LASI_82596
tristate "Lasi ethernet"
depends on GSC
- ---help---
+ help
Say Y here to support the builtin Intel 82596 ethernet controller
found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on MVME16x
- ---help---
+ help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
driver for this chip in your kernel.
@@ -52,14 +52,14 @@ config MVME16x_NET
config SNI_82596
tristate "SNI RM ethernet"
depends on SNI_RM
- ---help---
+ help
Say Y here to support the on-board Intel 82596 ethernet controller
built into SNI RM machines.
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
depends on SUN3
- ---help---
+ help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
that this driver does not support 82586-based adapters on additional
diff --git a/drivers/net/ethernet/ibm/Kconfig b/drivers/net/ethernet/ibm/Kconfig
index a95d941360f8..c0c112d95b89 100644
--- a/drivers/net/ethernet/ibm/Kconfig
+++ b/drivers/net/ethernet/ibm/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_IBM
bool "IBM devices"
default y
depends on PPC_PSERIES || PPC_DCR || (IBMEBUS && SPARSEMEM)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_IBM
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
depends on PPC_PSERIES
- ---help---
+ help
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
@@ -32,7 +32,7 @@ source "drivers/net/ethernet/ibm/emac/Kconfig"
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS && SPARSEMEM
- ---help---
+ help
This driver supports the IBM pSeries eHEA ethernet adapter.
To compile the driver as a module, choose M here. The module
@@ -41,7 +41,7 @@ config EHEA
config IBMVNIC
tristate "IBM Virtual NIC support"
depends on PPC_PSERIES
- ---help---
+ help
This driver supports Virtual NIC adapters on IBM i and IBM System p
systems.
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index ad34e4335df2..48a8f9aa1dd0 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_INTEL
bool "Intel devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config E100
tristate "Intel(R) PRO/100+ support"
depends on PCI
select MII
- ---help---
+ help
This driver supports Intel(R) PRO/100 family of adapters.
To verify that your adapter is supported, find the board ID number
on the adapter. Look for a label that has a barcode and a number
@@ -42,7 +42,7 @@ config E100
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
depends on PCI
- ---help---
+ help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -60,7 +60,7 @@ config E1000E
depends on PCI && (!SPARC32 || BROKEN)
select CRC32
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
use the regular e1000 driver For more information on how to
@@ -79,7 +79,7 @@ config E1000E_HWTS
bool "Support HW cross-timestamp on PCH devices"
default y
depends on E1000E && X86
- ---help---
+ help
Say Y to enable hardware supported cross-timestamping on PCH
devices. The cross-timestamp is available through the PTP clock
driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
@@ -90,7 +90,7 @@ config IGB
imply PTP_1588_CLOCK
select I2C
select I2C_ALGOBIT
- ---help---
+ help
This driver supports Intel(R) 82575/82576 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -107,7 +107,7 @@ config IGB_HWMON
bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
default y
depends on IGB && HWMON && !(IGB=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose thermal sensor data on Intel devices.
Some of our devices contain thermal sensors, both external and internal.
@@ -118,7 +118,7 @@ config IGB_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on IGB && DCA && !(IGB=y && DCA=m)
- ---help---
+ help
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
@@ -126,7 +126,7 @@ config IGB_DCA
config IGBVF
tristate "Intel(R) 82576 Virtual Function Ethernet support"
depends on PCI
- ---help---
+ help
This driver supports Intel(R) 82576 virtual functions. For more
information on how to identify your adapter, go to the Adapter &
Driver ID Guide that can be located at:
@@ -142,7 +142,7 @@ config IGBVF
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
- ---help---
+ help
This driver supports Intel(R) PRO/10GbE family of adapters for
PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
instead. For more information on how to identify your adapter, go
@@ -162,7 +162,7 @@ config IXGBE
select MDIO
select PHYLIB
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -179,7 +179,7 @@ config IXGBE_HWMON
bool "Intel(R) 10GbE PCI Express adapters HWMON support"
default y
depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose the thermal sensor data on some of
our cards, via a hwmon sysfs interface.
@@ -187,7 +187,7 @@ config IXGBE_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
- ---help---
+ help
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
@@ -196,7 +196,7 @@ config IXGBE_DCB
bool "Data Center Bridging (DCB) Support"
default n
depends on IXGBE && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
@@ -208,13 +208,13 @@ config IXGBE_IPSEC
depends on XFRM_OFFLOAD
default y
select XFRM_ALGO
- ---help---
+ help
Enable support for IPSec offload in ixgbe.ko
config IXGBEVF
tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
depends on PCI_MSI
- ---help---
+ help
This driver supports Intel(R) PCI Express virtual functions for the
Intel(R) ixgbe driver. For more information on how to identify your
adapter, go to the Adapter & Driver ID Guide that can be located at:
@@ -234,14 +234,14 @@ config IXGBEVF_IPSEC
depends on XFRM_OFFLOAD
default y
select XFRM_ALGO
- ---help---
+ help
Enable support for IPSec offload in ixgbevf.ko
config I40E
tristate "Intel(R) Ethernet Controller XL710 Family support"
imply PTP_1588_CLOCK
depends on PCI
- ---help---
+ help
This driver supports Intel(R) Ethernet Controller XL710 Family of
devices. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -258,7 +258,7 @@ config I40E_DCB
bool "Data Center Bridging (DCB) Support"
default n
depends on I40E && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
@@ -272,7 +272,7 @@ config I40EVF
tristate "Intel(R) Ethernet Adaptive Virtual Function support"
select IAVF
depends on PCI_MSI
- ---help---
+ help
This driver supports virtual functions for Intel XL710,
X710, X722, XXV710, and all devices advertising support for
Intel Ethernet Adaptive Virtual Function devices. For more
@@ -295,7 +295,7 @@ config ICE
default n
depends on PCI_MSI
select NET_DEVLINK
- ---help---
+ help
This driver supports Intel(R) Ethernet Connection E800 Series of
devices. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -313,7 +313,7 @@ config FM10K
default n
depends on PCI_MSI
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Intel(R) FM10000 Ethernet Switch Host
Interface. For more information on how to identify your adapter,
go to the Adapter & Driver ID Guide that can be located at:
@@ -330,7 +330,7 @@ config IGC
tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
default n
depends on PCI
- ---help---
+ help
This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
family of adapters.
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index 3d5caea096fb..cd8ddd1ef6f2 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MARVELL
bool "Marvell devices"
default y
depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET || COMPILE_TEST
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config MV643XX_ETH
depends on INET
select PHYLIB
select MVMDIO
- ---help---
+ help
This driver supports the gigabit ethernet MACs in the
Marvell Discovery PPC/MIPS chipset family (MV643XX) and
in the Marvell Orion ARM SoC family.
@@ -35,7 +35,7 @@ config MVMDIO
tristate "Marvell MDIO interface support"
depends on HAS_IOMEM
select PHYLIB
- ---help---
+ help
This driver supports the MDIO interface found in the network
interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
Dove, Armada 370 and Armada XP).
@@ -46,7 +46,7 @@ config MVNETA_BM_ENABLE
tristate "Marvell Armada 38x/XP network interface BM support"
depends on MVNETA
depends on !64BIT
- ---help---
+ help
This driver supports auxiliary block of the network
interface units in the Marvell ARMADA XP and ARMADA 38x SoC
family, which is called buffer manager.
@@ -62,7 +62,7 @@ config MVNETA
select MVMDIO
select PHYLINK
select PAGE_POOL
- ---help---
+ help
This driver supports the network interface units in the
Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
ARMADA 37xx SoC family.
@@ -87,7 +87,7 @@ config MVPP2
depends on ARCH_MVEBU || COMPILE_TEST
select MVMDIO
select PHYLINK
- ---help---
+ help
This driver supports the network interface units in the
Marvell ARMADA 375, 7K and 8K SoCs.
@@ -96,7 +96,7 @@ config PXA168_ETH
depends on HAS_IOMEM
depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST
select PHYLIB
- ---help---
+ help
This driver supports the pxa168 Ethernet ports.
