stmmac: add the Energy Efficient Ethernet support

This patch adds the Energy Efficient Ethernet support to the stmmac.

Please see the driver's documentation for further details about this support
in the driver.

Thanks also goes to Rayagond Kokatanur for his first implementation.

Note:
 to clearly manage and expose the lpi interrupt status and eee ethtool
 stats I've had to do some modifications to the driver's design and I
 found really useful to move other parts of the code (e.g. mmc irq stat)
 in the main directly. So this means that some core has been reworked
 to introduce the EEE.

v1: initial patch
v2: fixed some sparse issues (typos)
v3: erroneously sent the v2 renamed as v3
v4:
	o Fixed the return value of the stmmac_eee_init as suggested by D.Miller
	o Totally reviewed the ethtool support for EEE
	o Added a new internal parameter to tune the SW timer for TX LPI.
v5: do not change any eee setting in case of the stmmac_ethtool_op_set_eee fails
    (it has to return -EOPNOTSUPP in that case).

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 30 insertions, 1 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index bcd54d6e94fd..e2d083228f3a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -95,6 +95,16 @@ struct stmmac_extra_stats {
 	unsigned long poll_n;
 	unsigned long sched_timer_n;
 	unsigned long normal_irq_n;
+	unsigned long mmc_tx_irq_n;
+	unsigned long mmc_rx_irq_n;
+	unsigned long mmc_rx_csum_offload_irq_n;
+	/* EEE */
+	unsigned long irq_receive_pmt_irq_n;
+	unsigned long irq_tx_path_in_lpi_mode_n;
+	unsigned long irq_tx_path_exit_lpi_mode_n;
+	unsigned long irq_rx_path_in_lpi_mode_n;
+	unsigned long irq_rx_path_exit_lpi_mode_n;
+	unsigned long phy_eee_wakeup_error_n;
 };
 
 /* CSR Frequency Access Defines*/
@@ -162,6 +172,17 @@ enum tx_dma_irq_status {
 	handle_tx_rx = 3,
 };
 
+enum core_specific_irq_mask {
+	core_mmc_tx_irq = 1,
+	core_mmc_rx_irq = 2,
+	core_mmc_rx_csum_offload_irq = 4,
+	core_irq_receive_pmt_irq = 8,
+	core_irq_tx_path_in_lpi_mode = 16,
+	core_irq_tx_path_exit_lpi_mode = 32,
+	core_irq_rx_path_in_lpi_mode = 64,
+	core_irq_rx_path_exit_lpi_mode = 128,
+};
+
 /* DMA HW capabilities */
 struct dma_features {
 	unsigned int mbps_10_100;
@@ -208,6 +229,10 @@ struct dma_features {
 #define MAC_ENABLE_TX		0x00000008	/* Transmitter Enable */
 #define MAC_RNABLE_RX		0x00000004	/* Receiver Enable */
 
+/* Default LPI timers */
+#define STMMAC_DEFAULT_LIT_LS_TIMER	0x3E8
+#define STMMAC_DEFAULT_TWT_LS_TIMER	0x0
+
 struct stmmac_desc_ops {
 	/* DMA RX descriptor ring initialization */
 	void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size,
@@ -278,7 +303,7 @@ struct stmmac_ops {
 	/* Dump MAC registers */
 	void (*dump_regs) (void __iomem *ioaddr);
 	/* Handle extra events on specific interrupts hw dependent */
-	void (*host_irq_status) (void __iomem *ioaddr);
+	int (*host_irq_status) (void __iomem *ioaddr);
 	/* Multicast filter setting */
 	void (*set_filter) (struct net_device *dev, int id);
 	/* Flow control setting */
@@ -291,6 +316,10 @@ struct stmmac_ops {
 			       unsigned int reg_n);
 	void (*get_umac_addr) (void __iomem *ioaddr, unsigned char *addr,
 			       unsigned int reg_n);
+	void (*set_eee_mode) (void __iomem *ioaddr);
+	void (*reset_eee_mode) (void __iomem *ioaddr);
+	void (*set_eee_timer) (void __iomem *ioaddr, int ls, int tw);
+	void (*set_eee_pls) (void __iomem *ioaddr, int link);
 };
 
 struct mac_link {