ixgbe: Implement support for firmware-controlled PHYs

Implement support for devices that have firmware-controlled PHYs.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 405 insertions, 3 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 9dc6079f2ac4..200f847fd8f3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -63,6 +63,18 @@ static s32 ixgbe_get_invariants_X550_a(struct ixgbe_hw *hw)
 	return 0;
 }
 
+static s32 ixgbe_get_invariants_X550_a_fw(struct ixgbe_hw *hw)
+{
+	struct ixgbe_phy_info *phy = &hw->phy;
+
+	/* Start with X540 invariants, since so similar */
+	ixgbe_get_invariants_X540(hw);
+
+	phy->ops.set_phy_power = NULL;
+
+	return 0;
+}
+
 /** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
  *  @hw: pointer to hardware structure
  **/
@@ -447,6 +459,159 @@ s32 ixgbe_fw_phy_activity(struct ixgbe_hw *hw, u16 activity,
 	return IXGBE_ERR_HOST_INTERFACE_COMMAND;
 }
 
+static const struct {
+	u16 fw_speed;
+	ixgbe_link_speed phy_speed;
+} ixgbe_fw_map[] = {
+	{ FW_PHY_ACT_LINK_SPEED_10, IXGBE_LINK_SPEED_10_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_100, IXGBE_LINK_SPEED_100_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_1G, IXGBE_LINK_SPEED_1GB_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_2_5G, IXGBE_LINK_SPEED_2_5GB_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_5G, IXGBE_LINK_SPEED_5GB_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_10G, IXGBE_LINK_SPEED_10GB_FULL },
+};
+
+/**
+ * ixgbe_get_phy_id_fw - Get the phy ID via firmware command
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+static s32 ixgbe_get_phy_id_fw(struct ixgbe_hw *hw)
+{
+	u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	u16 phy_speeds;
+	u16 phy_id_lo;
+	s32 rc;
+	u16 i;
+
+	if (hw->phy.id)
+		return 0;
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_PHY_INFO, &info);
+	if (rc)
+		return rc;
+
+	hw->phy.speeds_supported = 0;
+	phy_speeds = info[0] & FW_PHY_INFO_SPEED_MASK;
+	for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) {
+		if (phy_speeds & ixgbe_fw_map[i].fw_speed)
+			hw->phy.speeds_supported |= ixgbe_fw_map[i].phy_speed;
+	}
+
+	hw->phy.id = info[0] & FW_PHY_INFO_ID_HI_MASK;
+	phy_id_lo = info[1] & FW_PHY_INFO_ID_LO_MASK;
+	hw->phy.id |= phy_id_lo & IXGBE_PHY_REVISION_MASK;
+	hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK;
+	if (!hw->phy.id || hw->phy.id == IXGBE_PHY_REVISION_MASK)
+		return IXGBE_ERR_PHY_ADDR_INVALID;
+
+	hw->phy.autoneg_advertised = hw->phy.speeds_supported;
+	hw->phy.eee_speeds_supported = IXGBE_LINK_SPEED_100_FULL |
+				       IXGBE_LINK_SPEED_1GB_FULL;
+	hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported;
+	return 0;
+}
+
+/**
+ * ixgbe_identify_phy_fw - Get PHY type based on firmware command
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+static s32 ixgbe_identify_phy_fw(struct ixgbe_hw *hw)
+{
+	if (hw->bus.lan_id)
+		hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
+	else
+		hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
+
+	hw->phy.type = ixgbe_phy_fw;
+	hw->phy.ops.read_reg = NULL;
+	hw->phy.ops.write_reg = NULL;
+	return ixgbe_get_phy_id_fw(hw);
+}
+
+/**
+ * ixgbe_shutdown_fw_phy - Shutdown a firmware-controlled PHY
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+static s32 ixgbe_shutdown_fw_phy(struct ixgbe_hw *hw)
+{
+	u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 };
+
+	setup[0] = FW_PHY_ACT_FORCE_LINK_DOWN_OFF;
+	return ixgbe_fw_phy_activity(hw, FW_PHY_ACT_FORCE_LINK_DOWN, &setup);
+}
+
+/**
+ * ixgbe_setup_fw_link - Setup firmware-controlled PHYs
+ * @hw: pointer to hardware structure
+ */
+static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw)
+{
+	u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	s32 rc;
+	u16 i;
+
+	if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw))
+		return 0;
+
+	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+		hw_err(hw, "rx_pause not valid in strict IEEE mode\n");
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+	}
+
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_full:
+		setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX <<
+			    FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT;
+		break;
+	case ixgbe_fc_rx_pause:
+		setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RX <<
+			    FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT;
+		break;
+	case ixgbe_fc_tx_pause:
+		setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_TX <<
+			    FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT;
+		break;
+	default:
+		break;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) {
+		if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed)
+			setup[0] |= ixgbe_fw_map[i].fw_speed;
+	}
+	setup[0] |= FW_PHY_ACT_SETUP_LINK_HP | FW_PHY_ACT_SETUP_LINK_AN;
+
+	if (hw->phy.eee_speeds_advertised)
+		setup[0] |= FW_PHY_ACT_SETUP_LINK_EEE;
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup);
+	if (rc)
+		return rc;
+	if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN)
+		return IXGBE_ERR_OVERTEMP;
+	return 0;
+}
+
+/**
+ * ixgbe_fc_autoneg_fw - Set up flow control for FW-controlled PHYs
+ * @hw: pointer to hardware structure
+ *
+ * Called at init time to set up flow control.
+ */
+static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw)
+{
+	if (hw->fc.requested_mode == ixgbe_fc_default)
+		hw->fc.requested_mode = ixgbe_fc_full;
+
+	return ixgbe_setup_fw_link(hw);
+}
+
 /** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
  *  @hw: pointer to hardware structure
  *
@@ -1794,6 +1959,125 @@ ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
 	return rc;
 }
 