To compile this driver as a module, choose M here. The module
@@ -106,7 +106,7 @@ config SKGE
tristate "Marvell Yukon Gigabit Ethernet support"
depends on PCI
select CRC32
- ---help---
+ help
This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
and related Gigabit Ethernet adapters. It is a new smaller driver
with better performance and more complete ethtool support.
@@ -127,7 +127,7 @@ config SKGE
config SKGE_DEBUG
bool "Debugging interface"
depends on SKGE && DEBUG_FS
- ---help---
+ help
This option adds the ability to dump driver state for debugging.
The file /sys/kernel/debug/skge/ethX displays the state of the internal
transmit and receive rings.
@@ -137,7 +137,7 @@ config SKGE_DEBUG
config SKGE_GENESIS
bool "Support for older SysKonnect Genesis boards"
depends on SKGE
- ---help---
+ help
This enables support for the older and uncommon SysKonnect Genesis
chips, which support MII via an external transceiver, instead of
an internal one. Disabling this option will save some memory
@@ -147,7 +147,7 @@ config SKY2
tristate "Marvell Yukon 2 support"
depends on PCI
select CRC32
- ---help---
+ help
This driver supports Gigabit Ethernet adapters based on the
Marvell Yukon 2 chipset:
Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
@@ -162,7 +162,7 @@ config SKY2
config SKY2_DEBUG
bool "Debugging interface"
depends on SKY2 && DEBUG_FS
- ---help---
+ help
This option adds the ability to dump driver state for debugging.
The file /sys/kernel/debug/sky2/ethX displays the state of the internal
transmit and receive rings.
diff --git a/drivers/net/ethernet/marvell/octeontx2/Kconfig b/drivers/net/ethernet/marvell/octeontx2/Kconfig
index d9dfb614daa6..543a1d047567 100644
--- a/drivers/net/ethernet/marvell/octeontx2/Kconfig
+++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig
@@ -21,7 +21,7 @@ config NDC_DIS_DYNAMIC_CACHING
bool "Disable caching of dynamic entries in NDC"
depends on OCTEONTX2_AF
default n
- ---help---
+ help
This config option disables caching of dynamic entries such as NIX SQEs
, NPA stack pages etc in NDC. Also locks down NIX SQ/CQ/RQ/RSS and
NPA Aura/Pool contexts.
diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index 500c15e7ea4a..62a820b1eb16 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -2,7 +2,7 @@
config NET_VENDOR_MEDIATEK
bool "MediaTek devices"
depends on ARCH_MEDIATEK || SOC_MT7621 || SOC_MT7620
- ---help---
+ help
If you have a Mediatek SoC with ethernet, say Y.
if NET_VENDOR_MEDIATEK
@@ -10,7 +10,7 @@ if NET_VENDOR_MEDIATEK
config NET_MEDIATEK_SOC
tristate "MediaTek SoC Gigabit Ethernet support"
select PHYLINK
- ---help---
+ help
This driver supports the gigabit ethernet MACs in the
MediaTek SoC family.
diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig
index 23cf7917a0c9..ff6613a5cdd3 100644
--- a/drivers/net/ethernet/mellanox/Kconfig
+++ b/drivers/net/ethernet/mellanox/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MELLANOX
bool "Mellanox devices"
default y
depends on PCI || I2C
- ---help---
+ help
If you have a network (Ethernet or RDMA) device belonging to this
class, say Y.
diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index e69c3c31e701..400e611ba041 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -8,7 +8,7 @@ config MLX4_EN
depends on PCI && NETDEVICES && ETHERNET && INET
select MLX4_CORE
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Mellanox Technologies ConnectX Ethernet
devices.
@@ -16,7 +16,7 @@ config MLX4_EN_DCB
bool "Data Center Bridging (DCB) Support"
default y
depends on MLX4_EN && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
If set to N, will not be able to configure QoS and ratelimit attributes.
@@ -34,7 +34,7 @@ config MLX4_DEBUG
bool "Verbose debugging output" if (MLX4_CORE && EXPERT)
depends on MLX4_CORE
default y
- ---help---
+ help
This option causes debugging code to be compiled into the
mlx4_core driver. The output can be turned on via the
debug_level module parameter (which can also be set after
@@ -44,6 +44,6 @@ config MLX4_CORE_GEN2
bool "Support for old gen2 Mellanox PCI IDs" if (MLX4_CORE)
depends on MLX4_CORE
default y
- ---help---
+ help
Say Y here if you want to use old gen2 Mellanox devices in the
driver.
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index b6ffd1622cfd..4dfdbb82ea9d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -12,7 +12,7 @@ config MLX5_CORE
depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
default n
- ---help---
+ help
Core driver for low level functionality of the ConnectX-4 and
Connect-IB cards by Mellanox Technologies.
@@ -23,7 +23,7 @@ config MLX5_FPGA
bool "Mellanox Technologies Innova support"
depends on MLX5_CORE
select MLX5_ACCEL
- ---help---
+ help
Build support for the Innova family of network cards by Mellanox
Technologies. Innova network cards are comprised of a ConnectX chip
and an FPGA chip on one board. If you select this option, the
@@ -36,14 +36,14 @@ config MLX5_CORE_EN
select PAGE_POOL
select DIMLIB
default n
- ---help---
+ help
Ethernet support in Mellanox Technologies ConnectX-4 NIC.
config MLX5_EN_ARFS
bool "Mellanox MLX5 ethernet accelerated receive flow steering (ARFS) support"
depends on MLX5_CORE_EN && RFS_ACCEL
default y
- ---help---
+ help
Mellanox MLX5 ethernet hardware-accelerated receive flow steering support,
Enables ethernet netdevice arfs support and ntuple filtering.
@@ -51,7 +51,7 @@ config MLX5_EN_RXNFC
bool "Mellanox MLX5 ethernet rx nfc flow steering support"
depends on MLX5_CORE_EN
default y
- ---help---
+ help
Mellanox MLX5 ethernet rx nfc flow steering support
Enables ethtool receive network flow classification, which allows user defined
flow rules to direct traffic into arbitrary rx queue via ethtool set/get_rxnfc
@@ -61,7 +61,7 @@ config MLX5_MPFS
bool "Mellanox Technologies MLX5 MPFS support"
depends on MLX5_CORE_EN
default y
- ---help---
+ help
Mellanox Technologies Ethernet Multi-Physical Function Switch (MPFS)
support in ConnectX NIC. MPFs is required for when multi-PF configuration
is enabled to allow passing user configured unicast MAC addresses to the
@@ -71,7 +71,7 @@ config MLX5_ESWITCH
bool "Mellanox Technologies MLX5 SRIOV E-Switch support"
depends on MLX5_CORE_EN && NET_SWITCHDEV
default y
- ---help---
+ help
Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC.
E-Switch provides internal SRIOV packet steering and switching for the
enabled VFs and PF in two available modes:
@@ -107,7 +107,7 @@ config MLX5_CORE_EN_DCB
bool "Data Center Bridging (DCB) Support"
default y
depends on MLX5_CORE_EN && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
If set to N, will not be able to configure QoS and ratelimit attributes.
@@ -119,7 +119,7 @@ config MLX5_CORE_IPOIB
bool "Mellanox 5th generation network adapters (connectX series) IPoIB offloads support"
depends on MLX5_CORE_EN
default n
- ---help---
+ help
MLX5 IPoIB offloads & acceleration support.
config MLX5_FPGA_IPSEC
diff --git a/drivers/net/ethernet/mellanox/mlxfw/Kconfig b/drivers/net/ethernet/mellanox/mlxfw/Kconfig
index 5b604501f33e..c339f3c46e45 100644
--- a/drivers/net/ethernet/mellanox/mlxfw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxfw/Kconfig
@@ -5,7 +5,7 @@
config MLXFW
tristate "Mellanox Technologies firmware flash module"
- ---help---
+ help
This driver supports Mellanox Technologies Firmware
flashing common logic.
