ixgbe: Make return values more direct

Make return values more direct, eliminating some gotos and
otherwise unneeded conditionals. This also eliminates some
local variables. Also a few minor cleanups in affected code
so checkpatch won't complain.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 43 insertions, 68 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 681e3205038d..c5c97b483d7c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -122,7 +122,7 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
 	struct ixgbe_phy_info *phy = &hw->phy;
-	s32 ret_val = 0;
+	s32 ret_val;
 	u16 list_offset, data_offset;
 
 	/* Identify the PHY */
@@ -147,28 +147,23 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
 
 		/* Call SFP+ identify routine to get the SFP+ module type */
 		ret_val = phy->ops.identify_sfp(hw);
-		if (ret_val != 0)
-			goto out;
-		else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
-			ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
-			goto out;
-		}
+		if (ret_val)
+			return ret_val;
+		if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
+			return IXGBE_ERR_SFP_NOT_SUPPORTED;
 
 		/* Check to see if SFP+ module is supported */
 		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
 							    &list_offset,
 							    &data_offset);
-		if (ret_val != 0) {
-			ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
-			goto out;
-		}
+		if (ret_val)
+			return IXGBE_ERR_SFP_NOT_SUPPORTED;
 		break;
 	default:
 		break;
 	}
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -183,7 +178,7 @@ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 {
 	u32 regval;
 	u32 i;
-	s32 ret_val = 0;
+	s32 ret_val;
 
 	ret_val = ixgbe_start_hw_generic(hw);
 
@@ -203,11 +198,13 @@ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
 	}
 
+	if (ret_val)
+		return ret_val;
+
 	/* set the completion timeout for interface */
-	if (ret_val == 0)
-		ixgbe_set_pcie_completion_timeout(hw);
+	ixgbe_set_pcie_completion_timeout(hw);
 
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -222,7 +219,6 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
 					     ixgbe_link_speed *speed,
 					     bool *autoneg)
 {
-	s32 status = 0;
 	u32 autoc = 0;
 
 	/*
@@ -262,11 +258,10 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
 		break;
 
 	default:
-		status = IXGBE_ERR_LINK_SETUP;
-		break;
+		return IXGBE_ERR_LINK_SETUP;
 	}
 
-	return status;
+	return 0;
 }
 
 /**
@@ -277,14 +272,12 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
  **/
 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 {
-	enum ixgbe_media_type media_type;
-
 	/* Detect if there is a copper PHY attached. */
 	switch (hw->phy.type) {
 	case ixgbe_phy_cu_unknown:
 	case ixgbe_phy_tn:
-		media_type = ixgbe_media_type_copper;
-		goto out;
+		return ixgbe_media_type_copper;
+
 	default:
 		break;
 	}
@@ -294,30 +287,27 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82598:
 	case IXGBE_DEV_ID_82598_BX:
 		/* Default device ID is mezzanine card KX/KX4 */
-		media_type = ixgbe_media_type_backplane;
-		break;
+		return ixgbe_media_type_backplane;
+
 	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
 	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
 	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
 	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
 	case IXGBE_DEV_ID_82598EB_XF_LR:
 	case IXGBE_DEV_ID_82598EB_SFP_LOM:
-		media_type = ixgbe_media_type_fiber;
-		break;
+		return ixgbe_media_type_fiber;
+
 	case IXGBE_DEV_ID_82598EB_CX4:
 	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
-		media_type = ixgbe_media_type_cx4;
-		break;
+		return ixgbe_media_type_cx4;
+
 	case IXGBE_DEV_ID_82598AT:
 	case IXGBE_DEV_ID_82598AT2:
-		media_type = ixgbe_media_type_copper;
-		break;
+		return ixgbe_media_type_copper;
+
 	default:
-		media_type = ixgbe_media_type_unknown;
-		break;
+		return ixgbe_media_type_unknown;
 	}
-out:
-	return media_type;
 }
 
 /**
@@ -328,7 +318,6 @@ out:
  **/
 static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 {
-	s32 ret_val = 0;
 	u32 fctrl_reg;
 	u32 rmcs_reg;
 	u32 reg;
@@ -338,10 +327,8 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 	bool link_up;
 
 	/* Validate the water mark configuration */
-	if (!hw->fc.pause_time) {
-		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
-		goto out;
-	}
+	if (!hw->fc.pause_time)
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
 
 	/* Low water mark of zero causes XOFF floods */
 	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
@@ -350,8 +337,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 			if (!hw->fc.low_water[i] ||
 			    hw->fc.low_water[i] >= hw->fc.high_water[i]) {
 				hw_dbg(hw, "Invalid water mark configuration\n");
-				ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
-				goto out;
+				return IXGBE_ERR_INVALID_LINK_SETTINGS;
 			}
 		}
 	}
@@ -428,8 +414,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 		break;
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = IXGBE_ERR_CONFIG;
-		goto out;
+		return IXGBE_ERR_CONFIG;
 	}
 
 	/* Set 802.3x based flow control settings. */
@@ -460,8 +445,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 	/* Configure flow control refresh threshold value */
 	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -597,7 +581,7 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
 		}
 
 		if (!*link_up)
-			goto out;
+			return 0;
 	}
 
 	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
@@ -628,7 +612,6 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
 	    (ixgbe_validate_link_ready(hw) != 0))
 		*link_up = false;
 
-out:
 	return 0;
 }
 
@@ -645,7 +628,6 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
 				      bool autoneg_wait_to_complete)
 {
 	bool		 autoneg	   = false;
-	s32              status            = 0;
 	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
 	u32              curr_autoc        = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 	u32              autoc             = curr_autoc;
@@ -656,7 +638,7 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
 	speed &= link_capabilities;
 
 	if (speed == IXGBE_LINK_SPEED_UNKNOWN)
-		status = IXGBE_ERR_LINK_SETUP;
+		return IXGBE_ERR_LINK_SETUP;
 
 	/* Set KX4/KX support according to speed requested */
 	else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
@@ -670,17 +652,11 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
 			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
 	}
 
-	if (status == 0) {
-		/*
-		 * Setup and restart the link based on the new values in
-		 * ixgbe_hw This will write the AUTOC register based on the new
-		 * stored values
-		 */
-		status = ixgbe_start_mac_link_82598(hw,
-						    autoneg_wait_to_complete);
-	}
-
-	return status;
+	/* Setup and restart the link based on the new values in
+	 * ixgbe_hw This will write the AUTOC register based on the new
+	 * stored values
+	 */
+	return ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
 }
 
 
@@ -717,7 +693,7 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
  **/
 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 {
-	s32 status = 0;
+	s32 status;
 	s32 phy_status = 0;
 	u32 ctrl;
 	u32 gheccr;
@@ -727,8 +703,8 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 
 	/* Call adapter stop to disable tx/rx and clear interrupts */
 	status = hw->mac.ops.stop_adapter(hw);
-	if (status != 0)
-		goto reset_hw_out;
+	if (status)
+		return status;
 
 	/*
 	 * Power up the Atlas Tx lanes if they are currently powered down.
@@ -770,7 +746,7 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 		/* Init PHY and function pointers, perform SFP setup */
 		phy_status = hw->phy.ops.init(hw);
 		if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
-			goto reset_hw_out;
+			return phy_status;
 		if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
 			goto mac_reset_top;
 
@@ -836,7 +812,6 @@ mac_reset_top:
 	 */
 	hw->mac.ops.init_rx_addrs(hw);
 
-reset_hw_out:
 	if (phy_status)
 		status = phy_status;