+/**
+ * ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs
+ * @hw: pointer to hardware structure
+ */
+static s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+				bool autoneg_wait)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	u32 lval, sval, flx_val;
+	s32 rc;
+
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				       IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				       IXGBE_SB_IOSF_TARGET_KR_PHY, &lval);
+	if (rc)
+		return rc;
+
+	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+	lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN;
+	lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN;
+	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
+	rc = mac->ops.write_iosf_sb_reg(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, lval);
+	if (rc)
+		return rc;
+
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				       IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id),
+				       IXGBE_SB_IOSF_TARGET_KR_PHY, &sval);
+	if (rc)
+		return rc;
+
+	sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D;
+	sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D;
+	rc = mac->ops.write_iosf_sb_reg(hw,
+					IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, sval);
+	if (rc)
+		return rc;
+
+	rc = mac->ops.write_iosf_sb_reg(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, lval);
+	if (rc)
+		return rc;
+
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				    IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				    IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val);
+	if (rc)
+		return rc;
+
+	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN;
+	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
+
+	rc = mac->ops.write_iosf_sb_reg(hw,
+				    IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				    IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val);
+	if (rc)
+		return rc;
+
+	ixgbe_restart_an_internal_phy_x550em(hw);
+
+	return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait);
+}
+
+/**
+ * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according to IEEE clause 37.
+ */
+static void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+	u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	ixgbe_link_speed speed;
+	bool link_up;
+
+	/* AN should have completed when the cable was plugged in.
+	 * Look for reasons to bail out.  Bail out if:
+	 * - FC autoneg is disabled, or if
+	 * - link is not up.
+	 */
+	if (hw->fc.disable_fc_autoneg)
+		goto out;
+
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+	if (!link_up)
+		goto out;
+
+	/* Check if auto-negotiation has completed */
+	status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &info);
+	if (status || !(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE)) {
+		status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+		goto out;
+	}
+
+	/* Negotiate the flow control */
+	status = ixgbe_negotiate_fc(hw, info[0], info[0],
+				    FW_PHY_ACT_GET_LINK_INFO_FC_RX,
+				    FW_PHY_ACT_GET_LINK_INFO_FC_TX,
+				    FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX,
+				    FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX);
+
+out:
+	if (!status) {
+		hw->fc.fc_was_autonegged = true;
+	} else {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
+	}
+}
+
 /** ixgbe_init_mac_link_ops_X550em_a - Init mac link function pointers
  *  @hw: pointer to hardware structure
  **/
@@ -1806,6 +2090,17 @@ static void ixgbe_init_mac_link_ops_X550em_a(struct ixgbe_hw *hw)
 		mac->ops.setup_fc = NULL;
 		mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a;
 		break;
+	case ixgbe_media_type_copper:
+		if (hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T &&
+		    hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T_L) {
+			mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
+			break;
+		}
+		mac->ops.fc_autoneg = ixgbe_fc_autoneg_sgmii_x550em_a;
+		mac->ops.setup_fc = ixgbe_fc_autoneg_fw;
+		mac->ops.setup_link = ixgbe_setup_sgmii_fw;
+		mac->ops.check_link = ixgbe_check_mac_link_generic;
+		break;
 	case ixgbe_media_type_backplane:
 		mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a;
 		mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a;
@@ -1853,7 +2148,7 @@ static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
 		mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
 		mac->ops.setup_fc = ixgbe_setup_fc_generic;
 		mac->ops.check_link = ixgbe_check_link_t_X550em;
-		return;
+		break;
 	case ixgbe_media_type_backplane:
 		if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII ||
 		    hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L)
@@ -1896,6 +2191,12 @@ static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
 					      ixgbe_link_speed *speed,
 					      bool *autoneg)
 {
+	if (hw->phy.type == ixgbe_phy_fw) {
+		*autoneg = true;
+		*speed = hw->phy.speeds_supported;
+		return 0;
+	}
+
 	/* SFP */
 	if (hw->phy.media_type == ixgbe_media_type_fiber) {
 		/* CS4227 SFP must not enable auto-negotiation */
@@ -2734,6 +3035,50 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
 }
 