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
index f458fd1ce9f8..872e9910bb7c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
@@ -6,7 +6,7 @@
config MLXSW_CORE
tristate "Mellanox Technologies Switch ASICs support"
select NET_DEVLINK
- ---help---
+ help
This driver supports Mellanox Technologies Switch ASICs family.
To compile this driver as a module, choose M here: the
@@ -17,14 +17,14 @@ config MLXSW_CORE_HWMON
depends on MLXSW_CORE && HWMON
depends on !(MLXSW_CORE=y && HWMON=m)
default y
- ---help---
+ help
Say Y here if you want to expose HWMON interface on mlxsw devices.
config MLXSW_CORE_THERMAL
bool "Thermal zone support for Mellanox Technologies Switch ASICs"
depends on MLXSW_CORE && THERMAL
default y
- ---help---
+ help
Say Y here if you want to automatically control fans speed according
ambient temperature reported by ASIC.
@@ -32,7 +32,7 @@ config MLXSW_PCI
tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
depends on PCI && HAS_IOMEM && MLXSW_CORE
default m
- ---help---
+ help
This is PCI bus implementation for Mellanox Technologies Switch ASICs.
To compile this driver as a module, choose M here: the
@@ -42,7 +42,7 @@ config MLXSW_I2C
tristate "I2C bus implementation for Mellanox Technologies Switch ASICs"
depends on I2C && MLXSW_CORE
default m
- ---help---
+ help
This is I2C bus implementation for Mellanox Technologies Switch ASICs.
To compile this driver as a module, choose M here: the
@@ -52,7 +52,7 @@ config MLXSW_SWITCHIB
tristate "Mellanox Technologies SwitchIB and SwitchIB-2 support"
depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV
default m
- ---help---
+ help
This driver supports Mellanox Technologies SwitchIB and SwitchIB-2
Infiniband Switch ASICs.
@@ -63,7 +63,7 @@ config MLXSW_SWITCHX2
tristate "Mellanox Technologies SwitchX-2 support"
depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV
default m
- ---help---
+ help
This driver supports Mellanox Technologies SwitchX-2 Ethernet
Switch ASICs.
@@ -86,7 +86,7 @@ config MLXSW_SPECTRUM
imply PTP_1588_CLOCK
select NET_PTP_CLASSIFY if PTP_1588_CLOCK
default m
- ---help---
+ help
This driver supports Mellanox Technologies
Spectrum/Spectrum-2/Spectrum-3 Ethernet Switch ASICs.
@@ -97,7 +97,7 @@ config MLXSW_SPECTRUM_DCB
bool "Data Center Bridging (DCB) support"
depends on MLXSW_SPECTRUM && DCB
default y
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
@@ -105,7 +105,7 @@ config MLXSW_MINIMAL
tristate "Mellanox Technologies minimal I2C support"
depends on MLXSW_CORE && MLXSW_I2C
default m
- ---help---
+ help
This driver supports I2C access for Mellanox Technologies Switch
ASICs.
diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig
index 09f35209d43d..42bc014136fe 100644
--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MICREL
bool "Micrel devices"
default y
depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_MICREL
config KS8842
tristate "Micrel KSZ8841/42 with generic bus interface"
depends on HAS_IOMEM && DMA_ENGINE
- ---help---
+ help
This platform driver is for KSZ8841(1-port) / KS8842(2-port)
ethernet switch chip (managed, VLAN, QoS) from Micrel or
Timberdale(FPGA).
@@ -31,7 +31,7 @@ config KS8851
select MII
select CRC32
select EEPROM_93CX6
- ---help---
+ help
SPI driver for Micrel KS8851 SPI attached network chip.
config KS8851_MLL
@@ -40,7 +40,7 @@ config KS8851_MLL
select MII
select CRC32
select EEPROM_93CX6
- ---help---
+ help
This platform driver is for Micrel KS8851 Address/data bus
multiplexed network chip.
@@ -49,7 +49,7 @@ config KSZ884X_PCI
depends on PCI
select MII
select CRC32
- ---help---
+ help
This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
index 45fe41f3d9f3..31f9a82dc113 100644
--- a/drivers/net/ethernet/microchip/Kconfig
+++ b/drivers/net/ethernet/microchip/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_MICROCHIP
bool "Microchip devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config ENC28J60
tristate "ENC28J60 support"
depends on SPI
select CRC32
- ---help---
+ help
Support for the Microchip EN28J60 ethernet chip.
To compile this driver as a module, choose M here. The module will be
@@ -29,14 +29,14 @@ config ENC28J60
config ENC28J60_WRITEVERIFY
bool "Enable write verify"
depends on ENC28J60
- ---help---
+ help
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
config ENCX24J600
tristate "ENCX24J600 support"
depends on SPI
- ---help---
+ help
Support for the Microchip ENC424J600/624J600 ethernet chip.
To compile this driver as a module, choose M here. The module will be
@@ -47,7 +47,7 @@ config LAN743X
depends on PCI
select PHYLIB
select CRC16
- ---help---
+ help
Support for the Microchip LAN743x PCI Express Gigabit Ethernet chip
To compile this driver as a module, choose M here. The module will be
diff --git a/drivers/net/ethernet/moxa/Kconfig b/drivers/net/ethernet/moxa/Kconfig
index 1a7cacbc0c59..134802b521cb 100644
--- a/drivers/net/ethernet/moxa/Kconfig
+++ b/drivers/net/ethernet/moxa/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MOXART
bool "MOXA ART devices"
default y
depends on (ARM && ARCH_MOXART)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config ARM_MOXART_ETHER
tristate "MOXART Ethernet support"
depends on ARM && ARCH_MOXART
select NET_CORE
- ---help---
+ help
If you wish to compile a kernel for a hardware with MOXA ART SoC and
want to use the internal ethernet then you should answer Y to this.
diff --git a/drivers/net/ethernet/myricom/Kconfig b/drivers/net/ethernet/myricom/Kconfig
index 6bc993eae4c4..81267fd72dbf 100644
--- a/drivers/net/ethernet/myricom/Kconfig
+++ b/drivers/net/ethernet/myricom/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MYRI
bool "Myricom devices"
default y
depends on PCI && INET
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config MYRI10GE
depends on PCI && INET
select FW_LOADER
select CRC32
- ---help---
+ help
This driver supports Myricom Myri-10G Dual Protocol interface in
Ethernet mode. If the eeprom on your board is not recent enough,
you will need a newer firmware image.
@@ -37,7 +37,7 @@ config MYRI10GE_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
- ---help---
+ help
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig
index c519c1f30225..0a92101aa3f1 100644
--- a/drivers/net/ethernet/natsemi/Kconfig
+++ b/drivers/net/ethernet/natsemi/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_NATSEMI
bool "National Semiconductor devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -19,7 +19,7 @@ if NET_VENDOR_NATSEMI
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
depends on MAC
- ---help---
+ help
Support for NatSemi SONIC based Ethernet devices. This includes
the onboard Ethernet in many Quadras as well as some LC-PDS,
a few Nubus and all known Comm Slot Ethernet cards. If you have
@@ -31,7 +31,7 @@ config MACSONIC
config MIPS_JAZZ_SONIC
tristate "MIPS JAZZ onboard SONIC Ethernet support"
depends on MACH_JAZZ
- ---help---
+ help
This is the driver for the onboard card of MIPS Magnum 4000,
Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
@@ -39,7 +39,7 @@ config NATSEMI
tristate "National Semiconductor DP8381x series PCI Ethernet support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for the National Semiconductor DP83810 series,
which is used in cards from PureData, NetGear, Linksys
and others, including the 83815 chip.
