diff options
| author | Jesse Brandeburg <jesse.brandeburg@intel.com> | 2015-09-25 02:35:47 +0300 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2015-10-16 14:33:46 +0300 |
| commit | 32b3e08fff60494cd1d281a39b51583edfd2b18f (patch) | |
| tree | 919cabae884fcd622013afc26c4695712576a4da /drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | |
| parent | 7709b4c1fff39972b6a1b6183b593c43f1a555fb (diff) | |
| download | linux-32b3e08fff60494cd1d281a39b51583edfd2b18f.tar.xz | |
drivers/net/intel: use napi_complete_done()
As per Eric Dumazet's previous patches:
(see commit (24d2e4a50737) - tg3: use napi_complete_done())
Quoting verbatim:
Using napi_complete_done() instead of napi_complete() allows
us to use /sys/class/net/ethX/gro_flush_timeout
GRO layer can aggregate more packets if the flush is delayed a bit,
without having to set too big coalescing parameters that impact
latencies.
</end quote>
Tested
configuration: low latency via ethtool -C ethx adaptive-rx off
rx-usecs 10 adaptive-tx off tx-usecs 15
workload: streaming rx using netperf TCP_MAERTS
igb:
MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo
...
Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589
Alignment Offset Bytes Bytes Recvs Bytes Sends
Local Remote Local Remote Xfered Per Per
Recv Send Recv Send Recv (avg) Send (avg)
8 8 0 0 1176930056 1475.36 797726 16384.00 71905
MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo
...
Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763
Alignment Offset Bytes Bytes Recvs Bytes Sends
Local Remote Local Remote Xfered Per Per
Recv Send Recv Send Recv (avg) Send (avg)
8 8 0 0 1175182320 50476.00 23282 16384.00 71816
i40e:
Hard to test because the traffic is incoming so fast (24Gb/s) that GRO
always receives 87kB, even at the highest interrupt rate.
Other drivers were only compile tested.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_main.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 14 |
1 files changed, 9 insertions, 5 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 1b2ad39bbfb5..9f8a7fd7a195 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2775,7 +2775,7 @@ int ixgbe_poll(struct napi_struct *napi, int budget) container_of(napi, struct ixgbe_q_vector, napi); struct ixgbe_adapter *adapter = q_vector->adapter; struct ixgbe_ring *ring; - int per_ring_budget; + int per_ring_budget, work_done = 0; bool clean_complete = true; #ifdef CONFIG_IXGBE_DCA @@ -2796,9 +2796,13 @@ int ixgbe_poll(struct napi_struct *napi, int budget) else per_ring_budget = budget; - ixgbe_for_each_ring(ring, q_vector->rx) - clean_complete &= (ixgbe_clean_rx_irq(q_vector, ring, - per_ring_budget) < per_ring_budget); + ixgbe_for_each_ring(ring, q_vector->rx) { + int cleaned = ixgbe_clean_rx_irq(q_vector, ring, + per_ring_budget); + + work_done += cleaned; + clean_complete &= (cleaned < per_ring_budget); + } ixgbe_qv_unlock_napi(q_vector); /* If all work not completed, return budget and keep polling */ @@ -2806,7 +2810,7 @@ int ixgbe_poll(struct napi_struct *napi, int budget) return budget; /* all work done, exit the polling mode */ - napi_complete(napi); + napi_complete_done(napi, work_done); if (adapter->rx_itr_setting & 1) ixgbe_set_itr(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) |