 /**
+ * ixgbe_reset_phy_fw - Reset firmware-controlled PHYs
+ * @hw: pointer to hardware structure
+ */
+static s32 ixgbe_reset_phy_fw(struct ixgbe_hw *hw)
+{
+	u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	s32 rc;
+
+	if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw))
+		return 0;
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_PHY_SW_RESET, &store);
+	if (rc)
+		return rc;
+	memset(store, 0, sizeof(store));
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_INIT_PHY, &store);
+	if (rc)
+		return rc;
+
+	return ixgbe_setup_fw_link(hw);
+}
+
+/**
+ * ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp
+ * @hw: pointer to hardware structure
+ */
+static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw)
+{
+	u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	s32 rc;
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store);
+	if (rc)
+		return rc;
+
+	if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) {
+		ixgbe_shutdown_fw_phy(hw);
+		return IXGBE_ERR_OVERTEMP;
+	}
+	return 0;
+}
+
+/**
  * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register
  * @hw: pointer to hardware structure
  *
@@ -2819,6 +3164,10 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
 		phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
 		phy->ops.reset = ixgbe_reset_phy_t_X550em;
 		break;
+	case ixgbe_phy_fw:
+		phy->ops.setup_link = ixgbe_setup_fw_link;
+		phy->ops.reset = ixgbe_reset_phy_fw;
+		break;
 	default:
 		break;
 	}
@@ -2856,6 +3205,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_X550EM_X_1G_T:
 	case IXGBE_DEV_ID_X550EM_X_10G_T:
 	case IXGBE_DEV_ID_X550EM_A_10G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T_L:
 		media_type = ixgbe_media_type_copper;
 		break;
 	default:
@@ -2923,6 +3274,13 @@ static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
 		hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
 		IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 		break;
+	case IXGBE_DEV_ID_X550EM_A_1G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+		/* Select fast MDIO clock speed for these devices */
+		hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+		hlreg0 |= IXGBE_HLREG0_MDCSPD;
+		IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+		break;
 	default:
 		break;
 	}
@@ -3434,6 +3792,27 @@ static struct ixgbe_mac_operations mac_ops_x550em_a = {
 	.write_iosf_sb_reg	= ixgbe_write_iosf_sb_reg_x550a,
 };
 