@@ -49,7 +49,7 @@ config NATSEMI
config NS83820
tristate "National Semiconductor DP83820 support"
depends on PCI
- ---help---
+ help
This is a driver for the National Semiconductor DP83820 series
of gigabit ethernet MACs. Cards using this chipset include
the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
@@ -59,7 +59,7 @@ config NS83820
config XTENSA_XT2000_SONIC
tristate "Xtensa XT2000 onboard SONIC Ethernet support"
depends on XTENSA_PLATFORM_XT2000
- ---help---
+ help
This is the driver for the onboard card of the Xtensa XT2000 board.
endif # NET_VENDOR_NATSEMI
diff --git a/drivers/net/ethernet/neterion/Kconfig b/drivers/net/ethernet/neterion/Kconfig
index a82a37094579..5484f18f272e 100644
--- a/drivers/net/ethernet/neterion/Kconfig
+++ b/drivers/net/ethernet/neterion/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_NETERION
bool "Neterion (Exar) devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_NETERION
config S2IO
tristate "Neterion (Exar) Xframe 10Gb Ethernet Adapter"
depends on PCI
- ---help---
+ help
This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
These were originally released from S2IO, which renamed itself
Neterion. So, the adapters might be labeled as either one, depending
@@ -35,7 +35,7 @@ config S2IO
config VXGE
tristate "Neterion (Exar) X3100 Series 10GbE PCIe Server Adapter"
depends on PCI
- ---help---
+ help
This driver supports Exar Corp's X3100 Series 10 GbE PCIe
I/O Virtualized Server Adapter. These were originally released from
Neterion, which was later acquired by Exar. So, the adapters might be
@@ -51,7 +51,7 @@ config VXGE_DEBUG_TRACE_ALL
bool "Enabling All Debug trace statements in driver"
default n
depends on VXGE
- ---help---
+ help
Say Y here if you want to enabling all the debug trace statements in
the vxge driver. By default only few debug trace statements are
enabled.
diff --git a/drivers/net/ethernet/netronome/Kconfig b/drivers/net/ethernet/netronome/Kconfig
index a3f68a718813..d8b99d6a0356 100644
--- a/drivers/net/ethernet/netronome/Kconfig
+++ b/drivers/net/ethernet/netronome/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_NETRONOME
bool "Netronome(R) devices"
default y
- ---help---
+ help
If you have a Netronome(R) network (Ethernet) card or device, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config NFP
depends on VXLAN || VXLAN=n
depends on TLS && TLS_DEVICE || TLS_DEVICE=n
select NET_DEVLINK
- ---help---
+ help
This driver supports the Netronome(R) NFP4000/NFP6000 based
cards working as a advanced Ethernet NIC. It works with both
SR-IOV physical and virtual functions.
@@ -33,7 +33,7 @@ config NFP_APP_FLOWER
depends on NET_SWITCHDEV
depends on IPV6!=m || NFP=m
default y
- ---help---
+ help
Enable driver support for TC Flower offload on NFP4000 and NFP6000.
Say Y, if you are planning to make use of TC Flower offload
either directly, with Open vSwitch, or any other way. Note that
@@ -55,7 +55,7 @@ config NFP_APP_ABM_NIC
config NFP_DEBUG
bool "Debug support for Netronome(R) NFP4000/NFP6000 NIC drivers"
depends on NFP
- ---help---
+ help
Enable extra sanity checks and debugfs support in
Netronome(R) NFP4000/NFP6000 NIC drivers.
Note: selecting this option may adversely impact
diff --git a/drivers/net/ethernet/nvidia/Kconfig b/drivers/net/ethernet/nvidia/Kconfig
index faacbd129c44..c653786b1d05 100644
--- a/drivers/net/ethernet/nvidia/Kconfig
+++ b/drivers/net/ethernet/nvidia/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_NVIDIA
bool "NVIDIA devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_NVIDIA
config FORCEDETH
tristate "nForce Ethernet support"
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) controller of this type, say Y here.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/oki-semi/Kconfig b/drivers/net/ethernet/oki-semi/Kconfig
index 1c455c645bce..c2fff04ba7b6 100644
--- a/drivers/net/ethernet/oki-semi/Kconfig
+++ b/drivers/net/ethernet/oki-semi/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_OKI
bool "OKI Semiconductor devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
index 69e11d19bdc6..af84f72bf08e 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
@@ -9,7 +9,7 @@ config PCH_GBE
select MII
select PTP_1588_CLOCK_PCH
select NET_PTP_CLASSIFY
- ---help---
+ help
This is a gigabit ethernet driver for EG20T PCH.
EG20T PCH is the platform controller hub that is used in Intel's
general embedded platform. EG20T PCH has Gigabit Ethernet interface.
diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
index ead3750b4489..de91331dcb7d 100644
--- a/drivers/net/ethernet/packetengines/Kconfig
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_PACKET_ENGINES
bool "Packet Engines devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI
select MII
- ---help---
+ help
If you have a Gigabit Ethernet card of this type, say Y here.
To compile this driver as a module, choose M here. The module will be
@@ -31,7 +31,7 @@ config YELLOWFIN
tristate "Packet Engines Yellowfin Gigabit-NIC support"
depends on PCI
select CRC32
- ---help---
+ help
Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
used by the Beowulf Linux cluster project. See
diff --git a/drivers/net/ethernet/pasemi/Kconfig b/drivers/net/ethernet/pasemi/Kconfig
index f4562243d4a0..cd68ebcf3e47 100644
--- a/drivers/net/ethernet/pasemi/Kconfig
+++ b/drivers/net/ethernet/pasemi/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_PASEMI
bool "PA Semi devices"
default y
depends on PPC_PASEMI && PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
depends on PPC_PASEMI && PCI
select PHYLIB
- ---help---
+ help
This driver supports the on-chip 1/10Gbit Ethernet controller on
PA Semi's PWRficient line of chips.
diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig
index 55a29ec76680..8f743d80760b 100644
--- a/drivers/net/ethernet/qlogic/Kconfig
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_QLOGIC
bool "QLogic devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_QLOGIC
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
- ---help---
+ help
This driver supports QLogic ISP3XXX gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
@@ -30,7 +30,7 @@ config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
select FW_LOADER
- ---help---
+ help
This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
devices.
@@ -38,7 +38,7 @@ config QLCNIC_SRIOV
bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
depends on QLCNIC && PCI_IOV
default y
- ---help---
+ help
This configuration parameter enables Single Root Input Output
Virtualization support for QLE83XX Converged Ethernet devices.
This allows for virtual function acceleration in virtualized
@@ -48,7 +48,7 @@ config QLCNIC_DCB
bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
depends on QLCNIC && DCB
default y
- ---help---
+ help
This configuration parameter enables DCB support in QLE83XX
and QLE82XX Converged Ethernet devices. This allows for DCB
get operations support through rtNetlink interface. Only CEE
@@ -59,7 +59,7 @@ config QLCNIC_HWMON
bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
default y
- ---help---
+ help
This configuration parameter can be used to read the
board temperature in Converged Ethernet devices
supported by qlcnic.
@@ -70,7 +70,7 @@ config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
depends on PCI
select FW_LOADER
- ---help---
+ help
This enables the support for NetXen's Gigabit Ethernet card.
config QED
@@ -79,7 +79,7 @@ config QED
select ZLIB_INFLATE
select CRC8
select NET_DEVLINK
- ---help---
+ help
This enables the support for ...
config QED_LL2
@@ -89,7 +89,7 @@ config QED_SRIOV
bool "QLogic QED 25/40/100Gb SR-IOV support"
depends on QED && PCI_IOV
default y
- ---help---
+ help
This configuration parameter enables Single Root Input Output
Virtualization support for QED devices.
This allows for virtual function acceleration in virtualized
@@ -99,7 +99,7 @@ config QEDE
tristate "QLogic QED 25/40/100Gb Ethernet NIC"
depends on QED
imply PTP_1588_CLOCK
- ---help---
+ help
This enables the support for ...
config QED_RDMA
diff --git a/drivers/net/ethernet/qualcomm/Kconfig b/drivers/net/ethernet/qualcomm/Kconfig
index 09a678a94634..a4434eb38950 100644
--- a/drivers/net/ethernet/qualcomm/Kconfig
+++ b/drivers/net/ethernet/qualcomm/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_QUALCOMM
bool "Qualcomm devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -25,7 +25,7 @@ config QCA7000_SPI
tristate "Qualcomm Atheros QCA7000 SPI support"
select QCA7000
depends on SPI_MASTER && OF
- ---help---
+ help
This SPI protocol driver supports the Qualcomm Atheros QCA7000.
