ice: Support configuring the device to Double VLAN Mode

In order to support configuring the device in Double VLAN Mode (DVM),
the DDP and FW have to support DVM. If both support DVM, the PF that
downloads the package needs to update the default recipes, set the
VLAN mode, and update boost TCAM entries.

To support updating the default recipes in DVM, add support for
updating an existing switch recipe's lkup_idx and mask. This is done
by first calling the get recipe AQ (0x0292) with the desired recipe
ID. Then, if that is successful update one of the lookup indices
(lkup_idx) and its associated mask if the mask is valid otherwise
the already existing mask will be used.

The VLAN mode of the device has to be configured while the global
configuration lock is held while downloading the DDP, specifically after
the DDP has been downloaded. If supported, the device will default to
DVM.

Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

1 files changed, 44 insertions, 5 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 408d15a5b0e3..464ecb7b54cb 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -1518,16 +1518,27 @@ ice_aq_send_cmd(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf,
 
 	/* When a package download is in process (i.e. when the firmware's
 	 * Global Configuration Lock resource is held), only the Download
-	 * Package, Get Version, Get Package Info List and Release Resource
-	 * (with resource ID set to Global Config Lock) AdminQ commands are
-	 * allowed; all others must block until the package download completes
-	 * and the Global Config Lock is released.  See also
-	 * ice_acquire_global_cfg_lock().
+	 * Package, Get Version, Get Package Info List, Upload Section,
+	 * Update Package, Set Port Parameters, Get/Set VLAN Mode Parameters,
+	 * Add Recipe, Set Recipes to Profile Association, Get Recipe, and Get
+	 * Recipes to Profile Association, and Release Resource (with resource
+	 * ID set to Global Config Lock) AdminQ commands are allowed; all others
+	 * must block until the package download completes and the Global Config
+	 * Lock is released.  See also ice_acquire_global_cfg_lock().
 	 */
 	switch (le16_to_cpu(desc->opcode)) {
 	case ice_aqc_opc_download_pkg:
 	case ice_aqc_opc_get_pkg_info_list:
 	case ice_aqc_opc_get_ver:
+	case ice_aqc_opc_upload_section:
+	case ice_aqc_opc_update_pkg:
+	case ice_aqc_opc_set_port_params:
+	case ice_aqc_opc_get_vlan_mode_parameters:
+	case ice_aqc_opc_set_vlan_mode_parameters:
+	case ice_aqc_opc_add_recipe:
+	case ice_aqc_opc_recipe_to_profile:
+	case ice_aqc_opc_get_recipe:
+	case ice_aqc_opc_get_recipe_to_profile:
 		break;
 	case ice_aqc_opc_release_res:
 		if (le16_to_cpu(cmd->res_id) == ICE_AQC_RES_ID_GLBL_LOCK)
@@ -2737,6 +2748,34 @@ void ice_clear_pxe_mode(struct ice_hw *hw)
 }
 
 /**
+ * ice_aq_set_port_params - set physical port parameters.
+ * @pi: pointer to the port info struct
+ * @double_vlan: if set double VLAN is enabled
+ * @cd: pointer to command details structure or NULL
+ *
+ * Set Physical port parameters (0x0203)
+ */
+int
+ice_aq_set_port_params(struct ice_port_info *pi, bool double_vlan,
+		       struct ice_sq_cd *cd)
+
+{
+	struct ice_aqc_set_port_params *cmd;
+	struct ice_hw *hw = pi->hw;
+	struct ice_aq_desc desc;
+	u16 cmd_flags = 0;
+
+	cmd = &desc.params.set_port_params;
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_set_port_params);
+	if (double_vlan)
+		cmd_flags |= ICE_AQC_SET_P_PARAMS_DOUBLE_VLAN_ENA;
+	cmd->cmd_flags = cpu_to_le16(cmd_flags);
+
+	return ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
+}
+
+/**
  * ice_get_link_speed_based_on_phy_type - returns link speed
  * @phy_type_low: lower part of phy_type
  * @phy_type_high: higher part of phy_type