+static struct ixgbe_mac_operations mac_ops_x550em_a_fw = {
+	X550_COMMON_MAC
+	.led_on			= ixgbe_led_on_generic,
+	.led_off		= ixgbe_led_off_generic,
+	.init_led_link_act	= ixgbe_init_led_link_act_generic,
+	.reset_hw		= ixgbe_reset_hw_X550em,
+	.get_media_type		= ixgbe_get_media_type_X550em,
+	.get_san_mac_addr	= NULL,
+	.get_wwn_prefix		= NULL,
+	.setup_link		= NULL, /* defined later */
+	.get_link_capabilities	= ixgbe_get_link_capabilities_X550em,
+	.get_bus_info		= ixgbe_get_bus_info_X550em,
+	.setup_sfp		= ixgbe_setup_sfp_modules_X550em,
+	.acquire_swfw_sync	= ixgbe_acquire_swfw_sync_x550em_a,
+	.release_swfw_sync	= ixgbe_release_swfw_sync_x550em_a,
+	.setup_fc		= ixgbe_setup_fc_x550em,
+	.fc_autoneg		= ixgbe_fc_autoneg,
+	.read_iosf_sb_reg	= ixgbe_read_iosf_sb_reg_x550a,
+	.write_iosf_sb_reg	= ixgbe_write_iosf_sb_reg_x550a,
+};
+
 #define X550_COMMON_EEP \
 	.read			= &ixgbe_read_ee_hostif_X550, \
 	.read_buffer		= &ixgbe_read_ee_hostif_buffer_X550, \
@@ -3463,11 +3842,11 @@ static const struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = {
 	.read_i2c_eeprom	= &ixgbe_read_i2c_eeprom_generic, \
 	.write_i2c_eeprom	= &ixgbe_write_i2c_eeprom_generic, \
 	.setup_link		= &ixgbe_setup_phy_link_generic, \
-	.set_phy_power		= NULL, \
-	.check_overtemp		= &ixgbe_tn_check_overtemp,
+	.set_phy_power		= NULL,
 
 static const struct ixgbe_phy_operations phy_ops_X550 = {
 	X550_COMMON_PHY
+	.check_overtemp		= &ixgbe_tn_check_overtemp,
 	.init			= NULL,
 	.identify		= &ixgbe_identify_phy_generic,
 	.read_reg		= &ixgbe_read_phy_reg_generic,
@@ -3476,6 +3855,7 @@ static const struct ixgbe_phy_operations phy_ops_X550 = {
 
 static const struct ixgbe_phy_operations phy_ops_X550EM_x = {
 	X550_COMMON_PHY
+	.check_overtemp		= &ixgbe_tn_check_overtemp,
 	.init			= &ixgbe_init_phy_ops_X550em,
 	.identify		= &ixgbe_identify_phy_x550em,
 	.read_reg		= &ixgbe_read_phy_reg_generic,
@@ -3484,6 +3864,7 @@ static const struct ixgbe_phy_operations phy_ops_X550EM_x = {
 
 static const struct ixgbe_phy_operations phy_ops_x550em_a = {
 	X550_COMMON_PHY
+	.check_overtemp		= &ixgbe_tn_check_overtemp,
 	.init			= &ixgbe_init_phy_ops_X550em,
 	.identify		= &ixgbe_identify_phy_x550em,
 	.read_reg		= &ixgbe_read_phy_reg_x550a,
@@ -3492,6 +3873,17 @@ static const struct ixgbe_phy_operations phy_ops_x550em_a = {
 	.write_reg_mdi		= &ixgbe_write_phy_reg_mdi,
 };
 
+static const struct ixgbe_phy_operations phy_ops_x550em_a_fw = {
+	X550_COMMON_PHY
+	.check_overtemp		= ixgbe_check_overtemp_fw,
+	.init			= ixgbe_init_phy_ops_X550em,
+	.identify		= ixgbe_identify_phy_fw,
+	.read_reg		= NULL,
+	.write_reg		= NULL,
+	.read_reg_mdi		= NULL,
+	.write_reg_mdi		= NULL,
+};
+
 static const struct ixgbe_link_operations link_ops_x550em_x = {
 	.read_link		= &ixgbe_read_i2c_combined_generic,
 	.read_link_unlocked	= &ixgbe_read_i2c_combined_generic_unlocked,
@@ -3541,3 +3933,13 @@ const struct ixgbe_info ixgbe_x550em_a_info = {
 	.mbx_ops		= &mbx_ops_generic,
 	.mvals			= ixgbe_mvals_x550em_a,
 };
+
+const struct ixgbe_info ixgbe_x550em_a_fw_info = {
+	.mac			= ixgbe_mac_x550em_a,
+	.get_invariants		= ixgbe_get_invariants_X550_a_fw,
+	.mac_ops		= &mac_ops_x550em_a_fw,
+	.eeprom_ops		= &eeprom_ops_X550EM_x,
+	.phy_ops		= &phy_ops_x550em_a_fw,
+	.mbx_ops		= &mbx_ops_generic,
+	.mvals			= ixgbe_mvals_x550em_a,
+};