To compile this driver as a module, choose M here. The module
@@ -35,7 +35,7 @@ config QCA7000_UART
tristate "Qualcomm Atheros QCA7000 UART support"
select QCA7000
depends on SERIAL_DEV_BUS && OF
- ---help---
+ help
This UART protocol driver supports the Qualcomm Atheros QCA7000.
Currently the driver assumes these device UART settings:
@@ -52,7 +52,7 @@ config QCOM_EMAC
depends on HAS_DMA && HAS_IOMEM
select CRC32
select PHYLIB
- ---help---
+ help
This driver supports the Qualcomm Technologies, Inc. Gigabit
Ethernet Media Access Controller (EMAC). The controller
supports IEEE 802.3-2002, half-duplex mode at 10/100 Mb/s,
diff --git a/drivers/net/ethernet/qualcomm/rmnet/Kconfig b/drivers/net/ethernet/qualcomm/rmnet/Kconfig
index 9f9279575e2e..b4a575eb0175 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/Kconfig
+++ b/drivers/net/ethernet/qualcomm/rmnet/Kconfig
@@ -7,7 +7,7 @@ menuconfig RMNET
tristate "RmNet MAP driver"
default n
select GRO_CELLS
- ---help---
+ help
If you select this, you will enable the RMNET module which is used
for handling data in the multiplexing and aggregation protocol (MAP)
format in the embedded data path. RMNET devices can be attached to
diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig
index 76df60c2f4ac..6884c7864bb9 100644
--- a/drivers/net/ethernet/rdc/Kconfig
+++ b/drivers/net/ethernet/rdc/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_RDC
bool "RDC devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config R6040
select CRC32
select MII
select PHYLIB
- ---help---
+ help
This is a driver for the R6040 Fast Ethernet MACs found in the
the RDC R-321x System-on-chips.
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 5e0b9d2f14f7..93d9df55b361 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_REALTEK
bool "Realtek devices"
default y
depends on PCI || (PARPORT && X86)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config ATP
tristate "AT-LAN-TEC/RealTek pocket adapter support"
depends on PARPORT && X86
select CRC32
- ---help---
+ help
This is a network (Ethernet) device which attaches to your parallel
port. Read the file <file:drivers/net/ethernet/realtek/atp.c>
if you want to use this. If you intend to use this driver, you
@@ -36,7 +36,7 @@ config 8139CP
depends on PCI
select CRC32
select MII
- ---help---
+ help
This is a driver for the Fast Ethernet PCI network cards based on
the RTL8139C+ chips. If you have one of those, say Y here.
@@ -48,7 +48,7 @@ config 8139TOO
depends on PCI
select CRC32
select MII
- ---help---
+ help
This is a driver for the Fast Ethernet PCI network cards based on
the RTL 8129/8130/8139 chips. If you have one of those, say Y here.
@@ -59,7 +59,7 @@ config 8139TOO_PIO
bool "Use PIO instead of MMIO"
default y
depends on 8139TOO
- ---help---
+ help
This instructs the driver to use programmed I/O ports (PIO) instead
of PCI shared memory (MMIO). This can possibly solve some problems
in case your mainboard has memory consistency issues. If unsure,
@@ -68,7 +68,7 @@ config 8139TOO_PIO
config 8139TOO_TUNE_TWISTER
bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
depends on 8139TOO
- ---help---
+ help
This implements a function which might come in handy in case you
are using low quality on long cabling. It is required for RealTek
RTL-8139 revision K boards, and totally unused otherwise. It tries
@@ -79,7 +79,7 @@ config 8139TOO_TUNE_TWISTER
config 8139TOO_8129
bool "Support for older RTL-8129/8130 boards"
depends on 8139TOO
- ---help---
+ help
This enables support for the older and uncommon RTL-8129 and
RTL-8130 chips, which support MII via an external transceiver,
instead of an internal one. Disabling this option will save some
@@ -88,7 +88,7 @@ config 8139TOO_8129
config 8139_OLD_RX_RESET
bool "Use older RX-reset method"
depends on 8139TOO
- ---help---
+ help
The 8139too driver was recently updated to contain a more rapid
reset sequence, in the face of severe receive errors. This "new"
RX-reset method should be adequate for all boards. But if you
@@ -102,7 +102,7 @@ config R8169
select CRC32
select PHYLIB
select REALTEK_PHY
- ---help---
+ help
Say Y here if you have a Realtek Ethernet adapter belonging to
the following families:
RTL8169 Gigabit Ethernet
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index bb0ebdfd4459..5a2a4af31812 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_RENESAS
bool "Renesas devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config SH_ETH
select MII
select MDIO_BITBANG
select PHYLIB
- ---help---
+ help
Renesas SuperH Ethernet device driver.
This driver supporting CPUs are:
- SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757,
diff --git a/drivers/net/ethernet/rocker/Kconfig b/drivers/net/ethernet/rocker/Kconfig
index 1083de99830d..99e1290e0307 100644
--- a/drivers/net/ethernet/rocker/Kconfig
+++ b/drivers/net/ethernet/rocker/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_ROCKER
bool "Rocker devices"
default y
- ---help---
+ help
If you have a network device belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -19,7 +19,7 @@ if NET_VENDOR_ROCKER
config ROCKER
tristate "Rocker switch driver (EXPERIMENTAL)"
depends on PCI && NET_SWITCHDEV && BRIDGE
- ---help---
+ help
This driver supports Rocker switch device.
To compile this driver as a module, choose M here: the
diff --git a/drivers/net/ethernet/samsung/Kconfig b/drivers/net/ethernet/samsung/Kconfig
index e92a178a76df..0582e110b1c0 100644
--- a/drivers/net/ethernet/samsung/Kconfig
+++ b/drivers/net/ethernet/samsung/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_SAMSUNG
bool "Samsung Ethernet devices"
default y
- ---help---
+ help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -23,7 +23,7 @@ config SXGBE_ETH
select PHYLIB
select CRC32
imply PTP_1588_CLOCK
- ---help---
+ help
This is the driver for the SXGBE 10G Ethernet IP block found on
Samsung platforms.
diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig
index f3ac9cba5770..ad1df37571dd 100644
--- a/drivers/net/ethernet/seeq/Kconfig
+++ b/drivers/net/ethernet/seeq/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SEEQ
bool "SEEQ devices"
default y
depends on HAS_IOMEM
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,14 +20,14 @@ if NET_VENDOR_SEEQ
config ARM_ETHER3
tristate "Acorn/ANT Ether3 support"
depends on ARM && ARCH_ACORN
- ---help---
+ help
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
depends on SGI_HAS_SEEQ
- ---help---
+ help
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
diff --git a/drivers/net/ethernet/sfc/Kconfig b/drivers/net/ethernet/sfc/Kconfig
index ea5a9220196c..81b0f7d3a025 100644
--- a/drivers/net/ethernet/sfc/Kconfig
+++ b/drivers/net/ethernet/sfc/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_SOLARFLARE
bool "Solarflare devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config SFC
select MDIO
select CRC32
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports 10/40-gigabit Ethernet cards based on
the Solarflare SFC9000-family and SFC9100-family controllers.
@@ -32,7 +32,7 @@ config SFC_MTD
bool "Solarflare SFC9000/SFC9100-family MTD support"
depends on SFC && MTD && !(SFC=y && MTD=m)
default y
- ---help---
+ help
This exposes the on-board flash and/or EEPROM as MTD devices
(e.g. /dev/mtd1). This is required to update the firmware or
the boot configuration under Linux.
@@ -40,14 +40,14 @@ config SFC_MCDI_MON
bool "Solarflare SFC9000/SFC9100-family hwmon support"
depends on SFC && HWMON && !(SFC=y && HWMON=m)
default y
- ---help---
+ help
This exposes the on-board firmware-managed sensors as a
hardware monitor device.
config SFC_SRIOV
bool "Solarflare SFC9000-family SR-IOV support"
depends on SFC && PCI_IOV
default y
- ---help---
+ help
This enables support for the SFC9000 I/O Virtualization
features, allowing accelerated network performance in
virtualized environments.
@@ -55,7 +55,7 @@ config SFC_MCDI_LOGGING
bool "Solarflare SFC9000/SFC9100-family MCDI logging support"
depends on SFC
default y
- ---help---
+ help
This enables support for tracing of MCDI (Management-Controller-to-
Driver-Interface) commands and responses, allowing debugging of
driver/firmware interaction. The tracing is actually enabled by
diff --git a/drivers/net/ethernet/sfc/falcon/Kconfig b/drivers/net/ethernet/sfc/falcon/Kconfig
index 20e361950f7d..071154045dc2 100644
--- a/drivers/net/ethernet/sfc/falcon/Kconfig
+++ b/drivers/net/ethernet/sfc/falcon/Kconfig
@@ -6,7 +6,7 @@ config SFC_FALCON
select CRC32
select I2C
select I2C_ALGOBIT
- ---help---
+ help
This driver supports 10-gigabit Ethernet cards based on
the Solarflare SFC4000 controller.
@@ -16,7 +16,7 @@ config SFC_FALCON_MTD
bool "Solarflare SFC4000 MTD support"
depends on SFC_FALCON && MTD && !(SFC_FALCON=y && MTD=m)
default y
- ---help---
+ help
This exposes the on-board flash and/or EEPROM as MTD devices
(e.g. /dev/mtd1). This is required to update the boot
configuration under Linux.
diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig
index bc26fa0d196f..af66bb0a20d1 100644
--- a/drivers/net/ethernet/sgi/Kconfig
+++ b/drivers/net/ethernet/sgi/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SGI
bool "SGI devices"
default y
depends on (PCI && SGI_MFD_IOC3) || SGI_IP32
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config SGI_IOC3_ETH
select CRC16
select CRC32
select MII
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
config SGI_O2MACE_ETH
diff --git a/drivers/net/ethernet/silan/Kconfig b/drivers/net/ethernet/silan/Kconfig
index 71929d148c3c..7ed08d588ac2 100644
--- a/drivers/net/ethernet/silan/Kconfig
+++ b/drivers/net/ethernet/silan/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SILAN
bool "Silan devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config SC92031
tristate "Silan SC92031 PCI Fast Ethernet Adapter driver"
depends on PCI
select CRC32
- ---help---
+ help
This is a driver for the Fast Ethernet PCI network cards based on
the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
have one of these, say Y here.
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
index d848ab0349a7..775d76d9890e 100644
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SIS
bool "Silicon Integrated Systems (SiS) devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config SIS900
depends on PCI
select CRC32
select MII
- ---help---
+ help
This is a driver for the Fast Ethernet PCI network cards based on
the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
SiS 630 and SiS 540 chipsets.
@@ -38,7 +38,7 @@ config SIS190
depends on PCI
select CRC32
select MII
- ---help---
+ help
Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
appear in lan on motherboard designs which are based on SiS 965
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 4d2d91ec8b41..6293b1e6c772 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -9,7 +9,7 @@ config NET_VENDOR_SMSC
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
ISA || MAC || MIPS || NIOS2 || PCI || \
PCMCIA || SUPERH || XTENSA || H8300
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config SMC9194
tristate "SMC 9194 support"
depends on ISA
select CRC32
- ---help---
+ help
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
another SMC9192/9194 based chipset. Say Y if you want it compiled
@@ -40,7 +40,7 @@ config SMC91X
depends on !OF || GPIOLIB
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
MIPS || NIOS2 || SUPERH || XTENSA || H8300
- ---help---
+ help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
compiled into the kernel, and read the file
@@ -56,7 +56,7 @@ config PCMCIA_SMC91C92
depends on PCMCIA
select CRC32
select MII
- ---help---
+ help
Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
@@ -68,7 +68,7 @@ config EPIC100
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
which is based on the SMC83c17x (EPIC/100).
More specific information and updates are available from
@@ -79,7 +79,7 @@ config SMC911X
select CRC32
select MII
depends on (ARM || SUPERH)
- ---help---
+ help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
Say Y here if you want it compiled into the kernel.
@@ -94,7 +94,7 @@ config SMSC911X
select CRC32
select MII
select PHYLIB
- ---help---
+ help
Say Y here if you want support for SMSC LAN911x and LAN921x families
of ethernet controllers.
@@ -104,7 +104,7 @@ config SMSC911X
config SMSC911X_ARCH_HOOKS
def_bool n
depends on SMSC911X
- ---help---
+ help
If the arch enables this, it allows the arch to implement various
hooks for more comprehensive interrupt control and also to override
the source of the MAC address.
@@ -115,7 +115,7 @@ config SMSC9420
select CRC32
select PHYLIB
select SMSC_PHY
- ---help---
+ help
This is a driver for SMSC's LAN9420 PCI ethernet adapter.
Say Y here if you want it compiled into the kernel.
diff --git a/drivers/net/ethernet/socionext/Kconfig b/drivers/net/ethernet/socionext/Kconfig
index 95e99baf3f45..48298389851d 100644
--- a/drivers/net/ethernet/socionext/Kconfig
+++ b/drivers/net/ethernet/socionext/Kconfig
@@ -2,7 +2,7 @@
config NET_VENDOR_SOCIONEXT
bool "Socionext ethernet drivers"
default y
- ---help---
+ help
Option to select ethernet drivers for Socionext platforms.
Note that the answer to this question doesn't directly affect the
@@ -18,7 +18,7 @@ config SNI_AVE
depends on HAS_IOMEM
select MFD_SYSCON
select PHYLIB
- ---help---
+ help
Driver for gigabit ethernet MACs, called AVE, in the
Socionext UniPhier family.
@@ -28,7 +28,7 @@ config SNI_NETSEC
select PHYLIB
select PAGE_POOL
select MII
- ---help---
+ help
Enable to add support for the SocioNext NetSec Gigabit Ethernet
controller + PHY, as found on the Synquacer SC2A11 SoC
diff --git a/drivers/net/ethernet/stmicro/Kconfig b/drivers/net/ethernet/stmicro/Kconfig
index 39ef86360417..cc136b4c9afd 100644
--- a/drivers/net/ethernet/stmicro/Kconfig
+++ b/drivers/net/ethernet/stmicro/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_STMICRO
bool "STMicroelectronics devices"
default y
depends on HAS_IOMEM
- ---help---
+ help
If you have a network (Ethernet) card based on Synopsys Ethernet IP
Cores, say Y.
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 36bd2e18f23b..9a47c5aec91a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -9,7 +9,7 @@ config STMMAC_ETH
select CRC32
imply PTP_1588_CLOCK
select RESET_CONTROLLER
- ---help---
+ help
This is the driver for the Ethernet IPs built around a
Synopsys IP Core.
@@ -20,7 +20,7 @@ config STMMAC_SELFTESTS
depends on INET
depends on STMMAC_ETH
default n
- ---help---
+ help
This adds support for STMMAC Selftests using ethtool. Enable this
feature if you are facing problems with your HW and submit the test
results to the netdev Mailing List.
@@ -30,7 +30,7 @@ config STMMAC_PLATFORM
depends on STMMAC_ETH
select MFD_SYSCON
default y
- ---help---
+ help
This selects the platform specific bus support for the stmmac driver.
This is the driver used on several SoCs:
STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
@@ -52,7 +52,7 @@ config DWMAC_DWC_QOS_ETH
config DWMAC_GENERIC
tristate "Generic driver for DWMAC"
default STMMAC_PLATFORM
- ---help---
+ help
Generic DWMAC driver for platforms that don't require any
platform specific code to function or is using platform
data for setup.
@@ -84,7 +84,7 @@ config DWMAC_LPC18XX
default ARCH_LPC18XX
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
select MFD_SYSCON
- ---help---
+ help
Support for NXP LPC18xx/43xx DWMAC Ethernet.
config DWMAC_MEDIATEK
@@ -155,7 +155,7 @@ config DWMAC_STI
default ARCH_STI
depends on OF && (ARCH_STI || COMPILE_TEST)
select MFD_SYSCON
- ---help---
+ help
Support for ethernet controller on STi SOCs.
This selects STi SoC glue layer support for the stmmac
@@ -167,7 +167,7 @@ config DWMAC_STM32
default ARCH_STM32
depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
select MFD_SYSCON
- ---help---
+ help
Support for ethernet controller on STM32 SOCs.
This selects STM32 SoC glue layer support for the stmmac
@@ -178,7 +178,7 @@ config DWMAC_SUNXI
tristate "Allwinner GMAC support"
default ARCH_SUNXI
depends on OF && (ARCH_SUNXI || COMPILE_TEST)
- ---help---
+ help
Support for Allwinner A20/A31 GMAC ethernet controllers.
This selects Allwinner SoC glue layer support for the
@@ -190,7 +190,7 @@ config DWMAC_SUN8I
default ARCH_SUNXI
depends on OF && (ARCH_SUNXI || COMPILE_TEST)
select MDIO_BUS_MUX
- ---help---
+ help
Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
This selects Allwinner SoC glue layer support for the
@@ -202,7 +202,7 @@ config DWMAC_IMX8
default ARCH_MXC
depends on OF && (ARCH_MXC || COMPILE_TEST)
select MFD_SYSCON
- ---help---
+ help
Support for ethernet controller on NXP i.MX8 SOCs.
This selects NXP SoC glue layer support for the stmmac
@@ -216,7 +216,7 @@ config DWMAC_INTEL
default X86
depends on X86 && STMMAC_ETH && PCI
depends on COMMON_CLK
- ---help---
+ help
This selects the Intel platform specific bus support for the
stmmac driver. This driver is used for Intel Quark/EHL/TGL.
@@ -224,7 +224,7 @@ config STMMAC_PCI
tristate "STMMAC PCI bus support"
depends on STMMAC_ETH && PCI
depends on COMMON_CLK
- ---help---
+ help
This selects the platform specific bus support for the stmmac driver.
This driver was tested on XLINX XC2V3000 FF1152AMT0221
D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
diff --git a/drivers/net/ethernet/sun/Kconfig b/drivers/net/ethernet/sun/Kconfig
index 7b982e02ea3a..309de38a7530 100644
--- a/drivers/net/ethernet/sun/Kconfig
+++ b/drivers/net/ethernet/sun/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SUN
bool "Sun devices"
default y
depends on SUN3 || SBUS || PCI || SUN_LDOMS
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on (SBUS || PCI)
select CRC32
- ---help---
+ help
This driver supports the "hme" interface present on most Ultra
systems and as an option on older Sbus systems. This driver supports
both PCI and Sbus devices. This driver also supports the "qfe" quad
@@ -34,7 +34,7 @@ config SUNBMAC
tristate "Sun BigMAC 10/100baseT support"
depends on SBUS
select CRC32
- ---help---
+ help
This driver supports the "be" interface available as an Sbus option.
This is Sun's older 100baseT Ethernet device.
@@ -45,7 +45,7 @@ config SUNQE
tristate "Sun QuadEthernet support"
depends on SBUS
select CRC32
- ---help---
+ help
This driver supports the "qe" 10baseT Ethernet device, available as
an Sbus option. Note that this is not the same as Quad FastEthernet
"qfe" which is supported by the Happy Meal driver instead.
@@ -58,7 +58,7 @@ config SUNGEM
depends on PCI
select CRC32
select SUNGEM_PHY
- ---help---
+ help
Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
<http://docs.oracle.com/cd/E19455-01/806-3985-10/806-3985-10.pdf>.
@@ -66,7 +66,7 @@ config CASSINI
tristate "Sun Cassini support"
depends on PCI
select CRC32
- ---help---
+ help
Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
<http://docs.oracle.com/cd/E19113-01/giga.ether.pci/817-4341-10/817-4341-10.pdf>.
@@ -80,7 +80,7 @@ config SUNVNET
default m
depends on SUN_LDOMS
depends on SUNVNET_COMMON
- ---help---
+ help
Support for virtual network devices under Sun Logical Domains.
config LDMVSW
@@ -88,7 +88,7 @@ config LDMVSW
default m
depends on SUN_LDOMS
depends on SUNVNET_COMMON
- ---help---
+ help
Support for virtual switch devices under Sun4v Logical Domains.
This driver adds a network interface for every vsw-port node
found in the machine description of a service domain.
@@ -100,7 +100,7 @@ config NIU
tristate "Sun Neptune 10Gbit Ethernet support"
depends on PCI
select CRC32
- ---help---
+ help
This enables support for cards based upon Sun's
Neptune chipset.
diff --git a/drivers/net/ethernet/synopsys/Kconfig b/drivers/net/ethernet/synopsys/Kconfig
index 9e199772c1d7..f2a4287c48b8 100644
--- a/drivers/net/ethernet/synopsys/Kconfig
+++ b/drivers/net/ethernet/synopsys/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_SYNOPSYS
bool "Synopsys devices"
default y
- ---help---
+ help
If you have a network (Ethernet) device belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config DWC_XLGMAC
depends on HAS_IOMEM && HAS_DMA
select BITREVERSE
select CRC32
- ---help---
+ help
This driver supports the Synopsys DesignWare Cores Enterprise
Ethernet (dwc-xlgmac).
@@ -30,7 +30,7 @@ if DWC_XLGMAC
config DWC_XLGMAC_PCI
tristate "XLGMAC PCI bus support"
depends on DWC_XLGMAC && PCI
- ---help---
+ help
This selects the pci bus support for the dwc-xlgmac driver.
This driver was tested on Synopsys XLGMAC IP Prototyping Kit.
diff --git a/drivers/net/ethernet/tehuti/Kconfig b/drivers/net/ethernet/tehuti/Kconfig
index 8ad1526f4bdd..8735633765a1 100644
--- a/drivers/net/ethernet/tehuti/Kconfig
+++ b/drivers/net/ethernet/tehuti/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_TEHUTI
bool "Tehuti devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_TEHUTI
config TEHUTI
tristate "Tehuti Networks 10G Ethernet"
depends on PCI
- ---help---
+ help
Tehuti Networks 10G Ethernet NIC
endif # NET_VENDOR_TEHUTI
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 182d10f171f6..50f55364d4fb 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_TI
bool "Texas Instruments (TI) devices"
default y
depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config TI_DAVINCI_EMAC
select TI_DAVINCI_MDIO
select PHYLIB
select GENERIC_ALLOCATOR
- ---help---
+ help
This driver supports TI's DaVinci Ethernet .
To compile this driver as a module, choose M here: the module
@@ -33,7 +33,7 @@ config TI_DAVINCI_MDIO
tristate "TI DaVinci MDIO Support"
depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
select PHYLIB
- ---help---
+ help
This driver supports TI's DaVinci MDIO module.
To compile this driver as a module, choose M here: the module
@@ -42,7 +42,7 @@ config TI_DAVINCI_MDIO
config TI_CPSW_PHY_SEL
bool "TI CPSW Phy mode Selection (DEPRECATED)"
default n
- ---help---
+ help
This driver supports configuring of the phy mode connected to
the CPSW. DEPRECATED: use PHY_TI_GMII_SEL.
@@ -55,7 +55,7 @@ config TI_CPSW
select PAGE_POOL
select REGMAP
imply PHY_TI_GMII_SEL
- ---help---
+ help
This driver supports TI's CPSW Ethernet Switch.
To compile this driver as a module, choose M here: the module
@@ -83,7 +83,7 @@ config TI_CPTS
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
depends on COMMON_CLK
depends on PTP_1588_CLOCK
- ---help---
+ help
This driver supports the Common Platform Time Sync unit of
the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem.
The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the
@@ -133,7 +133,7 @@ config TI_KEYSTONE_NETCP
depends on OF
depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
depends on TI_CPTS || !TI_CPTS
- ---help---
+ help
This driver supports TI's Keystone NETCP Core.
To compile this driver as a module, choose M here: the module
@@ -142,7 +142,7 @@ config TI_KEYSTONE_NETCP
config TI_KEYSTONE_NETCP_ETHSS
depends on TI_KEYSTONE_NETCP
tristate "TI Keystone NETCP Ethernet subsystem Support"
- ---help---
+ help
To compile this driver as a module, choose M here: the module
will be called keystone_netcp_ethss.
@@ -150,7 +150,7 @@ config TI_KEYSTONE_NETCP_ETHSS
config TLAN
tristate "TI ThunderLAN support"
depends on (PCI || EISA)
- ---help---
+ help
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y here.
@@ -168,7 +168,7 @@ config CPMAC
tristate "TI AR7 CPMAC Ethernet support"
depends on AR7
select PHYLIB
- ---help---
+ help
TI AR7 CPMAC Ethernet support
endif # NET_VENDOR_TI
diff --git a/drivers/net/ethernet/toshiba/Kconfig b/drivers/net/ethernet/toshiba/Kconfig
index 9ccdf032404e..701e9b7c1c3b 100644
--- a/drivers/net/ethernet/toshiba/Kconfig
+++ b/drivers/net/ethernet/toshiba/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_TOSHIBA
bool "Toshiba devices"
default y
depends on PCI && (PPC_IBM_CELL_BLADE || MIPS) || PPC_PS3
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config GELIC_NET
tristate "PS3 Gigabit Ethernet driver"
depends on PPC_PS3
select PS3_SYS_MANAGER
- ---help---
+ help
This driver supports the network device on the PS3 game
console. This driver has built-in support for Ethernet.
@@ -32,7 +32,7 @@ config GELIC_WIRELESS
bool "PS3 Wireless support"
depends on GELIC_NET && WLAN
select WIRELESS_EXT
- ---help---
+ help
This option adds the support for the wireless feature of PS3.
If you have the wireless-less model of PS3 or have no plan to
use wireless feature, disabling this option saves memory. As
@@ -44,7 +44,7 @@ config SPIDER_NET
depends on PCI && PPC_IBM_CELL_BLADE
select FW_LOADER
select SUNGEM_PHY
- ---help---
+ help
This driver supports the Gigabit Ethernet chips present on the
Cell Processor-Based Blades from IBM.
diff --git a/drivers/net/ethernet/tundra/Kconfig b/drivers/net/ethernet/tundra/Kconfig
index 5c909df0c3b9..edd52b2bd135 100644
--- a/drivers/net/ethernet/tundra/Kconfig
+++ b/drivers/net/ethernet/tundra/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_TUNDRA
bool "Tundra devices"
default y
depends on TSI108_BRIDGE
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_TUNDRA
config TSI108_ETH
tristate "Tundra TSI108 gigabit Ethernet support"
depends on TSI108_BRIDGE
- ---help---
+ help
This driver supports Tundra TSI108 gigabit Ethernet ports.
To compile this driver as a module, choose M here: the module
will be called tsi108_eth.
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
index 6cff5f7d57c4..da287ef65be7 100644
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_VIA
bool "VIA devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config VIA_RHINE
depends on HAS_DMA
select CRC32
select MII
- ---help---
+ help
If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
Ethernet functions can also be found integrated on South Bridges
@@ -35,7 +35,7 @@ config VIA_RHINE
config VIA_RHINE_MMIO
bool "Use MMIO instead of PIO"
depends on VIA_RHINE
- ---help---
+ help
This instructs the driver to use PCI shared memory (MMIO) instead of
programmed I/O ports (PIO). Enabling this gives an improvement in
processing time in parts of the driver.
@@ -49,7 +49,7 @@ config VIA_VELOCITY
select CRC32
select CRC_CCITT
select MII
- ---help---
+ help
If you have a VIA "Velocity" based network card say Y here.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/wiznet/Kconfig b/drivers/net/ethernet/wiznet/Kconfig
index 0422775e1659..4bac2ad2d6a1 100644
--- a/drivers/net/ethernet/wiznet/Kconfig
+++ b/drivers/net/ethernet/wiznet/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_WIZNET
bool "WIZnet devices"
depends on HAS_IOMEM
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_WIZNET
config WIZNET_W5100
tristate "WIZnet W5100 Ethernet support"
depends on HAS_IOMEM
- ---help---
+ help
Support for WIZnet W5100 chips.
W5100 is a single chip with integrated 10/100 Ethernet MAC,
@@ -33,7 +33,7 @@ config WIZNET_W5100
config WIZNET_W5300
tristate "WIZnet W5300 Ethernet support"
depends on HAS_IOMEM
- ---help---
+ help
Support for WIZnet W5300 chips.
W5300 is a single chip with integrated 10/100 Ethernet MAC,
@@ -50,20 +50,20 @@ choice
config WIZNET_BUS_DIRECT
bool "Direct address bus mode"
- ---help---
+ help
In direct address mode host system can directly access all registers
after mapping to Memory-Mapped I/O space.
config WIZNET_BUS_INDIRECT
bool "Indirect address bus mode"
- ---help---
+ help
In indirect address mode host system indirectly accesses registers
using Indirect Mode Address Register and Indirect Mode Data Register,
which are directly mapped to Memory-Mapped I/O space.
config WIZNET_BUS_ANY
bool "Select interface mode in runtime"
- ---help---
+ help
If interface mode is unknown in compile time, it can be selected
in runtime from board/platform resources configuration.
@@ -74,7 +74,7 @@ config WIZNET_W5100_SPI
tristate "WIZnet W5100/W5200/W5500 Ethernet support for SPI mode"
depends on WIZNET_BUS_ANY && WIZNET_W5100
depends on SPI
- ---help---
+ help
In SPI mode host system accesses registers using SPI protocol
(mode 0) on the SPI bus.
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 0810af8193cb..d0d0d4fe9d40 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_XILINX
bool "Xilinx devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,20 +20,20 @@ config XILINX_EMACLITE
tristate "Xilinx 10/100 Ethernet Lite support"
depends on PPC32 || MICROBLAZE || ARCH_ZYNQ || MIPS
select PHYLIB
- ---help---
+ help
This driver supports the 10/100 Ethernet Lite from Xilinx.
config XILINX_AXI_EMAC
tristate "Xilinx 10/100/1000 AXI Ethernet support"
select PHYLINK
- ---help---
+ help
This driver supports the 10/100/1000 Ethernet from Xilinx for the
AXI bus interface used in Xilinx Virtex FPGAs and Soc's.
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
select PHYLIB
- ---help---
+ help
This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
core used in Xilinx Spartan and Virtex FPGAs
diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig
index ad5390079b13..7497b9bea511 100644
--- a/drivers/net/ethernet/xircom/Kconfig
+++ b/drivers/net/ethernet/xircom/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_XIRCOM
bool "Xircom devices"
default y
depends on PCMCIA
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_XIRCOM
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
depends on PCMCIA
- ---help---
+ help
Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
Ethernet or Fast Ethernet card to your computer.
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index 98aa7b8ddb06..7b83a6e5d894 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_XSCALE
default y
depends on NET_VENDOR_INTEL && (ARM && ARCH_IXP4XX && \
IXP4XX_NPE && IXP4XX_QMGR)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question does not directly affect the
@@ -23,7 +23,7 @@ config IXP4XX_ETH
depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
select PHYLIB
select NET_PTP_CLASSIFY
- ---help---
+ help
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.